Castle Attack – Ultimate HD , 550Diamonds, Developer: workroom zero

Dear Master,
PLEASE HELP ME !!!!!! This is a big problem about this charge of my account.
I never buy the items of this game before, and after i check out this game there is not any options to purchase these item at all !!!
So i can not know about what it happened !! Could please help me to solve this problem please ??????
Thanks  alot.
attached:
Castle Attack – Ultimate HD+, 550Diamonds, Developer: workroom zero
Report a Problem     Zero Workroom     In App Purchase     $9.99
Castle Attack – Ultimate HD+, 550Diamonds, Developer: workroom zero
Report a Problem     Zero Workroom     In App Purchase     $9.99
Castle Attack – Ultimate HD+, 550Diamonds, Developer: workroom zero
Report a Problem     Zero Workroom     In App Purchase     $9.99
Castle Attack – Ultimate HD+, 100Diamonds, Developer: workroom zero
Report a Problem     Zero Workroom     In App Purchase     $2.99
Castle Attack – Ultimate HD+, 25Diamonds, Developer: workroom zero
Report a Problem     Zero Workroom     In App Purchase     $0.99
Castle Attack – Ultimate HD+, 25Diamonds, Developer: workroom zero
Report a Problem     Zero Workroom     In App Purchase     $0.99
Always Up! HD, Tibet level pack, Developer: AlphaWeb Plus LLP
Report a Problem     AlphaWeb Plus LLP     In App Purchase     $0.99
Always Up! HD, Asian Sunrise level pack, Developer: AlphaWeb Plus LLP
Report a Problem     AlphaWeb Plus LLP     In App Purchase     $0.99
Always Up! HD, Halloween level pack, Developer: AlphaWeb Plus LLP
Report a Problem     AlphaWeb Plus LLP     In App Purchase     $0.99
Always Up! HD, 10 Wings Pack, Developer: AlphaWeb Plus LLP
Report a Problem     AlphaWeb Plus LLP     In App Purchase     $0.99
Order Total:     $38.90

Similar Messages

  • Security concern/ application concerns and procedures for zeroing all data

    Hi,
    I've looked through the posts and can't find the answers to my questions so here goes:
    I've had a MacBook Pro for about a year, and I may have to return it to my employer. In an effort to prepare the machine and make sure my information can't be accessed once it is returned I have read that the proper thing to do is zero all data (I have read the MAC how-to page on the process).
    I was told that zeroing all data will remove my files and access to trashed items after I give it back to my employer, but I have a few concerns:
    1. I have an external hard drive with more than enough room to transfer my files, but what exactly does everyone mean by "all my files"? Just my personal files in the various applications like iPhoto, iTunes, and even My Documents, or are there others as well?
    2. Although I have the DVD/CD that came with the machine, there were additional software applications installed by the administrator at my place of work (Office - Power Point etc). Do these things get removed when I zero data or will they still be there?
    3. Lastly, is it true that you should zero up to three times to make sure your data is inaccessible? I know it will take about 24 hours to do approx. 20 gb's....
    Thanks so much in advance,
    Goldilox

    I have an external hard drive with more than enough room to transfer my files, but what exactly does everyone mean by "all my files"?
    Well what do you mean by all your files? Usually all your things will be in your home folder, so as long as you have enough space to contain that, you'd be okay.
    Although I have the DVD/CD that came with the machine, there were additional software applications installed by the administrator at my place of work (Office - Power Point etc). Do these things get removed when I zero data or will they still be there?
    Zeroing data happens at the drive device level, so everything on that volume will be gone. It's akin to formatting.
    Lastly, is it true that you should zero up to three times to make sure your data is inaccessible? I know it will take about 24 hours to do approx. 20 gb's....
    It depends who you're worried the attacker is. For most people, zeroing a few times will be enough to prevent them ever retrieving the data. Very expensive specialised data recovery equipment can still recover data from a zeroed drive, though... so if you're afraid of the police, or the FBI, or the NSA, then you're better off physically shredding the hard drive.

  • CSS DoS illegal Src Attack

    Hi,
    On my CSS 11506, logs are full of these kind of error messages:
    "NETMAN-5: Enterprise:DOS Attack:Illegal Src -> 5 times". It also generates a trap every seconds, flooding our syslogd and trapd server.
    The first information one would obviously require is which IP address, and on which interface, is causing this error message.
    I had a look at the "sh dos" command and I can see the counter for "Illegal Src Attacks" increasing (quite logical), BUT then in the detailed events, I can't see any of these events, I only see few SYN Attacks detailed events.
    So does anyone know where I can get the details for these "Illegal Src Attacks" events ?
    Many Thanks for any help,
    Regards,
    Arno

    Hi to all,
    i desperate need your help.
    I got a very similar problem with CSS.
    Same DoS attack. (many Syn Attack visible in the "show dos" detailed command and many Src Attack but only in the counters)
    The strange thing is that the ip address involved are unicast ip (not multicast).
    I've not understand many things.
    The first is , what's the reason why CSS see that 10.6.27.133 is an Illegal Src??? (It's in this case the .133 is the ip address of interface 6/9 of CSS)
    OS Attack Event  1:
    First Attack: 31/08/2010 22:52:24
    Last Attack:  31/08/2010 22:52:34
    Source Address:             10.6.27.133 Destination Address:         10.6.84.69
    Event Type:                 Illegal Src Total Attacks:                        3
    Someone can help me to understand?
    Below is the "show dos" with one event as an example
    Total Attacks: 33170637
    SYN Attacks:                 14,843,912 Maximum per second:                 284
    LAND Attacks:                         0 Maximum per second:                   0
    Zero Port Attacks:                    0 Maximum per second:                   0
    Illegal Src Attacks:         18,325,982 Maximum per second:                 224
    Illegal Dst Attacks:                743 Maximum per second:                   4
    Smurf Attacks:                        0 Maximum per second:                   0
    DOS Attack Event 12:
    First Attack: 31/08/2010 22:18:34
    Last Attack:  31/08/2010 22:31:26
    Source Address:             10.6.67.167 Destination Address:     113.213.43.145
    Where do you suggest to investigate??
    Many thanks,
    M.G.

  • Settings Get Zeroed out after File Export

    I just noticed that out of a group of about 110 JPGs I was editing tonight, about 5 of them had their Develop Settings zeroed out after I exported the files.
    Examples:
    1.  One file's Fill Light went from 14 to 0 after File Export.
    2.  Another file's Fill Light went from 17 to 0 after File Export.
    3.  Still another file's Black went from 3 to 0; its Brightness went from +5 to 0; it's Contrast went from -1 to 0....all 3 things on the same file zeroed out.
    4.  Still another file's Black went from 1 to 0, and its Contrast went from -3 to 0.
    5.  Another file was rotated by .28.  After exporting, the rotation in the history went from .28 to 0.
    One other problem I saw with at least 2 of these files (different than the 5 above), I had created virtual pictures for these 2 and exported them as TIFFs to Photoshop CS3.  After the TIFF file was updated with CS3, it automatically was reimported to LR.  There is no "Import" listed in the history, nor is there any "Created Virtual Copy" in the history.
    I don't think I'm doing anything wrong; again, there have only been 5 out of about 110 JPGs for which as happened.

    I think I have that box checked, but I'm not sure where to find it.  I seem to recall having checked something like this before, but, again, I just can't
    seem to find where it is.  I've checked in Preferences and do not see it, as well as other places.
    Anyway, I do not export files to CS3 very often, but I know that every time I do, the edited file gets added back into the LR Catalog when I close out the file in Photoshop CS3.  I typically export these files to CS3 keeping the LR adjustments.
    I originally had this set of images sorted by File Name.  I did that because within this set are pictures taken from 2 different cameras, with two completely different types of file names.  I wanted only to work on the images from one camera at a time.  While sorted by File Name, the edited file does get added to the Catalog, stacked upon the original file....so, yes, they are side by side.
    I did try sorting by Capture Time, but that didn't make any difference.
    Because my other problem of settings being zeroed out appeared to be "fixed," I was hoping this problem also would be fixed.  But when I tried the same procedure as last night (only with the files sorted by Capture Time instead of by File Name), the same thing happens...there is no "Import" listed in the History panel.
    What has been "fixed," however, is that for those few files that I made a Virtual Copy of, the History panel now shows "Create Virtual Copy."  I did not do anything to these files.  Perhaps the reboot of my computer fixed this.  I really don't know.
    As mentioned, I do not export files very often to CS3, so this problem may have always existed (not showing "Import").
    Thanks for your reply....I'll watch for more in the future, but because the problem happened again this morning, I think it is perhaps a software bug.

  • For some reason I am unable to load the updates from the App Store for ever notes. When I try to, I am told I am already on a new version, which in fact is not the case. Anyone else with exposure to this? I have also written to Evernote and App Store

    Similar configuration and circumstances incuding unexplaining lag time in keyboard and mouse both just s
    s
    Check your purchase history and see what shows?  Check to see if your Apple ID has had any pw changes recently and if it is still registered as before.  I found some unsual anomolies is this area where and Apple ID fail off the radar screen apparently and then reappeared and that was for I Tunes.  I am having the same problem with App Store as I did a recent wipe of my Mac OSX hard drive and I Pad 2.  Initially it appeared  a gap in records, so where are the other apps i know i purchased, then with I Tunes, restrictions around ability to download music on my Mac, which I had been doing all year, and transfer to I Pad 2 or I Phone, which i had been doing all year long as wll.  The I Tunes matter has gotten better, but I've engaged Express Support, Contacted Store, and others, have not received a definte explanation yet
    From an App Store perspective, I noticed at least 50% discrepancy verus what I have bought and what they had showing. Again, some i think will be linked to the disappearing and reappearing Apple ID  which i can only assume is a sporadic database issue, but quite stratling and problematic if you need your apps restored quicly.
    I have a similar configuration, plus had Lion Server, have not reinstalled server yet, awaiting stabiliztion of OSX, but i think that may have some relevance to the location of a variety of the elusive content, but only a hunch at this point.
    There are a number of virus elements which have not been picked up consistently. Some operating as bots within a platform where they actually take charge of certain activites and it becomes a struggle to rid them. I am using  Kaspersaky Universal One which has helped some we had over 17 threats in 1 hour yesterday, but they diffused them.  I've got so many odd issues happening now like downloads directed to the wrong folders for major loads to typing locking up  on both blue tooth and usb but i notice a quick switch makes a difference.  Hint Hint, so i feel like I am in the Bermuda Triangle right now with so many strange things happeining including the post below about Evernote, same here.  Pay close attention to Virus, Malware, and check your log files for unusual activities and and also watch your key chains closley for any attacks. Some of the problems i have encountered actually involve activities taking place within sttps: sessions, so I think a number of things are going on that require an intense focus from the user, Apple Tech and Security and outside resources, because it is becoming more widespread and even though I believe some can be explained relative to user error and lack of familierity, some cannot as the timing and acceleration is to coincendental in my humble opionion.  Hope these areas to look for offer some resolution for you as well as some insight into other areas that could be problematic if not closley monitored.

    I think not the question, but "What is your issue"?  Afraid to learn the truth of today's reality of Cyber threats and to give other community users the the benefits of such or too just mimize my response as a "wandering rant" ?
    I'm actually going to take the high road on this one "for the most part" in contrast to the response you provided to me which reflects your seemingly low road mentallity and lack of appreciation for a new member simply trying to add some value based on recent and current real world experience:
    1) I am a new community member and inadvertently may have submitted a response to a problem i saw versus submitting a question; however, i quickly noted that point.
    2) I selected Mac OSX 10.7.3 Lion, Lion Server and other products ( that's right, i do own Apple products) for their resiliency to virus, malware, and for their peformance, design and reputation. I still believe I made the right decison.
    However, I take exception to your inherent criticism and vailed insults on behalf of myself and the large number of excellent Apple Support representatives, many Sr. Advisors, and External Virus/Malware experts engaged, at the suggestion of Apple and others to help resolve my system issues.
    Downloading of Apps from AppStore, I Tunes, and Evernotes were in one way or another impacted by these virus, malware and hacker activites.  To the credit of Apple, i have not found a single fradulent transaction, however the trouble makers had broader objectives which have caused problems and easily could many others both consumer and enterprise class. Given ongoing criminal investigation, l'll keep those particlualrs confined
    If you actually took time to read my "rant" versus simply belittiling and criticizing my sincere efforts to help somone else you would see there are some meaningful points to take into consideration. You want the post removed, feel free, it only shows to further reflect your naivety and lack of consideration for others unless it suits your myopic and narrow minded perspective to the real cyber threats we all "can" face. Even selecting Mac arguably one of the very best platforms, still does not afford you the flexibiity to assume you or your company, as in my case, is immune.
    If i told you the specifics, of course, it would clearly be beyond your comprehension as your mind is obviously too closed to even consider the thought let alone understand the intricacies of their tools and tactics. Write to the Wall Street, NY Times, you suggest; please, you simply bury your self further in the sand by haphazardly suggesting such a foolish idea. Just another petty attempt to diminish the threat and again show your lack of respect for a quality company and organizaton as Apple who is aggressively working to address my concerns and plan for the next product release without giving up IP and wasting time answering to the media when there is real work to be done industry wide.
    In contrast, I will let Apple to what Apple does best...get it or still not ??  See, they have seen for a long time what you clearly don't, and that is that no system is ever perfect. That is why Mountain Lion will have a NextGen Firewall & associated tools a.k.a Cyber Castle, which has been under  development for sometime and reviewed by industry experts before release so as usual Apple will do their very best to get it right and will again be advanced in many ways ahead of the pack.
    So, i've wasted too much important time trying to open your eyes to reallity. When you wake up in the morning, remove your head from the sand and wipe the grains from your eyes, have a read of this....oh, and don't bother responding or apologizing.  As you said, it's not worth your time to hear from me; in contrast, I felt it was worth my time to keep you from misleading others by your lack of respect for the real Cyber threats we face and that any system designed can be penetrated if the bad guys want in bad enough.  Time to get real Sand-man.....

  • Could not get schema Object:java.sql.SQLSyntaxErrorException ora-904

    All of a sudden I get
    Could not get schema Object:java.sql.SQLSyntaxErrorException: ORA-00904: "SYS"."O"."NAME": ongeldige ID
    when doing anything in the tables tree in the connections pane
    The only thing I set recently is pga_aggregate_target
    Environment
    Oracle 11.2.0.1
    OS Windows Vista Ultimate sp2
    Sql developer 2.1.1.64.39 with its own JDK
    As the download links on OTN are broken I can not upgrade, and I'd rather not work in command line sqlplus.
    Help!!!
    Sybrand Bakker
    Senior Oracle DBA

    My copy of sqldeveloper isn't located in that directory. Would that matter?
    In the mean time I have disabled filtering the tables node. Opening the tables node doesn't result in exceptions anymore.
    Now, when I click on any table in that node I get 4 identical ora-904 error messages for sys.o.name for any table.
    Apparently it is querying either the all_objects view and it thinks it is querying sys.obj$.
    I didn't yet enable sql_trace for the session, I'm more or less giving up on sqldeveloper. I can not use the space bar in any datagrid, sqldeveloper has always been extreemly unresponsive when navigating the schema browser (as opposed to Toad), etc, etc. Too bad I bought Sue Harpers book, but I think I will be de-installing sqldeveloper soon.
    Sybrand Bakker
    Senior Oracle DBA

  • How can I get ThinkVantage button working again? (after a full HD rebuild)

    WindowsXP Pro, ThinkPad T60   (2007-F4G / UT0F4UK)
    Hi
    How do I get my Thinkvantage button working again?
    Background:
    I had a virus attack and as a precaution I zero-ed my ENTIRE hard disk (using KillDisk). I have managed to re-install most things, including I now have an icon on the taskbar called "Launch Lenovo ThinkVantage Toolbox". However I would prefer it to be fired up by my pressing the (blue) ThinkVantage button at the top of my keyboard.
    I have refused point blank to pay the (outrageous) price of GBP 40.00 for Lenovo to send me a CD with Windows etc on it, but have managed (eventually) to rebuild the entire disk driver by driver until the ThinkVantage Toolbox thing (version 6.0.5449.31) could take over and bring my drivers up to date when I Update my system.
    (It's just that they may have gone in incorrectly??)
    Is there something I should have done during installation.
    Ship

    Hi Ship,
    1. Install these for thinkvantage button:- 
    http://www-307.ibm.com/pc/support/site.wss/MIGR-62850.html
    http://www-307.ibm.com/pc/support/site.wss/MIGR-68000.html
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • How to create idocs  for  existing records

    Hi
    are there any standard program by which i could create and send the existing customer invoice (VF01) data thru EDI idoc to a 3rd party system even if the output type is not defined during the creation of the invoices?
    Regards
    Sujai

    I am supposed to send all customer invoice data to an external system. I have been able to configure the system to trigger an idoc when an invoice is saved. That takes care of my delta transfer. But i would like to know if there is a way by which i can send all the existing customer invoice data to the 3rd party system that were already created in the SAP system. Something like an initial download of all the existing records.
    I am asked to keep the abap development to Zero as far as possible, hence i am exploring the idea of finding any standard program that could do this for me.
    just like Tx: BD10 for the material master data.
    I tried VF31 but the problem is that the invoice that would have been created might not contain the output type as EDI. So is there a way by which i can achieve this task with any standard program?
    I also have another question:
    how do i do the configuration to send all the SD invoices to a specific partner all the time thru EDI by default?
    Sujai

  • Flash and Reader users take notice of critical security issue.

    http://www.zdnet.com/blog/security/adobe-warns-of-flash-pdf-zero-day-attacks/660 6
    This is a zero day attack, meaning it's out there right now. Until this gets patched, use Preview instead of Reader.
    Use a Flash blocker. For Safari: clicktoflash; for Firefox: NoScript or FlashBlock; Camino has built in Flash blocking capability.

    Is there more exacting information on how this affects the Mac OS X
    and what one would actually do other than not open new downloads
    or new content of unknown quality? (This may not affect me at all.)
    And for those users of older PPC hardware, the Adobe pre-release of
    their Flash Player is unlikely to be supported, especially in Tiger 10.4
    unless Adobe is going to offer transitional updates until they drop all
    support for the older OS X versions, especially affecting Tiger soonest.
    The end is near for some unsupported OS versions, from both internal
    support and external third-parties. So, this is another wake-up call to
    those using older Mac hardware and the decreased support for it.
    I noticed a similar thread on this Flash & Reader topic, in another page:
    http://discussions.apple.com/thread.jspa?threadID=2450866&
    +{While I do have Leopard 10.5, I choose to stay with what works best+
    +in the older PPC G4 hardware, for awhile longer. With three machines+
    +the transition is not of high interest to me. Leopard does not impress.}+
    Some clarity, outside of Intel-based and dual boot newer build Macs,
    is something lacking in the Adobe security source pages. They did an
    announcement some months ago, re: lack of 10.4.11 future support.
    However that works out...
    Good luck & happy computing!

  • Now you see me, now you dont

    Hello!
    I have a very stupid problem - when I add components to JApplet, sometimes they are shown, and sometimes they are not. I will try to describe in few words what I do, and where problem "attacks". I'm developing application for knowledge assessment (something like complex quizzes) over the Web. I dinamically generate HTML containing <applet>, and pass parameters from JavaScript. So, first, browser parses the HTML, and creates my applet (calls init() etc), and makes it visible. This applet has additional method "public void passData(String data)". Then, at some point later JavaScript calls this method and passes initialization data, based on which I create additional jcomponents in applet. And here is the problem - sometimes, those components are shown, and sometimes, they are not. I even tried to call invalidate() and repaint() after everything is added, and it does not help. Then I went to next question, and back, then next and back - the result is: applet sometimes shows those components, and sometimes not. I tried to reproduce this behavior by using JFrame. I do not know if reasons are the same as in the case of JApplet, but I achieved similiar behavior. This is the code:
    package test;
    import java.awt.BorderLayout;
    import java.awt.Color;
    import java.awt.Dimension;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.WindowConstants;
    public class Main2 extends JFrame {
         public Main2() {
              buildGUI();
         private void buildGUI() {
              this.setPreferredSize(new Dimension(500,300));
              this.getContentPane().setLayout(new BorderLayout());
              JLabel lab = new JLabel("Evil!!!");
              lab.setOpaque(true);
              lab.setBackground(Color.RED);
              this.getContentPane().add(lab,BorderLayout.CENTER);
         public static void main(String[] args) {
              Main2 m = new Main2();
              m.setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
              m.pack();
              m.setVisible(true);
              m.getContentPane().add(new JLabel("Right"),BorderLayout.EAST);
              // m.repaint();
                    // m.invalidate();
    }If you run this program several times, sometimes label "Evil!!!" (red background) will be the only displayed component, and sometimes both components will be displayed (with or without m.repaint() and m.invalidate()). Calling buildGUI() within SwingUtilities.invokeLater(...) instead from constructor directly also does not solve the problem. Also, adding second label ("Right") from SwingUtilities.invokeLater(...) instead directly also does not solve the problem.
    However, if I call m.setVisible(true); after addition of "Right"-label (even if JFrame is already shown by previous m.setVisible(true);), everything works fine.
    In case when "Right"-label is not shown, there is simple action to make is show itself - it is enough to resize window by mouse - "Evil!!!" will be shorten, and "Right" will be shown.
    In case with JApplet, where I can not decide when the browser will show applet, I even created custom jcomponents, and added println-s in paintComponent() to see if this method is called - it is called every time. But component is not shown every time. Could it be that some parent component uses double buffering, and ignores it's children? Those parent components, in my case, are standard swing containers (such as JPanel).
    Help!
    Or to state the problem simply: how to add new components to a container that is already visible, and be sure that added components will actualy be shown?

    Or to state the problem simply: how to add new components to a
    container that is already visible, and be sure that added components will actualy be shown? container.revalidate(); // for a Swing container
    container.validate(); // for an AWT container
    This essentially invokes the LayoutManager so the components can be layed out correctly and repainted.
    Sometimes if you remove and add a component back at the same position you will also need to use repaint(), since the LayoutManager doesn't recognized a change in the layout. But generally you don't need repaint();

  • Slow Model generation

    Hi,
    I experience a bad performance when generate a model:
    Currently I'm waiting more than one hour to add two tables in the model, Guys you need seriously to consider a refactoring of this SQL :
    SELECT
    "Join5"."Ordinal" AS "C1",
    "UnionAll4"."CatalogName" AS "C2",
    "UnionAll4"."SchemaName" AS "C3",
    "UnionAll4"."Name" AS "C4",
    "Join5"."Name1" AS "C5",
    "UnionAll5"."CatalogName" AS "C6",
    "UnionAll5"."SchemaName" AS "C7",
    "UnionAll5"."Name" AS "C8",
    "Join5"."Name2" AS "C9",
    "Extent2"."Name" AS "Name",
    "Extent1"."Id" AS "Id",
    CASE WHEN ("Extent1"."DeleteRule" = 'CASCADE') THEN 1 WHEN ("Extent1"."DeleteRule" <> 'CASCADE') THEN 0 END AS "C10"
    FROM (
    SELECT
    '''' || TABLE_NAME || '_' || CONSTRAINT_NAME || '''' "Id"
    , 'NO ACTION' "UpdateRule"
    , DELETE_RULE "DeleteRule"
    FROM ALL_CONSTRAINTS
    WHERE CONSTRAINT_TYPE = 'R'
    AND OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent1"
    INNER JOIN (
    SELECT
    '''' || con.TABLE_NAME || '_' || con.CONSTRAINT_NAME || '''' "Id"
    , '''' || con.TABLE_NAME || '''' "ParentId"
    , con.CONSTRAINT_NAME "Name"
    , CASE con.CONSTRAINT_TYPE
    WHEN 'P' THEN 'PRIMARY KEY'
    WHEN 'R' THEN 'FOREIGN KEY'
    WHEN 'U' THEN 'UNIQUE'
    WHEN 'C' THEN 'CHECK'
    END "ConstraintType"
    , CASE con.DEFERRABLE WHEN 'NOT DEFERRABLE' THEN 0 ELSE 1 END "IsDeferrable"
    , CASE con.DEFERRED WHEN 'IMMEDIATE' THEN 1 ELSE 0 END "IsInitiallyDeferred"
    FROM ALL_CONSTRAINTS con, ALL_OBJECTS tab
    WHERE con.TABLE_NAME = tab.OBJECT_NAME
    AND tab.OBJECT_TYPE='TABLE' and con.TABLE_NAME IS NOT NULL
    AND tab.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent2" ON "Extent1"."Id" = "Extent2"."Id"
    INNER JOIN (SELECT "UnionAll1"."Ordinal" AS "Ordinal", "UnionAll1"."C1" AS "C11", "UnionAll1"."ConstraintId" AS "ConstraintId", "UnionAll1"."C2" AS "C21", "UnionAll1"."FromColumnId" AS "FromColumnId", "UnionAll1"."C3" AS "C3", "UnionAll1"."ToColumnId" AS "ToColumnId", "Join2"."Id1", "Join2"."UpdateRule", "Join2"."DeleteRule", "Join2"."Id2", "Join2"."ParentId1", "Join2"."Name3", "Join2"."IsDeferrable", "Join2"."IsInitiallyDeferred", "Join2"."ConstraintType", "UnionAll2"."C1" AS "C12", "UnionAll2"."Id" AS "Id3", "UnionAll2"."Name" AS "Name1", "UnionAll2"."C2" AS "C22", "UnionAll2"."ParentId" AS "ParentId2", "UnionAll3"."C1" AS "C13", "UnionAll3"."Id" AS "Id4", "UnionAll3"."Name" AS "Name2"
    FROM (SELECT
    "Extent3"."Ordinal" AS "Ordinal",
    0 AS "C1",
    "Extent3"."ConstraintId" AS "ConstraintId",
    6 AS "C2",
    "Extent3"."FromColumnId" AS "FromColumnId",
    6 AS "C3",
    "Extent3"."ToColumnId" AS "ToColumnId"
    FROM (
    SELECT
    '''' || FK.TABLE_NAME || '_' || FK.CONSTRAINT_NAME || '_' || CAST(FK.POSITION as varchar2(30)) || '''' "Id"
    , '''' || PK.TABLE_NAME || '_' || PK.COLUMN_NAME || '''' "ToColumnId"
    , '''' || FK.TABLE_NAME || '_' || FK.COLUMN_NAME || '''' "FromColumnId"
    , '''' || FK.TABLE_NAME || '_' || FK.CONSTRAINT_NAME || '''' "ConstraintId"
    , FK.POSITION "Ordinal"
    FROM ALL_CONS_COLUMNS FK, ALL_CONSTRAINTS FC, ALL_CONS_COLUMNS PK
    WHERE FK.CONSTRAINT_NAME = FC.CONSTRAINT_NAME AND FC.CONSTRAINT_TYPE = 'R'
    AND PK.CONSTRAINT_NAME = FC.R_CONSTRAINT_NAME AND
    PK.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent3"
    UNION ALL
    SELECT
    "Extent4"."Ordinal" AS "Ordinal",
    9 AS "C1",
    "Extent4"."ConstraintId" AS "ConstraintId",
    10 AS "C2",
    "Extent4"."FromColumnId" AS "FromColumnId",
    10 AS "C3",
    "Extent4"."ToColumnId" AS "ToColumnId"
    FROM (
    SELECT
    CAST(NULL as varchar2(1)) "Id"
    , CAST(NULL as varchar2(1)) "ToColumnId"
    , CAST(NULL as varchar2(1)) "FromColumnId"
    , CAST(NULL as varchar2(1)) "ConstraintId"
    , 0 "Ordinal"
    FROM DUAL
    WHERE 1=2
    ) "Extent4") "UnionAll1"
    INNER JOIN (SELECT "Extent5"."Id" AS "Id1", "Extent5"."UpdateRule" AS "UpdateRule", "Extent5"."DeleteRule" AS "DeleteRule", "Extent6"."Id" AS "Id2", "Extent6"."ParentId" AS "ParentId1", "Extent6"."Name" AS "Name3", "Extent6"."IsDeferrable" AS "IsDeferrable", "Extent6"."IsInitiallyDeferred" AS "IsInitiallyDeferred", "Extent6"."ConstraintType" AS "ConstraintType"
    FROM (
    SELECT
    '''' || TABLE_NAME || '_' || CONSTRAINT_NAME || '''' "Id"
    , 'NO ACTION' "UpdateRule"
    , DELETE_RULE "DeleteRule"
    FROM ALL_CONSTRAINTS
    WHERE CONSTRAINT_TYPE = 'R'
    AND OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent5"
    INNER JOIN (
    SELECT
    '''' || con.TABLE_NAME || '_' || con.CONSTRAINT_NAME || '''' "Id"
    , '''' || con.TABLE_NAME || '''' "ParentId"
    , con.CONSTRAINT_NAME "Name"
    , CASE con.CONSTRAINT_TYPE
    WHEN 'P' THEN 'PRIMARY KEY'
    WHEN 'R' THEN 'FOREIGN KEY'
    WHEN 'U' THEN 'UNIQUE'
    WHEN 'C' THEN 'CHECK'
    END "ConstraintType"
    , CASE con.DEFERRABLE WHEN 'NOT DEFERRABLE' THEN 0 ELSE 1 END "IsDeferrable"
    , CASE con.DEFERRED WHEN 'IMMEDIATE' THEN 1 ELSE 0 END "IsInitiallyDeferred"
    FROM ALL_CONSTRAINTS con, ALL_OBJECTS tab
    WHERE con.TABLE_NAME = tab.OBJECT_NAME
    AND tab.OBJECT_TYPE='TABLE' and con.TABLE_NAME IS NOT NULL
    AND tab.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent6" ON "Extent5"."Id" = "Extent6"."Id" ) "Join2" ON ("UnionAll1"."C1" = 0) AND ("UnionAll1"."ConstraintId" = "Join2"."Id1")
    LEFT OUTER JOIN (SELECT
    6 AS "C1",
    "Extent7"."Id" AS "Id",
    "Extent7"."Name" AS "Name",
    3 AS "C2",
    "Extent7"."ParentId" AS "ParentId"
    FROM (
    SELECT
    '''' || c.TABLE_NAME || '_' || c.COLUMN_NAME || '''' "Id"
    , '''' || c.TABLE_NAME || '''' "ParentId"
    , c.COLUMN_NAME "Name"
    , c.COLUMN_ID "Ordinal"
    , CASE c.NULLABLE WHEN 'Y' THEN 1 ELSE 0 END "IsNullable"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 THEN 'interval year to month'
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 THEN 'interval day to second'
    WHEN INSTR(c.data_type, 'WITH TIME ZONE') != 0 THEN 'timestamp with time zone'
    WHEN INSTR(c.data_type, 'WITH LOCAL TIME ZONE') != 0 THEN 'timestamp with local time zone'
    WHEN INSTR(c.data_type, 'TIMESTAMP') != 0 AND INSTR(c.data_type, 'TIME ZONE') = 0 THEN 'timestamp'
    ELSE LOWER(c.data_type) END) "TypeName"
    , CASE c.data_type
    WHEN 'CHAR' THEN c.char_length
    WHEN 'VARCHAR2' THEN c.char_length
    WHEN 'NCHAR' THEN c.char_length
    WHEN 'NVARCHAR2' THEN c.char_length
    ELSE c.DATA_LENGTH END "MaxLength"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    ELSE c.DATA_PRECISION END) "Precision"
    , c.DATA_PRECISION "DateTimePrecision"
    , c.DATA_SCALE "Scale"
    , CAST(NULL as varchar2(1)) "CollationCatalog"
    , CAST(NULL as varchar2(1)) "CollationSchema"
    , CAST(NULL as varchar2(1)) "CollationName"
    , CAST(NULL as varchar2(1)) "CharacterSetCatalog"
    , CAST(NULL as varchar2(1)) "CharacterSetSchema"
    , c.CHARACTER_SET_NAME "CharacterSetName"
    , 0 "IsMultiSet"
    , 0 "IsIdentity"
    , 0 "IsStoreGenerated"
    , c.DATA_DEFAULT "Default"
    FROM
    ALL_TAB_COLUMNS c, ALL_OBJECTS o
    WHERE o.OBJECT_NAME = c.TABLE_NAME
    AND o.OBJECT_TYPE = 'TABLE'
    AND o.OWNER = c.OWNER
    AND o.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent7"
    UNION ALL
    SELECT
    10 AS "C1",
    "Extent8"."Id" AS "Id",
    "Extent8"."Name" AS "Name",
    12 AS "C2",
    "Extent8"."ParentId" AS "ParentId"
    FROM (
    SELECT
    '''' || c.TABLE_NAME || '_' || c.COLUMN_NAME || '''' "Id"
    , '''' || c.TABLE_NAME || '''' "ParentId"
    , c.COLUMN_NAME "Name"
    , c.COLUMN_ID "Ordinal"
    , CASE c.NULLABLE WHEN 'Y' THEN 1 ELSE 0 END "IsNullable"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 THEN 'interval year to month'
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 THEN 'interval day to second'
    WHEN INSTR(c.data_type, 'WITH TIME ZONE') != 0 THEN 'timestamp with time zone'
    WHEN INSTR(c.data_type, 'WITH LOCAL TIME ZONE') != 0 THEN 'timestamp with local time zone'
    WHEN INSTR(c.data_type, 'TIMESTAMP') != 0 AND INSTR(c.data_type, 'TIME ZONE') = 0 THEN 'timestamp'
    ELSE LOWER(c.data_type) END) "TypeName"
    , CASE c.data_type
    WHEN 'CHAR' THEN c.char_length
    WHEN 'VARCHAR2' THEN c.char_length
    WHEN 'NCHAR' THEN c.char_length
    WHEN 'NVARCHAR2' THEN c.char_length
    ELSE c.DATA_LENGTH END "MaxLength"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    ELSE c.DATA_PRECISION END) "Precision"
    , c.DATA_PRECISION "DateTimePrecision"
    , c.DATA_SCALE "Scale"
    , CAST(NULL as varchar2(1)) "CollationCatalog"
    , CAST(NULL as varchar2(1)) "CollationSchema"
    , CAST(NULL as varchar2(1)) "CollationName"
    , CAST(NULL as varchar2(1)) "CharacterSetCatalog"
    , CAST(NULL as varchar2(1)) "CharacterSetSchema"
    , c.CHARACTER_SET_NAME "CharacterSetName"
    , 0 "IsMultiSet"
    , 0 "IsIdentity"
    , 0 "IsStoreGenerated"
    , c.DATA_DEFAULT "Default"
    FROM ALL_TAB_COLUMNS c, ALL_OBJECTS o
    WHERE o.OBJECT_NAME = c.TABLE_NAME
    AND o.OBJECT_TYPE = 'VIEW'
    AND o.OWNER = c.OWNER
    AND o.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent8") "UnionAll2" ON ("UnionAll1"."C3" = "UnionAll2"."C1") AND ("UnionAll1"."ToColumnId" = "UnionAll2"."Id")
    LEFT OUTER JOIN (SELECT
    6 AS "C1",
    "Extent9"."Id" AS "Id",
    "Extent9"."Name" AS "Name"
    FROM (
    SELECT
    '''' || c.TABLE_NAME || '_' || c.COLUMN_NAME || '''' "Id"
    , '''' || c.TABLE_NAME || '''' "ParentId"
    , c.COLUMN_NAME "Name"
    , c.COLUMN_ID "Ordinal"
    , CASE c.NULLABLE WHEN 'Y' THEN 1 ELSE 0 END "IsNullable"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 THEN 'interval year to month'
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 THEN 'interval day to second'
    WHEN INSTR(c.data_type, 'WITH TIME ZONE') != 0 THEN 'timestamp with time zone'
    WHEN INSTR(c.data_type, 'WITH LOCAL TIME ZONE') != 0 THEN 'timestamp with local time zone'
    WHEN INSTR(c.data_type, 'TIMESTAMP') != 0 AND INSTR(c.data_type, 'TIME ZONE') = 0 THEN 'timestamp'
    ELSE LOWER(c.data_type) END) "TypeName"
    , CASE c.data_type
    WHEN 'CHAR' THEN c.char_length
    WHEN 'VARCHAR2' THEN c.char_length
    WHEN 'NCHAR' THEN c.char_length
    WHEN 'NVARCHAR2' THEN c.char_length
    ELSE c.DATA_LENGTH END "MaxLength"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    ELSE c.DATA_PRECISION END) "Precision"
    , c.DATA_PRECISION "DateTimePrecision"
    , c.DATA_SCALE "Scale"
    , CAST(NULL as varchar2(1)) "CollationCatalog"
    , CAST(NULL as varchar2(1)) "CollationSchema"
    , CAST(NULL as varchar2(1)) "CollationName"
    , CAST(NULL as varchar2(1)) "CharacterSetCatalog"
    , CAST(NULL as varchar2(1)) "CharacterSetSchema"
    , c.CHARACTER_SET_NAME "CharacterSetName"
    , 0 "IsMultiSet"
    , 0 "IsIdentity"
    , 0 "IsStoreGenerated"
    , c.DATA_DEFAULT "Default"
    FROM
    ALL_TAB_COLUMNS c, ALL_OBJECTS o
    WHERE o.OBJECT_NAME = c.TABLE_NAME
    AND o.OBJECT_TYPE = 'TABLE'
    AND o.OWNER = c.OWNER
    AND o.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent9"
    UNION ALL
    SELECT
    10 AS "C1",
    "Extent10"."Id" AS "Id",
    "Extent10"."Name" AS "Name"
    FROM (
    SELECT
    '''' || c.TABLE_NAME || '_' || c.COLUMN_NAME || '''' "Id"
    , '''' || c.TABLE_NAME || '''' "ParentId"
    , c.COLUMN_NAME "Name"
    , c.COLUMN_ID "Ordinal"
    , CASE c.NULLABLE WHEN 'Y' THEN 1 ELSE 0 END "IsNullable"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 THEN 'interval year to month'
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 THEN 'interval day to second'
    WHEN INSTR(c.data_type, 'WITH TIME ZONE') != 0 THEN 'timestamp with time zone'
    WHEN INSTR(c.data_type, 'WITH LOCAL TIME ZONE') != 0 THEN 'timestamp with local time zone'
    WHEN INSTR(c.data_type, 'TIMESTAMP') != 0 AND INSTR(c.data_type, 'TIME ZONE') = 0 THEN 'timestamp'
    ELSE LOWER(c.data_type) END) "TypeName"
    , CASE c.data_type
    WHEN 'CHAR' THEN c.char_length
    WHEN 'VARCHAR2' THEN c.char_length
    WHEN 'NCHAR' THEN c.char_length
    WHEN 'NVARCHAR2' THEN c.char_length
    ELSE c.DATA_LENGTH END "MaxLength"
    , (CASE WHEN INSTR(c.data_type, 'INTERVAL YEAR') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    WHEN INSTR(c.data_type, 'INTERVAL DAY') != 0 AND c.DATA_PRECISION < c.DATA_SCALE THEN c.DATA_SCALE
    ELSE c.DATA_PRECISION END) "Precision"
    , c.DATA_PRECISION "DateTimePrecision"
    , c.DATA_SCALE "Scale"
    , CAST(NULL as varchar2(1)) "CollationCatalog"
    , CAST(NULL as varchar2(1)) "CollationSchema"
    , CAST(NULL as varchar2(1)) "CollationName"
    , CAST(NULL as varchar2(1)) "CharacterSetCatalog"
    , CAST(NULL as varchar2(1)) "CharacterSetSchema"
    , c.CHARACTER_SET_NAME "CharacterSetName"
    , 0 "IsMultiSet"
    , 0 "IsIdentity"
    , 0 "IsStoreGenerated"
    , c.DATA_DEFAULT "Default"
    FROM ALL_TAB_COLUMNS c, ALL_OBJECTS o
    WHERE o.OBJECT_NAME = c.TABLE_NAME
    AND o.OBJECT_TYPE = 'VIEW'
    AND o.OWNER = c.OWNER
    AND o.OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent10") "UnionAll3" ON ("UnionAll1"."C2" = "UnionAll3"."C1") AND ("UnionAll1"."FromColumnId" = "UnionAll3"."Id") ) "Join5" ON (0 = "Join5"."C11") AND ("Extent1"."Id" = "Join5"."ConstraintId") AND ("Join5"."Id1" = "Extent1"."Id")
    LEFT OUTER JOIN (SELECT
    3 AS "C1",
    "Extent11"."Id" AS "Id",
    "Extent11"."Name" AS "Name",
    "Extent11"."CatalogName" AS "CatalogName",
    "Extent11"."SchemaName" AS "SchemaName"
    FROM (
    SELECT
    '''' || TABLE_NAME || '''' "Id"
    , CAST(NULL as varchar2(1)) "CatalogName"
    , OWNER "SchemaName"
    , TABLE_NAME "Name"
    FROM ALL_TABLES
    WHERE OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent11"
    UNION ALL
    SELECT
    12 AS "C1",
    "Extent12"."Id" AS "Id",
    "Extent12"."Name" AS "Name",
    "Extent12"."CatalogName" AS "CatalogName",
    "Extent12"."SchemaName" AS "SchemaName"
    FROM (
    SELECT
    '''' || VIEW_NAME || '''' "Id"
    , CAST(NULL as varchar2(1)) "CatalogName"
    , OWNER "SchemaName"
    , VIEW_NAME "Name"
    , TEXT "ViewDefinition"
    , CASE VIEW_TYPE WHEN 'MATERIALIZED' THEN 1 ELSE 0 END "IsUpdatable"
    FROM ALL_VIEWS
    WHERE OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent12") "UnionAll4" ON ("Join5"."C22" = "UnionAll4"."C1") AND ("Join5"."ParentId2" = "UnionAll4"."Id")
    LEFT OUTER JOIN (SELECT
    3 AS "C1",
    "Extent13"."Id" AS "Id",
    "Extent13"."Name" AS "Name",
    "Extent13"."CatalogName" AS "CatalogName",
    "Extent13"."SchemaName" AS "SchemaName"
    FROM (
    SELECT
    '''' || TABLE_NAME || '''' "Id"
    , CAST(NULL as varchar2(1)) "CatalogName"
    , OWNER "SchemaName"
    , TABLE_NAME "Name"
    FROM ALL_TABLES
    WHERE OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent13"
    UNION ALL
    SELECT
    12 AS "C1",
    "Extent14"."Id" AS "Id",
    "Extent14"."Name" AS "Name",
    "Extent14"."CatalogName" AS "CatalogName",
    "Extent14"."SchemaName" AS "SchemaName"
    FROM (
    SELECT
    '''' || VIEW_NAME || '''' "Id"
    , CAST(NULL as varchar2(1)) "CatalogName"
    , OWNER "SchemaName"
    , VIEW_NAME "Name"
    , TEXT "ViewDefinition"
    , CASE VIEW_TYPE WHEN 'MATERIALIZED' THEN 1 ELSE 0 END "IsUpdatable"
    FROM ALL_VIEWS
    WHERE OWNER IN (SYS_CONTEXT('USERENV', 'CURRENT_USER'))
    ) "Extent14") "UnionAll5" ON (3 = "UnionAll5"."C1") AND ("Extent2"."ParentId" = "UnionAll5"."Id")
    WHERE (((("UnionAll5"."SchemaName" LIKE :p0) AND ("UnionAll5"."Name" LIKE :p1)) OR (("UnionAll5"."SchemaName" LIKE :p2) AND ("UnionAll5"."Name" LIKE :p3)) OR (("UnionAll5"."SchemaName" LIKE :p4) AND ("UnionAll5"."Name" LIKE :p5)) OR (("UnionAll5"."SchemaName" LIKE :p6) AND ("UnionAll5"."Name" LIKE :p7)) OR (("UnionAll5"."SchemaName" LIKE :p8) AND ("UnionAll5"."Name" LIKE :p9)) OR (("UnionAll5"."SchemaName" LIKE :p10) AND ("UnionAll5"."Name" LIKE :p11)) OR (("UnionAll5"."SchemaName" LIKE :p12) AND ("UnionAll5"."Name" LIKE :p13)) OR (("UnionAll5"."SchemaName" LIKE :p14) AND ("UnionAll5"."Name" LIKE :p15)) OR (("UnionAll5"."SchemaName" LIKE :p16) AND ("UnionAll5"."Name" LIKE :p17))) AND ((("UnionAll4"."SchemaName" LIKE :p18) AND ("UnionAll4"."Name" LIKE :p19)) OR (("UnionAll4"."SchemaName" LIKE :p20) AND ("UnionAll4"."Name" LIKE :p21)) OR (("UnionAll4"."SchemaName" LIKE :p22) AND ("UnionAll4"."Name" LIKE :p23)) OR (("UnionAll4"."SchemaName" LIKE :p24) AND ("UnionAll4"."Name" LIKE :p25)) OR (("UnionAll4"."SchemaName" LIKE :p26) AND ("UnionAll4"."Name" LIKE :p27)) OR (("UnionAll4"."SchemaName" LIKE :p28) AND ("UnionAll4"."Name" LIKE :p29)) OR (("UnionAll4"."SchemaName" LIKE :p30) AND ("UnionAll4"."Name" LIKE :p31)) OR (("UnionAll4"."SchemaName" LIKE :p32) AND ("UnionAll4"."Name" LIKE :p33)) OR (("UnionAll4"."SchemaName" LIKE :p34) AND ("UnionAll4"."Name" LIKE :p35))))
    the database has around 400 tables and there are statistics. The execution plan is insane.
    The DB version is 11.2.0.1.0

    OS Windows 7 64 bit and Visual Studio 2010 Ultimate edition with SP1 beta.
    I don't understand why this problem is related to dev tool or OS.
    Because if I execute entity framework schema sql with sqldeveloper I don't get results quickly.
    Same long response time.
    Oracle server version : Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 64bit
    Here is your requested information :
    Microsoft Visual Studio 2010
    Version 10.0.31118.1 SP1Rel
    Microsoft .NET Framework
    Version 4.0.30319 SP1Rel
    Installed Version: Ultimate
    Microsoft Office Developer Tools 01019-532-2002102-70600
    Microsoft Office Developer Tools
    Microsoft Visual Basic 2010 01019-532-2002102-70600
    Microsoft Visual Basic 2010
    Microsoft Visual C# 2010 01019-532-2002102-70600
    Microsoft Visual C# 2010
    Microsoft Visual C++ 2010 01019-532-2002102-70600
    Microsoft Visual C++ 2010
    Microsoft Visual F# 2010 01019-532-2002102-70600
    Microsoft Visual F# 2010
    Microsoft Visual Studio 2010 Architecture and Modeling Tools 01019-532-2002102-70600
    Microsoft Visual Studio 2010 Architecture and Modeling Tools
    UML® and Unified Modeling Language™ are trademarks or registered trademarks of the Object Management Group, Inc. in the United States and other countries.
    Microsoft Visual Studio 2010 Code Analysis Spell Checker 01019-532-2002102-70600
    Microsoft Visual Studio 2010 Code Analysis Spell Checker
    Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
    The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
    Microsoft Visual Studio 2010 Team Explorer 01019-532-2002102-70600
    Microsoft Visual Studio 2010 Team Explorer
    Microsoft Visual Web Developer 2010 01019-532-2002102-70600
    Microsoft Visual Web Developer 2010
    Crystal Reports Templates for Microsoft Visual Studio 2010
    Crystal Reports Templates for Microsoft Visual Studio 2010
    Devart dotConnect for Oracle 5.70.190.0
    Devart dotConnect for Oracle
    Copyright 2002 - 2010 Devart. All rights reserved.
    Web: www.devart.com/dotconnect/oracle
    Support: [email protected]
    Devart Entity Developer 2.80.167.0
    Devart Entity Developer
    Copyright © 2008-2010 Devart. All rights reserved.
    Web: www.devart.com/entitydeveloper
    Support: [email protected]
    Microsoft Package Manager 1.0
    Package Manager in Visual Studio
    Microsoft Visual Studio 2010 SharePoint Developer Tools 10.0.31118
    Microsoft Visual Studio 2010 SharePoint Developer Tools
    Microsoft Visual Studio 2010 Ultimate - ENU Service Pack 1 (KB983509) KB983509
    This service pack is for Microsoft Visual Studio 2010 Ultimate - ENU.
    If you later install a more recent service pack, this service pack will be uninstalled automatically.
    For more information, visit http://support.microsoft.com/kb/983509.
    Oracle Developer Tools for Visual Studio 11.2.0.2.30
    Oracle Developer Tools for Visual Studio Copyright (c) 2005, 2011
    Update for Microsoft Visual Studio 2010 Ultimate - ENU (KB2483190) KB2483190
    This update is for Microsoft Visual Studio 2010 Ultimate - ENU.
    If you later install a more recent service pack, this update will be uninstalled automatically.
    For more information, visit http://support.microsoft.com/kb/2483190.

  • Removing iTunes supplied artist album artwork from iTunes

    Recently bought a new iPhone 5S and am now using it to store my music instead of my iPod Touch.
    All my music is in a self-made directory in Apple Lossless, so I manually transfer/have iTunes auto convert all the songs onto my phone.
    Everything seems to be working fine, however, for the 5 or 6 songs I bought on iTunes in my life (and no longer have any of the songs), iTunes has somehow taken the album art from those old albums and applied them to my new songs via artist association, and i'm not sure how to get rid of them.
    For example, say I bought Michael Jackson's Thriller album. I don't have the Thriller album on my music collection, but instead bought the Best Of CD and made rips of that. When I load the Best Of into my phone, going to the music app and browse to Michael Jackson, instead of showing no album art, it shows the art for Thriller. So somewhere iTunes is storing album art for downloaded music, and auto-associating them with the artists in general, regardless if the album is there or not...
    Edit: Just to note I do not use any album art at all, so the ultimate goal is to have zero album art for anything. Also, yes, I did check individual tracks for album art, every music track on my iPhone has no embedded album art.

    sbeachi,
    Welcome to the forums! I have not been able to find a way to have just the Album artwork update. You can try removing then re-adding the album/Songs through iTunes, for that is the way I was able to add artwork for my music that didn't sync correctly.
    Hope that helps,
    Weston

  • Values are fine on my CR developer desktop but become all zeroes when ran in the Crystal Viewer

    Post Author: RobertICBC
    CA Forum: Data Connectivity and SQL
    I am using CR v. 11.5 and have developed a report using an Oracle table as a datasource. The table is small with a lot of summary data. I have used a number of running totals for display fields. There is also a chart that displays totals over time. My problem is that the report displays all the correct values when I preview the report in the Crystal Designer but when I save it to the Crystal Server development environment and run it with the same parameters, I get zero values for all fields. The chart however appears as it does in developer. Anybody run into a similar problem.

    Post Author: yangster
    CA Forum: Data Connectivity and SQL
    are you publishing this to a bo xi r2 server?are you using the same datasource in both enviroments?do you get any results for any parameters not just the ones you've been testing with?

  • Installing developer 6i on Windows Vista Ultimate

    Hello everybody,
    I tried to install Developer 6i on Windows Vista Ultimate, know if there are any patch or something like that?
    When you do not have the install path in the regedit. And I lose all the icons in my applications.
    Please I need help,
    Miguel

    Forms 6i installed and running on Windows Vista

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

Maybe you are looking for