Cant load maps onto E71

Hi there,
I have been using nokia maps on my E71, and I have updated to the latest version, which deleted the maps present on the phone. I now cannot load any maps onto it. While connected to my PC the maps application says that the maps on my phone are corrupt, but I cannot delete them, or load new ones. I have tried deleting the CITIES folder, and deleting the qf file, but get the same error. I also reinstalled ovi suite on my PC, same error. I cannot uninstall the maps app on my phone. Any ideas how to sort this?
Thanks in advance!
Tim
Solved!
Go to Solution.

Hi All,
I hit this problem on my N82 as well (yesterday) after I reinstalled OVI Maps 3.01.
To workaround (got this from ovikovi), I did the following:
1. Close OVI Suite. Note that OVI Suite will take some time to close; you can verify if it is fully closed using Windows Task Manager. In the mean time, you can move on to the next step.
2. Detach the mobile from your computer.
3. On your mobile, go to file manager and rename the "cities" directory and "qf" file.
4. On your mobile, launch OVI Maps. Close OVI Maps a few moments after it is fully launched. Wait for it to be fully closed; it can take up to tens of seconds on my N82.
5. After checking that OVI Suite is fully closed (as per step 1), launch it back up.
6. After OVI Suite is fully loaded, attached your mobile as "PC Suite" mode and then retry after OVI Suite attaches to it. If it works, you can remove the renamed directory and file on step 3.
@John: Note that I am not sure how this will impact the preloaded map.
Hope this works for you folks, as it had worked for me. Good luck.
Cheers.

Similar Messages

I CANT LOAD PHOTOS ONTO MY IPOD PLEASE HELP!

I just got an iPod nano. I knew that i could load photos onto it, but I just recently got into wanting photos on it. I follow the directions in the ipod user guide on my computer, but when it says to go into ipod options, where it should have options for loading music, contacts, photos and callender, it doesnt have a section to load photos! So I have no way to put them on....I dont know if my iTunes knows that i have a nano or anything but does anyone know how to fix it? also would an error message saying 'Failed to locate supported file types or there are no photos found on this device', that constantly pops up when i connect my ipod to my computer, have anything to do with it?
Sorry that is so long....but if you can figure it out or know where something is that might help then reply!
Dell Dimesion2400 Windows XP
Dell Dimesion2400 Windows XP

hmmm idk. i checked for an update but it said that the version i have was the latest version. i got my ipod in the last week of december/first week in january. i opened up itunes a minute ago and it said a new update was available, which i downloaded. now it says i can put photos onto it, but then that error message on itunes pops up saying 'The iPod could not be updated. THe disk could not be read from or written to.'Would it have anything to do with another error message that i get, ever since the first time i plugged it in, reading 'Failed to locate supported file types or there are no photos found on this device'. That one i havent seen in about an hour, and i have been able to edit which photos i put on my ipod for about an hour.
Sorry its so long! You can see the photos on your ipod nano right? I only have slidshow settings when i go into the photo section. No pictures loaded onto it yet. Any ideas on whats goin on?
Dell Dimesion2400 Windows XP
Dell Dimesion2400 Windows XP
Dell Dimesion2400 Windows XP

I cant load music onto my ipod without it all locking

how do i put music on my ipod without a little padlock sign coming u next to the information at the bottom?

hmmm idk. i checked for an update but it said that the version i have was the latest version. i got my ipod in the last week of december/first week in january. i opened up itunes a minute ago and it said a new update was available, which i downloaded. now it says i can put photos onto it, but then that error message on itunes pops up saying 'The iPod could not be updated. THe disk could not be read from or written to.'Would it have anything to do with another error message that i get, ever since the first time i plugged it in, reading 'Failed to locate supported file types or there are no photos found on this device'. That one i havent seen in about an hour, and i have been able to edit which photos i put on my ipod for about an hour.
Sorry its so long! You can see the photos on your ipod nano right? I only have slidshow settings when i go into the photo section. No pictures loaded onto it yet. Any ideas on whats goin on?
Dell Dimesion2400 Windows XP
Dell Dimesion2400 Windows XP
Dell Dimesion2400 Windows XP

I cant load iBook onto my ipad1 , how do I upload iBook version 3.2

I cant upload iBook on a iPad 1 that I bought on eBay , as they say i need iOS 7 but I can only get ios5 how can I get ibook3.2

To download the iBook app onto an original iPad you need to first download it to iTunes on your computer. Once it has downloaded open the Purchased section in the App Store on your iPad, tap on the app and you should be prompted to download a compatible version.
Here is a link about iBooks and book compatibility:
iBooks: Frequently Asked Questions (FAQ) about iBooks and the iBooks Store

Problems loading songs onto shuffle

i cant load anything onto my new 512 shuffle, it just says disk cannot be read or written to. ive tried to set it to enable disk use, but it never stays checked. ive tried to do it like it said in another post, by plugging it in, taking it out and using a add hardware wizard, but there is no wizard, and that didnt work at all. is it just me or is the shuffle useless, my nano works fine with this computer. i have the latest software. any help would be much appreciated.

Hi jr502:
Welcome to the forum!
We probably need a bit more info from you, but first, read what Apple says:
Restoring iPod shuffle to factory settings
http://docs.info.apple.com/article.html?artnum=300701

Nokia Maps on E71 again - does not load a detailed...

Hello All!
I've looked through previous discussions on Nokia Maps @ E71, however did not find a solution for my problem.
Noka Maps runs on my E71, however, it does not load a detailed maps. Sattelite images work perfectly. My area is well covered with the maps as my N95 loads maps perfectly.
I messed around with Nokia Maps Loader. I even deleted \\CITIES\diskcash.
Nokia Maps restors the directory when I raun it, fixes GPS, downloads about 850kb of data...and shows my city of about 3M population as a crossroads of two highways (in case I use the Maps Loader it even does not try to download and shows the same).
In the meantime, I made Garmin XT working fine on my E71. But I still would like to use Nokia Maps as a back-up when travelling. Thank you for help!!!
PS I have E71-1, 3 weeks old, with the latest firware. I even did not have to re-flash as it came updated.
PPS I wish I was a bit stronger to have in the other pocket N95 just for a back-up

From my experience from Navteq maps if your country is in the list non-routable maps you may get nothing nevertheless Navteq states you will get map but it cannot be used for navigation.
Navteq says ask Nokia, Nokia says ask Navteq.

Loading music onto iphone and ipod touch

Hi, when i load music onto my ipod touch the artwork and music go on ok. when i load the same music from the same libary onto my iphone the music and artwork doesn't match... can anyone help please ?? thannks

Yep, I have the same issue. Its very annoying when we own two quality devices and you cant access the full potential of the products.
Shame shame

Photos loaded directly onto ipad air do not show up on PC anywhere when synced using itunes

Photos loaded directly onto ipad air using Apple camera connection kit, do not show up on PC anywhere when synced using itunes

They won't show in iTunes (iTunes is only used to copy photos to a device, not copy them off), but you should be able to copy them off either manually via My Computer (the iPad should show as a camera) or via windows camera wizard or windows live photo gallery depending upon your OS version.
Copying photos : iOS: Import personal photos and videos from iOS devices to your computer

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

How can i move a vlc movie held on my external drive onto my itunes library (so i can then load it onto my ipad to watch?

how can i move a vlc movie held on my external drive onto my itunes library (so i can then load it onto my ipad to watch?

That is the only logical conclusion. There is an easy solution. On the Mac app store download a free app called smartconverter. It is free. You just drag and drop file into app and it will convert to any file u want. I hope that foxes your issue

I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!

I found this very good
http://ipadhelp.com/ipad-help/iphone-ipad-apps-stuck-waiting/

I have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

i have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

Here you go:
You should be able to hit the "Agree" button, if you are on an iPhone right now. On a Mac, you should just left click the button where it said "Accept". I hope this helped.
To quit the app store, simply hit these keys:
Than, you should come up with this window:
Select the app store with:
a) The up and down arrow keys
b) Your cursor
Than hit the 'Enter' button twice. This should close the app store. The force quit window is also accesible through the apple logo in the top left corner of the screen. It should say:
Force Quit...

Cant load printer software

i have a epson cx 4600, in pass printer worked fine, lately i was have a few glitches with os 10.4.9, so i re installed system soft ware back to 10.3.9 ever since i cant load printer i install software from original dick it installs fine , but when i go to set up new printer through printer utility the utility goes to open then closes. I tried this several times i even re-re-installed sytem software but still nothing. i even downloaded printer utility program that was posted on this forum but nothing. i need help. my next option is to get a new printer which i really dont want to do.

Hi Myron!
Try this procedure.
* Download the most current driver from Epson Stylus CX4600, Drivers & Downloads. Printer Driver v2.0cA for Macintosh OS X (v10.2.x - 10.3.x).
* Before moving the folder & files listed below, to a Temporary Epson Trash Folder, that you should create on the Desktop, open Printer Setup Utility, and delete the CX4600.
* Quit Printer Setup Utility
* If present, move the files (Posted in CAPITALIZED Italics), to the newly created Temporary Epson Trash Folder
HD > Applications >
EPSON PRINTER UTILITY (Alias)
HD > Users > Your Home > Library > Preferences >
COM.EPSON.IJPRINTER.UTILITY.PLIST
COM.APPLE.PRINT.CUSTOMPRESETS.PLIST
COM.APPLE.PRINT.PRINTCENTER.PLIST
COM.APPLE.PRINT.PRINTERPROXY.INTERNAL_MODEM.PLIST
COM.APPLE.PRINT.PRINTINGPREFS.PLIST
HD > Library > Printers >
EPSON (Folder) Only move this folder if you have no other
Epson products
I also had a Epson OS X booklet.pdf, that I had saved in my Documents folder. You will get a new one. After the installation, I replaced it. You may not have saved your original one. It's no big deal, there's really not much in it, In fact I don't remember the last time I opened it!
* Quit ALL running Applications
* Repair Permissions using Disk Utility in the Utilities folder
* Dig out your Epson CX4600 Start Here instruction quick sheet, for reference
* Unplug the USB cable from the Mac & then from the CX4600
* Re-attach the USB cable to the CX4600 & then to the Mac
* Turn on your CX4600
* Open the epson11111 folder
* Double-click the .dmg file to create a disk image with the product name on your desktop
* Open the disk image
* Follow the prompts & instructions
* When the Vise installer opens in a window, double click it to start the install
* When the installation is complete, turn off the printer & restart your Mac.
* Repair Permisions again
* Turn on the CX4600
* Open Printer Setup Utility
* You have no printers available will appear. Click Add
* Select Epson USB in the contextual menu
* Click on CX4600 to highlight
* Add Page Setup: select All, from the contextual menu
* Click Add
* Quit Printer Setup Utility
The images that are left on the Desktop, can be trashed, unless you prefer to keep the installer.
Good Luck!
ali b

I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?

I have CS6 on my iMac. I want to load it onto an external drive to use off my Mac Air. I have the serial number. How do I do this without having to subscribe to CC?

Note the min-requirements for PS CS6 on a Mac.
Mac OS
Multicore Intel® processor with 64-bit support
Mac OS X v10.6.8 or v10.7
1GB of RAM
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
1024×768 (1280×800 recommended) resolution display with 16-bit color and 256MB (512MB for Extended) of VRAM
OpenGL 2.0-capable system
DVD-ROM drive
Nancy O.

Snow leopard 10.6.8 wifi connected, cant load webpages

hi!
just yesterday my computer showed this problem with the internet. as the title says, it is connected to the wifi network (as it has always been) but i face the following problems:
i cant load new webpaged in google chrome and firefox (which are the ones that I actually use)
i can load webpsged that were already saved as bookmarks.
i can load webpages in safari
my icon for dropbox shows a red cross icon
utorrent works just fine
outlook (the software) get's my new emails
what i tried to solve it:
checked that my wifi networks work perfectly fine with other devices in the house
restart computer
changed DNS to one that was suggested in another thread in this discussions site
resetting NVRAM/PRAM
checked that it is updated
so, i read that some people had similar problems with the new 10.8.2 for mountain lion, or sth like that... but in my case i have snow leopard so i don't think thst's the problem

Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Cant load maps onto E71

Similar Messages

Maybe you are looking for