Cant Z1s 3/4G work in Asia?
I travel to Asia, Taiwan, with my z1s phone.
I can make phone call, but no Internet!!!!
Local carrier provider told me the 4g band are 900/1800mhz.
I have checked the specification, and it is included the band.
Cellular and Wireless : UMTS HSPA+ 850 (Band V), 900 (Band VIII), 1700 (Band IV), 1900 (Band II), 2100 (Band I) MHz GSM GPRS/EDGE 850, 900, 1800, 1900 MHz LTE (Bands 4, 17)
What can I do now?
It is hard to travel with out google maps support!!!
(even 2/3 g internet can''t work too!!)
Do I need to JB my phone or set up something?
I'm almost sure you need to enable data roaming when abroad - Settings - Data usage then tap the 3 dots in the top right corner and enable Data roaming
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman
Similar Messages
-
I singed into CC on my home computer, now I cant sign in at work? How can I sign in at work? Isn't there an option to sign out of all other devices?
If the IT dept. at your former employer knows what they're doing, they have already had access to everything on your work computer. As to transferring your data to your home computer, read here:
https://discussions.apple.com/docs/DOC-3141 -
My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me
Likely Apple problem
iTunes Store - 20% of users are affected
Users are unable to make purchases.
http://www.apple.com/support/systemstatus/ -
I cant get itunes to work on my new Sony Vaio. Im running Windows 8.1.
i cant get itunes to work on my new Sony Vaio. Im running Windows 8.1. Anyone have a fix?
Hello philtapevans,
The following article provides information and steps that can help get iTunes installed on your computer.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Allen -
set up ipod touch to cox email, ive tried everything and cant get it to work. thanks!
Here's an answer from the net:
Go to Settings/Mail,contacts,calendars/Add account choose other, choose Add Mail Account. Fill in name, email address, password and description on the screen that comes up. Save those.
One the next screen tat comes up click om POP in the first line then fil in the host name as
spop.west.cox.net or spop.east.cox.net or the one to go with your region.
Note that is not a misprint, that is spop (secure pop)
Fill in your username one more time (the password should have carried over from previously)
Fill in your outgoing mail server like smtp.west.cox.net (change for your region) and click Save.
When all the settings are verified a checkmark will appear next to them all and you are good to go.
If it says something like "can't connect via SSL would you like to ..." then you probably missed the step about selecting POP on the second screen and are trying IMAP so go back and try over with POP. Or perhaps mistyped soemthing.
Once everything is working you can go back into the settings and see that it has automatically connected on port 995 and that SSL is on
Note that you probably won't be able to send email from a wifi in a cafe or similar as cox won't let you connect to their smtp from outside their network.
I haven't tried receiving mail from a non cox connected wifi yet but I suspect it will work just fine. Anyway these settings work for me using my ipod to my home wifi router connected to cox.
I could not find a definitive guide when I searched so I hope this helps other folks trying to configure this.
I got the spop from "Mail for Mac OS X 10.5 configure SSL / POP" here:
http://support.cox.com/sdccommon/asp...c-7f95e8bcaf39 -
Please sort out the V 11.1.4 problems as I cant get iTunes to work now. You need to have a new version asap
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
[SOLVED] cant get Xcompmgr to work how i want
hi
I have just followed the wiki on here to install and use Xcompmgr, I then went to the fluxbox wiki for Xcompmgr to see if i could get it to work properly. no luck!
Xcompmgr works fine, but i cant control how it works! when I run xcompmgr -c in terminal, it all kicks in fine, but everything goes to 50% transparency!! ideally, I want it to start with no transparency, then use transset to set individual apps transparency!
thanks
Last edited by ninjaprawn (2008-12-16 20:42:49)Hey,
If flux works similarly to openbox, if you put "xcompmgr &" into you autostart file (~/.fluxbox/startup I believe), this should start xcompmgr without affecting anything initially. Once your logged in, now with xcompmgr running, you can launch apps with transset.
I've only had a brief mess around with transset and only use transparency for terminal, so apologies if this doesn't work / isn't what you're looking for. -
I cant get ECWID to work on my mobile devices, it only seems to use the desktop site rather that the Tablet or iPhone? Can anyone help me?
Hi Jim,
We’ll be glad to help you.
Ecwid supports responsive layout, which means that the store pages can adapt to the visitor's screen width on the fly and keep the layout clean and nice. Your products and categories lists will be fit for any window's size, as Ecwid will calculate the most suitable number of products or categories in row automatically. In other words, Ecwid looks great on any mobile devices. You can check how your Ecwid store may look on smartphones and tablets, if you see your Starter Site (what it is).
However, if you want Ecwid reveals itself in all its glory, you should embed your Ecwid store into website, which also support responsive layout, because if the site doesn’t adapt to size screen, Ecwid is not able to determine how it should be changed since it’s just a part of the site.
We’ve checked your site and found that you used Adobe Muse for building your site. Using Adobe Muse, you can create alternate site layouts for web content to be displayed on desktop, smartphones, and tablets. Nonetheless, your site has a layout for desktops only, that’s why it looks the same on all devices. You can learn how to create those alternate layouts in Adobe Muse, by reading “Creating a Website for Mobile Devices” article.
I hope this helps! But if there are any questions, don’t hesitate to reach us out on Ecwid forums. -
Cant get Frontrow to work after installing 10.4.3 and updating it
I made a terrible mistake today and moved all my files from my harddisk to my external harddisk. I had to reinstall everything but I cant get frontrow to work properly. I cant find it on my external harddisk either.
Can someone please help me with this tricky question.Winbo:
Can you describe your problem in a bit more detail? Why did you decide to move your files? What files did you move? What method did you use to move them? Did you move them over completely by way of backing up and then erased your disk prior to moving them back?
Any other information you can provide will make it easier to make suggestions on your issue.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6 -
Cant get facetime to work on mini ipad
Cant get FaceTime to work on new mini IPad....any suggestions? It keeps verifying but it will not work, it allows me to get apps. Triple checked that the Apple ID and password is correct, checked the settings to make sure they are turned on, able to get imessage, not sure what the problem could be?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Cant get bluetooth to work on iphone 5 wont even discover divices
Cant get bluetooth to work on iphone 5 wont even discover divices
supported bluetooth profiles http://support.apple.com/kb/ht3647
what are you trying to connect your device to? -
cant get wifi to work on ipod
would help if you added more then that
as in what set up is on your router, what have you tried etc -
can anyone see what i'm trying to do here?:::
<cfquery name="display_log"
datasource="allied_control_db1">
SELECT *
FROM ops_log_entry
ORDER BY log_entry_date_time DESC
</cfquery>
<cfquery name="get_current_status"
datasource="allied_control_db1">
SELECT *
FROM new_log_entries
WHERE #display_log.ID# =
#get_current_status.id_original_entry#
</cfquery>
i want to pull the 'current status' of an entry from another
table where the ID of 'ops_log_entry' matches that of
'new_log_entries'
everything work except this line:
WHERE #display_log.ID# =
#get_current_status.id_original_entry#
i dont think i'm far off but just cant get it to work.
anyone?Hi Phil,
i'm always carefull not to use reserved words as i spent
nearly 24 hrs pulling my hair out before trying to figure out why a
query wasnt working, so i'm pretty sure its not that.
i havent added anything to the query apart from the date/time
column name.
<cfquery name="display_log"
datasource="allied_control_db1">
SELECT *
FROM ops_log_entry AS L INNER JOIN new_log_entries AS N
ON ( L.ID = N.id_original_entry )
WHERE N.log_entry_date_time = (SELECT
MAX(N1.log_entry_date_time)
FROM new_log_entries AS N1
WHERE N1.id_original_entry = N.id_original_entry)
</cfquery>
ive checked the DB column types and the ops_log_entry.ID is
of course an AutoNumber (long integr) & the
new_log_entries.id_original_entry is a Number (long integr)
so seen as they are both the same types, should there be any
need for single quotes? -
[solved]passenger + nginx + rvm cant get nginx to work
Hello ,
I am trying to install passenger-install-nginx-module from the wiki of ruby on rails. I removed my existing nginx but
but now I cant get nginx to work from the /opt/nginx location. I am getting
ruby-2.0.0-p481 [ytsejam@ytsejam ~]$ nginx -v
bash: nginx: command not found
If I try with "pacman Ql nginx "
ruby-2.0.0-p481 [ytsejam@ytsejam ~]$ pacman -Ql nginx
error: package 'nginx' was not found
but I can enter the directory of /opt/nginx by using cd command.
can anyone help me ?
Last edited by ytsejam (2014-08-26 08:25:52)I'm happy to see that nginx-passenger had what you were looking for. If you encounter any problems, please don't hesitate to leave an AUR comment or submit a pull request!
-
I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?
I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?
Maybe you are looking for
-
Problems with applet for displaying desktop app's output
I inherited a desktop C++ (VC6) application that uses the user's web browser for output. When the system first wants to display output it writes a temporary html file, fires up the web browser with an html page with an applet that opens a socket that
-
Indexing multiple documents in one BLOB?
Hello, I need to index a bundle of documents (PDF, DOC, PPT...) as a unit with one index and probably a key identifying the bundle. So that not every document must match the searchstring to be found by the user, but the whole bundle is searched for c
-
Plz provide the soln for this java script error
am trying to access hotmail site but am getting the msg that JavaScript required to sign in how can this be done
-
Font Wierdness---I delet 'em, yet, they re-appear---?
Well, actually a couple of font issues: Background: A good while back, probably in ver. 10.3.9 or so, (I'm now 10.4.8) Disc Warrior reported some issues w/some of the non English Fonts, so, went thru & deleted those. As well as 'Resolve Duplicates' t
-
Broadband speed slowed to a crawl at best
Please can somebody help me? My usually great download speeds have for the last week dropped to an agonising slow speed and often pages just don't load at all (even historically reliable ones such as BBC News for example). I've tried the BT online he