Capacity requirement showing up in previous month in RCCP

Hi Experts,
                 I am doing RCCP through MC88. But when i am giving the sales quantity in January and generating a synchronous production quantity, the capacity requirement and load are shown in the month of December instead of in January.
                 How can i get the requirement and load in January, please suggest.
Regards
Sm.

Hi Jiaul,
            I cannot find a provision to change the profile dynamically from MC88 screen. This is possible in my understanding in capacity levelling/planning screens like CM38/CM01, etc.
            But even in such screens the same problem remains. For example when i did LTP for this material with PIRs in Feb 2011, the capacity requirements in CM38 appeared from current period that is from 09.12.10, though my planning scenario was valid from 01.01.2011. I changed the period and evaluation period dynamically from  the CM 38 screen, but that did not solve the problem as the requirement and load which was wronly showing up in Jan instead of Feb 2011 ( just as it happened in RCCP) merely vanished from the output and now i have the available capacity in Feb 2011 showing up but without any capacity requirement or load in the month.
Regards
Sm.
Edited by: Sm on Dec 9, 2010 1:02 PM

Similar Messages

  • Need to show Previous months data in report

    Hi All,
    I have a crystal report 2011 which shows monthly Cash data. It has 3 other columns like Previous 3 months cash data, previous 6 months cash data, Previous 12 months cash data in report.
    My report also has two parameters- start date and end date. If I give Start date as 1/1/2012 and end date as 12/31/2013 (two years date range) then correct data comes in all columns and for 2013 year, correct data is coming for Previous 12 months column. But if I give only one month date range like start date as 1/1/2013 and end date as 01/31/2013, then it is not showing correct data for these 3 columns - Previous 3 months cash data, previous 6 months cash data, Previous 12 months cash data. Ideally as per requirement, it should calculate previous months data regardless of parameter values and put data in respective columns.
    Any help/suggestion? Any trick which can help me to show correct data in all columns no matter what date range or months I am taking in parameters.
    Is it mandatory to have previous 12 Months data in report to calculate column-Previous 12 months Cash data?
    Thanks,
    Remi

    Hi Remi,
    You can try like this:
    I have given a some suggestions i.e You just take one parameter only because u can imagine 3 columns previous data display correctly i.e From Date
    Month parameter is also a alternate option.
    For Ex: Column1: From Date - 90 Days/3 Months  - we get the three months previous data correctly etc.
    Finally, create a stored procedure that returns the required columns and does all the calculations on the database side.
    Follow abhilash suggestion as well.
    Useful threads: Crystal Report Parameter Issue
    Pull Last 6 months of data
    Month to date data for Previous month
    How to find current month, previous month Net Sales by means of formula?
    Thanks,
    DJ

  • Display previous month value in report

    Hi,
    I have a requirement to display the previous month amounts on monthly basis. here is the example.
    In the Cube I have data like this:
    <b>Customer   Month         Amount</b>
    C1        Jan 2004        $500
    C1        Feb 2004        $600
    C1        March 2004      $1000
    I want to display in Report with another key figure to show the difference between current month and previous month. Report should look like:
    <b>Customer   Month  Amount  <i>Prev_Month_Amount     <u>Diff</u>.</i></b>
    C1      Jan 2004   $500         0               $500
    C1      Feb 2004   $600       $500              $100
    C1      Mar 2004   $1000      $600              $400
    I have tried using restricted key figures.but it is showing the same amount in prev. moth amount colunm till feb 2004. anyone had similar req. please advise me.
    Thanks in advance,
    Ram

    Hi,
    I can only think about a 2 structure approach with cell calculations.
    This will result in a static report with 12 rows for each customer. Then you would need to use the new feature of zero supression, to hide those month where no data exists.
    Heike

  • To retrive previous month based on month prompt

    Hi,
    My universe is based on SAP BEX query. I have a requirement to report the previous month data based on a month prompt. Since the universe is based on the MDX, could anyone suggest a way to calculate previous month from universe.
    Appreciate your responses.
    Regards,
    VyshBO

    pvinesh wrote:
    Hi VyshBO,
    >
    > You can refer below syntax and prepare a filter object in universe to get Previous Month.
    >
    >
    <FILTER KEY="[ZMONTH].[LEVEL01].[[ZMONTH]].[Value]"><CONDITION OPERATORCONDITION="Equal"><CONSTANT CAPTION="-1"/></CONDITION></FILTER>
    >
    >
    > Regards,
    > Vinesh
    Can  you explain that syntax, Vinesh? In particular, what does the [[ZMONTH]] imply?

  • How to show a report for 'Previous Month' Data

    Hi Gurus,
    I have a requirement, where i have to default my report to show previous month data.
    Scenario:
    My prompts by Default are set to CURRENT (current year,quarter,month). once the user logs in, the report should display data for month 'Nov' instead of 'Dec'.
    I tried using TIMESTAMPADD() in the formula , but it didn't work, though i don't see any error. Not sure if i 'm missing something.
    Is there a way to achieve this.I 'm using OBIEE 11.1.1.6.
    Any help is highly Appreciated ! Please.
    Thanks,
    Ramya

    From what you wrote I am assuming the user can manually save the report results to the Excel file.
    If your report uses ALV Grid it is possible to export the data to a spreadsheet (one of the functions available in the ALV tool bar).
    If you have used WRITE statements it is also possible to save the output as a spreadsheet (menu System -> List -> Save), but the latter will not produce as nice a spreadsheet if the data don't form a matrix. In other words, some work may be necessary in the spreadsheet afterwards before it has the format your user wants.

  • Show data of last day of previous month against any day of current month

    Hi,
    I have fact table which contains data at date level (we have data for oct-2009 to april-2010). Our requirement is to show data of last day of previous month against any day of current month in obiee 11g. I am facing problem in Feb 2010 its picking data of 28-Jan-2010 instead of 31-jan-2010 and for April its picking data of 30-mar-2010 instead of 31-mar -2010.
    Any suggestion ???

    You're asking to filter your data set to only include rows between:
    1) last day of the previous month
    2) any day of the current month
    This can be achieved with prompting in OBIEE Answers.
    last day of previous month = TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE)) . The problem is you need to make query work within Oracle's Answer syntax.
    In the prompt, select the operator type for your date dimension as 'between' and default to 'SQL Results'.
    For the 'last day of previous month' , use the query:
    SELECT
    case when 1=0 then Time."Fiscal Date" else TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))
    end
    FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
    For the current date, use the query:
    SELECT
    case when 1=0 then Time."Fiscal Date" else CURRENT_DATE
    end
    FROM ENTER_YOUR_PRESENTATION_FACT_FOLDER_HERE
    Another option is to create a last_date_pervious_month variable in the RPD and have that as the default value in your prompt.

  • How to show Increase/Decrease of Sales Amount compare to Previous Month.

    Hi,
    My users need to view the percentage decrease/increase of Sales $ compared to previous month, for each Month.
    How can I create a Restricted Key Figures that show Sales $ Amount as of Previous Month (take note it is not just Previous Month from Current Month, but each Month's Previous Month). i.e
    Nov 06  - Sales $ = 1000
    N0v 06 - CKF_A - Variance Compare to Prev. Month: 100%
    Dec 06 - Sales $ = 800
    Dec 06 - CKF_A - Variance Compare to Prev. Month: -20%
    (800-1000/1000)
    Jan 06 - Sales $ = 1000
    Jan 06 - CKF_A - Variance Compare to Prev. Month: 25%
    (1000-800/800)
    How can I create CKF_A and achieve similar result?
    Most of the variables for 0CALMONTH or 0FISCPER seems pointing to one value only.
    I don't want to create Restricted Key Figures for each and every month.
    Please help.
    Thanks,
    Sean Yit.

    Sean,
    You don't have to create RKFs for each and evry month. But you need to create just two RKFs.
    Lets say that you want to display the months in rows and Sales in the first column and the variance in the second column. Just restrict Sales by the month characterstic with a user entry variable (range if it is more than one month the user wants to display), then in the next column create another RKF by restricting Sales with the same month characterstic. This time offset the first varaible by minus one (-1). In the properties of this RKF, select always hide option.
    Now create a CKF (calculated key figure), by using the variance% formula option.
    CKF = RKF2 "%" RKF1.
    I hope this helps..

  • Is there a way to show the end dates of the previous month stand out?

    is there a way to show the end dates of the previous month in bold or make it stand out? so 30,31 and 1st of this month don't all look the same? For example the 30,31st get a regular text since they are a part of the the last month and this month gets bold dates? Its hard to read the dates anyways.

    Pics and more
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    5:05 PM Sunday; January 4, 2009

  • Previous months requirement.

    Any report or T-code for check previous months requirement.So please help me.

    There is no standard t code for your requirement. go for ABAP development

  • CM02 Transaction is showing Capacity requirements in Hours

    HI Guys,
    I have a question in regards to CM02 transaction, Plz help me finding out what is wrong with it  let me walk you through the step which I take
    CM02 > Workcenter name> Plant
    Click on Planning (Upper Left Corner) => Profiles > Option Profile and select SAPB023 which is Weeks (78)
    Click on Standard  Overview Tab (upper left Corner)
    Select any one the week and hit Cap. details/Period
    My problem begins here
    IN Rem.proc column(Remaining capacity rqmts.for operation segment "Processing) it is showing as Minutes, however in Reqmnts (Capacity requirements) it is showing the same value as in Hour Unit with the same number for instance if the number is 30 min and Reqmnts column it shows as in hour.
    Why it is showing Unit of Measure in Hours rather then Minutes and secondly, where this value is coming from.
    Thanks In Advance.

    CM02 > Workcenter name> Plant
    Click on Planning (Upper Left Corner) => Profiles > Option Profile and select SAPB023 which is Weeks (78)
    Click on Standard Overview Tab (upper left Corner)
    Now before you do the below step ,Go to Setting > General > Here you will geta Screen POP up for Settings: VAlue display
    And here there is check box for the unit of measure for capacity
    activate the check box.- and then follow the below stept. F1 details of this check box is self explanatory
    and now you do the below step
    Select any one the week and hit Cap. details/Period
    Kinldy let me know the feedback'
    reg
    dsk

  • J2iu Not Showing Previous month Balances For PLA (High Priority)

    Dear Gurus
    We are using Transaction J2iu for Fortnight Utlization. Now When we are
    trying to utlize PLA for the second Fortnight Of month March 07, The
    System is only showing the Current Month Balances ie The Balances for the
    month Of March 07 , And not accounting the balances for the previous months.
    Kindly Suggest .

    Carry Forward the GL Balances to Next Year i.e in Apr.07 &
    then Try it out again.
    Sometimes, System takes into account reatime balances & not balances as on particular posting date.
    Regards..
    Ameya...

  • Need To Create Box That Shows Previous Month Label And Amount Of Sales

    I am using CR2008
    I am creating a report for our salesmen and one of the fields in the report will be a text box that shows what the last month was. For instance, if the report is run this month, the report will plug July 2011 into the box because that was what last month was. Tied to this will be a salesman's total sales for last month that should show up in a box. I will place this box right next to the salesman's name on the report as the names will be static.
    I have several of these to do and if I can see the method I can re-create it for the others.
    How would I do this?

    Hi
    You can create a formula to get last month and this formula can be placed in a text box.
    dateadd('m',-1,currentdate)
    or
    Month(currentdate)-1&" ,"&Year(currentdate)
    This formula can be placed for all your salesmans
    Thanks,
    Sastry

  • Any fiscalyear select varible screen current month-previous month less all

    Hi,
    1 My requirement is end user will enter fiscal year e.g 2009-2010  (all fiscal year periods come  ) and in report my requiremnt is to
    show data
    2.  april to march
    3.  current month  minus  previous month  billing qty
    e.g    april  may june july  august ............................
    may - april billibg qty = variation
    june -may = var
    july - june ....= var
    thanks
    sai.
    Edited by: solv_ti on Jun 30, 2010 11:59 AM

    You can user customer exit to restrict the report for required month from the input year.
    Find the currect and previous month . Then you can also restrict the bill qty with the difference between current and pervious month.
    Hope this helps.

  • Compare turnover actual month with previous month on monthly based report

    Hello Gurus,
    please help me with the following requirment:
    In have a monthly based report with key figure 'turnover'. Now I want to calculate deviation turnover actual month vs turnover previous month from last year. How to handle this?
    Example:
                             CalYear/Month     
                             01.2010   02.2010   03.2010   04.2010
    Turnover              10            20            15            20
    Calculated          xxxx         xxxx       xxxx         xxx
    Thank you very much!
    Muammer

    Hello voodi,
    it doesn't work. With offset function it shows the turnover only in the columns from last year. I need the turnover from last year in the columns from this year. Any ideas?
    Expected:
                                   CalYear/Month
                                         01.2010   02.2010   03.2010   04.2010
    Turnover                          10            20            15             20
    Turnover last year        xxxxx      xxxxx      xxxxxx    xxxxx
    With offset -12
                                CalYear/Month
                                          01.2009         02.2010     ...               01.2010   02.2010   03.2010   04.2010
    Turnover                           20               50           ....                    10            20            15             20
    Turnover last year            20               50           ...                  blank         blank       blank         blank
    Thank you!
    Muammer

  • Capacity requirement for long term planning and make to order planning

    hello,
    anybody please guide me.
    my client using make to order scenarion and we are doing regulaly MRP run is MD50 with refernce to sales order.
    sales orders planning will follow for 2 to 3 months.
    at the same time my client wants to do long term planning also. to analize the capacity.
    for that he is creatind planning scenario and multi level planning with MS02 also.
    But the problem is when they are checking capacity requirement in cm38 it is showing only planning scenario load only. my client wants existing load and longterm planning load also. so they can plan the planning is sutibale in existing plan.
    so how can i get both plan in CM 38or is there any other T.code to get that data.
    please suggest me
    Thanks & Regards
    Bhakta

    Hi Pierre and Rajesh,
    When we create the simulation version, you have the possibility to choose the short-term planning. My point of view is, you can use the LTP fonction to do your scheduling for ex the next 3 months.
    I think it's what Pierre did. Am I right ?
    between to scheduling scenario to deliver my customer. With the simulation mode I can do my scheduling + use the MRP simulation to check if the raw material are available or not. Then use the MD04 to do the comparaison (or MS04 to compare between 2 scenario).
    But I found 2 problems :
    First : I don't find the parameters to show in the graphic MFS0, the planed fix order (I can only see the process order)
    Second : When my scheduling is finished, I want to update my operational planning with the simulation version. But I don't want to do article by article : when you have 400 references (raw mat, packaging, finish goods)  it's impossible (same issue like Pierre)
    Have you found a solution for this 2 points ?

Maybe you are looking for

  • MacBook Pro Will Not Turn On. Charger light flashing

    Hi there all. I am having a problem with my late 2011 MacBook Pro, and I have tried everything. I was wondering if you might be able to help. I will describe the problem in detail: This morning when I woke up and went to use my macbook, it said the b

  • Can anyone explain LV debug log files?

    Specifically, I'm looking at the debug files generated in my local %TEMP% directory, and I'm wondering what to make of the entries like this: starting LabVIEW Execution System 2 Thread 0 , capacity: 48 at [3510752623.52037530, (10:03:43.520375252 201

  • Again on "call to this must be first statement in constructor"

    Hi, I've spent the last hour reading tons of docs & threads about the "call to this must be first statement in constructor" problem, but I still cannot work it out. Here is the code      public Orologio(String s)           StringTokenizer exploder=ne

  • DVI display port/ADC display port bottleneck!

    My G5 dual came with ONE DVI display port and ONE ADC display port. I wish to add another monitor for editing purposes. My current monitor is an NEC multi-sync, which uses up the DVI port...leaving the ADC port empty and useless. 1. Am I forced to pu

  • What product is good for screen protection without sticky stuff?

    We just bought an iPhone 4S and want to keep the screen free of scratches and smudges.  The HD film they sell in the store says it has an adhesive.  Won't this mess up the screen?  Any other suggestions??  Thanks!