Catalyst 2960 Problem with Cisco SPA512

Hi there,
I hope someone can help me.
I don't have much experience with switches, I'm doing the desktop support in our company.
We have Catalyst 4510 R+E to 2 Catalyst 2960 switches and seperate VLAN's for IP Phones and for Internet in one part of our office.
Now I'm running into trouble with some IP Phones that are connected to the 2960 switches. It appears only to happen with Cisco's SPA-512. I've tried FW 7.5.2, 7.5.5 and 7.5.5b. These phones sporadically drop the call / connection, with the red MIC button blinking. Based on my research this means that it looses Internet connection. I have 1 SPA512 with FW 7.5.1 that does not show these symptoms.
I have other phones SPA942 and Polycom IP335 in the same area behind the same switches and no issues.
We've tried to disable auto negotiate and set a fixed transmition rate or either 1Gbps and 100Mbps, both without success.
I also have SPA512 in other areas of the office just connected to our Catalyst 4510 R+E and they work just fine. That's why I don't believe it has anything to do with the 4510, but I can be wrong.
That's all I have for you guys. Hope someone can help me to fix / troubleshoot this..
Frank

SSwitch3#test cable-diagnostics tdr int g1/0/16
TDR test started on interface Gi1/0/16
A TDR test can take a few seconds to run on an interface
Use 'show cable-diagnostics tdr' to read the TDR results.
SSwitch3#show cable-diagnostics tdr int g1/0/16
TDR test last run on: June 27 13:39:21
Interface Speed Local pair Pair length        Remote pair Pair status
Gi1/0/16  1000M Pair A     52   +/- 10 meters Pair A      Normal
                Pair B     52   +/- 10 meters Pair B      Normal
                Pair C     52   +/- 10 meters Pair C      Normal
                Pair D     52   +/- 10 meters Pair D      Normal
SSwitch3#

Similar Messages

  • NTP Service on Domain Controller have problem with cisco switch

    Hello!
    I  have Windows Server 2008 R2 SP1 Domain Controller with NTP services
    The windows opertion system clients get NTP time ok.
    There are problem with cisco switch, can't get time from NTP.
    Can anybody help me to fix problem?
    C:\Users\Sysuser>w32tm /query /configuration
    [Configuration]
    EventLogFlags: 2 (Local)
    AnnounceFlags: 5 (Local)
    TimeJumpAuditOffset: 28800 (Local)
    MinPollInterval: 6 (Local)
    MaxPollInterval: 10 (Local)
    MaxNegPhaseCorrection: 1800 (Local)
    MaxPosPhaseCorrection: 1800 (Local)
    MaxAllowedPhaseOffset: 300 (Local)
    FrequencyCorrectRate: 4 (Local)
    PollAdjustFactor: 5 (Local)
    LargePhaseOffset: 50000000 (Local)
    SpikeWatchPeriod: 900 (Local)
    LocalClockDispersion: 10 (Local)
    HoldPeriod: 5 (Local)
    PhaseCorrectRate: 7 (Local)
    UpdateInterval: 100 (Local)
    [TimeProviders]
    NtpClient (Local)
    DllName: C:\Windows\system32\w32time.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    ResolvePeerBackoffMinutes: 15 (Policy)
    ResolvePeerBackoffMaxTimes: 7 (Policy)
    CompatibilityFlags: 2147483648 (Local)
    EventLogFlags: 0 (Policy)
    LargeSampleSkew: 3 (Local)
    SpecialPollInterval: 3600 (Policy)
    Type: NTP (Policy)
    NtpServer: 10.7.0.4 (Policy)
    NtpServer (Local)
    DllName: C:\Windows\system32\w32time.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 0 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    VMICTimeProvider (Local)
    DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    Cisco config and errors
    CISCO1#show ntp ass det
    10.7.0.7 configured, insane, invalid, stratum 3
    ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
    our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
    root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
    delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
    precision 2**6, version 3
    org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
    rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
    xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
    filtdelay =     6.06    5.87    3.23    7.90    6.41    5.17   13.03    3.43
    filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
    filterror =     0.02   15.64   31.27   46.89   62.52   78.14   93.75   93.78

    Hi,
     >>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
    Based on your description, we can try to grant this account Allow log on locally
    user right in the default domain controller policy to see if it helps.
    The policy setting is:
    Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
    Allow log on locally
    http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • Window 8 WiFi problem with Cisco wireless network

    Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
    We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
    Sent from Cisco Technical Support iPad App

    This problem occurred with Soney, and Dell models.  Lenovo with Windows 8 factory installed is working fine.
    Won't make any difference as these laptop's wireless NIC cards are different.
    Can you try with OPEN authentication.  If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
    I'm with Scott here:  It's got to be a wireless NIC card driver.
    As what George has stated, post the debug of the failed attempts.

  • Problem with Cisco Catalyst 2960

    I've got a problem with the Catalyst 2960 / 24TCL switch. The Flash-directory was empty. After I copy with xmodem the firmware bin-file into the flash-directory and installed it .. I miss the HTML-Directory. Can somebody tell me how I can get it back?
     

    SSwitch3#test cable-diagnostics tdr int g1/0/16
    TDR test started on interface Gi1/0/16
    A TDR test can take a few seconds to run on an interface
    Use 'show cable-diagnostics tdr' to read the TDR results.
    SSwitch3#show cable-diagnostics tdr int g1/0/16
    TDR test last run on: June 27 13:39:21
    Interface Speed Local pair Pair length        Remote pair Pair status
    Gi1/0/16  1000M Pair A     52   +/- 10 meters Pair A      Normal
                    Pair B     52   +/- 10 meters Pair B      Normal
                    Pair C     52   +/- 10 meters Pair C      Normal
                    Pair D     52   +/- 10 meters Pair D      Normal
    SSwitch3#

  • Problem with Cisco 4507R

    Dear Experts,
    My switch running is normal but suddenly it has problem with red light(Output fail) as attached file.
    I also try reboot but seem to switch can not
    There is output while switch reboot:
    * Welcome to Rom Monitor for WS-X45-SUP6-E System.      *
    * Copyright (c) 2003-2009 by Cisco Systems, Inc.         *
    * All rights reserved.                                   *
    Flash die # 0: Intel 33554432Bytes
    Flash die # 1: Intel 33554432Bytes
    Flash die # 2: Intel 33554432Bytes
    Flash die # 3: Intel 33554432Bytes
    Determining FTL format status of volume.
    Volume is FTL formatted.
    Checking the partition table and boot sector...
    Checking FAT, Files and Directories...
    Reclaiming unused space...
    Updating FAT...
    Rom Monitor Program Version 12.2(44r)SG5
    CPU Rev: 2.1, Board Rev: 6, Board Type: 10, CPLD Jawa Rev: 18
    Chassis: WS-C4507R-E
    Front Panel Phy is Bcm5482s
    Got Mac Address: 00:25:84:1e:33:bc
    MAC Address  : 00-25-84-1e-33-bc
    Ip Address   : Not set.
    Netmask      : Not set.
    Gateway      : Not set.
    TftpServer   : Not set.
    ***** The system will autoboot in 5 seconds *****
    Type control-C to prevent autobooting.
    ******** The system will autoboot now ********
    config-register = 0x2101
    Autobooting using the first file from bootflash.....
    Rommon reg: 0x00004380
    Reset2Reg: 0x00000FFF
    Darkside controller 0x0B394EBC..0x0B3A326E original size:0x00012092#
    Tatooine controller 0x0B3A326F..0x0B40C25B original size:0x00094F89##
    Forerunner controller 0x0B40C25C..0x0B4D1EA8 original size:0x001D0F9C
    diagsk5 version 3.2_a
    prod: WS-X45-SUP6-E part: 73-10597-12 serial: JAE14190WMV
    Power-on-self-test for Module 3: WS-X45-SUP6-E
    Test Status: (. = Pass, F = Fail, U = Untested)
    CPU Subsystem Tests ...
    seeprom: Pass
    Traffic: L3 Looopback ...
    Test Results: Pass
    Traffic: L2 Loopback ...
    Test Results: Pass
    Switching Subsystem Memory ...
    Packet Memory Test Results: Pass
    Module 3 Passed
    Exiting to ios...
    Rommon reg: 0x00000380
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASE-M), Version 12.2(50)SG3, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Tue 07-Jul-09 20:28 by prod_rel_team
    Image text-base: 0x10000000, data-base: 0x1222AE9C
    Any help are appreciated
    Thanks & Regards,

    Hi,
    See this:
    Table A-8     1400 W AC-Input Power Supply LEDs
    LED
    Meaning
    INPUT OK
    •Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.)
    •Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off.
    FAN OK
    •Green—Power supply fan is operating properly.
    •Off—Power supply fan failure is detected.
    OUTPUT FAIL
    •Red—Problem with one or more of the DC-output voltages of the power supply is detected.
    •Off—DC-output voltage with acceptable margins.
    Note For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray assembly and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray assembly, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal.
    http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/catalyst4500e/installation/guide/0aspecs.html#wp1047656
    Hope it helps.

  • Cisco Catalyst 2960-X and Cisco Prime compatibility

    Hello All,
    I had review all the compatibility matrix of versions of Cisco Prime 1.2, 1.4 and 2.0, and just can't find the Cisco Catalyst 2960-X series as a listed device, which really surprises me.
    Can you clear that out??
    Thanks,

    The 2960X (and XR) support was added with Device Pack 2 for PI 2.0. It was released on 22 January 2014 and is available here.
    (PI 2.1 won't be out until later this year, release date not yet announced.)
    Following are the 2960X/XR types added:
    Cisco Catalyst 2960-X Series Switches
    Device Type
    SYSOIDS
    S/W Version
    Software
    Cisco Catalyst 2960X-24TS-L Switch
    OID:1.3.6.1.4.1.9.1.1699
    >=12.1
    IOS
    Cisco Catalyst 2960X-48FPD-L Switch
    OID:1.3.6.1.4.1.9.1.1690
    >=12.1
    IOS
    Cisco Catalyst 2960X-48LPD-L Switch
    OID:1.3.6.1.4.1.9.1.1691
    >=12.1
    IOS
    Cisco Catalyst 2960X-48TD-L Switch
    OID:1.3.6.1.4.1.9.1.1692
    >=12.1
    IOS
    Cisco Catalyst 2960X-24PD-L Switch
    OID:1.3.6.1.4.1.9.1.1693
    >=12.1
    IOS
    Cisco Catalyst 2960X-24TD-L Switch
    OID:1.3.6.1.4.1.9.1.1694
    >=12.1
    IOS
    Cisco Catalyst 2960X-48FPS-L Switch
    OID:1.3.6.1.4.1.9.1.1695
    >=12.1
    IOS
    Cisco Catalyst 2960X-48LPS-L Switch
    OID:1.3.6.1.4.1.9.1.1696
    >=12.1
    IOS
    Cisco Catalyst 2960X-24PS-L Switch
    OID:1.3.6.1.4.1.9.1.1697
    >=12.1
    IOS
    Cisco Catalyst 2960X-48TS-L Switch
    OID:1.3.6.1.4.1.9.1.1698
    >=12.1
    IOS
    Cisco Catalyst 2960X-24PSK-L Switch
    OID:1.3.6.1.4.1.9.1.1700
    >=12.1
    IOS
    Cisco Catalyst 2960X-48LPS-S Switch
    OID:1.3.6.1.4.1.9.1.1701
    >=12.1
    IOS
    Cisco Catalyst 2960X-24PS-S Switch
    OID:1.3.6.1.4.1.9.1.1702
    >=12.1
    IOS
    Cisco Catalyst 2960X-48TS-LL Switch
    OID:1.3.6.1.4.1.9.1.1703
    >=12.1
    IOS
    Cisco Catalyst 2960X-24TS-LL Switch
    OID:1.3.6.1.4.1.9.1.1704
    >=12.1
    IOS
    Cisco Catalyst 2960-XR Series Switches
    Device Type
    SYSOIDS
    S/W Version
    Software
    Cisco Catalyst 2960XR-48FPD-I Switch
    OID:1.3.6.1.4.1.9.1.1797
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48LPD-I Switch
    OID:1.3.6.1.4.1.9.1.1798
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48TD-I Switch
    OID:1.3.6.1.4.1.9.1.1799
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24PD-I Switch
    OID:1.3.6.1.4.1.9.1.1800
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24TD-I Switch
    OID:1.3.6.1.4.1.9.1.1801
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48FPS-I Switch
    OID:1.3.6.1.4.1.9.1.1802
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48LPS-I Switch
    OID:1.3.6.1.4.1.9.1.1803
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48TS-I Switch
    OID:1.3.6.1.4.1.9.1.1804
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24PS-I Switch
    OID:1.3.6.1.4.1.9.1.1805
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24TS-I Switch
    OID:1.3.6.1.4.1.9.1.1806
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48FPD-L Switch
    OID:1.3.6.1.4.1.9.1.1807
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48LPD-L Switch
    OID:1.3.6.1.4.1.9.1.1808
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48TD-L Switch
    OID:1.3.6.1.4.1.9.1.1809
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24PD-L Switch
    OID:1.3.6.1.4.1.9.1.1810
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24TD-L Switch
    OID:1.3.6.1.4.1.9.1.1811
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48FPS-L Switch
    OID:1.3.6.1.4.1.9.1.1812
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48LPS-L Switch
    OID:1.3.6.1.4.1.9.1.1813
    >=12.1
    IOS
    Cisco Catalyst 2960XR-48TS-L Switch
    OID:1.3.6.1.4.1.9.1.1814
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24PS-L Switch
    OID:1.3.6.1.4.1.9.1.1815
    >=12.1
    IOS
    Cisco Catalyst 2960XR-24TS-L Switch
    OID:1.3.6.1.4.1.9.1.1816
    >=12.1
    IOS

  • Problems with Cisco AnyConnect Secure Mobility Client 3.1

    Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
    The service does not start correctly anymore. I tried reinstabut no help.
    Could anyone help me please?
    Here my logs.
    Thank you very much.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnva
    Description : Function: CInstaller::PerformAction
    File: .\VACon.cpp
    Line: 522
    Successfully installed service acsock
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpninstall
    Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
    File: .\Xml\XmlLocalACPolMgr.cpp
    Line: 415
    Local Security Policy file already exists and therefore will not be generated
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F84) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F20) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
    Date        : 07/23/2013
    Time        : 08:49:49
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x000016C0) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:10
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F34) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:19
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:20
    Type        : Information
    Source      : acvpnui
    Description : Initializing vpnapi version 3.1.04059 ().
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getCurrentState
    File: .\ClientIfcBase.cpp
    Line: 2058
    API service not ready
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.nam.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: L2Api::attach
    File: .\L2Api.cpp
    Line: 87
    The NAM/L2 Api could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.websecurity.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: SSApi::attach
    File: ..\common\SSApi.cpp
    Line: 51
    The Web Security API could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Error
    Source      : acvpnui
    Description : Function: MFDartBox::getDARTInstallDir
    File: .\MFDartBox.cpp
    Line: 332
    Invoked Function: MsiEnumProductsExW
    Return Code: 259 (0x00000103)
    Description: No more data is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getStats
    File: .\ClientIfcBase.cpp
    Line: 1723
    Called when API service not ready.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CSocketTransport::connectTransport
    File: .\IPC\SocketTransport.cpp
    Line: 981
    Invoked Function: ::WSAConnect
    Return Code: 10061 (0x0000274D)
    Description: No connection could be made because the target machine actively refused it.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::connectIpc
    File: .\IPC\IPCTransport.cpp
    Line: 252
    Invoked Function: CSocketTransport::connectTransport
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::terminateIpcConnection
    File: .\IPC\IPCTransport.cpp
    Line: 404
    Invoked Function: CSocketTransport::writeSocketBlocking
    Return Code: -31588319 (0xFE1E0021)
    Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initIpc
    File: .\ApiIpc.cpp
    Line: 423
    Invoked Function: CIpcTransport::connectIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initiateAgentConnection
    File: .\ApiIpc.cpp
    Line: 336
    Invoked Function: ApiIpc::initIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::run
    File: .\ApiIpc.cpp
    Line: 570
    Invoked Function: ApiIpc::initiateAgentConnection
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ClientIfcBase::attach
    File: .\ClientIfcBase.cpp
    Line: 606
    Client failed to attach.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: CMainFrame::OnCreate
    File: .\mainfrm.cpp
    Line: 342
    Invoked Function: The VPN service is not responding or available.
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Function: ClientIfcBase::detach
    File: .\ClientIfcBase.cpp
    Line: 438
    Shutting down vpnapi
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: ConnectMgr::activateConnectEvent
    File: .\ConnectMgr.cpp
    Line: 1352
    NULL object. Cannot establish a connection at this time.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x0000162C) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkP

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Problem with Cisco 861W router and outgoing VPN

    We have a Cisco 861W router that is blocking an outgoing PPTP on the internal access point only. The outgoing VPN works when the traffic is through a wired connection or the connection is on another access point. We fail to make a connection only when connection to the 861W's internal Access Point.
    Here is the Access Point Configuration:
    Current configuration : 2100 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname obap
    enable secret 5 $1$.1RF$go1D7WITXUn3s8TUaw3tC.
    no aaa new-model
    dot11 syslog
    dot11 ssid OLIVER
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 0 XXXXXXXXXXX
    username XXXXXX privilege 15 secret 5 $1$Wc0K$OzcQDDQfjHP6La31eXMoG/
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm tkip
    ssid OLIVER
    antenna gain 0
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    description the embedded AP GigabitEthernet 0 is an internal interface connecti
    ng AP with the host router
    no ip address
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.0.2 255.255.255.0
    no ip route-cache
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    bridge 1 route ip
    banner login ^CC
    % Password change notice.
    Default username/password setup on AP is cisco/cisco with priv¾ilege level 15.
    It is strongly suggested that you create a new username with privilege level
    15 using the following command for console security.
    username <myuser> privilege 15 secret 0 <mypassword>
    no username cisco
    Replace <myuser> and <mypassword> with the username and password you want to
    use. After you change your username/password you can turn off this message
    by configuring  "no banner login" and "no banner exec" in privileged mode.
    ^C
    line con 0
    privilege level 15
    login local
    no activation-character
    line vty 0 4
    login local
    cns dhcp
    end
    obap#
    Here is the Router's Configuration:
    Current configuration : 5908 bytes
    ! No configuration change since last restart
    version 15.0
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    hostname obrouter
    boot-start-marker
    boot-end-marker
    logging buffered 51200
    logging console critical
    enable secret 5 $1$i9XE$DjxFVAEC9nC4/r6EQKCd6/
    no aaa new-model
    memory-size iomem 10
    clock timezone PCTime -5
    clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00
    crypto pki trustpoint TP-self-signed-1856757619
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1856757619
    revocation-check none
    rsakeypair TP-self-signed-1856757619
    crypto pki certificate chain TP-self-signed-1856757619
    certificate self-signed 01
      3082024D 308201B6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 31383536 37353736 3139301E 170D3036 30313032 31323030
      34345A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38353637
      35373631 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100B1A4 FB786547 3D582260 03DB768D 116BDE9A 309FBA04 B53F77B0 BFE32344
      7C3439B3 97192B36 760A9411 1D5C7549 8D86F532 ABA44F53 0D08B7F4 A9A747D5
      071330C3 65BF25A8 927F3596 29BB5A80 90C8D169 22268476 3B8DDE1E FDB7170D
      B4820D03 5580A849 A92C7E76 9AC10867 505A2FEE 64360741 7F9DBDBF 3D79982C
      F81D0203 010001A3 75307330 0F060355 1D130101 FF040530 030101FF 30200603
      551D1104 19301782 156F6272 6F757465 722E6272 75736868 6F672E63 6F6D301F
      0603551D 23041830 168014D8 5BC2FFB2 967A4C7B 11B44122 5C8D31F7 749B9230
      1D060355 1D0E0416 0414D85B C2FFB296 7A4C7B11 B441225C 8D31F774 9B92300D
      06092A86 4886F70D 01010405 00038181 005901F1 C239074B B8213567 CF7B65BF
      DAFE4557 69B2A3B1 5F2593C7 A54B9598 23FD5E7A 563AA6E0 AFB25801 FA0061E8
      F9545372 DB600B3A BE68AE65 1EDA593E 6A0C96B8 5A4136AF 393F9AAC 651E1C36
      B8B7C6C0 47936C24 D2ECE9A5 9446EE32 FC7461FA AD8CF1CE A7FBF341 07E9C3C6
      505AB88D 0E7FCAFC 5792298A E5E4D1FE CC
            quit
    no ip source-route
    ip dhcp excluded-address 192.168.0.1 192.168.0.99
    ip dhcp pool ccp-pool1
       import all
       network 192.168.0.0 255.255.255.0
       dns-server 216.49.160.10 216.49.160.66
       default-router 192.168.0.1
    ip cef
    no ip bootp server
    ip domain name brushhog.com
    ip name-server 216.49.160.10
    ip name-server 216.49.160.66
    license udi pid CISCO861W-GN-A-K9 sn FTX155281FY
    username tech38 privilege 15 secret 5 $1$d/4Z$n/23EsXbzfHF5XfJ8Nv.y0
    ip tcp synwait-time 10
    ip ssh time-out 60
    ip ssh authentication-retries 2
    interface FastEthernet0
    interface FastEthernet1
    interface FastEthernet2
    interface FastEthernet3
    interface FastEthernet4
    description $ES_WAN$$FW_OUTSIDE$
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    duplex auto
    speed auto
    pppoe-client dial-pool-number 1
    interface wlan-ap0
    description Service module interface to manage the embedded AP
    ip unnumbered Vlan1
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    arp timeout 0
    interface Wlan-GigabitEthernet0
    description Internal switch interface connecting to the embedded AP
    interface Vlan1
    description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$
    ip address 192.168.0.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    ip tcp adjust-mss 1412
    interface Dialer0
    ip address negotiated
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1452
    ip flow ingress
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname XXXXXXXXXXXXX
    ppp chap password 7 XXXXXXXXXXXXXXXX
    ppp pap sent-username XXXXXXXXXXXXXX password 7 XXXXXXXXXXX
    no cdp enable
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source static tcp 192.168.0.25 80 interface Dialer0 80
    ip nat inside source list 1 interface Dialer0 overload
    ip route 0.0.0.0 0.0.0.0 Dialer0
    logging trap debugging
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark CCP_ACL Category=2
    access-list 1 permit 192.168.0.0 0.0.0.255
    dialer-list 1 protocol ip permit
    no cdp run
    control-plane
    banner exec ^C
    % Password expiration warning.
    Cisco Configuration Professional (Cisco CP) is installed on this device
    and it provides the default username "cisco" for  one-time use. If you have
    already used the username "cisco" to login to the router and your IOS image
    supports the "one-time" user option, then this username has already expired.
    You will not be able to login to the router with this username after you exit
    this session.
    It is strongly suggested that you create a new username with a privilege level
    of 15 using the following command.
    username <myuser> privilege 15 secret 0 <mypassword>
    Replace <myuser> and <mypassword> with the username and password you
    want to use.
    ^C
    banner login ^CAuthorized access only!
    Disconnect IMMEDIATELY if you are not an authorized user!^C
    line con 0
    login local
    no modem enable
    transport output telnet
    line aux 0
    login local
    transport output telnet
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    line vty 0 4
    privilege level 15
    login local
    transport input telnet ssh
    scheduler max-task-time 5000
    scheduler allocate 4000 1000
    scheduler interval 500
    end
    Any help would be appreciated

    Hello,
    i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
    Can someone help?
    Thank you.
    Here is my config for internal AP and router.

  • Hello,good day problem with Cisco aironet 1040 series acces point

    Hello good day to all, how to configure cisco aironet 1040 series using web configuration attaching through patch cord without using the console.
    if possible please send me step by step instruction, any help is gladly appreciated.
    thank you in advance, More power
    mel

    helo good day sir,
    this is the first time i configure this device i am using Cisco aironet 1040 for our wireless using POE for power, and using cisco catalyst 2960 as switch
    i jack the patch cord in and its goes on colored green,
    the thing is how i can configure the aironet 1040  sir?
    waiting for a step by step instruction,
    thank you in advance
    mel

  • Problem with Cisco Secure agent instalaltion

    Hi,
    I am having problems with installing the Cisco Secure agent 5.2-203 on a RHEL 3.0 AS server.
    I gives me the following error
    [root@ABC CSCOcsa]# ./install_rpm.sh
    Red Hat Enterprise Linux AS release 3 (Taroon Update 6)
    Preparing packages for installation...
    CSAagent-5.2-203
    cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c symbols.c -o symbols.o
    cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c fshook.c -o fshook.o
    cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c hotpatch.c -o hotpatch.o
    cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c adapt.c -o adapt.o
    adapt.c: In function `kutil_vprintk':
    adapt.c:3442: parse error before `char'
    adapt.c:3443: `buf' undeclared (first use in this function)
    adapt.c:3443: (Each undeclared identifier is reported only once
    adapt.c:3443: for each function it appears in.)
    make: *** [adapt.o] Error 1
    Failed to build adaptation kernel module. Aborting
    error: %post(CSAagent-5.2-203) scriptlet failed, exit status 1
    ./install_rpm.sh: installation failed
    Would like to know where the dependancy is and what is needed to be installed for this installation to work.
    Joel

    Hi Joel,
    The following packages are need to compile the 5.2 agent.
    *GCC*
    *kernel-snmp-devel*
    *compat-libstdc++*
    Also 5.2 error messages are alot less friendly than 5.1's

  • PLEASE HELP! Problems with Cisco WLAN and WPA encryption

    I checked the threads and didn't see this posted.  I have a Cisco WLAN card in my T42_2373_C88.  It's a very unfortunate thing that this wireless LAN card/wireless config. utitlity doesn't support WPA encryption.  I'm not entirely sure that it's the problem with the WLAN card, and the reason for this is that I initially set up a network through the Windows config. utility bypassing the IBM utility (which I can no longer do).  I wasn't actually able to connect to my local network until I completely removed the profile for my home network in the access connections, only then was I able to connect (WPA-PSK (TKIP)).  I saw some drivers available for my make and model on the lenovo.com driver site.  I downloaded the drivers and went through device manager specifying the folder where the drivers were located and the drivers were not recognized by windows as valid drivers.  Unless specifically told otherwise, I don't want to manually override and load these drivers.  This is a business machine, and this specific wireless function is VERY critical. 
    Thanks

    try using URLConnection instead of HTTPConnection.

  • Problem with cisco series 800 router and SMTP

    Hello,
    we bought a 877 cisco router and have some problem with SMTP.
    I try to read all forum and KB about but do not find any solution.
    the problem is that when i try to send any email from client (windows mail) i receive a error 533: you need to supply the correct username and password.
    when trying throught hmailserver i receive an email "undeliverable" with this error in body:
    Error Type: SMTP
    Remote server (62.149.128.202) issued an error.
    hMailServer sent: EHLO Globalnet
    Remote server replied: 502 unimplemented (#5.5.1)
    receving email work correctly.
    i'm already using smtp auth, and with my old router everything work fine.
    so i beleive is a config problem, maybe with ESMTP (ehlo)?.
    i attach my config:

    Dear sirs
    Thank you for answer so quickly
    I download this document from Cisco “Configuring the (Remote) Common Application Programming Interface for Cisco 800 Series Router”.
    I have a Lan with Asterisk IP-PBX , the Cisco router have a BRI to public exchange (ISDN) , the router act like a DCP (ISDN- Device Control Protocol) server and listen (DCP messages) in 2578 port.
    I need o know the contents of the TCP frame that carry (ISDN-TCP, the DCP messages) to put a SIP client to talk with PSTN/ISDN using the router. I want to write a software module in Asterisk that translate SIP in (ISDN-DCP) to connect the SIP Phones to the PSTN/ISDN using the BRI ports of the Cisco router. I need to now the contents of this message to dialogue with RCAPI server of the router.
    If forum is the right place perhaps to put this, Could you give me a better place, a mail or other forum to receive the speciation of (ISDN-DCP)
    thank you
    With kinds Regards
    João Pereira Rosa

  • Connectivity Problems with Cisco WRT610n

    I've recently started to get problems with the wireless connection to my WRT610n wireless router.  The mac drops the internet connection periodically - 3 or 4 times a day.  I've run both iStumbler and WIFi analyser and it doesn't seem to be the wireless connection that's dropping - just the ISP.  When I try to connect to a website I just get "contacting....." in the safari status bar.  The only way to re-connect is to switch airport to the other WiFi band.
    It happens on both 2.4GHz and 5GHz bands.  There are other low-band users on the same channel so I've hard coded to a channel that isn't being used.  I've deleted all the local wireless services that I don't use from the networks list.  I've blown the latest firmware into the router  - none of thiese has made a difference.  When it occurs, running the macbook network analyitics shows wireless green and ISP red - but I can still connect using iPhone and windows PC - so the ISP hasn't dropped.
    Interestingly, while trying to fix this problem I discovered another.  I cannot connect wirelessly to the router's set-up page - I have to ethernet into it. This is only a problem for the Macbook;  iPhone and PC can both see the router's set-up page via wireless whereas the macbook just says "contacting.....".  I don't know if these two problems are related, but I know that in the past I *have* been able to connect macbook wirelessly.
    I've got a macbook pro 13 inch - I bought it in about May this year.
    2.7 GHz processor - Core i7
    8GB memory
    1333 MHz DDR3
    OS 10.6.8
    All software up to date - including router's firmware.
    S/N 25 to 35 dB
    Thanks in advance for any help.

    Right, few more R&D's now and it gets even crazier...
    I installed Ubuntu and it has no problem detecting Wifi on My Mac.
    The craziest thing though is, when i hold the OPTION key while the system boots, we know that we can connect to Wifi from there, and indeed I was able to do that!!
    And, once I select MacintoshHD, it boots but we are back to square one, no wifi detected yet again. If Wifi gets detected though, I'm getting this "Connection Timeout" errors.
    Well, I guess I have to just accept that 10.8.4 doesn't just work with the Linksys router!!

  • Problem with Cisco 3250 mobile router WMIC configuration

    I have two 3250 mobile routers, and each one has 2 WMICs, 1 MARC and 1 4-port FEMIC. WIC1 seems to be the AP since its FE port connects to the FE0/0 or MARC, and WIC2 seems to be the bridge since its FE0 connects to FEMIC's FE2/3. The IOS version of router is 12.4(2)T3, and IOS version of both WMIC is 12.2(15).
    I configured two routers in the following way (similar configuration as the police car example in the 3200 router software configuration guide):
    1. Router1's WIC2 (bridge) acts as WGB, and router2's WIC2 (bridge) acts as root bridge.
    2. Router2 is the DHCP server also.
    3. WIC1 of each router is configured as root AP.
    During my testing, the following scenarios happened:
    1. WIC2 of both router can successfully associated.
    2. Wired client can get IP address from router2 when it is pluged into either router's FE ports.
    3. Wirless client can associate with the bridge connection, i.e. connected to the wirless bridge connection. (Weired! Can bridge work as a AP?)
    4. Wireless client can't stably associate with WIC1 of either router, which is supposed to work as AP. A lot of authentication and deauthentication messages are flushing in the console. IP address can be leased, however, Ping was not successful.
    My question is:
    1. Why did this kind of problem happen?
    2. How should i configure each WIC to achieve the set up of wireless client associate with AP and routers communicate through bridge?
    3. Is my understanding on 3200 router wrong?
    Thanks a lot for reply!

    Hello,
    i have the same problem with router CISCO861W-GN-E-K9. Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
    Can someone help?
    Thank you.
    Here is my config for internal AP and router.

  • Gigabitethernet negotiation problem with cisco 2960

    Hi
    I have 2 cisco 2960 switches. one is a WS-C2960-48TT-L Version 12.2(25r)SEE1 and the other WS-C2960-48TC-L Version 12.2(25r)FX.
    When i build a trunk between the gigabit ethernet ports, WS-C2960-48TC-L end shows me half duplex with autonegotiation whereas it is hard coded on the WS-C2960-48TT-L.
    Iam not able to set the speed and duplex for the port on the 2nd switch.
    Is this a bug with the 2960 or a compatibility feature between the 2 2960's
    Narayan

    Hello Narayan,
    Has the speed and dubplex settings on the 2960 been configured? In that case auto-negotiation frames are not sent and the switchport cannot determine the speed/duplex from it's link partner. It will automatically choose 1000 half-duplex.
    Refer to the following document: http://www.cisco.com/warp/public/473/3.html
    HTH
    --Leon
    * Please rate posts.

Maybe you are looking for

  • How can I stay on the same line  when inputting values in the CLI?

    The title is a bit vague i know :) but i have this issue which isn't really a problem but it would be better if I can solve it. Intro) I've made this simple addition (and more options but thats not relevant) application for kids in my spare time so t

  • MSI 6600GT PCI-E or MSI K8N Neo4 Platinum ?

    Dear Sirs, I've just bought a MSI NX6600 TD GT 128MB PCI-E and Motherboard MSI K8N Neo4 Platinum. I Think that one of these is defective bacause WinXP can't work with MSI original drivers, MSI old drivers or Nvidia drivers. The system reboots. I thin

  • Is there a better way to use a procedure

    Hello, Kglad gave me the following code for pausing a scene. //var t:Timer=new Timer(ms,1); ms = milisecond value// var t:Timer=new Timer(6000,1); // 6 seconds // t.addEventListener(TimerEvent.TIMER,f); t.start(); function f(e:Event){ play(); I am ne

  • Converting date to dayNumber

    Post Author: kalyan CA Forum: Formula Hi i have a typical problm .. , i have a column with receiveddate from which i should show some count of recods on that date here is the requirement The Day 0 should be u2018todayu2019s dateu2019 and items appear

  • Can't import projects to GB on IPad which are exported by GB on IPad

    I have recorded over 110 songs on the IPad with Garageband. Lately GB started to react kind of leggy, which makes sense because GB was taking up the bulk of the memory on the IPad. Now you can export complete GB projects files and delete the original