CATS_DA and CADO different column fields

Hy friends,
i have problem with CATS_DA when i log on in different language in system. I create z field in CATSDB - zccode. When i create report in English version everything is fine - field zccode show results. When i logon in Bulgarian language in system field zccode is not there. Other think when open report CADO - old of CATS_DA the filed zccode show in every language.
And now is the question where field zccode is language dependent ?

Hi,
Table maintenance generator is an auto generated module pool program.
Whenever you change anything in your table delete the maintenance generator it will ask for TR give TR and regenerate it (again give TR ) now transport it to QA it will work fine.
One common mistake done by developer is they do not give or give some local TR (which do not get transported) while deleting the maintenanc generatior and it cause the problem you are facing.
Hope this helps.
Regards
Bikas

Similar Messages

Different Column Fields - Inbox & Sent

Hello,
I've recently converted from Windows to Mac. I successfully setup my Exchange account in Mail 5.0. I use several devices to send mail from so not all are coming from one mac.
Under the Mailboxes header in the side bar, I have my generic "Inbox" & "Sent" folders which are displaying fine. The Inbox has the "From" column and "Sent" has the "To" column. This Sent folder only shows emails sent from this specific machine. Again, I use 3 different macs.
When I go down to the "Sent" folder that shows all emails sent from my Exchange account, it has the "From" column. Obviously everything came from me so it's useless. When I click to add the "To" column it adds it here but it also adds it to the generic "Inbox" folder.
Hopefully this isn't difficult to understand and I explained it clearly. Basically I want to customize the columns for the indivdual folders and not have the options I set for one folder go across all folders.
Thanks.

Column view settings are stored globally for all mailboxes. You cannot change them for one mailbox without also affecting the rest, except Mail allows you to have slightly different From/To and Date Sent/Date Received settings for Sent.

Drop Column Field and Drop Row Fields in the Details Field area in the Cube Browser of BIDS/SSDT 2012

Hello. When I right click a cube in the solution explorer and click browse, I am presented with a Details field area which doesn't have "Drop Row Fields" area like in BIDS 2008, and doesn't have "Drop Column Fields" area like in BIDS. It just has one details
area with the message "Drag levels or measures here to add to the query".
How do I include the "Drop Row Fields" area and the "Drop Column Fields" area in this Details area so it can be like 2008?

I am using MDX query to build SSRS report.
How do i get MDX query from Excel ?
Hi Vishal,
We can use "OLAP PivotTable Extension" to get MDX query in Excel, please download it from:
http://olappivottableextend.codeplex.com/
In addition, I would suggest you open a new case if you have any more questiosn.
Regards,
Elvis Long
TechNet Community Support

Changing the Column Header and Hiding the Column dynamically???

Hi friends..
I'm new to OBIEE field. I'm working in a OBIEE project that requires to dynamically change the column header, and dynamically hide the column depending on the prompt value.
I know we can dynamically change the table header using the presentation variable but I couldn't do that same thing with column header.
I searched some forums that suggest to use java script for this purpose but I'm not able to do the same also. If anyone had same issue before please help.

toony, I'm not sure it's possible to do all that you want exactly the way you want, but here are some ideas you can pursue.
To dynamically change column headers without javascript, check this blog out...
http://oraclebizint.wordpress.com/2008/01/25/oracle-bi-ee-101332-dynamic-column-headers-using-presentation-variables-sets-and-conditional-formatting/
As far as dynamically hiding a column, I don't think you can do this, but since you don't provide any details on how the PV is supposed to hide a column based on the value, are you talking about hiding a column for one PV value and another (different) column for a different PV value? Or are you talking about hiding one column when a PV has certain values and displaying it when the PV has a different set of values?
I have managed to create both scenarios via a work-around, but the procedures require some writing so I don't want to put both. Please detail how you want your PV to "hide" a column or columns.
P.S. I don't think column selectors will do the trick for you. Basically column selectors work like this: Say you have a report using Sales Region ID, Region Name, and Sales. Now let's say you want the user to choose if he/she wants to see annual sales, or quarter sales or weekly sales, etc. The column selector view would allow you to put the various columns (Year Sales, Quarter Sales, Weekly Sales) as an option the user can select. Once selected, the sales figure will change for the time period selected. For an example of how this is done, check out the section in this "Oracle by Example" link.
Waited too long to publish this... Madan beat me to it, so there is some overlap here...
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/saw/saw.html
Edited by: LC143 on Oct 27, 2008 9:21 AM

Write arrays into a text file in different columns at different times

Hi,
I have a problem write data into a text file. I want to write 4 1D arrays into a text file. The problem is that I need to write it at different time and in different column (in other word, not only append the arrays).
Do you have an idea to solve my problem?
Thank you

A file is long a linear string of data (text). In order ro insert columns, you need to rewrite the entire file, because colums are interlaced over the entire lenght of the file.
So:
read file into 2D array
insert columns using array operations
write resulting 2D array to file again.
(Only if your colums are guaranteed to be fixed width AND you know the final number of colums, you could write the missing columns as spaces and then overwrite later. Still, it will be painful and inefficient, because column data are not adjacent in the file.)
LabVIEW Champion . Do more with less code and in less time .

Different conditions for different columns

Hi,
I have two tables and both have 3 common columns. I have to write a query joining the two tables and get different columns with different conditions.
For e.g., I have the tables test and test1.
create table test (a1 varchar(10), a2 varchar(10), a3 varchar(10), a4 date, a5 number, a6 number, a7 number, a8 number);
create table test1 (a1 varchar(10), a2 varchar(10), a3 varchar(10));
insert into test1 values('abc', 'a', 'z');
insert into test1 values('xyz', 'b', 'y');
insert into test values('abc', 'a', 'x', trunc(sysdate,'MM'), 100, 200, 300, 400);
insert into test values('abc', 'b', 'z', trunc(sysdate,'MM'), 567, 4778, 4234, 6767);
insert into test values('xyz', 'a', 'y', trunc(sysdate,'MM'), 5467, 2134, 5678, 8332);
insert into test values('xyz', 'b', 'z', trunc(sysdate,'MM'), 3534, 744, 678547, 46);
insert into test values('abc', 'a', 'x', trunc(add_months(sysdate,-1),'MM'), 700, 800, 900, 600);
insert into test values('abc', 'b', 'z', trunc(add_months(sysdate,-1),'MM'), 565477, 474578, 4456234, 226767);
insert into test values('xyz', 'a', 'y', trunc(add_months(sysdate,-1),'MM'), 235467, 2342134, 255678, 258332);
insert into test values('xyz', 'b', 'z', trunc(add_months(sysdate,-1),'MM'), 324534, 25744, 678547, 78846);
select * from test1;
A1     A2     A3
abc     a     z
xyz     b     y
select * from test;
A1     A2     A3     A4                     A5     A6     A7     A8
abc     a     x     05/01/2010 00:00:00     100     200     300     400
abc     b     z     05/01/2010 00:00:00     567     4,778     4,234     6,767
xyz     a     y     05/01/2010 00:00:00     5,467     2,134     5,678     8,332
xyz     b     z     05/01/2010 00:00:00     3,534     744     678,547     46
abc     a     x     04/01/2010 00:00:00     700     800     900     600
abc     b     z     04/01/2010 00:00:00     565,477     474,578     4,456,234     226,767
xyz     a     y     04/01/2010 00:00:00     235,467     2,342,134     255,678     258,332
xyz     b     z     04/01/2010 00:00:00     324,534     25,744     678,547     78,846I have to write a query to get values for columns a1, a4, a5, a6, a7 and a8. For each distinct month fro mthe column a4, the values for columns a1, a4 a5 and a6 should be based on the condition test1.a1=test.a1 and test1.a2=test.a2. The condition for columns a7 and a8 should be test1.a1=test.a1 and test1.a3=test.a3.
How can I do this?
Thanks,
Machaan

remove the 4th join and only duplicate test;
SQL> ed
Wrote file afiedt.buf
1 select distinct
2 case
3          when t11a1 is null then
4            t12a1
5          else
6            t11a1
7        end as a1
8        ,case
9          when t11a4 is null then
10            t12a4
11          else
12            t11a4
13         end as a4
14        ,case
15          when t11a5 is null then
16            t12a5
17          else
18            t11a5
19         end as a5
20 from (
21        select t11.a1 as t11a1
22              ,t11.a2 as t11a2
23              ,t11.a3 as t11a3
24              ,t11.a4 as t11a4
25              ,t11.a5 as t11a5
26              ,t11.a6 as t11a6
27              ,t11.a7 as t11a7
28              ,t11.a8 as t11a8
29              ,t12.a1 as t12a1
30              ,t12.a2 as t12a2
31              ,t12.a3 as t12a3
32              ,t12.a4 as t12a4
33              ,t12.a5 as t12a5
34              ,t12.a6 as t12a6
35              ,t12.a7 as t12a7
36              ,t12.a8 as t12a8
37        from test1 t1
38            ,test t11
39            ,test t12
40        where t1.a1 = t11.a1
41        and   t1.a2 = t11.a2
42        and   t1.a3 = t12.a3
43* )
SQL>
SQL> /
A1         A4                A5
xyz        01-APR-10     324534
xyz        01-MAY-10       3534
abc        01-APR-10        700
abc        01-MAY-10        100

How To UPLOAD a DATA (.DAT) fiel from PC to internal table and then split it into the data different columns

Hi all,
I am new to ABAP Development. I need to upload a .DAT file (the file doesn#t have any proper structure-- Please find the .DAT file in the attachment). After uploading the DATA (.DAT) fiel I need to split in into different columns. Refering the attached .DAT fiel the fields in bracets like:
[Arbeitstag], [Pecunia], [Mita], [Kunde], [Auftrag] and [Position] are different fields that need to be arranged in columns in an internal table. this .DAT fiel which I want to upload and then SPLIT it into various fields will will treated as MASTER DATA table for further programming. The program that I had written is as below. Also please refer the attached .DAT table.
Please if any one could help me. i searched a lot in different forums but couldn't find me a solution. Also note that the attached fiel is in text (.txt) format here but in real situation the same fiel is in DATA (.DAT) format.
*& Report ZDEMO_ZEITERFASSUNG9
REPORT ZDEMO_ZEITERFASSUNG9.
Types: Begin of ttab,
        Rec(1000) type c,
       End of ttab.
DATA: itab type table of ttab.
DATA: wa_tab type ttab.
DATA: file_str type string.
Parameters: p_file type localfile.
At selection-screen on value-request for p_file.
                                       CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
                                        EXPORTING
*                                          PROGRAM_NAME        = SYST-REPID
*                                          DYNPRO_NUMBER       = SYST-DYNNR
*                                          FIELD_NAME          = ' '
                                           STATIC              = 'X'
*                                          MASK                = ' '
                                         CHANGING
                                           file_name           = p_file.
*                                        EXCEPTIONS
*                                          MASK_TOO_LONG       = 1
*                                          OTHERS              = 2
Start-of-Selection.
file_str = P_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\BUP_ZEIT.DAT'   " This the file source address
      FILETYPE                      = 'DAT'
      HAS_FIELD_SEPARATOR           = ';'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*     CODEPAGE                      = ' '
*     IGNORE_CERR                   = ABAP_TRUE
*     REPLACEMENT                   = '#'
*     CHECK_BOM                     = ' '
*     VIRUS_SCAN_PROFILE            =
*     NO_AUTH_CHECK                 = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    tables
      data_tab                      = itab
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP at itab into wa_tab.
        WRITE: / wa_tab.
ENDLOOP.
I will be grateful to all you experts for ur inputs
regards
Chandan Singh

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

How to show value and unit in different columns

Hi All,
I need ABAP help for the below requirement in BI7.0
Data source contains the field Amount in local currency (Data source is flat file of CSV format)
Amount in local currency
       1000 INR
       2000 INR
       1000 GBP
       2000 EUR
I have to get this value in target like below( value and unit should be in different columns)
Amount in local currency              0currency
       1000                                           INR
       2000                                           INR
       1000                                           GBP
       2000                                           EUR
Can any one help me how to declare the data type for Amount in local currency and how to show this value in two columns in the target.
Thanks,
kishore.

TYPES:BEGIN OF ty_stru,
s1 TYPE string,
END OF ty_stru,
BEGIN OF ty_stru1,
s2 TYPE string,
s3 TYPE string,
END OF ty_stru1.
DATA:itab TYPE TABLE OF ty_stru,
      wa LIKE LINE OF itab.
DATA:itab1 TYPE TABLE OF ty_stru1,
     wa1 LIKE LINE OF itab1.
START-OF-SELECTION.
"--Input--
In input 1000 and USD having space
wa-s1 = '1000 USD'.
   APPEND wa TO itab.
wa-s1 = '1000 INR'.
   APPEND wa TO itab.
wa-s1 = '1000 EUR'.
APPEND wa TO itab.
"--Input--
LOOP AT itab INTO wa.
SPLIT wa-s1 AT space INTO wa1-s2 wa1-s3.*------> split command
APPEND wa1 TO itab1.*---------------->splited value store into another internal table
ENDLOOP.
"--Display--
LOOP AT itab1 inTO wa1.
    WRITE: wa1-s2,
           wa1-s3.
ENDLOOP.
"--Display--
Output:
1000 USD
1000 INR
1000 EUR
This is simple prgram for split a string into two different string based on space
regards
Dharma
Edited by: dharma raj on Aug 19, 2009 2:01 PM

Parse string into different column and optimization

We are in process of building an audit process for any changes that occur automatically or manually by the user on some of the table data. To do this we have two options:
1. Have master table to store the audit event summary and a detail table to store each column change with old and new values. Something like:
CREATE TABLE TEST_ADT_DTL
EVNT_ID      NUMBER,
COL_NAME     VARCHAR2(1000),
OLD_COL_VAL     VARCHAR2(1000),
NEW_COL_VAL     VARCHAR2(1000)
);but this approach has some processing overhead since for the changes to each record there will be multiple records based on number of columns updated. If we are loading 40K transaction twice a month, and the changes are almost 30-40% so the detail table will grow considerably.
2. To have the detail table with one column that will have a concatenated string of changes with field name, old and new values.
CREATE TABLE TEST_ADT_EVNT
EVNT_ID        NUMBER,
TBL_NAME       VARCHAR2(100),
OPER_CD        VARCHAR2(1),
USR_ID         VARCHAR2(10),
ACT_DT         DATE,
PK_STRNG_VAL   VARCHAR2(100),
CMNT_TXT       VARCHAR2(1000)
CREATE TABLE TEST_ADT_DTL
EVNT_ID      NUMBER,
ADT_LOG     VARCHAR2(1000)
INSERT INTO TEST_ADT_EVNT VALUES (1, 'CUSTOMER', 'A', 'ABC', SYSDATE, 'CUS0001', 'SOME COMMENT');
INSERT INTO TEST_ADT_EVNT VALUES (2, 'CUSTOMER', 'U', 'ABC', SYSDATE, 'CUS0001', 'SOME COMMENT');
INSERT INTO TEST_ADT_EVNT VALUES (3, 'ORDER', 'A', 'XYZ', SYSDATE, 'CUS0002', 'SOME COMMENT');
INSERT INTO TEST_ADT_EVNT VALUES (4, 'ORDER', 'U', 'EFG', SYSDATE, 'CUS0002', 'SOME COMMENT');
INSERT INTO TEST_ADT_EVNT VALUES (5, 'ORDER', 'U', 'XYZ', SYSDATE, 'CUS0002', 'SOME COMMENT');
INSERT INTO TEST_ADT_DTL VALUES (2, 'FIELD:CITY,OLD:AVENEL,NEW:EDISON;FIELD:ZIP,OLD:07001,NEW:07056;');
INSERT INTO TEST_ADT_DTL VALUES (4, 'FIELD:ADDRESS,OLD:234 ROGER ST,NEW:124 WEST FIELD AVE;FIELD:STATE,OLD:NJ,NEW:NY;FIELD:PHONE,OLD:,NEW:2012230912;');
INSERT INTO TEST_ADT_DTL VALUES (5, 'FIELD:MID_NAME,OLD:,NEW:JASON;FIELD:ADDRESS,OLD:,NEW:3 COURT CT;');
COMMIT;I want to know if we want to generate a report for audit log, how can I display the data from detail table in columns. I mean how to parse the ADT_LOG column to show the data in three different columns like:
FIELD     OLD         NEW
CITY     AVENEL    EDISON
ZIP       07001      07056
.along with the columns from EVNT table.
And, want to know which approach would be better.

hey I think I finally got it using the model clause.
not sure if this will be faster or not.
you can increase the number of iterations if you are not hitting them all,
( the lower your iteration number the faster this will run)
select adt_log, field, old, new from
with TEST_ADT_DTL as
(select 2 evnt_id, 'FIELD:CITY,OLD:AVENEL,NEW:EDISON;FIELD:ZIP,OLD:07001,NEW:07056;' ADT_LOG FROM DUAL UNION
select 4, 'FIELD:ADDRESS,OLD:234 ROGER ST,NEW:124 WEST FIELD AVE;FIELD:STATE,OLD:NJ,NEW:NY;FIELD:PHONE,OLD:,NEW:2012230912;' from dual union
select 5, 'FIELD:MID_NAME,OLD:,NEW:JASON;FIELD:ADDRESS,OLD:,NEW:3 COURT CT;' from dual
select evnt_id, adt_log, field, old, new from test_adt_dtl
model return updated rows
partition by (evnt_id)
dimension by ( 0 d)
measures (adt_log, adt_log field, adt_log old, adt_log new, 0 it_num )
rules iterate (50) -- until ?
adt_log[any] = adt_log[0],
field[0] = substr(adt_log[0], instr(adt_log[0],'FIELD',1,1)+6, instr(adt_log[0],',',1,1) - instr(adt_log[0],'FIELD',1,1)-6),
old[0] =   substr(adt_log[0], instr(adt_log[0],'OLD',1,1)+4, instr(adt_log[0],',',1,2) - instr(adt_log[0],'OLD',1,1)-4),
new[0] =   substr(adt_log[0], instr(adt_log[0],'NEW',1,1)+4, instr(adt_log[0],';',1,1) - instr(adt_log[0],'NEW',1,1)-4),
field[iteration_number ] =    substr(adt_log[0],
                                     instr(adt_log[0],'FIELD:',1,iteration_number + 1 ) + 6,
                                     (instr(adt_log[0],',',( instr(adt_log[0],'FIELD:',1,iteration_number + 1 ) + 6 ),1)
                                     ( instr(adt_log[0],'FIELD:',1,iteration_number + 1 ) + 6))
old[iteration_number ] =    substr(adt_log[0],
                                     instr(adt_log[0],'OLD:',1,iteration_number + 1 ) + 4,
                                     (instr(adt_log[0],',',( instr(adt_log[0],'OLD:',1,iteration_number + 1 ) + 4 ),1)
                                     ( instr(adt_log[0],'OLD:',1,iteration_number + 1 ) + 4))
new[iteration_number] =    substr(adt_log[0],
                                     instr(adt_log[0],'NEW:',1,iteration_number + 1 ) + 4,
                                       (instr(adt_log[0],';',1,iteration_number + 1)
                                       (instr(adt_log[0],'NEW:',1,iteration_number + 1 ) + 4)
order by evnt_id, it_num
where new is not nullEdited by: pollywog on Apr 13, 2010 10:28 AM

Displaying one field over 5 different columns with different criteria

Post Author: new_crystal
CA Forum: Crystal Reports
I am new to Crystal and need some help urgently..
I saw you answering almost each n every question on Crystal asked in the forum...thats why sending you my question in a message...I have also posted it on the forum
Here is what I want:
I am creating a report which has a xml data source.
I have a field named fieldvalue in the xml, I need to present this fieldvalue in a column format based on the name of the column heading which is another field in the database called fielddata
here is what i want
fielddata1 fielddata2 fielddata3 .......
fieldvalue1 fieldvalue2 fieldvalue3......
i have dragged the fieldvalue 3 times in the report and applied different formula for each one of them
here is the eg. of the formula
if ( = "A" ) then
but it is not giving me the correct values pulled from the data source. for the first column it is pulling correctly but for the rest of the columns it is giving values as 0's.
Thanks in Advance

Post Author: pvierheilig
CA Forum: Crystal Reports
Hello -
Can't you set the group to be on the category? Selecting the product name in the record selection formula will present only those product (as opposed to categories).
A subreport, as suggested, will work as well, but your stated record selection will continue to produce the same results - check that, too. Additionally, you could group on the category and add a group 'b' section (Section Expert; see the Help file).

How to get multiple records in one row and different column

Hi All,
I am using oracle database 11g
and i have a two tables table_1, table_2
table_1 having columns
emp_no
first_name
middle_name
last_name
email
and table_2 having columns
emp_no
phone_type
phone_number
and having entires
emp_no phone_type phone_number
1001 MOB 9451421452
1001 WEMG 235153654
1001 EMG 652341536
1002 MOB 9987526312
1003 WEMG 5332621456
1004 EMG 59612356
Now i want the output of values with phone type as MOB or WEMG in a single row with different columns
emp_no first_name middle_name last_name email mobile officeno
1001 mark null k [email protected] 9451421452 235153654
1002 john cena gary [email protected] 9987526312 null
1003 dany null craig [email protected] null 5332621456
1004 donald finn sian [email protected] null null
can i have any inputs to achive this???
Regards
$sid

Frank Kulash wrote:
sonething like this:Frank, you missed aggregate function (pivot requires one). However main thing is it will cause ORA-01748:
with table_1 as (
                 select 1001 emp_no,'mark' first_name,null middle_name,'k'last_name,'[email protected]' email from dual union all
                 select 1002,'john','cena','gary','[email protected]' from dual union all
                 select 1003,'dany',null,'craig','[email protected] null' from dual union all
                 select 1004,'donald','finn','sian','[email protected]' from dual
     table_2 as (
                 select 1001 emp_no,'MOB' phone_type,9451421452 phone_number from dual union all
                 select 1001,'WEMG',235153654 from dual union all
                 select 1001,'EMG',652341536 from dual union all
                 select 1002,'MOB',9987526312 from dual union all
                 select 1003,'WEMG',5332621456 from dual union all
                 select 1004,'EMG',59612356 from dual
SELECT     *
FROM     table_1      t1
JOIN     table_2      t2 ON t1.emp_no = t2.emp_no
PIVOT     (    max(t2.phone_number)
     FOR t2.phone_type IN ( 'MOB'   AS mob
                             , 'WEMG' AS wemg
        FOR t2.phone_type IN ( 'MOB'   AS mob
ERROR at line 19:
ORA-01748: only simple column names allowed hereYou need to:
with table_1 as (
                 select 1001 emp_no,'mark' first_name,null middle_name,'k' last_name,'[email protected]' email from dual union all
                 select 1002,'john','cena','gary','[email protected]' from dual union all
                 select 1003,'dany',null,'craig','[email protected] null' from dual union all
                 select 1004,'donald','finn','sian','[email protected]' from dual
     table_2 as (
                 select 1001 emp_no,'MOB' phone_type,9451421452 phone_number from dual union all
                 select 1001,'WEMG',235153654 from dual union all
                 select 1001,'EMG',652341536 from dual union all
                 select 1002,'MOB',9987526312 from dual union all
                 select 1003,'WEMG',5332621456 from dual union all
                 select 1004,'EMG',59612356 from dual
     table_3 as (
                 select t1.emp_no,first_name,middle_name,last_name,email,
                         phone_type,phone_number
                   FROM     table_1      t1
                   LEFT JOIN     table_2      t2 ON t1.emp_no = t2.emp_no
SELECT     *
FROM     table_3
PIVOT     (    max(phone_number)
     FOR phone_type IN ( 'MOB'   AS mob
                             , 'WEMG' AS wemg
    EMP_NO FIRST_ MIDD LAST_ EMAIL                     MOB       WEMG
      1004 donald finn sian [email protected]
      1003 dany        craig [email protected] null            5332621456
      1001 mark        k     [email protected]      9451421452 235153654
      1002 john   cena gary [email protected]    9987526312
SQL>SY.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

MS Project 2010 cut and paste 255 characters in notes column field into MS Excel

I need to copy and paste notes fields in MS Project 2010 which have more than 255 characters into MS Excel and I want all the text to paste into MS Excel (ie >255 characters). I need to be able to do this for at least a text column and the notes column
as I can do a lookup from there. So to recap I need to copy and paste the contents of 2 columns including the notes column into Excel and paste all the text >255 characters. I know how to do this cell by cell however this is not feasible for a large
plan on a weekly basis. It sounds so simple if you know how!

John,
I agree that note field will accept more than 255 characters. May be in my comment i have written "Both" that is confusing. Limit is only for text column.
Some time note field may give some issues refer to http://support.microsoft.com/kb/169726
kirtesh

Different columns and arrangements in different Folders

I arrange my mail into various folders. For various reasons, I need to have different columns visible and different arrangements of columns in different folders (Kind of like needing From: in InBox and To: in sent items.)
I can't figure out how to set this, by folder and have it 1) stick and 2) not impact other folders.
Help!
Thanks
John

must have not worn my glasses when i first checked that feature long time ago, so sorry for the erroneous info in my previous post, and no you cannot change column view whether within one email account or across email accounts. yikes, need to be more careful when i send info on these pages

How to make a particular row and column field editable in ALV

Hi Experts,
I have a requirement to make a particular row and column field editable in ALV output. Like i need to make 2nd row - 4th column editable of ALV output.
Kindly help me out to solve this.
Any help would be appreciated.
Thanks,
Ashutosh

Hi Ashutosh,
please check below, explained by some experts.
In the below link editing two columns MOD_RANK and TECH_RANK.
These two columns will be in edit mode once after selecting the required record
Editing single cell in a row of ALV table
And also look for more info
http://scn.sap.com/thread/884976

CATS_DA and CADO different column fields

Similar Messages

Maybe you are looking for