Capture Screen from Video Layer with MHP application

Hi MHP folks!
Does anybody know how to capture a image / frame from the video layer with a MHP application?
I am happy about every answer!
THX a lot
Bernhard

There's no standard way to do this in MHP.

Similar Messages

  • Is it possible to remove blemishes from video frames with photoshop cc?

    Is it possible to remove blemishes from video frames with photoshop cc?

    Again, show us reference screenshots and we will advise. Otherwise this could become an endless theoretical discussion. Depending on what you want to do you can import the video directly using Layer --> New Video Layer e.g. when covering up fied spots with a brush blob on a layer on top of the footage, but you may also need to create separate layers for each frame using the Frames to Layers script so you can paint on each of them individually. There's really too much we don't know and the possibilities are potentially infinite...
    Mylenium

  • Can't share screen or video chat with AIM

    I'm trying to set up screen sharing and video chat with other AIM 'buddies' but the little icons for both remain greyed out when I select the buddy if the buddy is an AIM account. I also have messages configured for my GMail account. When I click on a GMAIL 'buddy' those icons switch from grey to active. So it looks like I can start a screen sharing/video chat session with GMail but not AIM folks. Any thoughts on what could be the problem? I've already deleted all iChat related preferences from my ~/Library/Preferences folder.  This system was an upgrade from Lion which had had iMessages beta on it.
    Thoughts? Thanks,
    -Noah

    Hi,
    Video Chat requires that you have a enough Internet Speed.
    A minimum of 128kbps upload (normally the lower) is required.
    However this is the Apple declared minimum and  a real world figure of 256kbps is best.  (it is several times the fastest possible Dial up speed).
    As Screen Sharing in iChat is basically an Audio Chat + then you have to be able to Video Chat (Same min speed requirement) first.
    Screen Sharing also requires a random internet port that means using UPnP in your router or Modem to Open ports.
    If the icons at the Bottom of the Buddy List are greyed out go to the Video Menu.
    Check the Video Chat Enabled is ticked and the same for Screen Sharing.
    If they are then open the Connection Doctor from the same Menu and check Capabilities.  (report these)
    Having said that the Internet Speed you have and the Settings would effect both types of Buddy list.
    That leaves the type of Applications the Buddy is using.
    Jabber (In this case GoogleTalk ) Buddy lists will not video or Audio chat to people logged in via a Browser or the Google Talk App for PCs or other Non iChat/Messages  but Jabber able apps on PCs or Macs (it is only iChat or Messages the Buddy has to have).
    An AIM Buddy could be logged in via AIM Express (Access via a Browser)
    This would tend to have them Not show the Video or Audio iCons (green ones in the Buddy list) rather than "disable" the Buddy List icons.
    Having laid it all out with some suggestions I am now confused.
    Go to the General Section of the Messages Preferences an untick the item about gathering all Accounts into one list.
    This will create at least two Buddy Lists (Jabber/Google and AIM).
    The settings in the Video menu should effect both Buddy lists.
    If you toggle Off and On again the Video, Audio and Screen Sharing options does anything change ?
    The Messages Beta issue will not be a factor.
    10:32 PM      Friday; November 23, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • White Screen when "video" chatting with PC

    My friend is running AIM 5.9 on Windows XP and when I try to video chat with her, all she sees is a white screen, but still can hear me. I have rebooted my computer, and so has she. We used to not be able to connect at all, but she rebooted and now she can hear me.
    What should I do?

    Hi Brendon,
    What has she done to set up AIM on her end ?
    Has she enabled it though her XP firewall ?
    Has she enable the ports AIM needs in her modem ?
    8:38 PM Tuesday; December 19, 2006

  • How can I capture / download ( save to my PC) a JW PLayer Video that is being broadcast - to capture a steeaming video played with JWplayer?

    How can I capture / download ( save to my PC) a JW PLayer Video that is being broadcast - I wish to capture a streaming video that is being played with JWplayer?

    Hi there
    Likely you will need to capture using a different tool than Captivate. Then you might save in a format Captivate understands (such as FLV or SWF) then insert that into Captivate.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Capture Image from Video Using JMF

    Dears
    i want to extract image from video file at my file system , how i can do that using JMF or any other APIs
    my main target is to create thumbnails from video files uploaded by the customer
    thanks

    abo_habibah wrote:
    so if i will have java project run in background under aix machine , this code will work without any problem ?If AIX machine uses an X server, then you'll probably get a "headless exception" thrown...but if it's not X-server based, you should be fine.
    also what is the package for Time object Time object? I believe you mean "Timer", which you can certainly lookup yourself with the API:
    [http://java.sun.com/javase/6/docs/api/]
    +(it's java.util.Timer, but you should still learn to look it up yourself...)+

  • Protecting cracked ipad screen from further damage with protector

    Howdy.... I have an ipad 2. The screen recently developed a spider web-type crack. I honestly have no idea how it happened. I did not drop it. I've been on a number of plane trips recently and noticed it after checking into a hotel. It was in my cabin luggage. Possibly someone dumped something on it in the overhead bin, or it got tossed around??
    Anyway, it does still seem to function completely fine. Towards the edge of the screen on one side there is about 1 mm of depression/displacement of the sides of the fracture. Otherwise the cracks are non-displaced. I have no problem using it.
    I am in a country with no apple stores. I could submit to an authorized repair place and wait for it to be repaired. However, I am anticipating ipad 3 coming out soon and I am wondering about the option of simply not fixing the screen at all.
    I bought an ipad screen protector and put it on the screen under the theory that this might inhibit cracks from propagating further. Anyone have any insight or ideas about this? What happens when you use a cracked ipad screen over time? Does it inevitably get worse?
    I am wondering if I can just use it as-is with the screen protector until ipad 3 comes out. The cracks are actually hard to notice during actual use, with the screen on.

    The glass is laminated structure, the top layer is oleophobic plastic very thin, then there is the sensor and finally the glass. Same for ipad and iphone. See below.
    If it works, keep going. Since you plan to buy a new one anyway. A case of 'its broken, but no need to fix it' !

  • Capture still from video

    Please, how can I capture a still image from a video with Quick Time Pro?
    Thanks

    You don't even need the Pro upgrade to "borrow" an image from any QuickTime file format you can view in the free Player.
    Open the video and position the playhead to the frame you wish to use and Copy (File menu).
    Bonus tips:
    Resize the Player window and you'll get a larger, or smaller, file.
    The right/left arrow keys can "step through" playback so you get just the right image.
    Mac users can use the Get Info window to make a custom icon for that same QuickTime file.
    Open any image editing app and "paste" your copy to use it anywhere on your PC.

  • Capture image from video live streaming

    Hi everyone ^^ 
    I have a question in my attached vi, I am able to have a live streaming video from my build in PC camera and take a pic from it too, the problem is it runs perfectly for the first time but the mint I press the button the image froze >< , I can not have my video back even when the case structure is fasle. Hope someone can help me with that 
    thanks a lot ^^ 
    Solved!
    Go to Solution.
    Attachments:
    Image Aquairing 2.vi ‏53 KB

    Hi ReChan,
    -IMAQ Snap Configures, starts, acquires, and unconfigures a snap acquisition.
    -For IMAQ Grab you're configuring initally. So, whenever you click boolean-imaq snap captures image and unconfigures the IMAQ session.
    -When you try to grab again, it will throw an error because IMAQ session isn't configured.
    -The mechanical action of boolean you kept as switch when pressed-it'll stay high-which results asking user for saving an image. instead i changed it to latch.
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13
    Attachments:
    Image Aquairing 2.vi ‏53 KB

  • How can I Capture screen from command line

    When I start FME from command line it automatically capture
    from first camera
    But I want it start capture form screem automatically
    or I want to start 2 capture progress
    1 form camare
    2 form screen
    Thanks

    I don't print from the command line, so I don't know this off the top of my head. There are instructions for doing this in your CUPS documentation. Read Chapter 2 & 3 here:
    http://localhost:631/sum.html

  • Ssh to iMac from my PC with graphic applications

    How can I ssh to my iMac from my window PC?
    I am using SecureCRT + Xming to ssh to my iMac, but I could not open the graphic applications (e.g. xv) through ssh. (I can do it when ssh to a Linux machine though).
    Do I have to setup something in my iMac machine?
    Is there any window software (other than SecureCRT + Xming) that can help me to do that?
    Thanks.

    Generally speaking, you tunnel your X11 X-Windows session by starting the ssh session using the -X (capital X) or -Y (capital Y) ssh command line option. This establishes an X11 tunnel, and on the remote system associates your DISPLAY environment variable with the remote end of the ssh tunnel. Typically DISPLAY looks something like localhost:14.0
    I do not know how to tell your SecureCRT + Xming setup to export your X11 display server's DISPLAY environment to Mac OS X.
    I also assume you have an X11 display server running on your Windows PC.
    Note: Terminal, Unix, command line (such as ssh) questions are best asked in the Mac OS X Technologies > Unix Forum
    <http://discussions.apple.com/forum.jspa?forumID=735>

  • Capture screen as video clip

    How do I capture what I am seeing on my screen as a video clip?

    Hi! Look at SnapzPro. Tom

  • Trying to see screen from 13 macbook with hdmi on Tv

    I keep get the error "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer". Is there anyway to change this? Hooking up macbook with HDMI adapter and cord.

    I have this issue too, how did you resolve this?

  • Model gpib-usb-hs serial no 12888da cannot capture screen from agilent 8757d network analyser

    I wish to know how can I siolve the captioned issue.

    You should post to the instrument control board unless the software you are using is Measure - an add-on for Excel.
    Add some details like the programming language you are using and the commands that you don't think work. It is a command and programming issue and not an issue with the controller.

  • Capture image from video

    There is a frame of video I have in my timeline I'd like to save as an image file. How do I do that?

    Park the play head on the frame you want to use. Select File>Export>Using QuickTime Conversion and choose Still Image as the format.

Maybe you are looking for