Cant restore my Ipod touch 4 generation?
Cant restore my I Pod Touch 4 Generation
Resolve specific iTunes update and restore errors
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Similar Messages
-
I tried to restore my ipod touch 2nd generation and now it won't sync to itunes. On the screen is the USB end of the cord and the iTunes logo over it.
I have turned it off and on, held the off button down and the select button down but it still comes up with that picture on the screen. Have I broken it?
Please help.
MimiIt means the device is in recovery mode. You'll need to reconnect it to iTunes and restore it again.
You may need to connect it in recovery mode manually using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
Can someone help me I cant restore my ipod touch
Please someone help me I cant restore my Ipod touch, it keeps giving me this error saying cant restore Ipod maybe corrupted or not compatible so please help if you can I don't want to restore my Ipod as new or from a very old back up and this is not the first time this has happened, its been going on for some time and this is my newest Ipod touch, 5th one by the way yea I know you think I don't take care of my stuff but no its allll apples fault but two, First time was button got jammed then screen cracked don't know how, second got stolen, third apple gave me one that has no sound and when I came back they made my dad pay for the new one which made no since at all, don't remember what happened with the other two so yea just hope someone can help me with this problem and no It has not been jailbroken can't even if I wanted to no jailbreak for 7.1.1 so yea its an 5gen Ipod touch so please help thanks.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
If you get the corrupt error message then go to iTunes>Preferences>Devices and select the backup and delete it.
Next
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
am trying to restore my Ipod touch 5 generation but I am receiving an error message that says your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
I am trying to restore an Ipod Touch 1st generation and I am receiving an error code of 1, How can I resolve?
i have the same problem ipod touch 1st gen and its 1 not -1
can you help please?? -
While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help
Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
Could I try anything else ?
Cheers Chris -
I cant update my ipod touch 2nd generation
i cant update my ipod i have the most up to date i tuns but it wont let me up date my ipod from ios 2 to ios 4.2.3
Verify you have a 2G and not a 1G. The 1G does not have volume buttons one the upper left edge and does not have an internal speaker
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
Identifying iPod models -
I got an iPod touch 1st generation and downloaded loads of apps, some paid some free. A few weeks ago I restored the iPod touch and when I went to download apps that I had already owned it said I needed a newer iOS. It says I need iOS 4.3 and I have iOS 4.2.1 and when i tried to update it says I have no software updates.
Do you have any of those apps saved on your computer, in iTunes?
It is true that your 1st generation iPad is already now running the highest version of iOS it can. It cannot be updated further. If the developer has pulled the older versions of their apps and now only offers versions requiring iOS 5 or 6 then you will not be able to run those apps any longer (unless you kept backup copies of the older versions in iTunes on your computer).
Developers determine what version(s) of their apps are in the App Store. As many have updated their apps to take advantage of the enhancements in iOS 6 , they've pulled their older versions and no longer support them. -
TS3694 i cant restore my ipod touch
i cant restore my ipod touch
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
Why can't i restore my ipod touch 4th generation
why can't i restore my ipod touch 4th generation
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
HT1212 Restoring an iPod touch 5th generation to factory defaults
How do I restore an iPod touch 5th gen? I went through the procedures and it is still in disabled status. I do not have a backup on iTunes.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
If the above isn't working for you:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I cant update my ipod touch 3rd generation
when I try to update the IOS version on my ipod touch 3rd gen. it goes through the whole process then says "unkown error occurred (-1.) unable to restore ipod"
it only has IOS 2.2 so I cant download any games or apps, it wont even let me download ibooks!? please help!Error -1 usually indicates a hardware issue. Resolve iOS update and restore errors
-
I cant restore my ipod touch 5g
i was updating my ipod to ios 6.1.2 and i was restoring it but it kept saying ipod is in recovery mode you cant download itunes but when the restore had finished help i dont know what to do
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I cant update my ipod touch 4th generation 4.2.1
I can't update my ipd touch 4th generation 4.2
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 4G (has cameras) to 6.1.5 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
Wht happens when you try? Error message?
Maybe you are looking for
-
Contents of a Data-Block.
Can anyone please tell me in details what are stored in a data block?
-
TS3048 mouse buttons do not work
I had this same problem on my MacBookAir and now I have it on the iMac. The left and right click functions of the mouse stop working in Yosemete. Has anyone else experienced this and how did you correct it? Thanks,
-
How do I attach iCloud file to e-mail (Mac)?
Hi all, This is something I have failed to figure out, and may not be a feature, but I was wondering if the Mail app on Mac (Mountain Lion) can access icloud files, for example those created in Pages. When I click on the attachment icon in a new emai
-
Authorized or not authorized??
I am trying to play a song on my computer at work. I believe I originally bought the song on a different mac a few years ago. When I try to play the song it says the computer is not authorized and asks me to log in to authorize this computer. It auto
-
hello i have an erreor in my program: MemoryStream oStream; MemoryStream oStream; CrystalReport1 crt = new CrystalReport1(); string customerFilePath = Server.MapPath(" DsActAction.xml"); DataSet ds = new DataSet();