Captivate 7 event video playback controls not working
Hi,
I'm using Captivate 7 and published an mp4 event video with limited playback controls (only play, pause, back, and close) on the slide, since the event video controls won't show up once published. When I publish the HTML5 video (with or without seamless tabbing) the controls are not working. When I click play the video plays and I can pause it, but when I want to continue play, the controls are not working.
I tried only to use the skins (clear, corona, and halo) given with the event video, but then I can't pause the video at all, since the controls are not showing.
We need the video to play in HTML5 mode for iPads and computers, but we're at a loss with the controls. The video has got to be limited to only play, pause, back, and close - no scrubbing or forwarding. Any ideas?
Thanks,
Nat
I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth
Similar Messages
-
Video playback controls not working properly
video
I put a video into edge and it works but the player controls don't show up when you roll over any part of the movie they only show up if you roll over a specific area at the bottom of the video, A very small area. I want them to be there either always or when the user rolls over any part of the video. I attached a link of the video.I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth -
Premiere Pro CC Source and Program Playback Controls not working.. help please.
Hi,
Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
Thank you,
MauroDear Mark,
Thank you for the hint/link, reseting the toolbar did the trick.
Regards,
Mauro -
Pause FMR recording and video playback capture not working??
Hello!
I'm trying to record full motion recording in CAPTIVATE, but the PAUSE feature looks like it is not working for me. I even tried to modify the shortcut key, but nothing works. Anybody else have this trouble or am I missing something obvius here?? I thought that maybe the FMR mode cannot be PAUSED, but nothing on that matter can be found in the manual.
Also, I'm trying to produce e-learning content for PREMIERE and SOUNDBOOTH. I've noticed that video playback within PREMIERE is not captured by CAPTIVATE. I've seen on the forum that others had this issue. Is version 5 of captivate behaving the same? Is it still not possible to capture onscreen video playback?
Any info here would be greatly appreciated.
Thanks!I'm having the same problem where Captivate 5 in FMR doesn't respond to the Pause key, however I'm noticing that there hasn't been a solution supplied here.
Is there another location/forum where Adobe representatives for Captivate are actively monitoring questions and problems for this product?
-- Sam -
Video tag controls not working.
Hi,
I have a HTML 5 video tag in a page,
Play/ Pause for the video is working in Chrome/Firefox, But in case of I.E. it does not work.
The code is:
<video style="width:100%; height:100%" class="videoPlayer" controls="controls" runat="server" id="video1" onclick="this.play();">
</video>
Do I need to add extra code for Play/Pause for I.E.?
Thanks,
VinayHi Vinay,
I think this is what you need.
Using JavaScript to control the HTML5 video player
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Swf playback controls not working correctly
Hello all -
When I publish the Captivate project that contains a swf file
and an audio file everything plays well until I use the controls.
Stop/pause works fine,but when I use rewind or ff etc the swf file
will not rewind nor start over.
Any help would be appreciated
Thanks
RickUninstalling Glimmerblocker fixed the problem of Safari being able to access all web sites. One of the other many procedures I did must have solved the issue of the apps not launching.
-
DVD playback controls not working.
Hi, I’m a newbie to the forums (and video editing) and I suspect that my problem is down to basic user error/stupidity as I’m not trying to do anything complicated.
I’m using iMovie and iDVD ’08 and I’m trying to create a DVD with footage recorded on a home camcorder.
I imported the footage from my Sony DCR-PC110E straight into a new project in iMovie ’08. I’ve added titles and selected the clips I want and then exported it to a .mov file on my hard drive using the ‘Share’, ‘Export using QuickTime’ option.
I then created a new iDVD project and added my .mov movie to it. However, when I preview in iDVD, it doesn’t allow me to use the ‘rewind’, ‘fast forward’ etc controls. The only thing I can do is pause; all other controls are ignored or else it just goes back to the beginning of the movie. I haven't tried using Chapters yet. I tried to burn the DVD, thinking that it might just be in iDVD that the controls aren’t available, but the same thing happens. So I’ve ended up with a DVD with a movie of more than 1 hour which can only be played through as a whole.
Any help would be much appreciated.OK, my ten-year old son sorted it out! Now I feel doubly stupid.
-
I have downloaded SilverLight, I have updated Windows, I have unchecked the Acceleration option from Flash Player, yet all videos from any website are still playing slowly. Audio is fine, but not the video. At my wits end, as this was one of the key reasons I downloaded FF in the first place. Please help. I have read and done most if not all of the suggestions so far, so now posting this. Thank you. Craig.
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart. -
My iTunes video playback is not working.
So my videos haven't been playing on iTunes.
when I rent a movie, I cannot watch it, because it simply goes to a green screen.
I have updated everything that needs updating.
Also, the trailers don't even play- they're in green screen too.
I have tried renting in SD and HD and neither change the screen...
As much as I love hearing every sound of the movie, I'd like to watch it..
Any brainy folks outthere willing to help?If you installed DivX, that can prevent iTunes video content from loading. Check the DivX website for uninstall insructions.
-
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
DVI video out suddenly not working.
That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc. -
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
When I open Itunes on my PC it says, Itunes has detected a problem with your audio configuration. Audio/video playback may not operate properly. I removed some unused programs from my pc before this happened and I think I may have removed something I shouldn't have.
I had this same problem and my sixteen year old figured it out. Since the Windows PC running iTunes (which supports a housefull of AppleTVs) was running in a closet, he suspected it was due to having no speakers attached.
Sure enough, when I went into control panel to look at my sound settings, I noticed something I had missed previously. There was a red mark on the device. I took his advice and plugged in some earphones to the speaker jack and, wallah, the red mark turned green and the iTunes warning never popped up again.
Maybe you are looking for
-
not sure how to get past this?
-
Can connect with Macs but not PCs - iChat 2.1 OSX 10.3.9
Hi, I am having problems connecting to PCs but can connect to other Macs fine. I have ploughed through as much of the correspondance on here as I can find but with no luck. Would I be right in assuming that if I can connect OK to another Mac (with .m
-
Can I us my iphone4 sim in my iPad
I've read some info on using my AT&T data plan from my iphone4 sim. And put it my iPad.. I tried this once and got the AT&T and 3G icons in upper right of iPad but couldn't get Internet.. Tried changing setting and APN was not to be found.
-
Firefox doesn't work with Net Nanny. What to do?
Firefox will not go to any website (other than homepage - MSN), when program Net Nanny is enabled. I have to disable Net Nanny for Firefox to go to other websites. Do not have this issue with IE or Chrome. Solutions? Thanks
-
PSWATCHSRV does not auto-restart causing app server domain instability
Current environment: - Solaris 10 - Oracle 10.2.0.4 - PS HRCS 9.0 - PTools 8.49.19 - Weblogic 9.2 - Tuxedo 9.1 We have two PIA web sites that reside on the same PIA web domain. They each interact with a different app server domain residing on csapp81