Case sensitive disks?

All my disks are case sensitive on my Mac. Why don't your products install? I failed with both Acrobat Pro and PS Elements 12. I have lots of case sensitive file names. I can't change them. So do I have to plug in an external disk just to run your products?

But that does not work. It says on this page...
"This limitation applies to both the startup drive as well as the drive onto which the software is installed."

Similar Messages

Change from case-sensitive disk format to the normal Mac OS Extended.

Hi,
I need to change from a case-sensitive disk format to the normal Mac OS Extended Journaled version.
I have no external HD fitted, but I do have some DVD-Rs. I need to restore the data from 2 users, including iTunes and iPhoto files.
What's the best way to achieve this?
Many thanks,
Tris.

I just got off of the phone with Adobe support. They told me they knew the solution, but that they would not tell me tonight. I had to call back between 6:00 am and 5:00 PM tomorrow. That does not work with my schedule. So I googled some stuff and found that Adobe CS 3 is not supported with Case-Sensitive file systems. So OK, let me install this to my other MAC that has a non case sensitive drive. Same error. Even though I have a non case-sensitive drive, the OS is on a Case-Sensitive Drive and I am never prompted where to install like most all other Mac Software.
I have always formatted case-sensitive. So I am thinking to myself why not start using a non case-sensitive drive. Well, to start off I want it case sensitive. I enjoy web programming and like this feature. Sure it is not needed, but I am glad Apple offered me a choice. And I am sure there are many other reasons why to use it. Also I would be interested in knowing why non case-sensitive drives are supperior.
Why is this a requirement now? I have used Adobe software in the past without this specific issue. I also have Large TB drives and do not know how to 'safely' do this. You will not catch me jumping through this hoop. I will not risk the change to the file system. And I can not be expected to format my drive. I just wonder what Adobe would say tomorrow if I called.
The Direct line I was given by adobe is 800-642-3623 for support on this issue. You don't need anything else but to call this number and ask. You can not get through after hours though.
Wow, I just can't believe this and the lack of interest Adobe had with me.
I hope I can get a refund on the software. Until I am able to downgrade my file system format, I do not want to sit on Adobe's bill. I will buy it again assuming I learn I can't do without PS CS3.

Install PSE 10 failure - MacBookPro Lion - case sensitive disk failure

Can't install PSE 10 on my MacBookPro OS Lion 10.7.2, as disk format is case-sensitive + journaled.
The installer requires a NON-case-sensitive disk.
Is there any workaround ?
Any ideas ? Any help ?
Many thanks, yours
Michael

Unfortunately not MiMo-2012. All Adobe software for Mac OS require a non-case sensative volume. You may also find that you run into the same difficulties with other applications as well.

Time Machine backup failure on case-sensitive disk?

Hello,
I just started getting a Time Machine backup failure error that says "A disk you are backing up is case-sensitive, but the backup disk is not."
None of my external disks have changed and I've not added any new ones.
The error seems to be stemming from the fact that I'm logged in as multiple users on my system, all with MobileMe accounts. When I "get info" on all mounted disks, the only ones that are reporting "Mac OS Extended (Case-sensitive, Journaled)" are the mounted iDisks from the other use accounts that I'm currently logged in as.
Does this mean I cannot use Time Machine while logged in as multiple users, all with the iDisks mounted? That would be a major annoyance to either have to log out/log in to each user as I need them or to disable iDisk syncing in my MobileMe prefs.
Regards,
Terry

That seems odd to me; my iDisk shows WebDAV as the format and doesn't interfere with backups, but I don't have any other users' iDisks, either.
Another possibility would be to reformat your TM drive as case-sensitive. That would, of course, erase all your backups so TM would start over from scratch, and some possible troubles when restoring (see the pink box in #5 of the Frequently Asked Questions *User Tip,* also at the top of this forum, for details); but you'd no longer have the backup problem.

How do I remove a "created" case sensitive disk image?

Thanks for taking the time to read this, and thanks in advance for any and all advice. =)
I used this command in an effort to ready my machine for android sdk and kernel editing (more exploratory and self education than actual editing). I want to understand and learn more the linux environment, but have decided ubuntu would be a better way to do this. I have a relatively small SSD and need this 40gb back to dual boot.
hdiutil create -type SPARSE -fs 'Case-sensitive Journaled HFS+' -size 40g ~/android.dmg
Unfortunately, I have already proven I'm not worthy of such adventure as I can not seem to figure out how to remove the 40gb dmg and free the space.
I can eject, erase and move to trash but the 40gb just doesn't come free.
Thanks!!

Problem solved. Unmount, move to trash. Moderator please remove.

Time Machine Case-Sensitive Error

I've read several posts about people who encounter the Time Machine error that arises when TM thinks that one of the volumes (source or destination) is case-sensitive while the other is not. Some people encounter this error genuinely, by which I mean that there is in fact a discrepancy between the file systems; this is not the situation I wish to address.
There are other people - myself included - who have been using TM successfully for months or longer until one day the error crops up. When we check Disk Utility, both source and destination are shown to be case-insensitive. Many approaches have been suggested, from rebooting to reformatting, and many people have reported success; however, it appears to me that the problem has not been solved, since the cause of the problem has not been identified.
In my own experience rebooting sometimes fixes the problems temporarily (for a few weeks) before it later reappears. But I would rather not reboot repeatedly, repeatedly Verify the disks using Disk Utility (finding no errors every time), or reformat unless I am sure that it will fix the problem once and for all. With that in mind, does anyone know of a permanent fix to this problem?
Details:
- TM thinks that the source volume Macintosh HD is case-sensitive
- Disk Utility says that both the source and the external Firewire destination are case-insensitive

Hi, and welcome to the forums.
I've not seen any such posts here (and I read at least the title of every post in both the Leopard and Snow Leopard Time Machine forums).
There are problems, on occasion, when there's a case-sensitive disk image of some kind on the internal HD (some downloaded software comes on case-sensitive disk images, for some reason); but that doesn't seem to be what you're experiencing.
What, exactly, does the message say?
There might be some sort of problem with your internal HD. When this happens, does the disk show it's S.M.A.R.T. status as Verified? Does +Verify Disk+ ever show an error?
I'd be inclined to try a "full reset" per #A4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum. It's possible the preference file that directs you to is corrupted. This is a long shot, of course, but worth a try.
If this happens again, look for any disk images, and try to get the exact message. You may also want to look in your system.log for messages.

Installation of Photoshop CS6 (Extended) on Case-Sensitive Drives

I understand that under the "system requirements" the Adobe website says that you can't install PS CS6 (Extended) on case-sensitive drives (I'm using a MacBook Pro, OS X v. 10.7.4). This seems to have been the case at least since CS5.
I didn't see this, and I bought (quite excitedly) the update from CS PS5 (Extended) to PS6. I had NO PROBLEM installing PS5 on this drive.
Of course, as other users have indicated, the installer refuses to let you install on a case-sensitive drive (e.g., no options to install on another disk). There is also no mention that CS6 must be installed on the boot drive.
Requiring installation on the boot drive has serious implications for those of us who require case-sensitive drives for other work; I don't want to have to reboot from another drive when I use PS, and switch back and forth -- that's simply foolish.
From my point of view (as a user, granted), this is lazy programming, and this needs to be fixed ASAP. At least in my case, I have a $400 lump of software just taking up space, when I want to be up to my eyeballs enjoying PS6 in all it's glory.
Outside an Adobe fix, I don't see a solution to this problem. If I wipe my drive, format it as not case-sensitive, then I lose functionality for other critical work. Further, I'm not sure that the process of wiping the drive, formating it as non case-sensitive, and restoring everything from TimeMachine would even work (since the backup material is coming from a case-senstive drive and trying to go to a drive that is not case-sensitive).
The REALLY frustrating part is that I've installed Photoshop 3, 4, and 5 (and from much, much further back) on case-sensitive disks -- all with no problems. It's only now that the issue smacks me in the face.
There's got to be a work-around, if not a "real" solution.
Whatever help you might be able to offer would be greatly appreciated; details can be sent to cdretk at gmail dot com.
I have hope, and I thank you in advance.

Whether it is Apple or Adobe's work flow isn't the issue. Between the two
of them, if they are going to support both naming variants, then at both
Adobe and Apple:
1. You MUST use the same case file names. (E.g. FrameWorks and not
Frameworks) EVERY time. And refer to them in your programs and
configuration files the same way EVERY time.
2. You may NOT in your development code use different but case invariant
file names for different files.
3. Your libraries must do the Right Thing.
What gets me is that few others seem to have this problem. Perhaps Adobe
needs to abandon Apple development software, and roll their own outside the
standard system libaries.
Further searching shows that it is not a problem unique to Adobe. The
games BeJeweled, and BZFlag have this issue, as does the Steam game support
systems.
In every case I've run down to date, it has been a violation of #1.
Now there are workarounds: A script that creates appropriate symlinks on
case sensitive file systems would be fairly easy. It would impose some
minor amount of extra overhead.
I bought a copy of Adobe Creative Suite. I returned it unopened. You lost
a sale. Furthermore, until it is fixed, I will mention this at every
opportuity as an exampled of a combination of sloppy workmanship, and
customer indifference on the part of Adobe.
Tell your bosses, Chris, they need to fix this.
Respectfully,
Sherwood of Sherwood's Forests

Can't use time capsule because it won't backup a "case sensitive drive". what does this mean?

Back up fails because the time machine can't back up a "case sensitive" disk. I have no idea what this means or how to fix it.

What are you backing-up to, an external HD or a Time Capsule?
Check the Format of your internal HD and your external HD (assuming that's what you're backing-up to), via Disk Utility (in your Applications/Utiliites folder).
Click the partition (indented under the main line for the drive) in the sidebar, and see what's shown at the bottom:
Do the same for your Time Machine drive, and report what you find.

Conversion from a case-sensitive to case-insensitive disk configuration.

Being an old Unix user, I configured my disks to be case-sensitive. I've discovered that patches and updates to some applications fail due to changes in the case used for file names.
Is there a painless way to convert a case-sensitive file system to one that is case-insensitive?

I don't have current version of SoftRAID 4.0 but I thought that was one of its features, just as it can change the block size for arrays from 16-32-64-128k etc on the fly.
I haven't used it, but iPartition claims to be able to convert in-place between case-sentitive and case-insensitive HFS+ formats.
The trouble is, even then, a restore may not work properly.
http://www.dslreports.com/forum/r19614460-Convert-hard-drive-to-HFS-that-is-not- case-sensitive

I recent la format the drive and create a case sensitive jornal and put a password. How I undo it if I just see the whole drive as the recovery disk

I want to format my computer and I start to do that but I fondo a copy of the boot folder on the drive, not the recovery drive. I formated and make it case sensitive jornal with a password. Then I put a password in main too. So the drive the entre drive become my recovery drive.So I have two recovery drive I think.I learn almost all the diskutil comando and I don know how to fin it. The disks are not showing the one with the passwords.

Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks,

HT201250 error: a disk you are backing up is case sensitive, but the backup disk is not.

Time Machine error: a disk you are backing up is case sensitive, but the backup disk is not.
How do I reformat my backup drive to backup a case sensitive hard drive?

See here, for example. Do not select MS-DOS, but use the default "Mac OS Extended".

Mac OS Disk Format, claiming to be Case-Sensitive on a NonSensitive system.

I recentely swapped out drives on my 2009 Mac Mini. And for some reason, even though i specifically formated it to be a non-Case Sensitive drive, it still claims it is. I'm currently trying to load steam and it says that my drive is case sensitive. Can anyone help? My boot/main drive is formatted as Mac OS Extended (Journaled) PLEASE HELP!

You need to prep the drive as follows:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

HT3275 Time Machine couldn't complete the backup to "My Passport Studio".. A disk you are backing up is case-sensitive, but the backup disk is not.

Hi,
Time Machine won't back up files on another external hard drive as it says it is case sensitive. The other drive contains mainly music and pictures.
Thanks for any suggestions,
Lisa

See pink box on this page:
http://pondini.org/TM/5.html

How can I backup data from a case-sensitive volume to a NON-case-sensitive volume?

The case-sensitive volume in this instance being a desktop-mounted disk image volume.
A tragi-comedy in too many acts and hours
Dramatis Personae:
Macintosh HD: 27" iMac 3.06GHz Intel Core 2 Duo (iMac10,1), 12 GB RAM, 1 TB SATA internal drive
TB1: 1 TB USB external drive
TB2: 2 TB USB to Serial-ATA bridge external drive
Terabyte: a .dmg disk image and resulting desktop volume of the same name (sorry, I don't know the technical term for a .dmg that's been opened, de-compressed and mounted -- evanescently -- on the desktop)
Drive Genius 3 v3.1 (3100.39.63)/64-bit
Apple Disk Utility Version 11.5.2 (298.4)
Sunday morning (05/08/11), disk utility Drive Genius 3's drive monitoring system, Drive Pulse, reported a single bad block on an external USB2.0 1TB drive, telling me all data would be lost and my head would explode if I didn't fix this immediately. So I figured I'd offload the roughly 300 GB of data from TB1 to TB2 (which was nearly empty), with the intention of reinitializing TB 1 to remap the bad block and then move all its data BACK from TB 2. When I opened TB1's window in the Finder and tried to do a straight "Select All" and drag all items from TB1 to TB2, I got this error message:
"The volume has the wrong case sensitivity for a backup."
The error message didn't tell me WHICH volume had "the wrong case sensitivity for a backup," and believe me, or believe me not, this was the first time I'd ever heard that there WAS such a thing as "case sensitivity" for a drive. I tried dragging and dropping some individual folders -- some of them quite large, in the 40GB range -- from TB1 to TB2 without any problem whatsoever, but the majority of the items were the usual few-hundred-MB stuff that seems to proliferate on drives like empty Dunkin' Donuts coffee cups on the floor of my car, and I didn't relish the idea of spending an afternoon dragging and dropping dribs and drabs of 300GB worth of stuff from one drive to another.
Being essentially a simple-minded soul, I had what I thought was the bright idea that I could get around the problem by making a .dmg disk image file of the whole drive, stashing it on TB2, repairing and re-initializing TB1, and then decompressing the disk image I'd made of TB1, and doing the "drag and drop" of all the files in resulting desktop volume to TB1. So I made the .dmg of TB1, called "Terabyte," stashed that .dmg on TB2 (no error messages this time), re-initialized and then rebooted the iMac from my original Snow Leopard 10.6.1 disks and used Disk Utility to erase and initialize TB1 -- making sure that it was NOT initialized as case-sensitive, and installed a minimal system on TB1 from the same boot. Then I updated that 10.6.1 system to 10.6.7 with System Update, and checked to see that Disk Utility reported all THREE drives -- internal, 1TB, and 2TB -- as Mac OS Extended (Journaled), and no "case sensitive" BS. I also used Drive Genius 3's "information" function for more detailed info on all three drives. Except for the usual differing mount points, connection methods, and S.M.A.R.T. status (only the Macintosh HD internal, SATA 1TB drive supports S.M.A.R.T.), everything seemed to be oojah-***-spiff, all three drives showing the same Partition Map Types: GPT (GUID Partition Table.) Smooth sailing from here on out, I thought.
Bzzzzt! Wrong!
When I opened the Terabyte .dmg and its desktop volume mounted, I tried the old lazy man's "Select All" and drag all items from the desktop-mounted drive "Terabyte" to TB1, I got the error message:
"The volume has the wrong case sensitivity for a backup."
I then spent the next three hours on the phone with AppleCare (kids -- when you buy a Mac ANYTHING, cough up the money for AppleCare. Period.), finally reaching a very pleasant senior tech something-or-other in beautiful, rainy Portland, OR. Together we went through everything I had done, tried a few suggestions she offerred, and, at the end of three hours, BOTH of us were stumped. At least I didn't feel quite as abysmally stupid as I did at the beginning of the process, but that was all the joy I had gotten after two solid days of gnawing at this problem -- and I mean SOLID; I'm retired, and spend probably 12 hours a day, EVERY day, at the keyboard, working on various projects.
The AppleCare senior tech lady and I parted with mutual expressions of esteem, and I sat here, slowly grinding my teeth.
Then I tried something I don't know why I was so obtuse as to not have thought of before: I opened Apple's Disk Utility and checked the desktop-mounted volume Terabyte (Mount Point: /Volumes/Terabyte), the resulting volume from opening and uncompressing the .dmg "Terabyte".
Disk Utility reported: "Format : Mac OS Extended (Case-sensitive)." Doh!
Obviously, TB1, the 1 TB USB external drive I'd actually bought as part of a bundle from MacMall when I bought my 27" iMac, and which I had initialized the first day I had the iMac up and running (late November 2009), had somehow gotten initialized as a Case-sensitive drive. How, I don't know, but I suspect the jerk behind the keyboard. Whatever the case, when I created the Terabyte disk image (the drive's original name: when I erased and re-initialized it -- see above -- I renamed it "1TB" for quick identification), the original drive's "Case-sensitive" format was encoded too. So when I tried to drag and drop EVERYTHING from the desktop-mounted volume "Terabyte" to the newly initialized and "blessed" (now THERE's a term from the past!), the system recognized it as an attempt as a total volume backup, and hit me with "The volume [the desktop-mounted volume "Terabyte" -- BB] has the wrong case sensitivity for a backup." And, of course, the reinitialized TB1 was now correctly formatted as NOT "case-sensitive."
Well, that solved the mystery (BTW, Disk Utility identified the unopened Terabyte.dmg as an "Apple UDIF read-only compressed {zlib}, which is why the .dmg file could be copied to ANY volume, case sensitive or not), but it didn't help me with my problem of having to manually move all that data from the desktop-mounted volume "Terabyte" to TB1. I tried to find a way to correct the problem at the .dmg AND opened-volume-from-.dmg level with every disk utility I had, to no avail.
Sorry for the long exposition, but others may trip over this "case-sensitive" rock in the road, and I wanted to make the case as clear as possible.
So my problem remains: other than coal shovel by coal shovel, is there any way to get all the data off this case-sensitive desktop-mounted volume "Terabyte" and onto TB1.
Not that I know whether it would made any difference or not, one of the things that got me into this situation was my inability to get "Time Machine" properly configured so it wasn't making new back-ups every (no lie) 15 minutes.
Philosophical bonus question: what's the need for this "case-sensitive," "NOT case-sensitive" option for disk initialization?
As always, thanks for any help.
Bart Brown

"Am I to understand that you have a case-sensitive volume with data that you want to copy to a case-insensitive volume? And the Finder won't let you do it? If that's what the problem is, the reason should be obvious: on the source volume, you may have two files in the same folder whose names differ only in case. When copying that folder to the target volume, it's not clear what the Finder should do."
Yes, I understand all that... NOW.
What I had (have) is a USB external 1TB drive (henceforth known as "Terabyte") that I bought with my 27" iMac. I formatted, and put a minimal (to make it bootable) system on Terabyte the same day back in late November 2009 that I set up my 27" iMac. Somehow -- I don't know how -- Terabyte got initialized as "case-sensitive." I didn't even know at the time that there WAS such a thing as "case-sensitive" or "NOT case-sensitive" format.
Sunday morning (05/08/11), Drive Pulse, a toolbar-resident utility (that's Part of Drive Genius 3) that monitors internal and external drives for physical, problems, volume consistency problems, and volume fragmentation, reported a single bad block on the volume Terabyte, advising me that it would be best if I re-formatted Terabyte ASAP. I thought I could open Terabyte in a Finder window, Select All, and drag everything on the drive to ANOTHER USB external drive of 2 TB capacity (henceforth known as TB2). When I tried to do that, I got an error message:
"The volume has the wrong case sensitivity for a backup."
First I'd heard of "case sensitivity" -- I'm not too bright, as you seem to have realized.
Oddly enough (to me), I could move huge chunks of data, including a folder of 40GB, from Terabyte to TB2 with no problem.
Then the scenario unfolded per my too-convoluted message: several hours of trying things on my own, including making a .dmg of Terabyte (henceforth to be known as Terabyte.dmg) -- which left me with the exact same problem as described in the previous 4 paragraphs; and my 3 hours on the phone with AppleCare, who at least explained this case-sensitive business, but, after some shot-in-the-dark brainstorming -- tough to do with only one brain, and THAT on the OTHER end of the line -- the very pleasant AppleCare rep and I ended up equally perplexed and clueless as to how to get around the fact that a .dmg of a case-sensitive volume, while not case-sensitive in its "image" form (Terabyte.dmg), and thus able be transferred to TB1 or TB2 with no problems whatsoever, when opened -- either by double-clicking or opening in Disk Utility -- produced a desktop-mounted volume (henceforth known as the volume "Terabyte," the original name of the case-sensitive volume from which TB1.dmg had been made) that had the same case-sensitivity as the original from which it was made.
In the meantime, having gotten the data I needed to save off the physical USB "case-sensitive" volume Terabyte in the form of Terabyte.dmg, I erased and re-initialized the physical USB "case-sensitive" volume Terabyte, getting rif of the case sensitivity, and renaming it TB1. But it all left me back at square one, EXCEPT I had saved my data from the original "Terabyte" drive, and reformatted that drive to a NON- case-sensitive data now named TB1. The confusion here stems from the fact that problem case-sensitive drive, from which I made Terabyte.dmg, was originally named "Terabyte". When I re-initialized it as a NON case-sensitive drive, I renamed it TB1. I'm sorry about the confusing nomenclature, which I've tried to improve upon from my original message -- usual text-communication problem: the writer knows what he has in mind, but the reader can only go by what's written.
So, anyway, I still have the same problem, the desktop-mounted volume "Terabyte" still cannot be transferred in one whole chunk to either my internal drive, TB1, TB2, as the Finder interprets it as a volume backup (which it is), and reads the desktop-mounted volume "Terabyte" as case-sensitive, as the original volume -- from which the disk image Terabyte.dmg was made -- had been at the time I made it.
"As long as that situation doesn't arise, you should be able to make the copy with a tool that's less fastidious than the Finder, such as cp or rsync."
I'm afraid I have no idea what "cp or rsync" are. I'd be happy to be educated. That's why I came here.
Bart Brown
Message was edited by: Bartbrn
Just trying to unmuddy the water a bit,,,

How do i reformat a case sensitive external hard drive without losing data

I know there are a lot of posts about this, and i have spent hours trying to find a soloution / understand what people have responded to others, but i can't work this out.
I also have a Buffalo HD (let's call it HD1) that stores my itunes library.
I have a WD My Passport for Mac (let's call it HD2) that backs up my Mac Book Pro.
I have an older WD that has older TM back ups on it from previous computers (let's call it HD3)
I have one spare completely 'clean' WD hard drive (let's call it HD4).
My laptop was really slow and full so i went to Genius bar, they sold me the Buffalo HD and they moved my itunes to it and set it up so it now has my itunes. I used this disk to run two TM Backups before i realised the drive was nearly full, so i bought the WD My Passport HD2.
I now use WD My Passprt HD2 for TM.
I want to MOVE the backups on HD1 to My Passport HD2 as there is lots of space on it. I also want to move my itunes library from HD2 as a back up.
But i can't!!!
After reading for hours, apparently this is because my HD1 is case sensitive, journaled. And it needs to be Journaled to work with TM/OSX or something very confusing. I have read lots of threads about re-formatting / partitioning and all things that are way over my head. But the one thing i do understand is if i reformat HD1, it erases the data.
This is NOT an option as it holds my WHOLE itunes. The Itunes is WAY too big to drag onto my mac book pro and then move it over to HD2 and make that my itunes folder.
HOW THE **** ARE YOU SUPPOSED TO BACK UP THE CASE SENSITIVE DRIVE BEFORE REFORMATTING IT IF IT'S TOO BIG TO FIT BACK ON YOUR COMPUTER? Surely that's the whole point of having an external drive... to back up AND give you more space?
I'm so mad that the apple store did this to me... they should know that case sensitve wouldn't work with a passport... that i would have problems. UGh.
I have options to move the files from HD1 as i have HD2 and HD3 and then also the completely unused HD4... but i can't move anything anywhere due to this case sensitive nightmare.
Someone PLEASE HELP ME.
thanks.

Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks,

Case sensitive disks?

Similar Messages

Maybe you are looking for