Capturing images from camera and uploading to sharepoint library automatically.

Hello Everyone,
My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
Please suggest me.
Thanks,
Rajesh

Hi,
From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
Create and Deploy Custom Timer Job Definition in SharePoint Programatically
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
How to: Upload a File to a SharePoint Site from a Local Folder
https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • Capture images from Camera directly at high resolution

    Hello Users,
    I want to capture images from Camera directly at high
    resolution. The problem is that although I am able to capture
    images from a Video Object, but the images are small because the
    Video size is only 160x120. So if I am able to capture directly
    from Camera, I am sure to get a higher resolution images at which
    the camera is capturing.
    Any help in this matter will be of great help

    Hello Users,
    I want to capture images from Camera directly at high
    resolution. The problem is that although I am able to capture
    images from a Video Object, but the images are small because the
    Video size is only 160x120. So if I am able to capture directly
    from Camera, I am sure to get a higher resolution images at which
    the camera is capturing.
    Any help in this matter will be of great help

  • Capture Image from Screen and Yosemite Mail

    Composing a new mail message in Yosemite. If use the pull-down option to Capture Image from Screen and place the image in the message body (HTML), the image is not being sent with the message. A broken image icon is sent instead.
    If, on the other hand, I use the paperclip to add an image file to the message body all is well. Same if I copy and paste an image into the message body.
    In both those cases where it works, I also get the Markup pulldown to edit the image. In the Capture Image from Screen case where it doesn't work I also don't get the Markup pulldown menu and options.
    Anyone else seeing this? Is it a known bug with Yosemite or just on my side?

    I'm actually experiencing the same thing, i asked my officemate and he is also getting the same error when using capture on mac mail

  • IPhoto preferences - delete images from camera after upload???

    Is there a preference setting in iPhoto 6 to delete images from my camera's card after upload? Can't find it...

    Hi, buzzworms. Yes, it's there — but don't use it.
    Too many users of iPhoto have selected that option and then had an import go awry for some reason, only to discover afterward that even though the pictures weren't successfully imported, the card was erased and the pictures were gone.
    Much better to leave that option deselected, so the contents of your card aren't changed by your Mac whether or not they've been imported successfully. It's free insurance against the loss of your pictures. Erasing the card in your camera only takes a moment after you've confirmed that the pictures are safely stored in iPhoto's library.
    Message was edited by: eww

  • Issue with exporting the image from camera and scanner

    Hello,
    When  importing JPG digital photos from my Conica Minolta SLR digital camera,  the file size is typically 3-4 megabytes. If importing
    and then  exporting the file out of Lightroom 2.6, the size of the file is not  changed (at least not very much).
    However, when scanning 35 mm color negative films using a  Plustek OpticFilm 7600i with SilverFast-SE the JPG file has a size of  abou
    t 5 megabytes (generated by SilverFast-SE). If I take this file  and import it to Lightroom and then export it out again, the size in
    crements to about 12 megabytes. What could be the reason for this?
    Browser:  Microsoft IE
    Operating System: Windows 7
    Scanner / driver  version: SilverFast-SE v6.6.0r6
    Has it ever worked? If so, what's  changed? (provide comments in description field): Not Applicable
    Same results with different file?: Not Applicable
    Same results with  different computer?: Not Applicable
    Recent System Hardware or  Software change?: Not Applicable
    Regards
    JPSingh

    It is the compression settings on export that will define the size of an exported image from LR, the amount of compression applied will produce differing file sizes according to the type of image, the amount of sharpening and many other factors.. To compare actual file sizes (rather than compressed sizes) see what it says when in Lightroom or when open in Photoshop. Two images with the same pixel dimension can have very different file sizes when compressed. When open, in PS for instance, the file size will be the same for images of the same pixel dimensions and bit depth. .

  • How do I tell iphoto NOT to load ALL images from camea and iphone, only new images?

    I've bee using my MacBook Pro, iphoto and Nikon for many years. I travel alot and take many pictures, and like to keep them on the memory cards as an extra backup. All was going great on a recent trip, until one day, suddenly, when I plug camera into computer, iphoto opens (as usual) but it starts downloading ALL of the old images on the memory card instead of just the ones that have not already been imported! It takes forever when you are using a 16GB card!! Is this due to some update I installed? How do I tell iphoto not to do this?! I only want to see images not yet imported, as it used to be. I am using OS X 10.6.8 and iphoto '09 - 8.1.2  And, this same thing is happening with my iphone, and my other camera.

    iPhoto does read all images (how else can it know if it has already imported them or not) and then gives your oppertunity to import new, all or selected
    Yes it does take a bit to get all images and see what needs to be imported - I use 32 GB cards - and the other issue is that if you delete impoprted photos next time you use the card the deleted ones will be in the new list so you have to select the rest and import selected - I've found no solution to this
    LN

  • Grabing images from camera & Apply OCR To that image

    Hi,
    I m developing a sample application on OCR. At last visit i m posting the same question.But no one can answer me.
    Here i Create a Vi for grabbing images from camera. The Images are grab & save to the desired folder.But the OCR is not working on that snap image.
    I m  modified some Sample NI VI's for capturing the images & for OCR.
    I m new for labview. I cant understand where is the problem in the VI.
    i also create a character set file for reading the characters using OCR Train
    so please help me to find the solution.
    Attachments:
    Character reading.vi ‏91 KB

    HI.
    Let me give some suggestions regarding your code, (See pictures), and attached an example that you could serve.
    Regards.
    Jonathan Cruz
    CHALLENGER
    K U D O S __ B I E N V E N I D O S
    Attachments:
    Camara OCR.vi ‏42 KB
    11.JPG ‏77 KB
    22.JPG ‏17 KB

  • How receive image from camera with PCI-bus

    Hello all
    Please help
    me.
    I have LV 7.1.1.
    I wont
    watch two and more images from cameras at the same time.
    I have capture
    card (PCI-bus) with 4 video-input.
    What kind
    of data must be transfered from this capture card  to LV?
     With respect
    Aleksandr.

    Hello Aleksandr
    please provide more information, what type of video card do you have?
    Have you configure the card so you can watch an image with MAX?
    I suppose the card has the ability to capture more than one image at a time is that true?, however most of the cards that I know of, have several inputs but you can only display one image at a time, you can swith between them and capture and image from another input, to capture more than one unit at a time you would need to open/close sessions with the instrument/card such that you are switching from one input to another
    vicente

  • Problem with capture image from wc

    hi all, i want to capture image from my webcam and play it, but it's not work
    please help me, here's code
    public class Demo extends JFrame {
          * @param args
         public static void main(String[] args) {
              // TODO Auto-generated method stub
              Demo demo = new Demo();
         public Demo() {
              super();
              int a=30;
              final JPanel panel = new JPanel();
              getContentPane().add(panel, BorderLayout.CENTER);
              setVisible(true);
              DataSource dataSource = null;
              PushBufferStream pbs;
              Vector deviceList = CaptureDeviceManager.getDeviceList(new VideoFormat(null));
              CaptureDeviceInfo deviceInfo=null;boolean VideoFormatMatch=false;
              for(int i=0;i<deviceList.size();i++) {
              // search for video device
              deviceInfo = (CaptureDeviceInfo)deviceList.elementAt(i);
              if(deviceInfo.getName().indexOf("vfw:/")<0)continue;
              VideoFormat videoFormat=new VideoFormat("YUV");
              System.out.println("Format: "+ videoFormat.toString());
              Dimension size= videoFormat.getSize();
              panel.setSize(size.width,size.height);
              MediaLocator loc = deviceInfo.getLocator();
              try {
                   dataSource = (DataSource) Manager.createDataSource(loc);
                   // dataSource=Manager.createCloneableDataSource(dataSource);
                   } catch(Exception e){}
                   Thread.yield();
                   try {
                        pbs=(PushBufferStream) dataSource.getStreams()[0];
                        ((com.sun.media.protocol.vfw.VFWSourceStream)pbs).DEBUG=true;
                        } catch(Exception e){}
                        Thread.yield();
                        try{dataSource.start();}catch(Exception e){System.out.println("Exception dataSource.start() "+e);}
                        Thread.yield();
                        try{Thread.sleep(1000);}catch(Exception e){} // to let camera settle ahead of processing
    }

    iTool wrote:
    hi all, i want to capture image from my webcam and play it, but it's not workThat's a very descriptive error message, "it's not work". Everyone on the board will certainly be able to help you out with that.
    The first error I see is that you're using the CaptureDeviceManager in an applet. If T.B.M pops in here, he can tell you why that's going to be a CF 99% of the time.
    The other error I see is that your code looks absolutely nothing like any working JMF webcam capture code I've personally ever seen.
    Lastly, the big one, even if you were somehow capturing video magically, you're not even trying to display it...so I'm not entirely sure why you expect to see anything with the code you just posted.
    [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.html]
    Your best bet would be starting over and using the example code from the page linked above.

  • How do you Automatically Copy Images From Camera?

    I would like to create an AppleScript that will run when I plug in my digital camera. Here is what I cannot figure out.
    How to make it run when the camera is plugged in.
    How tow to copy images from camera to a designated folder.
    Thanks!

    You can do all you requested - without 'AppleScript'.
    01. Connect your camera launch 'Image Capture' ('/Applications/' folder - if it does not automatically launch.
    02. Select the 'Image Capture, Preferences...' menu item.
    03. Click on the 'General' tab.
    04. From the 'Camera:' 'When a camera is connected, open:' pop up menu - select the 'Image Capture.app' menu item.
    05. From the 'Devices' menu select your camera from the menu items list. A window will appear with the title of your camera.
    06. From the 'Download To:' pop up menu select where to save the camera's photographs. You can select any folder anywhere on your hard disk drive(s).
    07. Click the 'Options...' button, and from the drop down sheet click on the 'Connection Options' 'Automatically download all items' check box - to add a check mark. There are other options you may have be interested in.
    08. Click on the 'OK' button.
    09. If you want to download the photographs now - click on the window's 'Download All' button. Or, to test the above setting changes - quit 'Image Capture' and disconnect your camera. Then reconnect the camera - and watch the above setting changes take effect.
    Note:
    The above automatic action can also happen if the storage device of the camera were inserted into a USB digital camera card reader. So long as apply the Steps above, and you select the USB digital camera card reader from the 'Devices' menu's menu item list in Step 05 above.
    'Image Capture' is not scriptable; but, may be control-able via 'tell application "System Events" to tell process "Image Capture" ....
    When a camera is connect to the Mac, the storage card of the camera is mounted onto the 'Desktop' and also listed, as an alias, in the (invisible) '/Volumes/' folder.
    Now that you know the name of the storage card ... you can create a 'Folder Action Script' (an example is presented below) and save it into the '/Library/Script/Folder Action Scripts/' folder,
    Open the '/Volumes./' folder (in 'Finder' via 'Go, Go to Folder' - enter '/Volumes/').
    Perform a right button click ('<control> - click, for single button users) on the 'Volumes' folder's window, and select 'Enable Folder Actions' (if not already).
    Rpeat the right button click (<control> click) and select 'Attach a Folder Action...' - selecting your script ('Volumes_FAS.scpt' as shown below).
    Below is a 'Folder Action Script' example - where you will have to substitute 'NO NAME' with the name of your digital camera's storage card's name.
    -- --- Save code as a script with the name 'Volumes_FAS.scpt' --- --
    on adding folder items to this_folder after receiving added_items
    set myStorageCard to "NO NAME" -- The name of my 1 GB stroage card. The name of your card may differ.
    repeat with i in added_items
    tell application "Finder" to set tName to (name of i) as string -- Obtain name of mounted storage card.
    if (tName is equal to myStorageCard) then my handle_card(i) -- If my storage card, continue processing.
    end repeat
    end adding folder items to
    on handlecard(localVolume)
    set folder_Path to ((path to desktop folder from user domain) as string) -- Path to 'Desktop' folder.
    set download_Folder to "NO_NAME Photographs" -- Name of folder to store storage card's items (files and folders).
    -- create download_Folder, if it does not exists.
    tell application "Finder" to if (not (exists folder (folder_Path & download_Folder))) then make new folder at (folder_Path as alias) with properties {name:download_Folder}
    -- Duplicate all the items (files and folders) of the storage device to the '~/Desktop/NO_NAME Photographs' folder.
    tell application "Finder" to duplicate items of local_Volume to (folder_Path & download_Folder) as alias
    end handle_card
    -- --- End of code --- --
    Review 'Finder's dictionary (in 'Script Editor') for the various ways to incorporate 'duplicate ...'.
      Mac OS X (10.4.4)  

  • When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

    When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

    Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
    If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
    Also what is the version of ACR in the title bar?
    Gene
    Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

  • Capturing image from Webcam

    Hi,
    Is there any way in which Java can be used to capture images from the webcam and save it to a predefined image file name?
    Any examples out there?
    Alternatively, I could have the application written in other languages, but still, I would need my main Java app to launch this external app.
    Thanks alot.

    Hi,
    Is there any way in which Java can be used to capture
    images from the webcam and save it to a predefined
    image file name?
    Any examples out there?
    Alternatively, I could have the application written in
    other languages, but still, I would need my main Java
    app to launch this external app.
    Thanks alot.Yes, the ExampleSave from the JavaTwain package at http://www.gnome.sk does this job :)
    If you just want to see how Java Twain works with your webcam (works with a scanner too):
    - java (1.2 or higher for Windows, 1.3 or higher for Mac OS X) has to be installed on your computer
    - a scanner or camera has to be installed on your computer
    - download the trial package from http://www.gnome.sk
    - unzipp it
    - go to the examples directory of the unzipped package
    - in Windows: doubleclick the runExampleShow.bat
    - in MacOS:
        - open the Terminal window
        - change the working directory to the examples
        - run .sh file (type ExampleShow.sh or sh ExampleShow.sh)
    This will pop up the Twain Source Selection user interface. There, all your scanners and cameras which do have a twain driver should be listed. (About 90% of scanners and cameras on the market do have a twain driver for Windows, only a few do have a twain driver for MacOS.) Select one of them. The user interface of the selected scanner (camera) will appear. Confirm the scanning (you can set the scanning parameters first). The scanned image will be displayed in a separate window. To end the application, close that window.
    Running different examples, you can test scanning with hidden UI, saving the scanned image, using ADF, ...
    If there is any problem, do not hesitate to inquire about it at the technical support, email: [email protected] . I am the member of the staff :)
    Erika Kupkova

  • Capture image from isight

    What is the best way to capture images from iSight using Applescript ?

    erritikamathur wrote:
    What is the best way to capture images from iSight using Applescript
    (1) Depending on what you want to do, you may be able to use your "Automator" application to make your scripts instead (Automator calls them "workflows".)
    When you launch Automator, you can immediately select the "Photos & Images" as a starting point to see if it will meet your needs by selecting "my Computer's Camera" in the "Get content from:" choices bar there.
    For more info on Automator, start with Mac 101: Automator and then launch Automator on your Mac and use its Automator > Help as needed.
    (2) If you really need to use AppleScript, you need to understand that you script applications (such as iChat), not devices (like iSight.) Therefore, first decide what you want to do with your iSight. Click -> here to see a list of some applications that can operate your iSight.
    Once you have decided what you want to do, launch your Mac's AppleScript Script Editor.
    Next, open Script Editor's Library window to see a list of Apple apps that are scriptable. Those that can control iSight include iChat, iMovie, and iPhoto. Double-click on one of the apps of interest to see the dictionary of functions that can be scripted in that application. Reviewing the library for any app will help you determine whether the functions you want to control can be scripted in that app. If not, you need to find another app that can control that function, develop an alternate process flow that can be scripted, or look for a way to accomplish your task other than with AppleScript.
    Some third party apps may also be scriptable. See the documentation or support info for particulars directly from the developers of those apps.
    More help is available from a variety of sources. For instance, you can check your Mac's Help on specific applications to see if they contain info on automating them. One specific example is iChat > Help, which gives a good start on your iChat study.
    Unless you already know how to use AppleScript, you may also need to do some more general study or perhaps take advantage of the Apple training series book available from the Apple Store.
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • HT4101 I discovered a fatal flaw in the iPad procedure for downloading images from camera to iPad: after selecting the images to be downloaded, an accidental touch of the "delete" button, wipes all selected images from the camera, with no warning?

    After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
    Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
    Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?

    No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
    I've loaded thousands of photos on my IPad and never have had that problem.
    Don't blame a moment of carelessness on your device.
    If you want to make such a suggestion to Apple use http://apple.com/feedback

  • Camera software not opening to transfer images from camera to computer. What to do?

    My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
    Thank you!

    Hi BLG,
    If you haven't already done so, please update your software for Windows 7.  Here's how.
    Just click here to access the software updates for your camera.  Once there, just enter your operating system, then the version of the operating system.  Now click on "Software" to show the software updates.
    Click on "ZoomBrowser EX 6.9.0a Updater".  Installation instructions are on the next page.  Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
    After accepting the required disclaimer, please download the program update to your desktop.
    After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
    Since you've installed an older version of software, you may now double-click on the program update to install it.  If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
    If you've already updated the software for Windows 7, please contact us for assistance.  Click here for contact options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for

  • How do I fix my question mark key, it shows up as É

    How do I fix my question mark key, it shows up as É

  • Iphone volume too low

    When I am talking on the iphone, the volume is too low.  This happened about a week ago and I can't seem to increase the volume. I tried the standard things like raising the volume on the buttons.  I also updated the phone to the latest version, and

  • Is GeForce 2 MX the same as nVidia GeForce card?

    Hi... I want to play a game on my eMac and was wondering if GeForce 2 MX is the same as nVidia GeForce card. Please help!

  • How do I remove iTunes credit?

    I bought some US iTunes credit a few years back when I was visiting the USA and now have something like $0.38 left. I want to purchase extra iCloud storage but I need to change my store to the NZ store to do so. iTunes won't let me change store while

  • SCM , APO and Livecache administration

    Hi SAP Guru's Can any one guide me what is role and responsibilities of SCM and APO and Live cache administration as part of Basis. I will be great help if any one can guide me in SCM and APO and LIVE cache administration. Waiting for Reply Farooqui