Cant upgrade iphone
when i try to upgrade my iphone i-tunes says i m not connected to the internet ( but i m connected) but i can download apps does any1 know a fix ????
cheers stinger
First find and delete any and all .ipsw files on your computer. There should only be one, but delete all that you find. They are located here:
~/Library/iTunes/iPhone Software Updates
You will most likely have to turn on show all hidden files/folders to see it.
Then, make sure any and all firewalls, anti-virus, etc are turned off. Re-boot your computer, launch itunes, connect your phone & hit the check for update button.
Similar Messages
-
I Upgrade Iphone 3GS And After All Iphone Cant Active.. what Can I Do.. ,,Your Iphone Could Not Be Activated Because.......,
Activation issues are almost always the result of a device that has been hacked or jailbroken.
If this is the case, no support can be provided here. -
just upgraded iphone today to Ios6 and although siri has improved i STILL cant do location based reminders! any ideas?? i am in the uk using Vodafone
What do you mean you can't do them? What happens when you try?
-
Cant upgrade my iOS from 5.1.1 to 6.
im using iPhone 4s (Factory Unlock) but i Cant upgrade my iOS from 5.1.1 to 6. after 90% of download an error cameup and stop downloading. Tried several time to download, whats the problem ? what should i do ?
This message indicates that your phone was hacked or jailbroken to unlock it.
Then when you updated/restored your phone it locked back up to the original carrier.
Only the carrier that the phone is locked to can unlock it. -
An i4 MC603ZA cant upgrade iOS from 4.2.1 to 4.3.2 and show "This device isn't eligible for the requested build"
Back up your iphone. Erase all content and settings and try to update again. Also on you computer make sure your signed in as the administrator and All antivirus and firewalls are disabled. http://support.apple.com/kb/ts4451
-
I have Mac Tiger 10.4.11 i cant upgrade itunes
i have Mac Tiger 10.4.11 i cant upgrade itunes Please help me wat i have to do
To sync with an iPhone you need to be using an Intel Mac running Snow Leopard 10.6.8 or higher.
Start by checking if your Mac can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required. -
If i cant upgrade to Lion how can i effectively use i cloud?
If i cant upgrade to Lion how can i effectively use i cloud?
OK paper weight is harsh, but i made the upfront investment to have longevity ....
Reality:
- We can't predict what Apple will do, we can only go on past behavior.
- For the past decade Apple has stopped pretty much all support for anything except the current and previous operating system (OS) version. Apple has brought out a new OS version roughly every 2 years. This translates to roughly 4 years of update support. In some cases Apple may stretch it a bit such as iTunes also still working under OS 10.5 (we're now on 10.7), but iTunes isn't an OS. I do know with the recent malware incident Apple did not bring out a fix for any OS earlier than 10.6. Now there's an interesting change ahead. Apple brought out Lion last year and is likely to bring out Mountain lion this year. We're now on a 1 year upgrade cycle. If Apple continues past pattern on only supporting the last two OS versions it means your OS basically only has an effective lifespan of 2 years instead of 4. Longevity?
- Hardware. We bought an iphone last December. I asked the person in the store about battery life. He said, "Oh, at least two years but you'll be thinking about getting rid of this one by then and getting a newer one." Two years.
I don't remember the exact criteria, but Lion won't run on the earliest Intel Macs (2006) and Mountain Lion likely won't run on some of the middle aged ones. Snow Leopard (ca. 2009) won't run on any Mac made prior to 2006. Reviewing OS releases for the past 6 years or so it seems to me you get roughly 5 years before new OS releases won't run on your hardware any more.
So, we have software support dropping out after 4 years or so (maybe now down to 2 years???) and hardware becoming obsolete after 5 years. Is that longevity?
Here are some other interesting articles:
Vintage and obsolete products - http://support.apple.com/kb/HT1752 - Apple's official perspective.
http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs - hard drive upgrade issues. -
having the same problem, cant sync iphone 5 with my mac 10.5.8.. i have tried downloading the newest itunes but the problem is i cant install in with my current operating system. really need to figure out how to get snow leopard
You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11. The 10.6 Snow Leopard DVD is back in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
-
Cant upgrade 7.0.6. After restoring changing again into recovery modus.
Trying now since 2 hours to upgrade my **** iphone but cant. Connected with my laptop but cant upgrade or restore it it still stays in recovery mode.
Slone,
I finally decided to turn this annoyance into an opportunity. After a lot of experimenting I found that my iPad was just fine under 7.1 if I simply restored it as new. I have a lot of time on my hands and I had 1424 apps on my iPad! This is why every attempt to restore took so long.
I decided to restore as new, spend a day restoring the apps I really used. Doing so gave me a quick iPad with only bout a quarter of the storage used.
Granted it was a pain in the arse, but I wrote it off as in the old days when you had to do this with windows 95 just to keep a stable system.
I DO have some data in a few files of the now unused backup but a quick google search finds a couple Mac programs out there that will allow you go extract audio recordings, app data files etc. from the backup. I'll do that someday if I even miss the files I've probably forgotten that are there.
Anyway, there was nothing wrong with my hardware. I think there were just some troublesome setup items that 7.1 didn't like. Once set up as new, the ipad was fine.
Good luck! -
While upgrading iPhone OS from 5.1 to 5.1.1 on Win 7 using iTunes 10.6.1.7, the iPhone hung. I could not get iTunes to find it and Win 7 does not see it.
When I connect the iPhone to the USB, Win 7 issues the welcome sound, but that is it. The same happens when I disconnect iPhone.
The Devise Manager has the Apple Mobile Device USB Driver correct without any problem. I updated this driver called usbaapl64.
The iPhone is still hung.
I restarted the iPod service
I restarted the Apple Mobile Device Service
I tried to empty and delete the temp directory in C:\users\myname\AppData\Local\ but could not
The iTunes I am using is the latest version
I updated the Apple Mobile Device Driver as stated above correctly
The iPhone is still hung and is not recognized by Win 7 or iTunes, so I cannot restore the OS to the previous working version
What else can I do to restore the previous working OS on my iPhone 4I was connecting the iPhone 4 to a USB 3.0 port. I was told by Apple Express Support (at US$29.99) not to use USB 3.0 and to use USB 2.1 instead.
If you are connecting your iPhone to the computer using a USB 3.0 port, disconnect it immediately. iPhones will lock up if you try to update while using a connection through a USB 3.0 port.
Disconnect the iPhone from the computer
Go to Device Manager and find the connected USB port. Click the mouse right button and update the driver
Shut the iPhone by pressing the sleep button and the home button concurrently for some time
Move the USB cable to a USB 2.1 port or older without the iPhone.
Restart iTunes.
Connect the iPhone
Your computer should recognize the phone and reloads the correct USB 2.1 driver (Apple Mobile Device)
Then iTunes should recognize the iPhone and starts reloading the firmware.
When that is complete it may ask if you wish to restore, naturally you say YES
iTunes will restore the iOS
Using iTunes, restore the latest backup to get your data back.
When all of the above is completed. Start enjoying your iPhone.
If the above does not work. Throw your iPhone out of the window and get a replacement Android phone. -
want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please
If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards. -
After upgrade IPHONE 4 to IOS 7 , it work 2days, and now it is off, not recognized on the pc and no battery logo when connecting to the sector
I'm happy to say that I solved the problem, and for the community (for the "next generation" that will search a solution for this problem) - I will publish the solution for this problem : I defined as new iphone, and then the restore showed up!
All wishes everyone... -
Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?
Please disregard this question. I'll submit a shorter and more direct question. Thanks.
-
Steps to upgrading iphone 4 with iOS 5
Need steps to upgrading iphone 4 with iOS 5?
1. connect ur phone to ur mac/pc
2. open itunes ( make sure u have version 10.5 )
3. if it doesnt automatically ask u to update ur phone . click on summary and then click update
4. ensure that u backup ur data before updating.
5. click on download and install.
6. wait for a while and enjoy iOS5 -
Encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I encountered error 6 when upgrading Iphone 5s from 7.1.2 to 8.3
I've tried upgrade iphone on three computers , the results are all the same.
One of the computers successfully upgrade my ipad to 8.3.
There are 2GB left on IPhone 5S before I perform the upgrade.
It should be enough for iTunes to finish the process, right?
But in the log, it says "copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device"
why is that?
Any way for me to continue the upgrade? it seems it's almost done.
Thank you
the end of the log is as below:
[10:36:29.0714] Could not find libAppleSWDHIDFlashUpdater.dylib
[10:36:29.0714] entering fixup_var
[10:36:29.0714] entering update_var_directory_hierarchy
[10:36:29.0714] replace_data_partition_path: moving /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets
[10:36:29.0714] copier_file_error: /mnt2/mobile/Library/PreinstalledAssets/com_apple_MobileAsset_Font.cpio: No space left on device
[10:36:29.0714] copy /mnt1/private/var/mobile/Library/PreinstalledAssets to /mnt2/mobile/Library/PreinstalledAssets failed: 0x2
[10:36:29.0714] unable to copy directory: 2
[10:36:29.0714] failed to replace path mobile/Library/PreinstalledAssets: 2
[10:36:29.0714]
[10:36:29.0714] ==== end of device restore output ====
[10:36:30.0280] AMRAuthInstallDeletePersonalizedBundle
[10:36:30.0421] <Restore Device <<<<<IMEI>>>>>>0>: Restore failed (result = 6)
[10:36:30.0542] Restore completed, status:6
[10:36:30.0542] Failure Description:
[10:36:30.0542] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[10:36:30.0542] Depth:1 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - Failed to handle message type StatusMsg）
[10:36:30.0542] Depth:2 Error:無法完成作業。（AMRestoreErrorDomain 錯誤 6 - failed to fixup var）Hello there, Kenduck.
It sounds like you are trying to update your iPhone 5s to the most current version of iOS and are getting an Error 6 message. The following Knowledge Base article offers up some great information in regards to that very error message:
Get help with iOS update and restore errors - Apple Support
Particularly:
Check your security software
Errors: 2, 4, 6, 9, 1611, 9006.
Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
If you still see the error message, check for USB connection issues.
Thanks for reaching out to Apple Support Communities.
Kind Regards,
Pedro.
Maybe you are looking for
-
[SOLVED]Problem with systemd and awesome wm
Hello, I recently have installed systemd and I have enabled slim.service, but after logging in throught slim I cannot run any programs in my awesome wm. Well, actually I can, but only a few seconds after login. If I run xterm and then try to run a pr
-
Hello everyone.. I have a problem with my BBM. When I trying to delete a BBM contact, It can't be removed. It's happen only in 1 contact. When I try to delete another contact, it's successful.. I have tried to reboot my BB and it doesn't work.. What
-
Printing Barcode on sample lables using sapscripts.
Hi SCRIPT GURU's, The problem i am facing is 'I am able to view the Barcode in printpreview but when i try to print its not appearing on the PrintOut. The output device i am using is LOCAL with SWIN as device type. Thanks in Advance. Regards Sati
-
Here is my situation. My MacPro HD died. It is being shipping from Apple, but I am in a dire situation. I need my machine running tonight to complete a project. I do not mind buying an extra drive, there is always a good use for one around my place.
-
Inserting pictures in DataGrid
I am studying AS3 now. How can I to insert pictures in DataGrid?