Cardon credit mapping in SAP

Hello Mates,
Has anyone done carbon credit mapping in SAP?
Could I be provided some information on carbon credit in power generation?
Look forward.
Thanks,
Akash

Hello Akash
There are two aspects of carbon demand - i) one required for Kyoto protocol ii) Getting voluntary carbon credits for CSR.
For meetign Kyoto Protocol - SAP offers jointly with TechniData the solution Environmental Compliance - which is used to collect and aggregate environmental measurements to establish the environmental footprint of a plant as a whole for example Power Generation.
For Carbon Foot Print in Supply Chain - SAP is working on a product called Green 2.0 which can give you environmental footprint  ie.  the footprint caused by an enterprise and the one  caused by the supply chain.
As far as your post is concerned i.e., for getting carbon demand for Power Plant - as a whole I suggest using SAP Environmental Compliance to map the process, to calculate the material consumption and calculation of emissions based on material consumption data and finally creating reports for GHG reporting.
Thanks and Regards
Jayakumar

Similar Messages

  • Letter of Credit mapping in SAP R/3

    Hi all,
    Scenario is:
    Import PO is raised to a vendor
    Based on the PO Letter of Credit is issued to the vendor for partial quantity.
    Based on the Letter of Credit, the vendor will supply the goods for which the L/C is opened.
    Then the Customs duty is paid and GR is done.
    How to map this scenario in SAP?  How to map the L/C in SAP.  How to create link between L/C, PO, GR & customs duty.
    Please give your inputs.
    Regards,
    Velumani

    Hi,
    After the PO has been created in SAP, from the finance side, they will post LC the functionality is similar to bill of exchange or as a noted item. While posting the transaction, in the reference field PO number will be maintained.
    Once the Goods are received at port.
    Customs duties has to be paid, for this you have to post an invoice through tcode: MIRO for the customs clearing agent with reference to your PO(For customs duties you have to maintain appropriate condition types in PO and against these condition types, custom clearing agents number(vendor number) has to be maintained. All these condition types are to be created with condition category 'delivery costs').
    For imports PO -- GR based-IV should not be checked becoz before receiving the goods you have to clear the custom duties.
    Then once the goods are received you will post the GR and the you will post the invoice for the material vendor.
    Then from the finance side, they will clear, whenever they post the clearing transaction to the vendor, LC realted transaction gets reversed automatically. Bank account will be -ve and your vendor account will be +ve.
    Note: Tracking of LC has to be done manually as the functionality is not complete in SAP.
    Hope this clarifies.
    Thanks,
    Viswanath

  • How to Map in SAP      ?

    Hi
    My client is Automobile industry.In the presales process my company delivers the goods to the dealer.On transit the goods are damaged.Instead of returning the goods the dealer him self repairs the goods and sends the credit memo to the company.The company will send the engineer for inspection and give the clearance certificate for the dealer.With reference to this we have to create the credit the customer.
    How to Map it SAP....?
    Plz send me the reply
    Regard's
    Prasad.

    Dear Prasad,
    As you r not taking d goodS back (or dealer is not sending them back) thus it's not a case of a Returns. Also there is no issue with d invoice either thus even Invoice Corrrection Request will not b generated.
    Thus it's a simple case of creating a Credit Memo Request for the required amount i.e the amount claimed 2 b spent by d dealer. This will obviously have a block which can b removed by d engineer who went for inspection (or some1else depending on d working of d organisation). Once the billing block is removed the dealer can b issued a Credit Memo in d usual way.
    Hope it answers ur query.
    regards
    PARAM

  • Letter of Credit Facility in SAP

    Dear All
    My client has a requirement of mapping the Letter of Credit facility in SAP. Their reqmt is that based on the project or contract they will get a LC availability, then after using the LC , they need a report to show, how much is the available facility, used LC and the balance per bank. I hope this can be done in treasury Mgmt. Plz let me know the config aswel for this and the difficulty in on config this.
    Regards
    Rajaram

    Hi Rajaram,
    There is no default product type for LC in TRM. ALways you can map the functionality to available product categories in Money Market area under Product Category - 550 or so and can have a integration with Facility product where you can monitor the available/used fund status.
    You need to configure both Product types in Money Market area of TRM.
    Regards
    Prasad AV

  • LC & Advance Licence in Import procurment - mapping to SAP

    Hi experts
    How Letter of credit during import procurement & Advace license against imports will be mapped in SAP.
    Rgds
    kcr

    This is mapped in SD foreign trade scenario only, as this is the most important use, the customer wants to make sure that he does not ship materials that he does not get paid for.
    On purchasing (vendor) side , there is nothing comparable.
    If you dont use contracts for that material in your scenario, then you can create one to cover the LC as a workaround. So you as a vendor will always know how much of this LC is already used.

  • How to create a map in SAP BI???

    Dear SAP BI Experts,
    I have a difficulties to make a map in BI and missed the steps procedure how to create a map.  I have an ESRI CD Map and Arc VIew application.  What is the first step if i want to create a map and is there any procedures or manuals from the beginning "how to create a map in SAP BI" ???
    So sorry for stupid question!!!
    Thank you very much for your time and help.
    Best Regards,
    Rudy (SAP BI Team)

    Hi Nirmansyah,
    Please check the below link.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/step-by-step%20procedure%20for%20creating%20customized%20bex%20maps.pdf
    Hope this helps.
    Veerendra.

  • RuntimeException in Message-Mapping (com.sap.aii.utilxi.misc.api.BaseRunti)

    HI,
    We are facing a very strange problem , during runtime we are facing the below mapping problem ,
    <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
    <SAP:P1>com/sap/xi/tf/_MM_FILE_TO_IDOC_P~</S P:P1>
    <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
    <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
    But when we have downloaded the XML from SXMB_MONI and tested the mapping it works fine , only in the run time we are facing this problem , funny part is the same scenario worked fine yester day itself (end-to-end).
    <b>Note</b>: <b>Chche is uptodate.
             Mapped all mandatory fields</b>
    Regards,
    Vijaya

    Hi
    please chech whether the data in the input file is according to the format or not.
    for this you go to sxmb_moni,take the input payload from the moni and test with that payload and you will come to lnow where is the error.
    if you still have the problem please relly me back
    Thanks
    Rinku

  • How to create interactive map in SAP Visual Business using SAP UI5 SDK

    Hi,
    Please tell me,
    How to create interactive map in SAP Visual Business using SAP UI5 SDK.
    Is it possible to create interactive map using VB Control in SAP UI5 SDK..?
    if possible please any one let me know.

    Hi folks, one question:
    We have our development close moved and now it is earlier than originally planned. 
    That means that we maybe can't finish our convenient API and you have to wait till we will release it - early 2015 is planned.
    But there is another option:
    Currently we have a API based on json. The developer has to create json and  to transfer it to the Visual Business control.
    This interface is more used as a low level API and we are developing on top the more convenient one. So all the features are the same.
    It will stay stable & compatible in the future and you can build on it.
    Do you want to use this interface?  
    Then I will publish the documentation.
    Let me know.
    Thanks

  • Letter of Credit Process in SAP

    Hi Guru's
    Can any one send me or explain me  the letter of credit process in SAP or sales cycle?
    please send step by step configuration or documentation on the above process.
    my mail id is [email protected]
    Suitable points will be rewarded.
    thanking you in advance for your kind help.
    Thanks n Regards
    Toshniwal

    Hi,
    Please find the Letter of credit details
    The configuration is as follows - OVFD, Define and assign payment guarantee, OBYN,OBYH, and OBYK. It is properly working.
    I made all the required transaction VX11N, VXA2, F-36, F-34, F-20
    Letter of Credit: A letter issued by a bank to obtain payment for goods. When a letter of credit is confirmed, the advising bank guarantees payment only if all stipulations in the letter of credit are conformed to exactly.
    1.The importer first request a quote for merchandise. This may or may not include transportation and insurance costs.
    2.The importer prepares a purchase order based on the offer received from the exporter.
    3.The exporter creates a proforma invoice and sends it to importer.
    4.The importer opens a letter of credit with the opening bank in the country of import.
    5.The opening bank sends the letter of credit to the advising bank in the exporters country.
    6.The advising bank advises the exporter that a letter of credit has been opened in his favor.
    7.The exporter ships the merchandise in accordance with the terms stipulated in the LOC.
    8.The exporter gives the documents proving that the shipment was made in conformance with the LOC to the advising bank.
    9.The advising bank pays the exporter based on the documents received.
    10.The advising bank transfers the documents to the opening bank and receives payment.
    11.The opening bank gives the document to the importer.
    12.The importer calculates the duty rates, file the declaration with customs and pays the customs duties within the time frame required by law.
    Hope this will be useful
    Reward points if helpful to you.
    Bye
    Anil

  • SAP:Code area="MAPPING" EXCEPTION_DURING_EXECUTE /SAP:Code

    Hi Experts.
    I'm tryin to make a JDBC Synchronous escenario, i want to UPDATE data from table in DB2 AS400, and the JDBC Update instruction returns the total of the register updated.
    All the configuration It's ready, but when I send the Update instruction, the UPDATE the information in the AS400 DB2 table, but the return message send me the next error:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_DAT_RES_</SAP:P1>
      <SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
      <SAP:P3>on: Cannot create target element /ns0:MT_DAT_RES_0</SAP:P3>
      <SAP:P4>2. Values missing in queue context. Target XSD re~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DAT_RES_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_DAT_RES_02. Values missing in queue context. Target XSD re~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anyone telll me about it?
    Thanks.
    Kenneth

    Hi Rao,
    Go to sxmb_moni and open your response mapping and take the payload and test your mapping. It seems the value you are mapping to /ns0:MT_DAT_RES_02 is not there. Can you please check that. You need to make sure step 4 in this blog:
    /people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
    Your response always comes up with _response and your message type should be like that only.  Also can you give your response mapping payload and the response message type here so that somebody can help you out if this didn't resolve your issue.
    Regards,
    ---Satish

  • Error in SXMB_MONI: SAP:Code area="MAPPING" EXCEPTION_DURING_EXECUTE /SAP:C

    Hi All
    When the Idoc is sent from ECC to XI after checking the message in the SXMB_MONI I get an error saying:
    <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
    What is this error and how should I go about resolving it?

    Hi,
      The most probable reason is that your idoc has failed in the mapping step.
    Take the xml payload of your message from SXMB_MONI and paste it the test tab of your Message Mapping.
    Then you can run the mapping in the test tab of the message mapping, which will point you to the exact reason for the mapping failure.
    Regards,
    Ravi Kanth Talagana

  • Runtime exception occurred during application mapping in SAP PI

    Hi Team,
    Please help me regarding this issue is very urgent:
    Runtime Error in configuration part:
    Here i test the XML message in Receiver Determintion:
    Below i am getting error:
    Runtime exception occurred during application mapping com/sap/xi/tf/_MaterialStockUpdate_Multi_AllPlant~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:The processing instruction target matching "[xX][mM][lL]" is not allowed
    SXMB_MONI:
    I am getting below error:
    Runtime exception occurred during application mapping

    Hi,
    Actually my problem is what i am getting,I am trying to test the data in runtime workbench and configuration part copied from inbound payload XML structure .
    I already sent the screenshots of above errors,
    Configuartion:
    Runtime workbench:
    This the error i am getting below in "Runtime Workbench"
    Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=MHEPL_Sandbox_100;TS=;AN=MaterialStockUpdate_Multi_AllPlants_N;ANS=http://www.manipalhospitals.com/his/mm; in the current context [Unknown].

  • What is Multi-mapping in SAP+XI and when is it used?

    Hi SDN,
    Can you please tell me what exactly is a multi-mapping in SAP+XI  and when is it used with an example.
    Regards,
    Aniruddha Bhattacharya

    Hi Aniruddha,
      Multi mappings can be used in ccBPM which is used to map abstract interfaces. Development is the same as Message Mappings.
    n:1 Transformation
    Bundles multiple messages into one message, for example, individual purchase order items into one purchase order.
    1:n Transformation
    Splits a message into multiple messages, for example, a purchase order into the individual purchase order items.(its possible without BPM)
    n:m Transformation
    Converts a message into another message, for example, a message that is defined by interface A is converted to message that is defined by interface B.
    Multi-Mappings reference multiple message structures:-
    a) All source message structures are combined into 1 source structure.
    b) All target message structures are combined into 1 target structure.
    Therefore, there is only one source structure mapped to one target.
    With BPM:
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    Without BPM:
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Also go through this thread...you will find lots of link which are helpfull...
    Multi Mapping
    Regds,
    Pinangshuk.

  • Kindly advise on new business process to map to SAP

    Hello All,
    I have one business process and I could not able to map to SAP.
    Please help me out.
    I have two company codes and one company code does the export business and other one supplies some parts to exports company code.
    Please find the scenario details in below.
    Company code 1000                 Company Code 2000 (Exports)
    Plant 1000                               Plant 2000
    X is the final product which is assembled with below parts (BOM)
    (Part A,Part B,Part C,Part D)
    Business Process:
    1. Plant 2000 places an order to Plant 1000 for final product "X".(It is the combination of Parts A,B,C,and D)
    2. Plant 2000 supplies Part E and Part F to plant 1000 without billing as RGP (Returnable goods packing).
    3. Plant 1000 receives parts E and F from Plant 2000
    4. Plant 1000 packs all the parts in one cart (ABCDE+F) and issues the final product "X" and part E and part F to Plant 2000
    5. Plant 2000 receives the final product X and part E and part F and as soon as GR done Part E and Part F should get consumed automatically in Plant 2000
    6. Plant 1000 sends the invoice for the Parts A,B,C and D and for service also.
    7. Plant 2000 pays invoice amount to plant 1000
    8. Plant 1000 receives the payment from plant 2000
    Please suggest me the suitable process in SAP and let me know if you need further explanation.
    << Moderator message - Please do not offer points >>
    Regards,
    Nag
    Edited by: Rob Burbank on Nov 19, 2010 4:59 PM

    Hi,
    For the above process you can map with Sub con process
    Step1 ) Create BOM in plant 2000 under cocd 2000  as End product /Header Material(X) and Component/child material as E and F
    Step 2) Create Sub con PO in plant 2000 under cocd 2000 with Vendor as Plant 1000 under co cd 1000
    Step 3) Transfer Component/child material E and F to Vendor as Plant 1000 under co cd 1000 using 541 Movt type.
    Steps 4) In Plant 1000 under co cd 1000 maintain material E and F as Non Valuated only Qty update.
    Step 5) Receipt the Component/child material E and F using Movt type 501 to update stock.
    Step 6) Create BOM IN Plant 2000 under co cd 2000 as End product/ Header material as X and Component/child material as A, B, C , D,  E & F.
    Step 7) Create sales order in Plant 1000 under co cd 1000 with customer as plant 2000 under cocd 2000
    Step 8) MRP run if require to plan the material A, B, C & D.
    Step 9) Procure the material A, B, C & D if stock less.
    Step 10) Create Production order/ Process order for Material X.
    Step 11) Confirm production order and receipt the End material (X) AGAINST Production order.
    Step 12) Crete out bond delivery VL01N for Material X and Goods issue (VL02N)
    Step 13) Billing VF01
    Step 14) MIGO goods receipt in  Plant 2000 under co cd 2000 against Sub on PO here Material E & F will consumes upon GR and end/ Header Material X will updated Stock.
    Step 15) MIRO to settle Vendor Account. Hope this will helps you.

  • Usage of Credit Cards in Sap

    Hi,
    Can someone please explain the process of the usage of credit cards in Sap and how is it used with t codes. Also please explain what documents i need to create for the credit card process.Good anwers would be rewarded with points.
    Regards
    Atul Keshav

    The process in SAP as per credit card usage starts from the interface you have to built with the card service provider/Bank, as they are the one's who are providing that facility so to built that abapers will be required as per SD point of view you have to configure the settings in SPRO --> Sales & Distribution --> Billing -->Payment Cards , then define & assign accordingly.
    In the SO, you can see entering the payment card option.
    Rewards if it helps
    Regards,
    N

Maybe you are looking for