Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE

Dear all,
i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
Thanks in advance,
Naren

>
naren wrote:
> Dear all,
> i have a concern,i have to implement a user exit in tcode j1iin in the FM J_1I7_USEREXIT_CALC_EXC_BASE .now when i try to bring in change mode it says
>
> Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE first. No changes possible
> ...how do i do the modification comparision. i have checked with SPAU and SE95 tcodes but iam unable to compare.please can anyone provide brief explanation and help?
>
> Thanks in advance,
> Naren
Hi ,.
Once You go to SE95 Give the package name as - J1I2 and Execute .
If some Note has been applied for the package (Whcih Contains your FM) then it will show following nodes
Note Corrections
With Modification Assistant
Without Modification Assistant
Appends
So you need to find under whcih node Your update for FM exits .It must be Visible in red .
Now goto Menubar >>Goto >>Modification Adjustment .
once you adjust ,the FM should become Editable .
Regards,
Rajesh

Similar Messages

Carry out modification comparison for J_1BV45A first. No changes possible

Hi, every expert,
when I change the object J_1BV45A, It appears the error as below:
"Carry out modification comparison for J_1BV45A first. No changes possible
Message no. EU 526
Diagnosis
You are trying to edit an SAP object which has already been changed or enhanced in the current system.
A new version of this object, changed by SAP, has been imported into the system with a Release upgrade.
The new SAP version has not been reconciled with the modified version.
System Response
The system will deny access in change mode or enhancement mode until the objects have been reconciled.
Procedure
Run the modification adjustment (SPAU) for the object. If the object is supported by the Modification Assistant, you can adjust it by clicking the stoplight."
I don't know how to use SPAU to adjust it ? and I donn't know where is the tab 'stoplight'.
Anyone could help me how to resolve it ?
Best Regards,
Michael

Dear Michael,
Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
Let us know the status.
Thank You.
Kind Regards,
Rafikul Hussain

Carry out modification comparison for REPS first.No changes possible.

Hi all,
      Can anybody help me out. I am new to upgrade project. I have made all the adjustments in SPAU, but left out with one object.
     I have chosen reset to original for this object. When I want to add some custom code. It is not allowing me to do so throwing an error saying that " The object is still in upgrade mode." . It is not locked under transport #, but it is stored in smodilog table under my name.
     I am not able to see this object even in SPAU transaction, to correct my actions.
Thank You in Advance,
Nirmala.

Hi Rajneesh,
please have a look at following link and get a key from SSCR:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c8/19766d43b111d1896f0000e8322d00/frameset.htm
Regards
Bernd

Message "Carry out modification comparison... No Change possible" and SPAU

Hi
I'm trying to manually implement SAP note 1400194 and 1428579 both need to amend the Include RPCP45GD.
Every time you try and open the Include in edit mode to apply the changes manually you get the message
"Carry out modification comparison for REPS RPCP45GD first. No Change possible"
So I run SPAU... but the object RPCP45GD does not exist in SPAU so I can't do a modification comparison on something that's not there !
Any ideas how I should proceed ?
cheers Hugh

Modification assistant is on, otherwise SPAU would not work...
Activated object but had no effect...
However I did find a note in SPAU that was unreleased that related to another note that seemed to change the include I am looking at. This may be the reason why it's locked.
SAP's modification assistant is about as useful as a hole in the head !

Modification Comparison for SAP object

When we try to modify the program /DBM/MT_TILL_FUNC_D2063, reports the following message
u201CCarry out modification comparison for REPS /DBM/MT_TILL_FUNC_D2063 first. No changes possibleu201D
We just update our DSAP BM 6.00 system to service pack SAPK-60007INDBM from SAPK-60005INDBM.
Before this update was made, we were able to modify the programs, and there was not necessary for a registration key, know on it is necessary to input this key, we input the key from the marketplace, but still we canu2019t modify it.
We already try to do the recommendation mentioned, but the object doesn't show in the browser panel.
What can I do to resolve this issue?
Alvaro Corpeno

Hello Alvaro
   This message is caused because there is/are some object locking the object DBM/MT_TILL_FUNC_D2063 . So to check what action is necessary to take to do so you need to check if the objects are notes or just reuqests:
    - Transaction SE16
    - Table SMODILOG
    - List all entries for object DBM/MT_TILL_FUNC_D2063
    - There you will see for each record field OPERATION
    - Check all entries that contains OPERATION = 'NOTE'
    - On field MOD_NAME you can check the note number - last 4 digits are note version
    - Upload this note via SNOTE transaction.
    - This action will update system entries and unlock the object
Kind regards
Carlos Machado

Carry out new pricing for SO

Hi Guys,
Is there any function module/BAPI to carry out new pricing for sales order.
Somehow my BDC for VA02 is not working and
my bdc does only carrying out new pricing for that order.
This I want to replace with BAPI.
Could you please help me in this regard
Prashant

Hi,
An alternative solution is to use the BAPI to make a general CHANGE to the sales order and let the user exit take care of the repricing.
Calling program :
ls_order_header_inx-updateflag = 'U'.
    ls_logic_switch-pricing = 'C'.
    ld_bapi_reprice = 'C'.
Memory ID is read in MV45AFZB, form USEREXIT_NEW_PRICING_VBKD
    EXPORT ld_bapi_reprice TO MEMORY ID 'Z_BAPI_REPRICE'.
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
         EXPORTING
              salesdocument    = p_vbeln
              order_header_inx = ls_order_header_inx
              logic_switch     = ls_logic_switch
         TABLES
              return           = gt_return.
    FREE MEMORY ID 'Z_BAPI_REPRICE'.
    READ TABLE gt_return INTO ls_return
    WITH KEY type = 'E'.
    IF sy-subrc NE 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
           EXPORTING
                wait = ''. " No wait between orders
    ELSE.
      ls_error-vbeln = p_vbeln.
      ls_error-text = ls_return-message.
      APPEND ls_error TO gt_error.
    ENDIF.
MV45AFZB, USEREXIT_NEW_PRICING_VBKD :
DATA : ld_bapi_reprice TYPE knprs.
Memory ID is exported from program ZPSF_01_TOOLKIT_F01
IMPORT ld_bapi_reprice FROM MEMORY ID 'Z_BAPI_REPRICE'.
IF NOT ld_bapi_reprice IS INITIAL
AND sy-subrc IS INITIAL.
    new_pricing = ld_bapi_reprice.
ENDIF.

How to carry out license measurement for PLM Content Server

Hi,
Can anyone guide us on how the License measurement will work in case we have deployed the content server on a separte hardware box with AIX and Oracle
thanks

Hi
The database is MaxDB and not oracle as mentioned.
Thanks

Modification Comparison - No Changes Possible

Hi,
I have a program which has been modified (SAPLRSM1) with the implementation of a SAP note 987566. This has made a change which has appended two parameters to an include, which is giving a syntax error.
SAP Note 990672 looks to fix the problem by removing one of the parameters, but I cannot implement this note as it seems to be obsolete, and has the status Implementation Status: Cannot be implemented .
I know exactly where the error is in the code and in the short term want to comment out the parameter which is giving me an issue, but when I go to change the include, I get the message:
Carry out modification comparison for CPUB CL_RSCRT_RDA_TOOLS first. No changes possible
I have ran the modification comparison, but I do not get any further options.
Could somebody tell me where I am going worng and whether it is possible for me to make this change in this way.
We have SAP helping with some work which we are doing on our new 2004's box, but I need to get this part working urgently.
Thanks
DJL

Dear Michael,
Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
Let us know the status.
Thank You.
Kind Regards,
Rafikul Hussain

Modification comparison in SE95

Hi,
We are in the process of patch upgrading. After the Upgrade we have applied lot of notes. While applying some manual changes IT ask us to carry out modification comparison first, and it not allowing us to do modification.
It advise to do modification comparison thru T-Code SE95, pl. help me how to proceed further
Thanks
Rengaraj

Hi,
The Modification Browser
An overview of all modifications and enhancements found in your system can be displayed from the ABAP Workbench choosing the function Overview ® Modification Browser (SE95). You can also display an overview from the Repository Browser using Environment ® Modification Browser.
The following selection screen appears, where you can input selections that limit what the Modification Browser outputs:
Standard selections can be made on the upper half of the selection screen by entering the person who last changed the object, the number of a transport request or the package. If you enter the number of a transport request into the field Last transport request, the system displays only those objects of the request which were not modified in requests created at a later date. If you insert the request number in the field Request/Task, the system displays all modified objects of the object list.
You can use the Note Assistant to import notes into your system and apply the correction instructions contained therein. In the Modification Browser, you can expand a subtree below each note which contains the objects involved in the note correction.
Standard objects that are supported by the Modification Assistant during modification or upgrade can be displayed using the With Modification Assistant checkbox. All other objects are listed under the Without Modification Assistant category. This category also contains all objects that were modified in the current SAP System before the Modification Assistant was introduced.
Business Add-Ins provide you with an overview of all enhancements and modifications undertaken in your system. Further information on this way to create enhancements can be found in the section on Business Add-Ins.
Appends can be append structures, append views or append search helps.
As on the Display Options tab, you can restrict the display of objects modified or reset using specific criteria on the Reset Objects tab.
Once you have made your selections, the system takes you to the Modification Browser overview.
The Color key pushbutton displays a list of what certain highlighting colors mean within the Modification Browser.
Modifications to programs that cannot be assigned to a modularization unit (for example additional fields or comment lines preceding a subroutine) are displayed in the node External modularization units.
You can branch directly to ABAP Workbench tools from the Modification Browser display by placing your cursor on a specific object and choosing Display or Change.
Changes cannot be made to objects currently being adjusted.
You can also undo modifications from the Modification Browser by placing your cursor on a specific object and choosing Reset to original. Further information can be found in the section Resetting to the Original.
The Reset to original function can also be used with objects that were modified without the help of the Modification Assistant. Using this function causes the object to be deleted from the modification overview. If no original is available for the object, it is now treated as an SAP original (modifications may, however, be lost during upgrade).
If new complete objects (programs, function groups, and so on) are created, the corresponding transport object is added to the transport request. If function modules are deleted or view maintenance modules are generated, the associated function group is added to the transport request. In these cases, the Created/Generated node in the Modification Browser is displayed below the associated complete object.
Objects that have yet to be adjusted also show up in the Modification Browser and are highlighted in color. The objects displayed are compared during an upgrade or when a support package is imported in transaction SPAU by choosing Utilities ® Maintenance ® Upgrade utilities ® Program compare. Read the following sections for more information.
SPDD and SPAU are the transaction that are used after the upgrade for modification. SPDD is for adjusting the DDIC changes and SPAU is for all other repository objects like programs etc.
*Reward points
Regards

Modification comparison

We are upgrading from 4.5b to 4.7.
Whilst attempting to apply a SAP note, the message 'carry out modification comparison first. No changes possible' is received when attempting to modify a standard SAP program.
Any suggestions how to overcome this?

Hi Kevin.
Have you run transaction SPAU prior to your attempt of changing the SAP program?
Sounds like the program has been modified before and now a sap version of the program has been delivered. Before changing the program again, the system wants you to decide what to do with your old modifications.
Hope this helps, Kathrin!

Need exit/badi to carry out new pricing(b) for SO coming from CRM...

Hello Experts,
We are transferring internet sales orders from CRM to R/3. Now, what I need to do is
to trigger the 'carry out new pricing' for all the line items. Just like when we click
the update button in the conditions tab and click on the 'carry new pricing' option even though
user only displays the sales order in R/3.
Hope you can help me guys. Thank you and take care!

No Answer...

Tax can't carry out for some material and Cusomter

Hi,
     We found the following two material at Customer(2811165) can't carry out the VAT for create sales order. But the Tax can carry out for the other customer. The customer(2811165) can carry out the VAT for other material sales order. I checked the customer and material the Contry code(KR) and Tax classification(1) is correct and normal. It is only the two material for the special customer can't get the VAT. I check the pricing analysis. The follwoing is the log. Pls help check it.Thanks.
The mateials:
      KTPJC001-02
      KF-8005-0XXXXXXXXX
The following is the log:
Access Message Description
08 010 Access not executed (Requirement 008 not fulfilled)
10 010 Access not executed (Requirement 007 not fulfilled)
20 010 Access not executed (Requirement 008 not fulfilled)
Best Regards
Park

Dear Park
It seems you have assigned Routine 008 for the table which has the combination of some description and applicable to domestic. For the same combination, in VK13 / UTXJ, you have maintained a tax code for a domestic customer and you are trying to create a domestic sale order. Actually routine 008 is meant for Exports and hence the problem.
If my understanding is correct, Go to V/07, select the condition type JIND and click on "Accesses". There check whether any routine is maintained under the tab "Requirement".   If so, just remove those routines and retry your process.
thanks
G. Lakshmipathi

Sorting Multiple colunms and carry out multiple Searches

Hello
i would like to now i can carry out multiple searches for a single record. I have listed the some below
Server Name Db Name Schema Name Change Reference Person
GBCCCL15/16--CSAHEPA---DCDMIN----------46935-------------------
GBCCCL15/16--CSAHEPA---NCADMIN----------46935-------------------
GBCCCL15/16--CSAHEPA---BUADMIN----------47775-------------------
GBCCCL15/16--CSAHEPA--- PPADMIN----------48213-------------------
i would like to be able 2 carry out multiple searches on for example Schema Name (NCADMIN) and the Person's (Peter Salt) as i have a number of records that are similar i would like the Application to carryout multiple searches on the column reports at the moment all searches are done per column.

Pritesh,
Can you please clarify what this means? When you say "multiple searches", to me that implies that you want to issue multiple distinct queries, all executing concurrently. I can't believe my understanding is correct.
Joel

Serial number rejected when carrying out software update

Hello,
I'm trying to carry out software update for FCP 5.1...
When I enter the serial no. I get this message:
The serial number you entered is not valid. See the materials that came with your product for the correct serial number. Use uppercase letters when entering your serial number.
It is the correct serial no. so I don't know what to do?
Cheers.

http://discussions.apple.com/thread.jspa?threadID=1015113&tstart=50

Activiate carry out mass change in PM

dear all
im trying to use carry out mass change for functional location equipment's but I cant find it the menu under GO TO
im using EHP 6 SAP version
please I need to know how to activate this function
thanks and regards

Hello
Please check in transaction SFW5 below business function activated or not.If not please do so.
Business Function LOG_EAM_CI_1
Business function LOG_EAM_CI_2
Also Check if Enhancement Package 2 is applied. if not please do so.
Additionally you need to have authorization for authorization object I_MASS.
Br
Rakesh

Carry out modification comparison for FUNC J_1I7_USEREXIT_CALC_EXC_BASE

Similar Messages

Maybe you are looking for