Cant open RAW files

Elements 12 will not let me open my RAW files from my nikon d7100 camera? it says no updates available

If in the pse 12 editor you go to Help>About Plug-In>Camera Raw, what version does it say?
(it should say Version 8.0)
Older versions of nikon transfer are known to corrupt nikon files from newer cameras in such a way that adobe camera raw can't read them.
As an experiment, you could copy some files from your camera to your computer, without using nikon transfer and see if they open in the pse 12 editor.

Similar Messages

I cant open raw files in my cannon 7d

i have a cannon 7D cant open raw files in elements 11

Here are what versions of Camera Raw support what models of cameras:
Camera Raw plug-in | Supported cameras
Here are what versions of Adobe software use what versions of Camera Raw:
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Cross-referencing these two lists, it would appear that the PSE11 updated to its maximum ACR version of 8.0 will read DMC-G5 raws, and XZ2 raws, but not 70D raws, which you'll need PSE12 updated to ACR 8.3 to work with.
What version of ACR do you have for your PSE11? Use Help / About Plug-ins / Camera Raw to find out.

Sony NEW RX10 & iPhoto Cant open RAW files

Hey Guys, I know that not ALL RAW files are equal! I just picked up a NEW SONY RX10 and its shooting RAW files in Sony's ARW format.. I see that the NEW a7's are updated in OSX updates, Im assuming that the a7's and the New RX10 are the same ARW format, but I cant open these files in Preview and Iphoto wont see them either! Im using OSX 10.8.5 (ML) and Iphoto 11 (9.4.3) (720.91) Is anyone else having this issue with a RX10 or newer Sony camera with ARW files... Please reply! I really would like to shoot in RAW and use iPhoto to edit! I guess not ALL SONY .ARW are equal????

Im assuming that the a7's and the New RX10 are the same ARW format,
There you go - that is an incorrect assumption (as most assumptions are - as you know when you assume you make an ***ume out of ***ume & assume) - every RAW format for every camera is different and requires specific support for tha tcamera - notice in the support list that many different cameras in the same family are listed seperatly
Usually Apple releases Sony RAW support pretty quickly since Sony is a major manfactuer of consumer and professional cameras
Tell Apple - iPhoto menu ==> provide iPhoto feedback
The Sony software that came with the camera may help (although my experiance is that Sony has poor to non-existance support for Macs) and possible the Adobe RAW converter can help until Apple releases the required update
And it is very possible that the update will only apply to Mavericks and iPhoto 9.5.x so it is possible that you will have to upgrade your OS and iPhoto (both free) - when you do be sure to backup first
The current Mavericks list is at http://support.apple.com/kb/ht5955
LN

I cant open raw files

Some months ago I was able to open raw files. Now I cant, a message sais: "error PS express is unable to open this file"
What can i do?

But previous versions of PS Express did it. When I bought PS for my iPad, I used to edit raw images without any problem. Thats why I bought it in the first place! I only shoot photographies in raw!
Can I obtain go back in the PS version? I dont like it this way at all.

Adobe Bridge CC with OSX Yosemite - and i cant open RAW Files in Camera Raw. Does anybody have the same Problem?

If i try to open any File with Camera Raw exactly nothing happens.

What exact camera make and model?
What specific, exact version of Adobe Camera Raw (ACR) plug-in?
What specific, exact versions of Bridge and of Yosemite?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cant open RAW files from Nikon D300S

I have a Nikon D300S. I can't open RAW files in Adobe CS4. Screen message is 'Could not complete your request because it is not the right kind of document'. I understood from this Adobe website that the fix was to download Camera Raw 5_5. I've done that and the same screen message appears. What am I doing wrong / what do I need to do to fix the problem.   If you can list a step by step process in the plainest terms possible then that would be appreciated. Thanks

Firstly thanks to all who are trying to assist. I appreciate your spending time on this.   Hopefully this additional info will help:
(1) the camera is a Nikon D300s. I'm not aware of any model details beyond this   It was bought c9 months ago.
(2) I bought Adobe CS4 before buying the Nikon D300s.   I've used CS4 to convert RAW files from my other cameras - a Nikon D2H and a Minolta Dimage - without any bother at all.
(3) CS4 is loaded onto my Windows based PC in to the Windows 'Downloads' folder. I'm not using any Mac computers.
(4) The procedure I followed to upload the Adobe files was:
(a) I clicked 'Help' - About Plug-in - Camera Raw. Info on screen says 'Version 5.0.0.178
(b) In looking at the Adobe support web pages (I can't now find which one it was) it indidated I should check for updates. I downloaded and saved Photoshop_11.0.2_mul_AdobeUpdate. Its filed in my 'Downloads' folder in Windows.
(c) I used the Adobe search engine using an enquiry "CS4 Camera Raw Updates'. This produced a page with box at the top and 2 headings 'Digital camera raw file support' and 'Adobe camera raw and DNG convertor downloads'. Under this second heading there are choices to click for Widows and Mac OS. I selected Windows. The result produces a list of Updates / Programmes.   I selected Adobe DNG Convertor 5.5 update and Camera Raw 5.5 update and downloaded both into my Windows 'Downloads' folder. I chose these because according to the list info they were relevanf for the Nikon D300s. I attempted to open a photo taken from the D300s in Raw and the photo would not open - the usual '......not the right document' message.
(d) from Forum contributions I then deleted version 5.5 of both files downloaded at (c) above and installed version 5.7 and then tried to view the Raw image again, Same result. This is the up to date position as at this post.
Have I missed a step somewhere? eg should there be a step forcing a link from the downloaded updates to CS4 or do the downloads automatically link to CS4 when the download is complete?
Any furhter help you can offer is appreciated. Thanks.
Message was edited by: fraserireland

Cant open RAW file

I have Photoshop Elements 5.o and trying to open some raw files that were shot with a nikon D80 in raw + jpeg. When up loading from card reader Photoshop gets all the jpeg but when it comes to the NEF files I get a pop-up saying " cannot open 1234.NEF' because its the wrong type of file"
Is this a problem with Photoshop or my camera? I am running under windows XP with SP2.I have downloaded the new version of raw 4.1 for Photoshop and this did not help.
Can you help me with this?
Thanks,Mike

Ramon,
Your story about the Windows Recycle Bin bothered me. It didn't sound like normal behavior. So here on my work computer where I have Photoshop CS2 installed, I took the camera raw plug-in and put it in the Recycle Bin and then started Photoshop. I went to Help/about plug-ins and Camera Raw wasn't even on the list. I tried opening a DNG file and got the expected "wrong kind of file" message that is displayed when there is no ACR installed or the wrong version is installed. I restored Camera Raw.8bi from the recycle bin and started Photoshop again, and then everything functioned normally. So my suspicion is that there was something else going on on that computer that you spoke of. Yes, I understand from others I have spoken with that the Mac is a much more efficient operating system. But I am 64 years old and have more than 20 years experience in programming for the PC. Maybe if I had another 20 years that I expected to be spending working on computers then it would be reasonable to consider changing. But at this point I just don't have the desire to make the switch. A lot of people have problems with Windows (I think) because they don't take the time to think about what they are doing. The argument can be made with the Mac you don't even have to think about what you're doing. That could very well be true. But I'm satisfied as I know you are. Anyway, I just thought I would share this little experiment.

Cant open raw files in ps cc

Ok, I think I had to be signed in to ask.
I upgraded from PSE 12 to Photoshop/Lightroom cc. Did this today. Loaded some of my actions in PS.
But it won't open my raw files.
I have a 70D Canon. Says I need camera raw 8.2 or higher. There wasn't just an 8.2... there WAS a dng converter - is that what I'm supposed to download? Well I did. Now when I try to open it, I get a pop up that says I have to have windows 7.... I have windows vista.
help..... If I can't get this working I will just go back to PSE....

You may be able to install the ACR 8.3 update from this page:
http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html
If you mean you signed up for the Photography Plan at $10/month that includes LR 5 and PS-CC, that’s probably not very useful to do on Vista since the newer versions of software require OSX 10.7 or Windows 7.

Cant open raw files in elements 11

i have just purchased a canon 6d and when i launch elements 11 it just goes straight to the editing suit not the raw editor, how can i get over this.

What operating system are you using?
What is your screen resolution set at?
Generally that indicates your screen resolution is to low to use the camera raw dialog and thus pse 11 skips the opening the acr dialog and just opens the camera raw file straight into the pse 11 editor.

I cant open raw files fron cannon 700d

Using CS5 which says it is "up to date" Bridge and Camera Raw all say they are "up to date" but are not the latest version and wont open the files from the Cannon 700D

The Canon 700D was first supported by Adobe Camera Raw 7.4 which is only compatible with CS6 and higher
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
ACR7.4 is not compatible with CS5.
Your choices:
Upgrade to CS6
Purchase Lightroom 5. Open the Raw files from the 700D and convert them to TIFFs. Edit the TIFFs in CS5.
Join the Cloud
Join the Photoshop Photography Program
https://creative.adobe.com/plans/offer/photoshop+lightroom
Convert the Raw files from the 700D using the free Adobe DNG Converter. Then edit the DNGs in CS5
http://www.adobe.com/products/photoshop/extend.displayTab2.html

Cant open raw file in pse10

how can I open a raw (orf) file created by olympus ep5 camera in pse 10
kevin

Hi,
A raw file from the Olympus E-P5 cannot be opened directly in PSE 10 as it it a new camera.
You need to
1) Buy PSE 12
or
2) Download and install the free Adobe DNG converter
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695
Once installed, use the converter to convert the ORF files to DNG files and then import the DNG files into PSE 10.
Brian

Cant open RAW files once editited

Hi im having a problem i have just bought a new computer with windows 8.1 64bit and i had a 32bit on my old computer , now program installed ok and updated , But when i open a RAW file then edit it to what i want and then ask to open in elements it comes up saying Could not complete your request because of program error , Please help .
John W Cartwright

John W. Cartwright
Your question cannot be answered without clarified details.
Is your program Photoshop Elements or Premiere Elements and what version? Windows 8.1 64 bit seems to be the computer on which it is running.
What do you mean by RAW file? Raw image still file or an unprocessed video file from a camera?
I suspect that you have some version of Photoshop Elements on Windows 8.1 64 bit, have edited a raw image still in Camera Raw, and cannot get the Camera Raw edited image in the Photoshop Elements Editor. Did I guess correctly? If so, you have posted in the wrong forum.
Your thread has somehow been posted in the Adobe Premiere Elements Forum (video editing) and not the Adobe Photoshop Elements Forum.
If I am correct on the situation, please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
Raw image still can be imported into Premiere Elements as source media, but cannot be edited in Camera Raw without Photoshop Elements being installed on the same computer.
Please review and consider.
Thank you.
ATR

Still cant open RAW file in bridge in CS3

I am on a g4 powerbook and have both cs3 and cs2 installed on my computer. In cs2 bridge i can double click a raw rile and open it in bridge, and i can also paste my raw adjustments to said file in bridge. I cant do any of this in cs3. i ran the script to delete the beta and tried suggestions in other posts, but no luck. anyone have an idea?

Have you installed the ACR plug in for CS3 (current ACR 4.4) in the right place according to the install instructions?
If you look in PSCS 3 in the menu under Photoshop - About Plug ins it should show you Camera Raw with the version number and only one install.

Why cant I open raw files in photoshop CS6

I just downloaded photoshop but cant open raw files in CS6 with my nikon D600

You may want to check out this thread, which deals with problems opening RAW files from a D600.

Photoshop cs3 cant open CR2 files

i cant open CR2 files in photoshop cs3 ( nope in bridge cs3)
please tell me what should i do or download?
thank you

Troubleshooting 101: What OS? What camera? What version of Camera Raw do you have installed?
Odds are you either need to update Camera Rae to 4.6 (the last for CS3) or download the DNG Convertor 5.4 to convert recent (as in the latest Rebel or 5D M3's).
A place to stop regarding compatibility would be the Camera Raw product page and if you had bothered to mention your OS we could point you to downloads as well.

Cant open RAW files

Similar Messages

Maybe you are looking for