Captivate 4-Unable to Edit or Save a Project

Hi,
I am creating a CBT using Captivate 4. There are two slides so far and the size of the project is 1,901 kb. One slide in the project has six click boxes with multiple actions and has five animations included in it which are hidden until the user clicks a click box. The concept works wonderfully, however, I am now unable to edit or save the project. I cannot finish it at this point. Captivate will not allow me to add any additional buttons, click boxes, highlight boxes, new slides and so on. It also will not allow me to delete any unused items from the library, or save the edits I made up to that point.
I have tried the following, closing the project, closing Captivate and restarting my computer. I have also imported the slides into a new project with the same outcome. I have copied and pasted the slides into a new project with the same outcome. I have also tried to do a save as and it will not allow that either. There are no error messages. The project is not save on the network, it is on my C:Drive. I have had to restart the project several times and has this happened with each project. Any ideas would be greatly appreciated.
Thanks
Wendy

click on the folder containing all these documents and do the following:
Right click on the folder, then select "Get Info"
Click the lock at the bottom to give yourself access to the permissions settings for this folder.  A dialog will appear so you can enter your login name and password:
Now select your user name at the bottom (mine is wayne), set the read write permissions to "Read & Write" using the pop-up menu, then click the sprocket at the very bottom of the window and select "Apply to enclosed items..." from the pop-up menu.  The click the lock again.
Now try to open your Numbers documents

Similar Messages

  • Unable to edit WBS element once Project is released

    Hi,
    I am unable to edit the WBS element once Project has been released. Is this SAP standard behaviour? Is yes, is there a way we can make this editable and is it advisable?
    Please advice.
    Regards,
    Sophia Xavier

    Hi,
    The point is I am able to edit the WBS element before I have released the Project. But, once I have released the project the WBS element is blocked for changes.
    Infact the WBS element is editable until the higher level WBS element is released. But finally when I release the Project and system status changes to REL, the WBS element is blocked for changes i.e., it is not editable.I am just trying to understand if this is standard behaviour of SAP that WBS element becomes ineditable only overall Project is released. If the WBS element has to be changed after release, is there a way out?
    Regards,
    Sophia Xavier

  • I am unable to edit an image in Photoshop.

    I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.

    Chris:
    I have to apologize for being misleading on my request for help in
    resolving the problem.
    Actually the version I am using is CS2 not CS3.
    Yesterday I tried numerous times, and ways, to edit an image and each time
    it refused to allow me to save it.
    The software program just shut down. This evening when I decided to give it
    another try it worked perfect.
    Guess the program just took the day off.
    Thank you for offering to help
    Regards,
    Doug

  • User unable to edit contacts

    I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
    Do you want to save a copy of this item in the default folder for the item?
    I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
    No other users report the problem, and loading the users account on another computer demonstrates the same problem.
    Any ideas what I am missing?

    Hi,
    The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
    If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
    Add-MailboxPermission -Identity "xxx" -Owner "xxx"
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Unable to Edit Price Lists in Advanced Pricing Vision Instance

    Hello I have a new Vision Instance for 12.1.3 and when I switch responsibility to Oracle Pricing Manager Vision Operations I am unable to edit and of the price lists or modifiers that are in the system by default. any suggestions on what I need to update as I have not run into this before in previous Vision instances

    this was the solution to this issue
    Solution
    1. Be sure to set the following profile option values at user level
    a. QP: Pricing Transaction Entity = ORDFUL and save.
    b. QP: Source System Code to 'Oracle Pricing' (if not already) and save.
    2. Responsibility: Order Management Super User (or equivalent)
    3. Navigation: Pricing > Price Lists > Price List Setup
    4. Open the price list: XYZ CHARGES
    5. The form will now open without error, and changes will be accepted

  • Unable to edit Hosts file in Win7 Home Prem 64bit.

    Clean install.  Administrator account.  Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc   but there is no etc folder in the drivers folder.
     Turned off DNS Server. gpedit.msc not found when calling it in "run".  This is the first time I've used 64bit anything, so a bit of a newb in that respect. 
    Any ideas?

    Hi,
    As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
    In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
    worked.<o:p></o:p>
    For those users who experience this problem, here are the instructions to fix it.
    First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
    and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
    So, here you go with a correct solution for this problem.
    Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
    Hence, do not attempt if you are not 100% sure you can make it.
    Login to an administrator account.
    In the run command (Windows key + R) type, “control folders” and hit enter.
    Click on the tab called view.
    Select the radio button for Show hidden files, folders and drivers –ON.
    Uncheck the ‘Hide extension for known file types-ON
    Click on Apply and then OK.
    Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
    From the “drivers” folder, double click the folder named “etc.”
    Now you can see the “host” file along with others.
    Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
    “Run as Administrator.” If UAC prompted, click YES/OK)
    Now, you will have a notepad open with administrative privileges.
    At the top left side of the notepad click on “file” and then select “Open.”
    A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
    installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
    select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
    Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
    Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
    Make whatever changes you as you wish. (Example: If you need to block a web site called
    www.block123.com you can type 127.0.0.1
    www.block123.com right under the local hosts.
    Make sure you do not change any other letters or characters which are already saved in host file.
    This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
    http://support.microsoft.com/kb/972034 . If you
    have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
    Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
    instructions provided above and select etc folder and then save it.
    Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
    I have provided)
    There you can see 2 host files. One which has already been there and the other one you just saved.
    Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
    file type as ‘Text Document.’
    Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
    file as “hostold” and hit enter.
    Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
    “Text Document” to “File” and hit enter.
    Now, you have successfully saved the host file with your preferences.
    You can now delete the file which we renamed as “hostold.”
    We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
    few minutes on this.
    Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
    Should you have any questions, please feel free to ask.

  • SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

    Hi all,
    Environment:
    SharePoint 2013 (15.0.4420.1017)  RTM
    Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
    Issue details:
    When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As.  The
    same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu. 
    Opening the file through windows explorer also opens only in read-only mode.
    To date we’ve tested the following
    Windows 7 – Office 2010 = working as expected
    Windows 8 – Office 2010 = working as expected
    Windows 7 – Office 2013 = opening as read only, no prompt to edit
    Windows 8 – Office 2013 – opening as read only, no prompt to edit
    Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
    We have tested this in multiple SP2013 environments with the same outcomes.
    The workaround therefore is to save locally and then upload again which is not ideal.
    Unable to find an exact issue match to this.
    Any help with this appreciated.

    Hi Dan,
    For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode. 
    The same issue was present for Visio files.
    Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
    Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case.  If checkout is not required the document
    menu can also be used as expected.
    Cheers,
    Dan

  • Still unable to edit a word document after conversion from pdf?

    I converted a pdf file to a word document but am still unable to edit the word document and save as a newly created word document.  please help, thanks.

    Hi Disc9,
    In order to help you. Let me know which application of Adobe you are using including the version.
    Also let me know the complete workflow how you convert the PDF to docx/doc.
    Regards.

  • Unable to edit Visio 2013 drawing in Powerpoint 2013

    Hello,
    I'm unable to edit drawings created in Visio 2013 that I've embedded in Powerpoint 2013 - they copy over as pictures and I can only edit them as such.
    Interestingly, I CAN edit Visio 2013 drawings that I have embedded in Powerpoint 2002/XP.
    I'm embedding by simply copying the drawing and then pasting on the slide.
    Thanks,
    Tyson

    Open PowerPoint 2013, go to Insert tab > Object > Create a new "Microsoft Visio Drawing", I can edit the drawing what I wanna edit.
    open Visio 2013, create a new Drawing File and save as .VSDX file format, and then drag and move this file into a new creaing PPT, I can still edit it as expected.
    A bit more background information and your exact steps how you got to this point would be helpfu
    Tony Chen
    TechNet Community Support

  • Unable to edit any old entity in Data Modeler

    Hi,
    I have a strange problem with Data Modeler 2.0.0.584 on Win XP. If you came across similar issue, please let me know how you solved it.
    I have a logical model created several weeks ago. I can open the model without any errors, but I am unable to edit any object - when I double click on entity or relationship, the text in the property window is grayed out and I cannot change anything. I cannot change entity properties, nor add/change attributes.
    The strange thing is that I can create a new entity or relationship, but once the object is created I cannot edit it.
    I have checked that all files in the model folder are set as read/write but it did not solve the problem. At this moment I have no idea what else to check.
    Thanks for any suggestion or help.
    Regards,
    Jakub

    Thanks, that works!
    - save as into another directory
    - close Data Modeler
    - start Data Modeler
    - open the model from the new location
    - and voila! I can edit all the entities!
    Jakub

  • Export pdf    how to edit and save converted files

    I finally was able to convert to docx format, but see no way to use the converted file.  How can I edit and save in jpeg format?

    Hi Chuck,
    Please tell me what the problem is with the converted file. Are you unable to edit it, or did it not convert as you expected?
    Can you tell me how the PDF was created? (Different applications write PDF files differently, and some aren't as good as others--that can affect conversion).
    Best,
    Sara

  • Unable to Edit Tags

    For the last few hours I have been unable to edit Wiki article tags. When I click "Edit tags", modify the tags, and click "Save", I get the message "An error occurred while saving or formatting tags." I have tried in IE
    11, IE 9, and Firefox. Anyone else noticed this? I can edit articles, but I try to avoid that if I only need to edit tags.
    Edit: OK, now that I have reported the problem, I seem to be able to edit tags most of the time, but not always. I cannot see any difference between cases where I succeed and where I get the error.
    Richard Mueller - MVP Directory Services

    The problem seems to be with just two Wiki articles (the two I was working on at the time). I have been able to edit tags on other articles with no problem. The articles are:
    http://social.technet.microsoft.com/wiki/contents/articles/6233.introduzione-a-windows-intune-v2-it-it.aspx
    where I was attempting to add the tag "Has Image", to match the duplicate article I marked for deletion. And
    http://social.technet.microsoft.com/wiki/contents/articles/5816.aspx
    where I attempted to add "Windows Server 2008" and change "Has Images" to "Has Image".
    I will wait awhile for anyone else to investigate, but then I will attempt to edit the articles (instead of edit tags), change this thread to a discussion (since there will be no answer), and consider the situation closed.
    Richard Mueller - MVP Directory Services

  • Unable to edit keyboard shortcuts

    Hi all.
    Using my iMac at home and wanted to duplicate a shortcut I have at work. I use Microsoft Natural keyboards both places and I tied the Print Screen button to the screenshot command that saves the image to a file on the desktop at work. Well, now at home and I can't edit any of the keyboard shortcuts. I double click on them and nothing happens. I can create new application specific ones, but editing any existing ones is just working.
    Anyone have any ideas as to why I would be unable to edit any of my shortcuts?
    iMac - 27-inch, Mid 2011
    OS X Yosemite 10.10.2

    > How can the (CS6) ESTK user add a new macro and assign a keyboard shortcut to it?
    You can't, unfortunately.
    Peter

  • Unable to edit header regions of template

    I have just recently taken over the whole editing etc, publishiing , admin of some  websties.  i have purchased contribute CS5. I was previously using Contrbute 4, which allowed me to edit the whole of the pages'header, body etc..'  however, whereas the consultant adminsitrator allowed me to edit the header regions, I now do not seem to be able to do this in CS5.  Is it because the  administrator has done something to stop me or am I missing some vital bit of info.  I can edit the content.  The old administrator is acting as if I never could do this and says I need to use Dreamweaver, which I dont have and didnt need it before, I have open the index page in dreamweaver and I still find that I am unable to edit the header and it appears to be try to access an included file,  it is trying to access Templates/base.dwt trouble is this does not exist among the files, any idea's why this might be so or is there some trick to editing the headers now that I am missing, cheers in addvance
    dustin

    Hi Dustin,
         You can edit the existing template in the Dreamweaver as for you requirement, by creating connection to that site in Dreamweaver.
    While saving the template, Dreamweaver will prompt you, asking for updating the pages using this template. You can update all the pages using that template. So then changes you did in the template will be reflected in those pages.
    For example, if you place the Header part in Editable region and save the changes and update in all the pages, then when you edit those pages, the header part will be editable.
    Hope this helps you.

  • Curve 8900 - Unable to edit address book

    Tried but unable to edit address book for some days now and the phone just hangs. after turning it off and on, i get the following message: "Uncaught exception, Application net_rim_bb_ address book app (471) is not responding, process terminated"
    Any solution, please?

    Hi
    Ive updated the instructions
    This what I did to completely wipe my BB. I wrote this before starting and printed it off.
    If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
    I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
    Get the latest Desk Top Software (DTS)
    http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
    and install it on the computer.
    Get the correct latest version of the OS
    http://us.blackberry.com/support/downloads/download_sites.jsp
    and save it to computer.
    To erase all the data on your BlackBerry device, complete the following steps.
    1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
    2) Install JL_Cmder to computer.
    3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
    4) Make sure the DTS is closed and plug in the BB to computer via USB
    5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
    6) On the first screen, Press any key to continue.
    7) Now, if your device uses a password, enter it now. If not, press "N"
    8) Press 4 to initiate the WIPE
    9) Press "Y" to continue
    10) Now type "blackberry" to continue
    11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
    Launch the new Desk Top Software on the computer
    1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
    2). Click View Other Versions. Click the version of the new OS you previously downloaded.
    3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
    Do not disconnect the device until the whole process is completed and the device has rebooted.
    After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
    Leave it again for 10 minutes. You should now have a fully functioning BB!
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

Maybe you are looking for

  • Service procurement for the free texts ( Multiple line items in PO)

    In the service procurement for the free texts ( Multiple line items in PO)referring to the same  Contract we are cretaing the POs thro ME59 ( Program RM06BB20)  an unusual error message appears as under: "_Material/Service group STGOP2 does not exist

  • Payment Method split between two types (cash & credit)

    I am looking for a way of splitting a customers payment between two methods in one sales order. For example, a customer purchases an item valued at $100.  He wants to pay with $50 cash and put $50 on a credit card.  Currently the payment method resid

  • Setting playback speed for podcasts

    Whenever I watch a podcast it starts at the 1 1/2 speed and I must change it back to the 1X speed.  It only started doing this.  How can I set it to run at the 1 1/2 speed on startup?

  • Shared Pool Fragmentation View (x$..., k$, ....)

    Hi, does anybody know, if there is a view where i can see at which position in the shared pool there is free space and where are objects? Reason. I would like to build a fragmentation map (like the EM Tablespace Map) Thanks Marco

  • Running programs WINDOWS using java

    Hi , I would appreciate if anyone could tell me how to run programs WINDOWS using JAVA language .Thank you.