& causing problem in XML

Hi
We are sending information using web service we generate data in XML.
Many time we received information contains "&" value. Due to which XML fails to parse.
Can anyone suggest me how to deal with this issue.
Thanks and regards,
RSD

We also tried that but when data publish it shows "&" than "&" due to which end users are confused.There's no other way, "&" must be escaped.
Could you show how you're parsing the XML content before publishing the data?
There's a good chance you're not doing it properly, resulting in text() nodes just being serialized instead of being extracted as scalar values.
Also give your database version, might be helpful in the future.
Edited by: odie_63 on 19 avr. 2012 09:37

Similar Messages

XML tag markers moved: Find and Replace causing problem in xml elements

Hi All,
I am doing find and replace using GREP. While using the expression like $1, $2 (Found Items) in the change to field it changes the placement of tag marker. If the found item is a part of two of more xml elements, I am getting a serious problem while replacing it. (ie. The xml tag markers are moved.)
See the screen shot below, then you may get better idea. And help me to overcome this issue.
This is just an example to show you what i'm trying to say, there are so many cases like this.
Original text/ Before doing find replace
After replacing
Green4ever

Hi Peter and John,
but it seems to me that the example is looking for any space that
follows a semi-colon and has two word characters following it, and
repalce that with an em space. I think you could do the same using look
behind and look ahead and not need to replace the found text.
Yes you are right about the look behind and look ahead. I'd like to show some more examples to show what the actual problem is,
Original/Before Replacing,
(Consider there is another case here, instead of em-space some times normal word space will also be there)
Using the Grep:
Find What---------> ^(\d+\.(?:\d+)?)~m
Change To------------->$1\t
After Replace:
Did I make any sense? Eventhough this will not make any changes in the layout, my requirement is to insert the tab out-side the tag marker not indise.
Green4ever

Caused by: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute

This is a Bursting problem under EBS 5.6.3. In production we have 5.6.2 and since our development system to 5.6.3 has been upgraded, the following error occurs on every single Burst being done using the Concurrent Manager only:
Caused by: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
 at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:205)
 at oracle.xml.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1502)
 at oracle.xml.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1408)
 at oracle.xml.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1350)
 at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1180)
 at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
 at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
 at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
 at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(BurstingProcessorEngine.java:1340)
 at oracle.apps.xdo.batch.BurstingProcessorEngine.process(BurstingProcessorEngine.java:1297)
 at oracle.apps.xdo.batch.DocumentProcessor.process(DocumentProcessor.java:213)
 at xxwel.ebs.xmlp.XXWELBurster.processDocuments(XXWELBurster.java:143)
I can run the same file through 5.6.3 ($JAVA_TOP) libraries mounted on my JDev with no problems. Also the same XML file runs fine on Production under 5.6.2 - no problems. I have also checked the XML file using a syntax checker. I know this is not a syntax issue even though it looks like it.
Could someone point me in the right direction - explain what this means. Getting desperate as 5.6.3 will be going into production soon and all Bursting will fail with this error. I can't get the simplest XML File to Burst - NOTE this is only occurring on the EBS system (even running without the CM ie. a standalone java main it fails). I think this has something to do with the XML parser version and the EBS environment.
Please help...

Hi Tim, good thinking - wouldn't have thought to check this file. Anyway can confirm that the problem is happening with multiple burst control files so I haven't checked the files themselves as the problem seems systemic. anyway here is an example.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXWEL_BIP_UNI_INVOICES/LIST_G_CUSTOMER_NUMBER/G_CUSTOMER_NUMBER">
<xapi:delivery>
<xapi:email server="mailwa01" port="25"
from="${ADMIN_EMAIL}" reply-to ="${ADMIN_EMAIL}">
<xapi:message id="111" to="${ADMIN_EMAIL}" attachment="true" subject="Unigas Inv
oice No: ${TRX_NUMBER}">
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="111">
<xapi:template type="rtf" location="/u02/prod/prodappl/wel/11.5.0/interface/bip/templates/uni_invoice_template.rtf">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
I will start stripping the control files to make sure they are not the problem in the meantime.

SOAP adapter URL causing problems

Hi gurus,
As of PI 7.1, SAP is recommending to use:
http://host:port/XISOAPAdapter/MessageServlet?senderParty=FP&senderService=FS&interface=IF&receiverParty=TP&receiverService=TS&interfaceNamespace=IFNamespace
instead of
http://<serverhost>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<ServiceName>:<ChannelName>
while sending messages to the SOAP adapter. BUT, the new format is causing problems when the developers are trying to import the WSDL (to Webdynpro, eclipse, etc). Also, XMLSpy complains that the xml is not well-formed because of the soap address field.
So I removed the & signs and replaced them with the escape equivalent of & for the new format and tried to use:
http://host:port/XISOAPAdapter/MessageServlet?senderParty=FP&senderService=FS&interface=IF&receiverParty=TP&receiverService=TS&interfaceNamespace=IFNamespace
But this time, SOAP adapter replies saying there is no binding. How to overcome this?
Thanks
Gokhan

try this format:
http://<hostname OR IP addr>:<portno>/XISOAPAdapter/MessageServlet?channel=:<SenderService>:<SenderSOAPCC>&version=3.0&Sender.Service=<senderService>&Interface=<senderNamespace>%5E<senderMI>

Did enabling feedburner after submitting my podcast cause problems?

My podcast was submitted at http://www.audiotim.com/rss.xml, but since then I created a feed on feedburner at http://feeds.feedburner.com/AudioTim
My two problems so far are that when I created my profile on feedburner for this site I added category, subtitle, etc but that isn't showing up on the itunes page; and secondly, I now have a weird message on top of my second post that reads:
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
I'm not sure if enabling feedburner after submitting caused either of these problems, but can you explain to me how to correct these two errors? I've read the http://www.apple.com/itunes/podcasts/techspecs.html page, but man is that confusing in regards to submitting metadata such as category, subtitle, etc.

iTunes is looking for the feed at http://www.audiotim.com/rss.xml , which you have removed. What is displayed in the Store is cached from that feed, and won't be updated again unless you restore it. If you want to use the Feedburner version then you need to restore the original feed, and add the following tag in the top section (between the 'channel' tag and the first 'item' tag:
<itunes:new-feed-url>http://feeds.feedburner.com/AudioTim</itunes:new-feed-url>
You should leave the old feed in place for a couple of weeks.
As to the mysterious message, this was in the original feed and is in the present one. It's something you've put there yourself, though I can't say how. Sometimes people use a word processor to create a feed or its contents and this causes problems with the hidden commands - you should use a plain text editor. If you've created this feed by submitting data to Feedburner and letting it write the feed, rather than simply submitting the original feed to Feedburner, you will need to find the pace where you entered this info, delete it all and write it in again.

Null values from DB2 cause problems

Hi,
I have another problem with database link to DB2 using IBM iSeries Access for Linux on 64 bit OEL5 with Oracle Database gateway and unixODBC 2.2.14.
DB link works. However, null values from DB2 cause problems. Date columns that are null on db2 return a date '30.11.0002', and character columns that are null return an error ORA-28528: Heterogeneous Services datatype conversion error.
isql returns correct results.
How can i fix this? Perhaps set some parameters for data conversion on the gateway?
Thank you.

If the driver is not fully ODBC level 3 compliant and misses functions, we're lost. But sometimes the drivers are ODBC level 3 compliant but miss the correct 64bit implementation. In those cases we can tell the gateway to use the 32bit ODBC level 3 standard by setting in the gateway init file:
HS_FDS_SQLLEN_INTERPRETATION=32

Problem with XML on Linux

hi everybody,
I've a big problem with XML on Linux, in details I see my program stopping on Linux at the instruction
XMLReader xr = XMLReaderFactory.createXMLReader("org.apache.crimson.parser.XMLReaderImpl");
and it's strange because on Windows it runs and there aren't problems about permissions on files, does anyone knows what to do?
thanks in advance!
Stefano

What happens on that line? I'm assuming you get some kind of error or exception.
Make sure the JAR file for Crimson is in your classpath.

Problem with XML in APEX ORA-06502

i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
declare
l_XML varchar2(32767);
begin
select xmlElement
"iva",
xmlElement("numeroRuc",J.RUC),
xmlElement("razonSocial", J.RAZON_SOCIAL),
xmlElement("idRepre", J.ID_REPRE),
xmlElement("rucContador", J.RUC_CONTADOR),
xmlElement("anio", J.ANIO),
xmlElement("mes", J.MES),
xmlElement
"compras",
select xmlAgg
xmlElement
"detalleCompra",
--xmlAttributes(K.ID_COMPRA as "COMPRA"),
xmlForest
K.COD_SUSTENTO as "codSustento",
K.TPLD_PROV as "tpldProv",
K.ID_PROV as "idProv",
K.TIPO_COMPROBANTE as "tipoComprobante",
to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
K.ESTABLECIMIENTO as "establecimiento",
K.PUNTO_EMISION as "puntoEmision",
K.SECUENCIAL as "secuencial",
to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
K.AUTORIZACION as "autorizacion",
to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
xmlElement
"air",
select xmlAgg
xmlElement
"detalleAir",
xmlForest
P.COD_RET_AIR as "codRetAir",
to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
from ANEXO_COMPRAS P
where P.ID_COMPRA = K.ID_COMPRA
AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
xmlElement("secRetencion1", K.SEC_RETENCION_1),
xmlElement("autRetencion1", K.AUT_RETENCION_1),
xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
xmlElement("docModificado", K.DOC_MODIFICADO),
xmlElement("estabModificado", K.ESTAB_MODIFICADO),
xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
xmlElement("secModificado", K.SEC_MODIFICADO),
xmlElement("autModificado", K.AUT_MODIFICADO)
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
AND K.ID BETWEEN 1 AND 25
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
declare
l_XML CLOB;
begin
--Oculta XML
sys.htp.init;
wwv_flow.g_page_text_generated := true;
wwv_flow.g_unrecoverable_error := true;
--select XML
select xmlElement
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

JohannaCevallos07 wrote:
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
Thanks

I want to uninstall ReloadEvery as I think it is causing problems however it is not in my list of Extensions or Plugins yet it is clearly installed, I tried reinstalling FF but it was still there! How can I get rid of it?

I installed ReloadEvery a while ago and it seemed to be working fine however I am now having problems with FF crashing and weird things like pages not reloading and not being able to use the back button etc
I have already tried uninstalling and reinstalling FF and upgrading to FF 4.
When I upgraded to FF 4 I was still having problems even though I didn't have any Extensions installed at all, or so I thought. I noticed that ReloadEvery was still installed. I was rather puzzled as I had done a clean install of FF 4. I want to remove ReloadEvery to see if it will solve my problems.
I have also tried following the help on the FF Troubleshooting about manually uninstalling Extensions but again ReloadEvery not listed there yet I am still able to use it in FF!
I want to get rid of it!! I really need some help please.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies

FF 3.6 AND 5 on same Mac, 1 profile - can I uninstall 5 without causing problems running 3.6 or with the profile?

I upgraded from 3.6.16 to 5, but don't like how 5 handles tabs (auto reloading 'problem loading' tabs when internet connection is reestablished). So I installed 3.6 in a separate folder, e.g. both versions are on this computer. I went back to using 3.6, and let it upgrade to either 3.6.18 or 19 (don't recall which & it's not open right now). I'm having problems with it using too much CPU & Memory, and not sure if that's a difference between 3.6.16 & 3.6.18/19, or if having 5 on the same computer even if closed could be causing the problem.
Can I uninstall 5 without causing problems with the 3.6 version and the single profile?

If you haven't tried this, give it a try. It worked for me, hopefully it will work for you. In your version 3 firefox, disable all extensions, I had two plugins (doubletwist and joost, disable those if you have them). Then install firefox 5 by overwriting your version 3 firefox. It should work fine after that. I tried everything before, I gave that a last ditch shot. Oh yeah, before you install firefox 5, clear your cache of everything just to be sure.
Hopefully that helps.

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

Problem in xml query

Hi
I am working on BLS and having problem in xml query.I want to perform some calculation over xml columns.Than total of this as a new column.I can do this part in logic editor itself but can i do these both task by XSLT.
Can be made our own XSLT for this ?
I am feeling kind of fear to xslt. Can anybody help me in this.
Thanks a lot in advance
thomas

Ram,
In xMII there is a list of predefined xslt transforms that do something similar to what you are explaining. The 3 that I think may be what you are looking for are
they are under Calculation Transformations and Subtotal Transformation take a look at these and tell me if they are doing what you want to accomplish. In the xMII help file do a search on Inline Transforms or navigate to Advanced Topics -> Inline Transforms -> Predefined Inline Transforms. In this section there are examples of how to use these transforms and apply them in the query templates. If this is not what you are looking for can you explain in a little more detail along with a simple example of how you want this transform to work. Also why do you want to use xslt if you can already accomplish this in BLS?
Regards,
Erik

& causing problem in XML

Similar Messages

Maybe you are looking for