Capture auto generating seqs

Hi,
Is there a way with FCP to auto create sequences during DV capture based on the timestamp of the clips on the tape? I mean one sequence per take.
Thanks,
fred.
Mac OS X (10.4.3)

If your timecode is as it should be, there will be no breaks.
I should have mentioned - If you are shooting HDV and capturing in FCP5, you have the option of either capturing continuous clips or having FCP break them into discrete shots. This is due to the highly problematic nature of the 15 frame GOP format of HDV.
have fun.
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

Similar Messages

Auto-generated objects are not generated - CP2 and CP1

Hi folks,
Almost nothing that is dependent on the Event Handler works.
When I "click" during recording, nothing is added to the new movie
except the capture of the background ... no matter the
recording mode used. When recording in Demo mode, text captions and
highlights should be auto-generated, but are not. And when
recording in either of the Assessment modes, clickboxes and other
interactivity that should be auto-generated are not.
Sudden onset - no prior trouble.
Both Captivate 1 and 2 are loaded and the problem exists with
both. Yet both were fine earlier (though I don't know when this
happened, I just know it was discovered on both at the same time
yesterday.)
Any help is greatly appreciated.

Hello toddfromheber,
I'm sorry to hear you are having these issues with your passwords. If you are having issues with iCloud Keychain not sharing or autofilling your generated passwords, you may find the troubleshooting steps outlined in the following article helpful:
Get help using iCloud Keychain - Apple Support
Sincerely,
- Brenden

Auto Generated No with Date and year

I m using this method to create a auto generated no.
in pre-insert trigger
declare
          v_l varchar2(10);
     begin
          select max(doc_no) into v_l from Table ;
          if v_l is not null or v_l<>0 then
               :table.doc_no:= v_l+1;
          else
               :table.doc_no:=1;
          end if;
     exception
          when no_data_found then
          :table.doc_no:=1;
     end;I want to generate auto generate no|| month||year
please guide me

Kame wrote:
I want to generate auto generate no|| month||year
please guide meYou can get an auto-generated number using SEQUENCE in Oracle.
Do you have a specific date column in your table from which you need to get the MONTH and YEAR Data?
To get MONTH, you can use something like:
TO_CHAR(your_date_column, 'MONTH')To get YEAR, you can use
TO_CHAR(your_date_column, 'YYYY')your_date_column should contain data of date datatype.
Examples:
SQL> CREATE SEQUENCE SEQ
2     MINVALUE 1
3     MAXVALUE 999999999
4     START WITH 1
5     INCREMENT BY 1
6 /
Sequence created.
SQL> SELECT SYSDATE FROM Dual
2 /
SYSDATE
10-JUN-09
SQL> SELECT TO_CHAR(sysdate, 'MONTH') FROM Dual
2 /
TO_CHAR(SYSDATE,'MONTH')
JUNE
SQL> SELECT TO_CHAR(sysdate, 'YYYY') FROM Dual
2 /
TO_C
2009
SQL> SELECT      TO_CHAR (SEQ.NEXTVAL)
2           || TO_CHAR (SYSDATE, 'fmMONTH')
3           || TO_CHAR (SYSDATE, 'YYYY')
4              auto_gen
5    FROM   DUAL
6 /
AUTO_GEN
1JUNE2009
SQL> /
AUTO_GEN
2JUNE2009
SQL> /
AUTO_GEN
3JUNE2009
SQL> /
AUTO_GEN
4JUNE2009
SQL>Hope this helps.
Regards,
Jo
Edit: Corrected Query

Auto generate employee/applicant number

Hi All
I want to auto generate the employee and applicant number as follows:
ABCW0000001
ABCS00000001
Where first 3 characters i.e., ABC stands for the company name and fourth characters i.e., W stands for Workers and followed by the employee number.
The category of employee i.e., Staff or Worker is captured in the People Group segment in assignments.
I can write a fast formula to auto generate the employee numbers, but as employee number has to be generated first before updating the assignments.
How to auto generate the numbers before updating the assignments?
Thanks in advance for any help.
Regards
Rahman

Hi
Do you have multiple assignments over there?There are no multiple assignments.
If not, can you move the people group segment to the people screen?How can I move this to People Screen?
What should be the empl number if the people group changes anyway?If the employee gets promoted, say from worker to staff, then a new number should be generated from the date of new assignment. Also the old number should not be used in future.
Thanks for the help.
Regards
Rahman

Creating an auto-generating menu for fluxbox

Fluxbox is one of the best wms for linux. If there's something that could replace any desktop, with low resources consumption, still being accessible and handy, than that's Fluxbox. The thing is when you install Fluxbox for the first time you feel something is lacking. That thing is the possibility of an auto-generating menu. Of course there's
fluxbox-generate_menu
and other likewise possibilities but they kinda fail in doing what they should. I'm a bit new to programming and even fresher when it comes to scripting in linux but I've though of a script that could do just that as it follows:
#!/bin/bash
while true
do
men="ArchSoft"
ver=$(grep "$men" ~/.fluxbox/menu | sed 's/.*(//; s/).*//' | tail -1)
if [ $men == $ver ]
then
data="$(date +%Y-%m-%d\ %k:%M)"
data2="$(grep "$data" /var/log/pacman.log | grep installed | sed "s/\[//g; s/\].*//g" | tail -1)"
if [ "$data" == "$data2" ]
then
nr="$(grep "$data" /var/log/pacman.log | grep installed | wc -l)"
int=$(seq 1 $nr)
for i in $int
do
ch=$(grep "$data" /var/log/pacman.log | grep installed | sed 's/.*installed//g; s/(.*//g; s/ //g' | head -$i | tail -1)
chr=$(grep "$ch" ~/.fluxbox/menu | sed 's/.*(//; s/).*//' | tail -1)
chb=$(ls /usr/bin | grep "$ch" | sed "s/.*$ch.*/$ch/" | tail -1)
la=$(ls /usr/share/icons/hicolor/48x48/apps | grep $ch | sed "s/.*$ch.*/$ch/"| tail -1)
lb=$(ls /usr/share/pixmaps | grep $ch | sed "s/.*$ch.*/$ch/" | tail -1)
if [ $ch == $chb ]
then
if [ $ch == $chr ]
then
echo "there's already a menu entry"
else
if [ $ch == $la ]
then
sed -i "/^\[submenu\] ($men)$/a[exec] ($ch) {$ch} </usr/share/icons/hicolor/48x48/apps/$ch.png>" ~/.fluxbox/menu
sleep 1
fluxbox restart
elif [ $ch == $lb ]
then
sed -i "/^\[submenu\] ($men)$/a[exec] ($ch) {$ch} </usr/share/pixmaps/$ch.png>" ~/.fluxbox/menu
sleep 1
fluxbox restart
fi
fi
fi
done
fi
rdata="$(grep "$data" /var/log/pacman.log | grep removed | sed "s/\[//g; s/\].*//g" | tail -1)"
if [ "$data" == "$rdata" ]
then
nrem="$(grep "$data" /var/log/pacman.log | grep removed | wc -l)"
inrem=$(seq 1 $nrem)
for i in $inrem
do
rem=$(grep "$data" /var/log/pacman.log | grep removed | sed 's/.*removed//g; s/(.*//g; s/ //g' | head -$i | tail -1)
remr=$(grep "$rem" ~/.fluxbox/menu | sed 's/.*(//; s/).*//' | tail -1)
if [ $rem == $remr ]
then
sed -i "/$rem/d" ~/.fluxbox/menu
sleep 1
fluxbox restart
else
echo "no menu entry to remove"
fi
done
fi
else
sed -i "/^\[begin\] (Fluxbox)$/a[submenu] ($men)\n[end]" ~/.fluxbox/menu
fi
clear
sleep 7
done
Explanation:
I've used
whilde true
do
sleep 7
done
to create an endless loop where "sleep" was used so it could take a break, therefore reducing hardware consumption
men="ArchSoft"
ver=$(grep "$men" ~/.fluxbox/menu | sed 's/.*(//; s/).*//' | tail -1)
if [ $men == $ver ]
then
else
sed -i "/^\[begin\] (Fluxbox)$/a[submenu] ($men)\n[end]" ~/.fluxbox/menu
fi
This checks if the submenu where everything should automatically be added as entries are already there, if not it creates them under the beginning of fluxbox menu script with the name ArchSoft.
data="$(date +%Y-%m-%d\ %k:%M)"
data2="$(grep "$data" /var/log/pacman.log | grep installed | sed "s/\[//g; s/\].*//g" | tail -1)"
if [ "$data" == "$data2" ]
then
fi
this compares the actual data from the system clock with the data of the installed apps shown in pacman .log and if it finds a similar data of the installed apps it procedes to further steps
nr="$(grep "$data" /var/log/pacman.log | grep installed | wc -l)"
int=$(seq 1 $nr)
for i in $int
do
ch=$(grep "$data" /var/log/pacman.log | grep installed | sed 's/.*installed//g; s/(.*//g; s/ //g' | head -$i | tail -1)
chr=$(grep "$ch" ~/.fluxbox/menu | sed 's/.*(//; s/).*//' | tail -1)
chb=$(ls /usr/bin | grep "$ch" | sed "s/.*$ch.*/$ch/" | tail -1)
la=$(ls /usr/share/icons/hicolor/48x48/apps | grep $ch | sed "s/.*$ch.*/$ch/"| tail -1)
lb=$(ls /usr/share/pixmaps | grep $ch | sed "s/.*$ch.*/$ch/" | tail -1)
if [ $ch == $chb ]
then
if [ $ch == $chr ]
then
echo "there's already a menu entry"
else
if [ $ch == $la ]
then
sed -i "/^\[submenu\] ($men)$/a[exec] ($ch) {$ch} </usr/share/icons/hicolor/48x48/apps/$ch.png>" ~/.fluxbox/menu
sleep 1
fluxbox restart
elif [ $ch == $lb ]
then
sed -i "/^\[submenu\] ($men)$/a[exec] ($ch) {$ch} </usr/share/pixmaps/$ch.png>" ~/.fluxbox/menu
sleep 1
fluxbox restart
fi
fi
fi
done
Here because in pacman.log, the data of installed apps is shown in this manner YY-MM-DD hh:mm I had to consider using "for do", because in a minute a lot of applications can be installed using only a single "$pacman -S apps" command. Therefore I had to add somehow every app installed in a minute, separately to ~/fluxbox/menu. If the data of the installed apps in pacaman.log was show in this manner YY-MM-DD hh:mm:ss, therefore including seconds things would had been a lot more easier and precise, but I had to find a solution to that matter, and that solution was using "for do" .
Also here it checks if the installed program shows as an executable in /usr/bin and if it has an icon in /usr/share/icons/hicolor/48x48/apps/ or in /usr/share/pixmaps/, and only than it procedes in adding an entry to fluxbox menu for that app. This was necessary because not all programs installed, that have executables in /usr/bin are meant to be displayed as a fluxbox menu entry. Checking for an icon being a filter and at the same time something kinda useful for the overall aspect of the menu.
rdata="$(grep "$data" /var/log/pacman.log | grep removed | sed "s/\[//g; s/\].*//g" | tail -1)"
if [ "$data" == "$rdata" ]
then
nrem="$(grep "$data" /var/log/pacman.log | grep removed | wc -l)"
inrem=$(seq 1 $nrem)
for i in $inrem
do
rem=$(grep "$data" /var/log/pacman.log | grep removed | sed 's/.*removed//g; s/(.*//g; s/ //g' | head -$i | tail -1)
remr=$(grep "$rem" ~/.fluxbox/menu | sed 's/.*(//; s/).*//' | tail -1)
if [ $rem == $remr ]
then
sed -i "/$rem/d" ~/.fluxbox/menu
sleep 1
fluxbox restart
else
echo "no menu entry to remove"
fi
done
fi
This part of the script removes the data from the menu entry pretty much in the same manner it was added, so I won't give further explanations.
The Trouble:
Most applications are added and removed just fine in the fluxbox menu entry, but some like chromium are added more than once and after pacman -R app they aren't removed. The script has still a lot of flaws, most of them because I'm new to scripting, but if someone can improve it or give suggestions it would be highly appreciated. Also if anybody that finds the script worthy enough, wants to develop it as his own I have nothing against it, just tell what changes and improvements you have brought as I wanna learn too.
Also my goal is to make a daemon out of it, any suggestions in this direction would be highly appreciated.
Thanks for your time and understanding, mostly thanks to those that helped me a bit in understanding the syntax, like @Karol & @falconindy. You rule, 'cause you make linux seam like one big happy family
George
Last edited by I'mGeorge (2011-06-20 19:43:08)

This is an awesome idea. I've wanted to do something like this for a little while, though not in bash...
Since I'm not great in bash, I may make one in C (for learning) or Python (ditto) and comment on your implementation.
If I understand right, you're building a menu first, then deleting parts of it as you go. Would it not be smarter to create a function for adding entries and call it only after you've decided whether an app belongs in the menu? Something like this:
function add_to_menu() {
# echo whatever to the config file
if (app is on system && has an icon somewhere in /usr/share or /opt) {
add_to_menu(foo)
Personally, I would approach this by using a definition or grouping list (so you can make submenus) and organize your apps that way. I'd probably use an sqlite db or an ini file or some other way to store the heirarchy, then generate the menu. It looks like you've already put a lot of effort into this, though, so I wish you luck on it!

How to change Auto-generated web service's URL

Hi,
is it possible to change/edit the auto-generated url of a web services created with the wizard in SE80 transaction?
Example:
Now the wizard generates a URL as following:
http://<host name>:8080/sap/bc/srt/wsdl/bndg_4BC67655E5155680E10000000A7B0410/wsdl11/allinone/standard/document?sap-client=001
where the alfa-numeric code 4BC67655E5155680E10000000A7B0410 changes every time I create the service. at the same time and for the reason above, I have to change the LOGICAL DESTINATION with "visual administrator" application to consume the service in SAP Netweaver environment.
Thanks in advance.
Luca

Hi Luca,
Please refer the below link . it is described that URLs and its Namespaces . Please check whether its useful.
[http://help.sap.com/saphelp_nw70/helpdata/EN/8c/780741375cf16fe10000000a1550b0/frameset.htm] .

Numbers-Auto Generating a numbered list in a column of cells

Having trouble creating an auto-generating numbered list in a single column. In text inspector I choose bullets>numbers>start at 1. The first cell is filled in with a "1", but when I hit return or down arrow the 1 disappears. If I go back and type a "1" again, two "1's" appear in the same cell. I'm trying to make a table with 250 rows. Not sure what I'm missing, as I'm new to iWork.

Numbers can fill a column or row of cells with a pattern. Type the first two numbers in the first two cells, select both cells, then click on the small circle at the lower right of the second cells & drag down to fill however many cells you want. You can see in this picture that it works for other patterns, not just consecutive numbers. I've also used it to fill across month names or dates.

Auto generated types and ps1xml formatting files

Hello,
I'm using New-WebServiceProxy to work with a web service... when I call methods of the web service powershell auto generates types, for example, things like "Microsoft.PowerShell.Commands.NewWebserviceProxy.AutogeneratedTypes.WebServiceProxy1_webservices_awebservicepage_asmx.TheMethodReturnObjectType"
1. should I just use that type name in my ps1xml formatting file? I'm wondering if that will be fragile... seems fragile like 'webServiceProxy1' for example, what if there is some scenario it uses '2'? Not sure if I can count on that being consistent?
2. I started creating custom objects and adding my own type name to them so that type name could be used in the ps1xml file. This works fine. However so far it was for web service methods that returned single instance results.. now I hit a point where I'm
calling a web service method that will return a collection... so I'm wondering if it would be better to just use the auto generated type name in the ps1xml or, as I would need to do in this case, actually enter a foreach loop to create a new custom object
for every object in the returned collection? In other words, for the web service methods I've used so far for this, I simply created my custom object and write-output... for the case of the collection, I would be new-object'ing and write-output'ing within
that foreach loop.. wondering about performance issues, or if it's just overkill when I could just put that auto generated type name in the ps1xml file and be done with it...
not sure if I've asked that very clearly...
essentially, I'm wondering if it's overkill (from a resource usage perspective) to be creating these custom objects in the case of when there will be a collection, with potentially hundreds of items, when the only reason I'm doing it is for display purposes...
if it were not an autogenerated type I would simply use the type name in the ps1xml, I'm just not sure if I can do that in this case as I don't know if that typename will *always* be the same?
any input would be appreciated, thanks

Hi DJC,
I haven't rexperienced this, however, to create a .ps1xml file, these examples may be helpful for you:
Creating a module for powershell with a format file
discutils / utils / DiscUtils.PowerShell / DiscUtils.Format.ps1xml
about_Format.ps1xml
I hope this helps.

Auto-generated Swing Code: jbInit()

Hi,
I noticed that the auto-generated code for Swing apps directly uses class member variables, which is far from ideal. For example:
public class Screen {
    private JLabel boardingPassLabel = new JLabel();
    public void jbInit() {
        boardingPassLabel.setText("Boarding Pass");
        boardingPassLabel.setBounds(new Rectangle(170, 25, 115, 20));
        boardingPassLabel.setFont(new Font("Tahoma", 1, 12));
}The issue is that instantiating Screen will cause a JLabel to also be instantiated. While this is fine for a single screen and a single label, if there are hundreds of screens, each with twenty labels and buttons, it quickly gets out of hand.
It would be nice to see the following code auto-generated:
public class Screen {
    private JLabel boardingPassLabel;
    public void jbInit() {
        JLabel boardingPassLabel = getBoardingPassLabel();
        boardingPassLabel.setText("Boarding Pass");
        boardingPassLabel.setBounds(new Rectangle(170, 25, 115, 20));
        boardingPassLabel.setFont(new Font("Tahoma", 1, 12));
    public JLabel getBoardingPassLabel() {
      if( boardingPassLabel == null ) {
        boardingPassLabel = createBoardingPassLabel();
      return boardingPassLabel;
    protected JLabel createBoardingPassLabel() {
      return new JLabel();
}This allows subclasses to provide a different subclass of JLabel (if needed). It also means that there is little overhead to instantiating the Screen class. Thus if we had to instantiate 100 screens, each with 20+ widgets, there would be no performance hit.
As a work-around, we can simply not instantiate the Screen classes until just before they are used. This may not work in our situation, though.
Thoughts?
D

I should probably add a detail here.
We are running the Swing app on the CrEme JVM under Windows CE on a 520 MHz hand-held device with at most 256 MB of memory. (The specs say 520 MHz; but runs slower in practice.) Thus we need a lot more control over object instantiation, as has been described.
It would be nice to see a "use lazy initialization" checkbox for the auto-generated code. Or perhaps a "generate and use accessors" checkbox.
Note that the following code contains a redundancy:
    private JLabel boardingPassLabel = null;The assignemnt to null is superfluous; it adds about 50 more bytes to the final class size (using Sun's javac). It can be omitted for class member variables.
D

Excise Invoice number not display in case auto generate

Dear Experts,
we have use auto excise invoice generation functionality, it is working properly, but only Excise Invoice number not display after saving billing document. what to do for display the same after saving billing document.
Regards
BK GAIKWAD

Thank you Lakshmipathiji,
My question is when we have create excise invoice through J1IIN excise invoice number has been display in bottom line after saving billing document.
But in case we have creating auto generate Excise invoice, Excise Invoice number not display in same screen. How to do to display excise invoice after saving billing document.(Excise invoice generating in background but number not display in same screen)
We have changeover manual to auto generate excise invoice system.
Regards
BK GAIKWAD

HOW TO GET AUTO GENERATED PRIMARY ID KEY BACK FROM AN INSERT STATEMENT IN .

Just recently I ran into a problem with what seems to be a deficiency in the Oracle Database. When trying to return an auto-generated key as is done in Microsoft's SQL database, it seems Oracle for whatever reason didn't add this capability, the key couldn't be passed back to the .Net call. After tinkering with the .Net software and talking with the Oracle techs, a decent work around to the problem (presented here) comes fairly close. Two things have to be done first before this will work. A sequence has to be created on the Oracle DB. Also a trigger has to be created against the table the keys are going to be returned from.
The class works by passing to the function 'update_datasets_return' a DataSet with as many tables as you want. The function spins through the tables and put the keys in each row inserted. It's assumed the first row will either be the primary key or some numeric value. This can be changed by modifying the: dt.Columns(0).ColumnName
Notice the word Inserted. On Updates and Deletes the key value is ignored because it's already present. The routine just updates the database as usual.
So in other words you could send a table to the function with rows inserted, deleted, or updated and it will take care of them all. One routine for all.
' ======================================================================
' Created by SEF and Oracle SR: 5607364.993 This is a complete Redo
' of the initial concept. SEF...
' Sample of sequence and trigger at bottom.
' Uses the ODP.NET data provider.
' update_datasets_return: Goes thru each table in the dataset and
' updates, deletes, or inserts as needed.
' If inserting, a 'sequence counter' and a 'trigger'
' using the 'before insert' must be present. The sequence
' counter is set to auto increment by 1 starting at 1.
' The trigger is specific to the table.
' Create the trigger and sequence in the database or run the samples
' below in PL/SQL. Be sure the logon with a user that has enough rights.
' Routine assumes the first column is going to hold the sequence
' number. Actually any column could be used. Just change the
' dt.Columns(0).ColumnName to whatever you want or leave as default.
' The da_RowUpdated sub is where the 'sequence number' gets returned
' on each row that is inserted into a table. Routine is ignored on
' deletes and updates. SEF...
' =======================================================================
Imports System
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class OracleUpdate
Private Shared m_conn As OracleConnection
Private Shared da As New OracleDataAdapter
Private Shared dt As DataTable
Private Shared conn As New OracleConnection
Private Shared dr As DataRow
Private Shared astep As Long
Private Shared rwIndex As Integer = 0
Private Shared tblIndex As Integer = 0
Public Shared Function update_datasets_return(ByVal constr As String, ByVal ds As DataSet) As DataSet ''ByRef ds As DataSet)
Dim selectstmt As String
m_conn = New OracleConnection(constr)
Try
m_conn.Open()
Catch ex As Exception
Throw New ArgumentException(" Error: connection lost." & ex.Message)
End Try
For Each dt In ds.Tables
''Uncomment the code only if auto numbering
''is NOT turned on for the table being updated. SEF...
''rwIndex = 0
''For Each dr In dt.Rows
'' Try
'' Select Case dr.RowState
'' Case DataRowState.Added
'' astep += 1
'' ' =======================================================
'' ' This "Try Catch" section created only if auto numbering
'' ' is NOT turned on for the table being updated. SEF...
'' ' It's a crude attempt at creating a unique number.
'' ' A more serious approach would be to use a GUID.
'' ' Use only if you decide not to have a sequence and a
'' ' trigger for the table.
'' ' =======================================================
'' Try
'' 'ds.Tables(tblIndex).Rows(rwIndex).Item(0) = astep
'' Catch
'' ' ignore the error corrected integer identity so don't randomize it
'' End Try
'' dr.Item("createdDate") = Now
'' dr.Item("changedDate") = Now
'' Case DataRowState.Modified
'' dr.Item("changedDate") = Now
'' End Select
'' Catch ex As Exception
'' conn.Close()
'' conn.Dispose()
'' Throw New ArgumentException(" Error: update_datasets " & ex.Message)
'' End Try
'' rwIndex += 1
''Next
selectstmt = "SELECT * From " & dt.TableName & " Where " & dt.Columns(0).ColumnName & " = " & 0
da = New OracleDataAdapter(selectstmt, m_conn)
Dim bldr As OracleCommandBuilder = New OracleCommandBuilder(da)
AddHandler da.RowUpdated, New Oracle.DataAccess.Client.OracleRowUpdatedEventHandler(AddressOf da_RowUpdated)
Dim insCmd As OracleCommand = Nothing
Try
insCmd = CType(bldr.GetInsertCommand(), OracleCommand)
Catch ex As Exception
Throw New Exception("")
End Try
insCmd.CommandText += " returning " + dt.Columns(0).ColumnName + " into :seqno"
insCmd.Parameters.Add(New OracleParameter("seqno", OracleDbType.Int16, _
4, ParameterDirection.Output, False, CType(0, System.Byte), CType(0, _
System.Byte), dt.Columns(0).ColumnName, DataRowVersion.Current, Nothing))
da.InsertCommand = insCmd
Try
' ===========================
da.Update(ds, dt.TableName)
' ===========================
Catch ex As Exception
Throw New ArgumentException(" Error: update_datasets_return " & ex.Message)
End Try
Next
m_conn.Close()
m_conn.Dispose()
Return ds
End Function
Friend Shared Sub da_RowUpdated(ByVal sender As Object, ByVal e As OracleRowUpdatedEventArgs)
If e.StatementType = StatementType.Insert Then
e.Row(0) = Int64.Parse(e.Command.Parameters("seqno").Value.ToString())
End If
End Sub
' ================================================================================
' Notes:
' =================== How To -- Sample section for PL/SQL ==================================
' myTrigger, myTable, mySequence, and myColumn are values you need to supply.
' Note: A trigger needs to be created for each table.
' A sequence needs to be created only once and referenced each time
' in the trigger(s). Or you could create a new sequence each time you
' create a trigger. Sort of a waste of effort.
' Explanation:
' myTrigger = The name you are giving this trigger.
' If a trigger with same name already
' exist, it will be overwritten.
' myTable = Table you want to add the sequence numbers to.
' mySequence = Sequence counter you created. Whatever name you called it.
' myColumn = The column to update with the sequence number.
' =================================================================================
' -- Run in PL/SQL or create at DB. --
' create or replace trigger myTrigger
' before insert on myTable for each row
' begin
' select mySequence.nextval into :new.myColumn from dual ;
' end;
' -- Run in PL/SQL or create at DB. --
' create sequence mySequence
' MINVALUE 1
' START WITH 1
' INCREMENT BY 1
' NOCACHE; can be set to CACHE but sequence may contain gaps.
' Explanation of CACHE from: http://www.techonthenet.com/oracle/sequences.php
' With respect to a sequence, the CACHE option specifies how many sequence
' values will be stored in memory for faster access. The downside of creating
' a sequence with a CACHE is that if a system failure occurs, all cached
' sequence values that have not be used, will be "lost". This results in
' a "gap" in the assigned sequence values. When the system comes back up,
' Oracle will CACHE new numbers from where it left off in the sequence,
' ignoring the so called "lost" sequence values.
' Note: To recover the lost sequence values, you can always execute an
' ALTER SEQUENCE command to reset the counter to the correct value.
' NOCACHE means that none of the sequence values are stored in memory.
' This option may sacrifice some performance, however, you should not encounter
' a gap in the assigned sequence values.
End Class
C#:
using System;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
public class OracleUpdater2
private static OracleConnection m_conn;
private static OracleDataAdapter da = new OracleDataAdapter();
private static OracleConnection conn = new OracleConnection();
public static DataTable load_it(string constr, string strqry, string tblName)
// =====================================================================
// constr = User Id=myUser;Password=myPass";Data Source=myDataSource
// strqry = Select * from something?
// tblName = The table name to fill.
// =====================================================================
conn = new OracleConnection(constr);
conn.Open();
da = new OracleDataAdapter(strqry, conn);
OracleCommandBuilder bldr = new OracleCommandBuilder(da);
DataTable dt = new DataTable(tblName);
da.Fill(dt);
conn.Dispose();
return dt;
public static DataSet update_datasets_return(string constr, DataSet ds)
//'ByRef ds As DataSet)
string selectstmt = null;
m_conn = new OracleConnection(constr);
try
m_conn.Open();
catch (Exception ex)
throw new ArgumentException(" Error: connection lost." + ex.Message);
foreach (DataTable dt in ds.Tables)
selectstmt = "SELECT * From " + dt.TableName + " Where " +
dt.Columns[0].ColumnName + " = " + 0;
da = new OracleDataAdapter(selectstmt, m_conn);
OracleCommandBuilder bldr = new OracleCommandBuilder(da);
da.RowUpdated += new
Oracle.DataAccess.Client.OracleRowUpdatedEventHandler(da_RowUpdated);
OracleCommand insCmd = null;
try
insCmd = (OracleCommand)(bldr.GetInsertCommand());
catch (Exception ex)
throw new Exception("" + ex.Message);
insCmd.CommandText += " returning " + dt.Columns[0].ColumnName + " into
:seqno";
insCmd.Parameters.Add(new OracleParameter("seqno", OracleDbType.Int16, 4,
ParameterDirection.Output, false, System.Convert.ToByte(0),
System.Convert.ToByte(0), dt.Columns[0].ColumnName, DataRowVersion.Current,
null));
da.InsertCommand = insCmd;
try
// ===========================
da.Update(ds, dt.TableName);
// ===========================
catch (Exception ex)
throw new ArgumentException(" Error: update_datasets_return " +
ex.Message);
m_conn.Close();
m_conn.Dispose();
return ds;
If you need a working program of how this works, let me know.

Oh my god, it is too long! You definitely check out types, casting and especially ODP.Net (it does everything for you)... etc. They can help you to simplify your code. I do not have enough time to copy paste it to Studio and understand and solve your issue, so I got title of your message as your main question.
In Oracle, you can create an autonumber field by using sequences object. This is really useful when you need to create a unique number to act as a primary key.
Basically you can create a sequence simply typing;
CREATE SEQUENCE MY_SEQUENCE;
now you have a sequence called "MY_SEQUENCE"... Then, I advice you select a number from sequence;
select MY_SEQUENCE.nextval from dual;
I said I advice actually kinda must, although it called sequence, I cannot be sequential. Do not even try to predict the value. You can be sure that it is unique number so you can use it.
Then insert you record and use that number part of your primary key. I think that's it. Have fun.

How can I forward a email without the extra info auto generated by Thunderbird ?

When I foward a emai, Thunderbird auto-generates lots of extra information that is not need to be seen by the person I am forwardind to the message.
How can I configure Thunderbird forward to clean all the extra info auto generated by Thunderbird ?
Best regards
HC

''Airmail [[#answer-708174|said]]''
<blockquote>
From the menu bar select View-Headers and set it to Normal instead of All.
The mail system generates all this info and not Thunderbird FYI.
</blockquote>
SOLVED ! :)
Thank you very much for your help :)
HC

Update Fund & Fund center data in auto generated PR during MRP RUN

Problem in the MRP auto generated PRs.
The normal PRs created manually have all relevant fields of fund center viz CO area ,commitment item,Funds center, fund.
But the problem is with respect to the Purchase Requisitions generated automatically during the MRP RUN.
How to include the fund centers in MRP generated PRs automatically in the creation stage itself instead of going into change mode using ME52n Transaction code and change it to include fund centers one by one for each line item.
We require this as we have hundreds of PRs generated every day.

Hi,
In order to fulfill this requirement, transaction FM_MRP_PR should be used.
Please also take a look to FM_MRP_PR on-line documentation :
The PRs generated from the MRP run are considered as planning documents
and do not have any impact on the budget. To encumber these PRs in the
corresponding settlement receivers, you have to execute this program for
the relevant PRs.
Best Regards,
Arminda Jack

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

How to auto-generate a "empno" field at run time in oracle forms 6i

Hello!
I have connected to a SCOTT schema. And i am using emp table. At run time mode when i press F8 then the data is displayed in the fields.
My task is to generate auto "empno" as soon as i run the form. Kindly do the needful.
Thanks in advance

Hi Francios,
I think with your solution our user only able to see the current information in the form.I donot think it will auto generate the empno.
Dear user,
I suggest what you can do is to create one sequence in your database and use it to generate automatic
empno.
In post query trigger try to implement the idea.
Suppose in the name of the sequence is empno_seq.
if emp.empno is null then
:emp.empno := empno_seq+1;
end if;
Try i hope it will work
Regards
Rajat

Capture auto generating seqs

Similar Messages

Maybe you are looking for