Captivate 7 quiz freeze

Hello,
I have a 10 question quiz (all questions are mulitple choice from a quiz pool) that freezes up in random locations once it is uploaded to our LMS (Blackboard). I have this problem when I upload it as SCORM 1.2 or 2004.
I've made several modifications to the quiz based on discussions on this board but the quiz is still "freezing".
All Random question slide Action for success and last attempt is set to go to the next slide
All slides are set to .5 seconds and I've pushed the pause as close to the end of each slide timeline possible.
Report Answers checkbox is checked
When I leave the play bar available during the quiz you can see that the quiz "runs out" of play bar.
Quiz preference:
Completion Critera I have checked Quiz and selected Quiz is Passed. The quiz is set for a passing grade at 90%.
Check marked Success Critera and selected Quiz is Passed check box.
The LMS we are currently using is Blackboard Learn 9.1 Service Pack 11, Cumulative Patch 16
Thank you,
Nancy

Did you delete your quiz results slide? I have built custom quiz questions and because I never used an 'official' quiz question, I never got a quiz results slide (which CP automatically adds to the project when you add an 'official' quiz question). What I found was that my quiz would freeze at the strangest times...usually a few slides before the last  question. As soon as I added a dummy 'official' quiz question, then CP added in the quiz results slide and it never froze again. I looked at your screenshot and I couldn't see if you had a quiz results slide or not, so I figured I would ask.
I think there is some form of strabeness happening with the quiz questions reporting to the quiz result slide. It seems like CP doesn't report to the slide after every question is answered, but rather it fires something off when it thinks it's getting close to the end. If it can't find that slide, then it locks up. At least that's what has happened in the past for me. It would lock up both when I ran the module local on my desktop AND when I ran it through the LMS. As soon as I added a quiz results slide, it never locked up again.
Oh, and a hint about the special text boxes on quiz slides...If I don't want them to be seen, I move them ALMOST completely off the slide. I will leave one or two pixels on the slide so they will be rendered (x=799 for an 800x600 project) but the actual text or whatever is off the screen and nobody can see them...
Jonathon

Similar Messages

  • Quiz freezing up (Captivate 6)

    I am having a quiz freezing up on me in Captivate 6.  I have cleared the cache and still it freezes up.  It freezes on random slides.   I am only previewing the quiz in the web browser and have not published it to the LMS.  I have another project that works fine.
    Thank you,
    Christie

    Lilybiri,
    Thank you for the response.  When I am previewing the quiz (F12), it will allow me to take the quiz but it will freeze in random places.  This quiz has 30 random question slides from a pool of 51 questions.  At the end of the quiz I have a retake button and review quiz.  Please let me know if you think I should recreate this quiz.
    Thank you for your blog, it has helped me a lot.
    Thank you,
    Christie Word | Training Specialist
    P (806) 677-1682 | F (806) 353-8033
    [email protected]<mailto:[email protected]>
    When you go home, www.goHastings.com<http://www.gohastings.com/>
    cid:[email protected]<http://www.gohastings.com/

  • Captivate 5-Quiz-Freezing

    All of a sudden, Adobe Captivate starts freezing when I tried to delete slides or pictures while I'm working on quizzes. I uninstalled the software and reinstalled it on my laptop but it doesn't seem to help. Can you please let me know how I can solve this problem? Thank you for your time.

    No, you're not looking in the correct path still. Look at this path again carefully:
    C:\Users\Rod\AppData\Local\Adobe\Captivate 5
    This is NOT the My Documents folder, and it's not the Captivate 5 install folder (which would be in Program Files (x86) if you're on a 64 bit system).
    This is the folder inside your user profile where Captivate stores all those Preference settings you make when using the program.
    If you go back and browse to your user profile, you may not be seeing the AppData folder because these folders are hidden in Windows by default.  Search the Windows help files to find out how to Show Hidden Files and Folders.
    http://windows.microsoft.com/en-US/windows7/Show-hidden-files
    Then you should be able to see AppData\Local\Adobe\Captivate 5
    Make sure Captivate is closed down, then delete the Captivate 5 folder at the location shown above, and restart Captivate again.  The folder will be immediately recreated with fresh settings.
    If your issue stems from corrupted preferences, this might fix it.

  • Can you submit a User Variable instead of the Captivate Quiz Score variable to an LMS?

    I am attempting to create two quizzes in a course that has branching.  I know that Captivate only allows for one quiz if you are using Question type slides, but I am using a simulation to check the knowledge of a process.  I want to report one of the simulation completions depending on which branch the user goes to (different branches for different products).  How or is it even possible to submit user variables in place of the Captivate Quiz Score variable, the time in the course variable, and the Pass or Fail status to an LMS?

    Sadly, I am using Captivate 5.5.  I was thinking it should be possible to use Javascript to be able to take a specific variable and submit it to the LMS in place of Captivate's Quiz variables.  I just don't know Javascript well enough to know how to do that.

  • Problem with registering Captivate Quiz score in LMS

    We are using Integrity e-Learning’s WBT manager for our
    LMS. We have been using Captivate (SWF files) for several months to
    show simulations for software. Generally we are quite happy with
    the software.
    We have been able to easily create a quiz (a Captivate
    generated SWF file) and access it through the LMS (using a HTML
    frameset), unfortunately we are having trouble passing the
    numerical score the quiz generates to the LMS.
    When a student takes a Captivate Quiz (bound into a SWF
    file), the final score displays on the final frame of the SWF file,
    but is not getting passed to the LMS. All the other data seems to
    be fine. So far we are only viewing status using the Lesson
    Progress Report, which indicates “no score (n/a)”. In
    this case we are embedding the SWF file into a HTML page contained
    in a frameset.
    We have been able to get a score successfully passed to the
    LMS if we link directly to the .swf file, bypassing HTML
    altogether, unfortunately we also get a warning about using Flash
    Player and multiple warnings about downloading the
    “aicc_int.asp” file.
    I have read through:
    “Output Options in Captivate” by Andrew Chemey
    (Parts 1, 2, 3, and 4)
    “Exploring Quizzing in Macromedia Captivate” by
    Mark Fletcher
    “Integrating Captivate-Generated Learning Objects into
    WBT Manager, Part 1 and 2” by Carol Fallon
    Has anyone had this problem and solved it?
    TPK

    Please contact me at [email protected] I have many
    examples of Captivate passing scores sucessfully back to WBT
    Manager. So hopefully I can help you figure out what is going on.
    Carol Fallon
    Integrity eLearning

  • Captivate Quiz Results Analyzer - Error in Results

    Dear Sir
    I  don't understand why I got the results below. All questions were reflected as 'Total Skipped' when all was answered.
    Your inputs would be very much appreciated.
    Thanks & regards...

    So I figured out I made a stuipd mistake and mixed up acrobat.com and adobe.com. I kept trying to connect to Adobe.com, NOT acrobat.com.
    Once I connect to Acrobat.com (and made an ID) it worked.
    I now can connect to Acrobat.com.
    However, I still am unable to see my results.
    If I try to do a quiz from my local machine I am prompted with the "Post Results" button at the end.  When I go to production I do not want to have this button, I would rather have the quiz automatically posted.  For now, this will work for the testing phase I have working on.
    When I run my quiz in IE, IE hangs when I press Post Results and put my name and password in.  It never completes.  I have to kill the process.
    When I run the quiz from File > Preview > In Web Browser (or F12) it seems to work.  I get prompted with my ID I put my info in and it says it has been posted, but I never see any results.  This is similar to another post I saw here... 
    http://forums.adobe.com/thread/766837?tstart=0
    Then I saw another post that said you need to modify the flash settings on the machine where you are posting.  You can do this via a URL link...
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
    When I went to this link the first time I only specified the actually acrobat.com.  This didn't seem to help.  But them I specified the actually .swf file.  This made things appear to work.  I *was* able to press post, put login info in and then submit the info.  This worked without having the do the preview from within Captivate.  But I still do not have any data within the Adobe Captivate Quiz Results Analyzer.
    If I do get some results somehow, I would still like to make the quiz such that the username and password are not prompted at the end and that the results are sent to acrobat.com automatically.

  • Error when posting captivate quiz results

    I would like to posting Captivate quiz results to Acrobat.com. I created an account, but when I click Post Results and log in, I get a 'Send' button option. When I select 'Send', the message 'Unknown Error' appears and the results do not get posted.
    Any thoughts?
    Thanks

    I am also still having the same problem, so it looks like this still hasn't been fixed.
    Posting results worked fine but lately everyone is getting the unknown error which is embarrassing when you are pushing directors to complete this only to be told it isn't working and wasted their time.
    Sort it out Adobe!

  • Captivate 7 freezing when trying to edit spelling preferences?

    It's really as simple as the title says. My version of Captivate 7 freezes everytime I open spelling options?
    I'm using the Mac version.
    Has anyone else had this problem? Am I missing some files, or something?

    Hi nic_murdock, Can you check whether you have "Linguistics" folder created under "/Library/Application Support/Adobe"? if not, can you do the following steps
    Close Captivate if it is open.
    Step 1
    Open finder
    Open the Go menu and select “Go to Folder”
    Type in /Library/Application Support/Adobe and click on Go button
    Create a new folder and call it Linguistics
    Inside the Linguistics folder, create another folder and call it 6.0
    Leave this open. We will come back to it
    Step 2
    Open new finder window (File->New Finder Window)
    Open the Go menu and select “Go to Folder”
    Type in /Applications/Adobe Captivate 7/required/Plug-Ins/mac/Linguistics and click on Go button
    Select the 2 folders LanguageNames2 and Providers and copy them
    Go back to the other finder window which we opened earlier in Step 1 and paste it inside the folder 6.0
    Launch Captivate and check the spelling preferences.
    Let us know if this still doesn't resolve the issue. You can send a mail to me at sankaram at adobe dot com.
    P.S : All the folder names are in bold.
    Thanks,
    Sankaram.

  • Captivate 5 freezing issue when trying to add closed captions to video

    Hi There --
    I'm trying to add closed captions to a video (.f4v) I inserted as "Slide Video" on a slide in an Adobe Captivate 5 presentation.  I click on the video to select it, go to the properties panel, select "edit video timing" and then click on the closed captions panel to try and add captions and then Captivate completely freezes and locks up so not only can I not add captions to the video, but I have to use Windows task manager to shut it down.
    I've seen this process demonstrated in a Lynda.com tutorial, and the instructor didn't seem to have this issue with Captivate 5.
    Any thoughts?  Have other users found a work around at all?  I mean, I know I could strip the audio from the video, and then attach it to the slide and do closed captions that way, but it would be way easier (and make a lot more sense) to add it directly to the video, especially since that's what you are supposed to be able to do.
    I'm using Captivate 5 on Windows 7.  I also have Captivate 5 on a personal Macintosh and haven't tried yet to see if the issue occurs on that platform as well.  Has anyone else run into this issue?  Sorry for the length -- this is my first forum posting, so I'm trying to provide as much info as possible.

    Hi Dan,
    Welcome to Adobe Captivate Forums.
    You can try to add the closed captions to Video after deleting the preferences.
    Follow these steps to delete the preferences
    1.  Close Captivate if its launched already
    2. Navigate to C:\Users\<userName>\AppData\Local\Adobe
    3. Locate a folder named "Captivate 5"
    4. Delete the folder
    5. Now Launch Captivate and try your workflow
    Let us know if this solved the issue .
    -Ashwin Bharghav B
    Adobe Captivate Team

  • Generate Report Troubles with Adobe Captivate Quiz Results Analyzer

    I'm new to Captivate 5 and am trying to utilize the Adobe Captivate Quiz Results Analyzer.
    I've enabled report for my project to Acrobat.com and configured as instructed in the online help.  The Post Result button appears on the Summary page and appears to work for the two colleagues taking the quiz.  But when I click the Generate Report button in Adobe Captivate Quiz Results Analyzer, I get the message "Data is not present on local file system, downloading course data," but nothing occurs - no course data appears from the colleagues who are helping me test the quiz.
    I'm able to sign in to the Quiz Results Analyzer and it does display the organization, department and course name, but no course data (see image below).
    What am I doing incorrectly that keeps this from generating a course report?
    Any help will be deeply appreciated.

    Vish,
    Your solution worked at first.  I went in, took the course, and then went into Analyzer and was able to Generate Report and look at my stats.  However, I had a colleague take the course.  She did and posted the results and received a "successful" posting message.  Then, I went back into Analyzer and clicked the Generate Report button to see how the system worked when there was new learner data.  A "Checking for new data" played for a half hour before I finally gave up.
    I know that you were able to reproduce this issue where in clicking the Generate Report a second time brings up the loading animation that stays forever and that you were investigating the issue, but I thought I should post here just in case anyone else has a solution.
    Thanks,
    Jeff 

  • Identifying Questions in Adobe Captivate Quiz Results Analyser

    Hi All,
    We have seen people requesting for identifying the Question from with in Adobe Captivate Quiz Results Analyser. In what way do you think Question needs to be reperesented within Adobe Captivate Quiz Results Analyser?
    Will it useful if we show the actual thumbnail of the question itself?
    Or just showing the Question text will suffice?
    Thanks,
    Vikram

    Maybe you'd be better off turning off the shuffling of answers (given that it fouls up the reliability of the variable representing what you want) and use Question Pools instead.
    This would allow you to get some randomisation of the questions (which is what the answer shuffling is sort of trying to accomplish) but you'd be tracking actual questions.  You could have a number of variations of the same question in the pool.
    Does that get you any closer to your goal?

  • Adobe Captivate Quiz Results Analyzer

    Is it still available for Captivate version 8?

    Hi There,
    Please visit the given below URLs to know about how Internal Server Reporting works with Adobe Captivate Quiz Results Analyzer -
    http://blogs.adobe.com/captivate/2010/08/reporting-the-quiz-results-to-a-local-server.html
    Adobe Captivate Help | Report to Acrobat.com or internalserver
    Note - In Captivate version 8, Reporting to Acrobat.com has been removed.
    Regards,
    Ajit

  • Adobe Captivate Quiz Analyzer not reporting

    When I login to Captivate Quiz Analyzer the Course selection shows what appears to be a course code and the student name and I can not generate a report. Please see the screen shot attached.  Any Help? Thank you!

    Please see the answers to your question in red below.
    Thank you,
    John P Dietz | Supervisor, Education Services | Digital Printing Solutions
    | Graphic Communications Group |
    Eastman Kodak Company | 3000 Research Blvd | Dayton, OH 45420 |
    [email protected] | 937.259.3406 Office | 937.781.8406 Fax |
    www.kodak.com
    The information contained in this e-mail is confidential. It is intended
    only for the use of the named recipient(s). If you have received this
    e-mail in error, please immediately inform the sender and delete the
    message. If the reader of this message is not the intended recipient, you
    are hereby notified that any dissemination, distribution, or copying of
    this communication is strictly prohibited.
    From:
    Himanshu satija <[email protected]>
    To:
    jpdietz <[email protected]>
    Date:
    02/25/2014 11:34 AM
    Subject:
    Adobe Captivate Quiz Analyzer not reporting
    Re: Adobe Captivate Quiz Analyzer not reporting
    created by Himanshu satija in Adobe Captivate - View the full discussion
    Hello,
    Can you tell me the version of Adobe Captivate quiz result analyzer you
    are using ? 1.5
    Can you tell me the version of Adobe Captivate from which the course was
    published ? 5.6.3.631
    What happens when you click on Generate Report ? I get the error "No
    results available for this course."
    Thanks and Regards
    Himanshu satija
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in
    the forum to embed the image at
    http://forums.adobe.com/message/6155573#6155573
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/6155573#6155573]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/6155573#6155573]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Captivate at Adobe Community
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Adobe captivate quiz maker

    Can i download only adobe captivate quiz maker software ?

    Hello,
    Welcome to Adobe Forums.
    Do you have 26 different projects ?
    Which version of Captivate are you using ?
    Do you have MAC or Windows ?
    Any Error message while generating results for those 5 courses ?
    Thanks,
    Vikram

  • Adobe Captivate Quiz Results Analyzer not generating results

    I am using Acrobat.com to track my quiz results. I currently have 26 modules, however 5 of them will not show results in the Adobe Captivate Quiz Results Analyzer. I have tried the quizzes myself and posted the results, however it is still not showing results for the 5 courses. Any suggestions as to why 5 of the courses aren't generating?

    Hello,
    Welcome to Adobe Forums.
    Do you have 26 different projects ?
    Which version of Captivate are you using ?
    Do you have MAC or Windows ?
    Any Error message while generating results for those 5 courses ?
    Thanks,
    Vikram

  • I want to integrate captivate quiz with my flex application.

    I am new to flex. I want to integrate flex application with captivate quiz. I could not find good documentation for this. Can any one please give me some url to find good documentation or some example. Thank you

    I'm interested in using FLEX to create a widget that I load INTO a Captivate project. How would that change this approach?
    Also, I've attempted to build a Flex 4 project (sdk 4.1) with this code, and it's generating the following errors:
    Description
    Resource
    Path
    Location
    Type
    1119: Access of possibly undefined property testing through a reference with static type flash.display:DisplayObject
    Cp5Widget.mxml
    /Cp5Widget2/src
    line 26
    Flex Problem
    1120: Access of undefined property ldr
    Cp5Widget.mxml
    /Cp5Widget2/src
    line 20
    Flex Problem
    1120: Access of undefined property ldr
    Cp5Widget.mxml
    /Cp5Widget2/src
    line 21
    Flex Problem
    1120: Access of undefined property loadedSWF
    Cp5Widget.mxml
    /Cp5Widget2/src
    line 20
    Flex Problem
    I've created the var_text.swf by creating a CP5 project that has the variable with a pre-defined value, and a button to set a new value.
    Unfortunately, the project doesn't appear to load due to the errors present.
    If you could find time to post a couple sample files, it may help us beginners!

Maybe you are looking for

  • How can I download a firmware on my iPod touch 4 gen I want to put 5.0 firmware

    I try downloading the 5.0 firmware but I don't know

  • Hard Drives Constantly Failing

    I just received a new hard drive Monday through an AASP in Puebla, Mexico, due to a hard drive failure within two months of purchasing my laptop. Sadly, I'm now reinstalling OSX due to what appears to be a very similiar hard drive failure. Luckily, m

  • GUI_DOWNLOAD - Column Width

    Hi all, I have a requirement to use gui download but im having problem in its column width, i want the excel to have a column width same as the title of the column, is this possible (to have different column width in the output excel file) Thanks.

  • Join engine stop

    I have a problem with Join engine. It stop sometimes whithout logs, .... I have a Windows 2000 server.

  • Upgrades in Full Infrastructure Mode

    Hi there I've been considering the Upgrade scenario for an application. To my knowledge this was handled better in App-V 4.6 but I would be very happy to be corrected. My question comes in 2 scenarios.  Scenario A: We have an application (EG: Chrome