Cant Stop Flash Page from flashing repeatedly (making website)
Well first off here is my script so far on the page:
http://pastie.org/2896198
Using Pastie to keep amount of text on thread low to make things easier to read.
Here are the errors I get everytime I try to debug or Test Movie:
http://uploadpic.org/storage/2011/4YMJ4ivivUUNtZZouD62dH8uT.jpg
Here is the fla file:
http://www.mediafire.com/?1k664584nyhab74
Also maybe if you can help a bit with it heres the check list that this is graded on. Also no I am not trying to make you guys do my work for me its just he gave us this project but I have been at work (17) and unable to finish it at all. Please help I dont want a bad GPA this ending semester.
http://s3.amazonaws.com/edmodo/Slough/checklist2.pdf?AWSAccessKeyId=0CRWCTVCWB17SQPJGB82&E xpires=1321850730&Signature=XebyjmJdAN41LxokZVOWySCQWLE%3D
If you know how to fix the problems if you could please fix them an upload them back and send it.
I have been working on figuring this out all weekend an cant get it still.
If you are able to help thanks so much because I have to go to bed right now an turn this project in for school tommorow and I really want an A otherwise I will get a F for final semester.
The project is also due tommorow:(
(THIS WAS ALSO MADE IN FLASH PROFESSIONAL CS4)
You have your actionscript pasted into three different places. You only need the one at the bottom of your timeline in the Actions layer. Remove the others.
You have two sets of frame markers, one set in the Pages layer, which is correct and a second set in the menu layer where each frame is labeled "page". Get rid of those markers.
Extend the frames in the Actions layer to match the rest of the movie. Get rid of the extra keyframes in the background layer.
Similar Messages
-
Photoshop: How do I stop the image from flashing black?
How do I stop the image from flashing black when i am working on it
This is a problem with Win8. Update your video card driver from makers site. If that does not help in preferences set GPU to basic.
-
Can I stop the flashbulb from flashing when incoming messages appear?
Can I stop the flashbulb from flashing when incoming messages appear?
Yes. Just turn it off in settings.
You should read the manual:
iPhone User Guide (For iOS 5.1 Software) -
Need help stopping home page from appearing
Hello:
I've designed and programed the site www.pawsandclawspets.com
but I can't figure our how to keep the home page from flashing when
going from one page to the next. I have all my movies loading onto
a level above it and don't want to hide the home page entirely as I
am using the nav at the top on all the pages.
Any thoughts?
Thanks!boss33 wrote:
> Hi pple, need help here.
>
> Trying to make a site that uses scriptaculous and a few
other scripts like
> prototype and a few more.
>
> The thing is I can't seem to get the first image to
randomize on the site. So
> I've decided to discard that idea and move over to
making the home page one of
> my other pages specifically the "beauty" or as I call it
the art page.
>
The first image on your page is this:
<img id="logo" src="
http://test.inspiringmen.com/images/logo.png"
... />
onload=function(){
var imgs=[
"/images/logo.png",
"/images/another.png",
"/images/yetanother.jpg",
"/images/onemore.jpg"];
document.getElementById("logo").src=imgs[(+new
Date())%imgs.length];
This assumes that the "images" folder is at the root level of
your site.
You may add or remove image paths from the "imgs" array at
will.
Mick -
866VAE - cant acces web pages from LAN
Hi everyone,
im fighting with Cisco 866VAE-K9 for few days. I have got ADSL2+ line in Cisco, i can ping anything from router (like 8.8.8.8 or www.google.com), test of connection in CCP runs successfully, but i cant acces web pages from LAN computers. From LAN i can ping to any IP adress in internet (like 8.8.8.8), but i cant ping or access domain names of web pages (like www.google.com). I know there is probably something wrong in my config, but after 2 days of googling i cant find where the problem is. Can anybody help?
Here is my running config:
Building configuration...
Current configuration : 8181 bytes
! Last configuration change at 11:31:15 UTC Fri Mar 6 2015 by admin
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname cisco_866vae
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 xx
enable password xx
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
wan mode dsl
ip port-map user-protocol--1 port tcp 3500
ip name-server 8.8.8.8
ip cef
no ipv6 cef
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
crypto pki trustpoint TP-self-signed-2886901321
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2886901321
revocation-check none
rsakeypair TP-self-signed-2886901321
crypto pki certificate chain TP-self-signed-2886901321
certificate self-signed 01
controller VDSL 0
class-map type inspect match-any SDM_BOOTPC
match access-group name SDM_BOOTPC
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all ccp-cls--1
match access-group name all
class-map type inspect match-all ccp-cls--2
match access-group name all1
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-any SDM_SSH
match access-group name SDM_SSH
class-map type inspect match-any SDM_HTTPS
match access-group name SDM_HTTPS
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any SDM_SHELL
match access-group name SDM_SHELL
class-map type inspect match-any sdm-cls-access
match class-map SDM_HTTPS
match class-map SDM_SSH
match class-map SDM_SHELL
class-map type inspect match-all sdm-access
match class-map sdm-cls-access
match access-group 101
policy-map type inspect ccp-policy-ccp-cls--1
class type inspect ccp-cls--1
pass
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
pass
class class-default
drop
zone security out
zone security in
zone-pair security sdm-zp-in-out source in destination out
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-out-in source out destination in
service-policy type inspect ccp-policy-ccp-cls--2
interface Loopback0
ip address 192.168.100.1 255.255.255.0
zone-member security in
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 8/48
oam-pvc manage
pppoe-client dial-pool-number 1
interface Ethernet0
description $ETH-WAN$
no ip address
shutdown
pppoe-client dial-pool-number 2
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface GigabitEthernet0
no ip address
interface GigabitEthernet1
description $ETH-WAN$$FW_OUTSIDE$
ip address dhcp client-id GigabitEthernet1
ip tcp adjust-mss 1412
shutdown
duplex auto
speed auto
interface Vlan1
description $FW_INSIDE$
ip address 192.168.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security in
ip tcp adjust-mss 1412
interface Dialer1
no ip address
interface Dialer2
description $FW_OUTSIDE$
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
zone-member security out
encapsulation ppp
dialer pool 1
dialer-group 3
ppp authentication chap pap callin
ppp chap hostname o2
ppp chap password 0 o2
ppp pap sent-username o2 password 0 o2
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat source list 101 interface Dialer2 overload
ip nat inside source static tcp 192.168.7.39 3500 interface Dialer2 3500
ip nat inside source list 101 interface Dialer2 overload
ip nat inside source route-map MAP_ACL interface Dialer2 overload
ip route 0.0.0.0 0.0.0.0 Dialer2 permanent
ip route 192.168.2.0 255.255.255.0 192.168.7.3 permanent
ip access-list extended NAT_ACL
deny ip 192.168.0.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.0.0 0.0.0.255 any
ip access-list extended SDM_BOOTPC
remark CCP_ACL Category=0
permit udp any any eq bootpc
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
ip access-list extended SDM_HTTPS
remark CCP_ACL Category=1
permit tcp any any eq 443
ip access-list extended SDM_SHELL
remark CCP_ACL Category=1
permit tcp any any eq cmd
ip access-list extended SDM_SSH
remark CCP_ACL Category=1
permit tcp any any eq 22
ip access-list extended all
remark CCP_ACL Category=128
permit ip any any
ip access-list extended all1
remark CCP_ACL Category=128
permit ip any any
access-list 2 remark CCP_ACL Category=2
access-list 2 permit 192.168.7.0 0.0.0.255
access-list 101 remark CCP_ACL Category=128
access-list 101 permit ip any any
access-list 101 permit udp any any eq domain
access-list 101 permit udp any eq domain any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
dialer-list 3 protocol ip permit
mac-address-table aging-time 15
route-map MAP_ACL permit 10
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 40 0
password xxxxxxx
transport input telnet ssh
transport output telnet ssh
scheduler allocate 60000 1000
endHi,
I would be happy to help but I have one question first: Your configuration contains a lot of cruft generated from SDM/CCP and I am not sure if any of that is really required by you. Do you believe you would be fine with having this entire configuration trimmed down and do just what's supposed to do (routing and NAT), and we had security measures added in later? Just by the way, I do not believe you need the zone-based firewall. In your simple setup with just a few inside/outside interfaces, it does not add any real value apart from making the configuration virtually unreadable. We can easily do the same with IP Inspect.
Best regards,
Peter -
Hello
I have added a blue textured background to my RoboHelp pages
When I view the pages, they flash white and then load the blue background.
the background image is on 19kb.
Does anyone know of a way to make it so my pages wont flash?
Thanks so much inadvance for any advice or helpYeah, I can be a brat.
On a more serious note, I'm not sure of exactly what you are seeing. Are you able to use something like Jing or Screenr to record a video showing us? You can just post a link to the video.
Click here for Jing
Click here for Screenr
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
Switching pages from flash-gui
I tried to switch to a page using a flash-button inside an rma which functions as a gui.
To do so I use an external interface call:
var jsCaller:Object = ExternalInterface.call("eval","this.pageNum = 1;");
I use eval frequently to call various methods within my document-script and so far it has never failed me. However, in this case, when I push the button, acrobat crashes.
It seems to switch to the page (at least the scrollbar indicates that) but before anything from that page is actually shown, acrobat crashes. The version I use is Acrobat 9 Pro Extended (version 9.1.0). I tested this in reader 9.4 and found the same behaviour.Yes it does, and it will. The problem is that by switching pages the Flash annotation is disabled, but both Flash and Acrobat expect the externalInterface function to have a return value. As the Flash Player instance is killed halfway through the handshake, it takes Acrobat down with it. Probably should've fixed it, but it's not a major priority, as;
(1) hardly anyone uses it, and if they do they find out very quickly they can't
(2) it crashes in a safe-ish way, so there's no exploitability in the bug
One way around it is to call a doc-level function from AS which itself fires off a short delayed function call to set the pageNum value, so you can return the handshake to Flash *before* the page changes and the link gets severed. If your SWF is running in a pop-up window and set to manually disable, then it'll be fine. -
Re: Switching pages from flash-gui
One way around it is to call a doc-level function from AS which itself
fires off a short delayed function call to set the pageNum value, so you
can return the handshake to Flash *before* the page changes and the
link gets severed.
Once again an extremely simple task made incredibly complicated. So this is a known bug noone cared to fix? Not quite what I would expect considering the retail-prize of Acrobat Pro Extended.At least I know what's going on now.
So thanx anyway.
Is there a chance this is at least fixed in Acrobat X?
BTW: A separate forum on Acrobat Flash would probably be a good idea (just like there is one for 3D-Features). I'm always unsure where to post such problems specifically involving flash in the acrobat context. As the documentation on this subject is very limited imho, there's probably loads of problems to discuss.Yes it does, and it will. The problem is that by switching pages the Flash annotation is disabled, but both Flash and Acrobat expect the externalInterface function to have a return value. As the Flash Player instance is killed halfway through the handshake, it takes Acrobat down with it. Probably should've fixed it, but it's not a major priority, as;
(1) hardly anyone uses it, and if they do they find out very quickly they can't
(2) it crashes in a safe-ish way, so there's no exploitability in the bug
One way around it is to call a doc-level function from AS which itself fires off a short delayed function call to set the pageNum value, so you can return the handshake to Flash *before* the page changes and the link gets severed. If your SWF is running in a pop-up window and set to manually disable, then it'll be fine. -
How to stop my screen from flashing
How do I get my 2nd gen I Touch screen from flashing?
Try here:
iOS: Not responding or does not turn on
If you can't turn the iPod off, let the battery fully drain. After charging for at least an hour try again.
Last, make an appointment at the Gebnius Bar of an Apple stoe since it appears you have a hardware problem. -
How to stop my page from scrolling vertically
I currently have my page configured so that the header, footer, and links on the left hand side are all framed and positioned absolutely. This allows me to just have the content in the center of my page scroll.
It works wonderfully, however on some pages (such as one where I have a photo gallery), the page will scroll past the gallery, and either appears very long, or the content stops, and you can see the background of the page. It's difficult to explain, so I have included photos to demonstrate. I would simply like to prevent my page from scrolling PAST the content (gallery in this case) and onto the excess space.
Even if I extend the min-length or max-length value of the page, it only makes the white area even longer so it scrolls even further down the screen. Any suggestions would be apprecaited, and I can include the .css and html if necessary as well.
Regards,
-DaveI'm sorry Nancy, I'm not exactly sure how to do that.
You can view my page at http://www.dvionline.com
but obviously you can't see the .css in there.
If it makes it anymore clear, I have posted it here:
@charset "utf-8";
/* CSS Document */
/***************STRUCTURE***************************/
/*Reset*/
margin:0;
padding:0;
/* Reset header position to fixed for real browsers such as Firefox*/
body>#header_wrap{
position:fixed;
/* Reset footer position to fixed for real browsers such as Firefox*/
body>#footer-wrapper{
position:fixed;
/* Sets minimum width for the smallest resolution available */
body{
min-width:640px;
background-color:#222222;
min-height:900px;
/* This containts the links to the left */
#menu_wrap_left{
float:left;
height:228px;
width:100px;
margin:0px auto;
padding:0px;
position:fixed;
/* 994px because of the 3px margin on each side of the border. Min width is 736px because that is the size of my large monitor */
#content_wide{
width:994px;
margin:85px auto;
border:3px solid #c3c4c5;
min-height:736px;
background:#d8d7d7;
/* Absolute positioned header for all browsers*/
#header-wrapper_75px{
position:absolute;
top:0;
left:0;
width:100%;
height:85px;
position:fixed;
#header{
height:85px;
width:1000px;
margin:0 auto;
background:url(../Images/Defaut%20Images/yellow_white_background__85px.jpg);
/* Logo image */
#header_logo_over_links{
position:absolute;
margin-left:5px;
margin-top:0px;
width: 137px;
height:77px;
display:block;
z-index:2;
background:url(../Images/Defaut%20Images/resize_logo.gif) no-repeat
/* Contains the footer, and in a static position */
#footer-wrapper{
width:100%;
p\osition:absolute;
bottom:0;
left:0;
height:24px;
/* Used for the 1000px site */
#footer_wide{
width:1000px;
height:24px;
margin:0 auto;
background:#edece7;
color:fff;
/* EVERYTHING ABOVE THIS LINE IS USED IN THE TEMPLATE */
/* Used on all of the flash galleries */
.center_flashMedia{
margin:0px auto;
padding:0px;
display:block;
/* Used on the top of the CONTACT page */
.bold_contact_header{
font-size: 24px;
font-weight: bold;
color: #6785BB;
text-align: center;
margin-left:auto;
margin-right:auto;
display:block;
/* also used on the CONTACT page */
.center_contact_address{
text-align: center;
margin-left:auto;
margin-right:auto;
display:block;
padding: 5px;
/* used on the CONTACT page */
#container_contact{
display:block;
padding: 5px;
margin-bottom: 0px;
display:absolute;
margin-top:90px;
/*used on the CONTACT page */
.bold_contact{
font-size: 16px;
font-weight: bold;
color: #6785BB;
/* This holds just the text for the HOME page */
#home_text_container{
width:450px;
height:450px;
border:none;
padding:20px 0px;
float:right;
position:relative;
margin-right:14px;
/* used on the HOME page */
#home_image_container{
background:url(../Images/Defaut%20Images/home%20image%20shadow.jpg) no-repeat;
width:450px;
height:395px;
display:inline-block;
margin-left:14px;
padding:20px 0px;
margin-top:30px;
/* Used for the text on the HOME page */
.index_text_16px{
font-size:16px;
font-weight:normal;
font-family: Arial, Helvetica, sans-serif;
/* used on the HOME page */
.project_header{
font-family: Arial, Helvetica, sans-serif;
font-size: 20px;
font-weight: bold;
/* used on the PHILOSOPHY page */
#philosophy_wrap{
width:800px;
height:100%;
margin:20px auto 0px auto;
padding:10px 20px 0px 10px;
border:3px solid #c3c4c5;
background: #d8d7d7;
/* Used on CONELLE MEMBERS, PHILOSOPHY, and PROJECT TEAMS pages */
.president_font{
font-family: Arial, Helvetica, sans-serif;
font-size: 16px;
font-weight: bold;
padding:10px;
vertical-align: text-top;
/* used on PHILOSOPHY page */
.centered_philosophy_header_text{
font-family: Arial, Helvetica, sans-serif;
font-size: 16px;
font-weight: bold;
padding:5px;
vertical-align: text-top;
text-align:center;
/* used on the PRILOSOPHY TEAMS and SERVICES page */
.project_text_index {
font-size:14px;
font-weight:normal;
padding: 0px;
height: 150px;
width: 250;
font-family: Arial, Helvetica, sans-serif;
/* used on PHILOSOPHY page, to keep space around the images */
.philosophy_img_padding{
padding:10px 5px;
border:#C3C4C5 solid 3px;
/* used on PROJECT TEAMS page */
#project_teams_wrap{
width:800px;
height:100%;
margin:10px auto 0px auto;
border:3px solid #c3c4c5;
background: #d8d7d7;
z-index:-1;
/* Used on PROJECT TEAMS page */
.project_text{
font-size:12px;
font-weight:normal;
font-family: Arial, Helvetica, sans-serif;
line-height: 18px;
/* used on the SERVICS page */
.services_header{
font-family: Arial, Helvetica, sans-serif;
font-size: 20px;
font-weight: bold;
/* logo image to the right on the CLIENT SERVICS page */
#client_services_img{
float:right;
padding:5px;
clear:left;
display:block;
background:url(../Images/Defaut%20Images/project%20teams/client_services.jpg) no-repeat;
width:300px;
height:226px;
margin-left:15px;
/* Background for the CONELLE MEMBERS page */
.horizontal_bar_grey{
height:200px;
width:800px;
margin:0px 5px 15px 30px;
background:url(../Images/Defaut%20Images/horizontal_bar_grey.gif) no-repeat;
.align_left{
float:left; -
Launch flash builder from flash cs5 don't work
hi
I have a trial version of flash builder (eclipse plug-in) and registered flash cs5 pro
I'm trying to open a new AS3 class like in this tutorial: http://tv.adobe.com/watch/learn-flash-professional-cs5/using-flash-pro-and-flash-builder-t ogether/
and it doesn't work.
at first it did asked if I want to edit the file in flash builder or not, and it didnt work.
now it won't even ask.
what can I do?
and also I cant open a flash proffessional project in flash builder, it says "This feature requires Adobe Flash CS5 or higher to be installed."
but it is installed!
frustrated...I gave this a shot, using CS5, and when I started a new AS3 file I got the appropriate prompt asking me which application should edit my file...
Flash Pro
Flash Builder
When I chose Flash Builder, (which I had already running), it opened the new AS3 file there with no problems. Interestingly, when I closed FB, and with Flash Pro created a new AS3 class, I wasn't prompted (and the AS file opened in Flash Pro) - so it does require that FB be running, or else Flash Pro will be the default editor.
For the issue of Flash no longer prompting you "Who" will open a new file, you can change that here:
Edit > Preferences > ActionScript > Several items down is the Class editor. Change that to Flash Builder
If you still have problems...Are you able to successfully launch Flash Builder 4 by itself? Or has the trial expired?
Last but not least, it's worth mentioning another fantastic AS editor (in case you don't really need FB, and/or your trial runs out):
http://www.flashdevelop.org/wikidocs/index.php?title=Main_Page -
How to stop a page from loading?
Does anyone know if there's a way to stop a webpage from loading (i.e. before it finishes)..? This page, for example:
http://sportsillustrated.cnn.com/baseball/mlb/gameflash/2011/06/04/36460_recap.h tml
When I click on the "X" (or type Cmd+period) i want to cease ALL communication with whatever website is in the address bar. I don't want periodic updates, i dont' want animated ads to finish loading, i don't want my screen rearranged.... nothing. I WANT TO TERMINATE ALL CONTACT WITH THAT WEBSITE until such time that i might click on "reload". And i should be able to do this without having to yank out my ethernet cable.
This may be a more general problem that applies to Firefox as well.Huh, i didn't realize the escape key did something different than Cmd+period. It seems to work but i'll have to try it with some of the peskier websites.... Thanks.
-
Can't Stop Cover Page from Printing
Every time a user prints a report, they are getting a cover page as listed below. If there is a way, how can we stop this cover page from printing? Thanka ahead of time.
########## User: applmgr@prowvdb1
##### Title: JDoe.649719
##### Date: Mon 09:35 Aug 20, 2007
##### Job: Lazerjet5326_HP-12721
#####Hello,
This seems to be what is called a "Separator page" in Windows printer driver.
Separator pages are used at the beginning of each document to make it
easy to find a document among others at the printer
On Windows, it is a "Printer Driver" setting
Regards -
When I change my mind about loading a page I don't see anyway to stop it from building or to cancel the action. I tried to research "stop" at http://support.mozilla.com/en-US/kb/Menu%20Reference?s=%22url+bar%22&as=s#w_stop regarding the main window reference menu but nothing of what I read there seemed applicable. It appears "Stop" is supposed to be under "View", but I did not find it there. Please help! I want a simple click of the mouse action to prevent a page from loading!
You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar via View > Toolbars, also accessible via Firefox > Options.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
Firefox 4 has two bookmark buttons with a star in the Customize window.<br />
One star button has a drop marker that open a Bookmark menu.<br />
The other star button without the drop marker opens the bookmarks in the sidebar.<br />
<br />
You can drag the Bookmarks menu button with the drop marker in the Customize window from the toolbar palette on a toolbar (e.g. Navigation Toolbar or Tab Bar or to the left side of the Bookmarks Menu Items).<br />
You only see the Bookmarks menu button if the menu bar is hidden.<br />
If the bookmarks toolbar is visible then the default bookmarks menu button will appear on the right hand side of the Bookmarks Toolbar as part of the Bookmarks Toolbar Items.<br /> -
Trying to call MM_showHideLayers on container HTML page from Flash
I'm designing a site that is mostly in Flash, but I would
like to show some content by changing the visibility of a layer on
the HTML page that contains the swf file. I have tried
on (press)
{ExternalInterface.call("MM_showHideLayers",'testerbox','show');
and
on (press)
{ExternalInterface.call("MM_showHideLayers('testerbox','','show')");
and I have tried
on (press)
{getURL("javascript:MM_showHideLayers('testerbox','','show')");
My HTML page code is below. Can anyone tell me what I am
doing wrong and point me in the right direction? Can this be done?
Is there a better way to display large amounts of highly formatted,
dynamic content from within Flash without loading a new page or
resorting to a pop-up window? I really want it to look and feel
like it is all part of the same page, and I need more tags than I
can use in a Flash textbox. Thanks in advance :-)
Teri
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<script type="text/javascript"
src="swfobject.js"></script>
<script language="JavaScript" type="text/JavaScript">
<!--
function MM_showHideLayers() { //v6.0
var i,p,v,obj,args=MM_showHideLayers.arguments;
for (i=0; i<(args.length-2); i+=3) if
((obj=MM_findObj(args
))!=null) { v=args[i+2];
if (obj.style) { obj=obj.style;
v=(v=='show')?'visible':(v=='hide')?'hidden':v; }
obj.visibility=v; }
//-->
</script>
<style type="text/css">
<!--
#testerbox {
position:absolute;
width:200px;
height:115px;
z-index:6;
left: 69px;
top: 42px;
background-color: #FFFFFF;
visibility: hidden;
-->
</style>
</head>
<body bgcolor="#FFFFFF">
<table width="316" height="180" align="left"
cellpadding="0" cellspacing="0">
<tr>
<td
background="../images/innerpage/sidebar-bg-iframe.jpg">
<div id="testerbox">My test</div>
<div id="flashcontent" align="center">
<p>
You must have Flash Player to use this feature.<br>
<br>
<a href="
http://www.macromedia.com/go/getflashplayer"
target="_blank">Click
here</a> to download or upgrade your Flash Player
</p>
</div>
<script type="text/javascript">
// <![CDATA[
var so = new
SWFObject("leaders.swf","leaders","316","180","6");
so.write("flashcontent");
// ]]>
</script>
</td>
</tr>
</table>
</body>
</html>
Text
Text
Text
TextHi, did you get a solution to this problem, i am having a similar issue with the MM_showhidelayers not working in IE6, it works fine in IE8?
the code im using on a flash button is:
on (press) {
import flash.external.ExternalInterface;
ExternalInterface.call("MM_showHideLayers('menu','','show','menu_back','','show' )");
Thanks
Gary
Maybe you are looking for
-
Consuming Web Service | Authentication
Hello Friends, I'm having some trouble configuring a Web Service regarding authentication. I created a remote function in SE80 and a web service with it, then I went to SOAMANAGER and configured the authentication section with the 'no authentication'
-
A visitor to our house uploaded "newer base station software" from his MacBook, running OS 10.4.11, to our Snow airport base station. I think he uploaded v4.0.9 software, or is it firmware, into our base. (I think it was v2.0.4 before he did this.) S
-
I have itunes on the pc new version my partners old iphone is still recognised on it and need to delete that account off it dont know how secondly I plug my iphone 4 into the laptop and I cant see any pictures just my songs even after I have backed i
-
How do I get a windows refund?
Hello, I recently purchased a ThinkPad from lenovo.com. Unfortunatelly, the website did not offer a choice to buy it without an OS, forcing me to buy it with windows. As I don't use Windows, don't have Windows, I should not pay for it. Does anyone
-
Need download Windows 8.1 OS recovery iso file for zBook 14
I have a HP zBook 14 with Windows 8.1 OS pre-installed and it come with only Driver Recovery DVD, now it has problem with OS and i want to recover (Can not recover from HDD recovery partion any more). Kindly give me a link to download the OS recovery