CC keeps wanting to upgrade recently upgraded programs
I'm been noticing an issue for the past weeks. CC keeps showing an upgrade available for Premiere CS6 Family, InDesign CC, and Dreamweaver CC.
I've upgraded the programs and afterward closed the CC app running on my menu bar (to remove background process when working)
When I reopen the CC app it shows the same updates ready for the same programs.
Thoughts.
I'm on OS 10.8.4
Delete the com.apple.mail.plist file from your /Library/Preferences/ folder, log out and back in, that should do it.
Similar Messages
-
i have a late 2008 macbook running good now at 2012 when will i need to upgrade recently upgrade to 4g memory and 2ghrz
Nobody can tell you when you'll need to upgrade, as it depends on the software you're running, the operating system that software requires, and the state of your hardware. You've added memory, which you needed to do with Mountain Lion, and you could replace the hard drive with an SSD for better disk performance.
-
I also heard it may have to do with my ios version being newer than itunes? I don't know how to find what version I am using either? Thanks for any help!!!
In case this helps, the error message I get when trying to uninstall itunes says " the feature you are trying to use is on a network that is unavailable" then is tells me to click ok to try again or enter an alternate path to a folder containing install package 'itunes.msi', then there is a drop down box and it gives me to places to search beginning with C:....and neither of them work.
-
My iTunes keeps crashing. I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it. I recently upgraded to 10.5. Any ideas? I am running Windows 7 on a new, decent, laptop. The music is on the laptop's hard drive. There is plenty of hard drive space left.
iTunes starts fine, and I can do stuff, then within a minute or two or three it gives me an error message pop-up.The error message says:
iTunes has stopped working.
Windows can check nline for a solution to the problem.
-> Check online for a solution and close the program
-> Close the program
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.5.0.142
Application Timestamp: 4e9243f2
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.6195
Fault Module Timestamp: 4dcddbf3
Exception Code: c0000005
Exception Offset: 0001500a
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I've chosen both items, neither does anything but close the program. This problem is new with iTunes 10.5; I did not have it before. -
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while -
I recently upgraded itunes. Now when listening to my library there is music from all authorized computers in my house. if I try to delete a song it is gone from everyones library in the house. I just want to listen to my music not my kids stuff. How do I get back to MY library Please help.
have you tried working through the suggestions from the following document?
iTunes and QuickTime for Windows: Songs and other audio don't play correctly -
I just recently upgraded from a 4S to a 5C. I backloaded the 5 from Itunes and now everytime i plug into itunes, it asks if I want to set up as new or restore from a previous backup. Why is it doing this. I did it twice yesterday..... In addtion, those are the only options I have. I cannot do anything else unless I choose one of the two. Zero options. Phone works fine though.
I figure that either of those options will result in losing all SMS and data created since the last backup. Not a major loss, but ** annoying when nothing has changed and the time it will take to restore.
When was the last time you synced your iPhone with iTunes since the backup is updated as the first step during the sync process?
Is there anyway to recover this WITHOUT having to do a full restore or set up as new?
In a word, no.
If I do restore or set up as new, how do I know it's not going to do the same thing tomorrow (like a few other forums threads I've read indicate might happen)?
There is no way to know for certain but I've never experienced the same in the first place. I venture to say having to do this is the exception rather than the rule. -
Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo). -
I recently upgraded from ipad 1 to the new ipad. After synching my new ipad, all of my deleted emails (3000+) keep showing up on my new ipad in my mail section. How can I stop this?
Thanks for responding.
I followed that 'How-To' when I did the transfer and watched iTunes process the backup, it also showed the 'Last Backup' date correctly at the bottom of the iTunes Summary screen. I did a restore from backup to my new iPad and on checking the iPad 4 it seemed that the transfer process duly transferred my books, documents, apps etc but did not transfer my photos and videos (they are all clicked to be included in the sync).
I have now clicked on each video title in iTunes and it tells me that it cannot locate any of the videos!
It seems for some bizarre reason that the transfer process has transferred some of the content of my iPad 1 and deleted other content - I don't get it!
I also have the same content (videos and photos) on my iPhone 4 and have connected that to iTunes, whereby it immediately did a backup and sync, however I still get iTunes telling me that it cannot locate the videos ... it's as though the backup that was taken does not exist - or does 'backup' not mean 'backup'?. -
I use sites with pdf's a lot. Why isn't pdf viewing built into Firefox? The extensions can't keep up with your rapid upgrade program.
Thank you for your post. This forum is for Sony Consumer and Vaio products - for gaming questions and discussions there is a separate PlayStation forum:
http://community.us.playstation.com -
I recently upgraded to ML and now I find that CS5.5 programs crash unexpectedly all the time. Help
I recently upgraded to ML and now I find that CS5.5 programs crash unexpectedly all the time. Is anyone else having this issue and what's the best way to resolve this. Help.
You might check and see if there are any Console entries about what happened when you attempted to launch a CS 5.5 app.
Adobe links its apps with the particular volume on which it is running, and altho' I can't recall specifics, I know in the past I have had to reset Adobe's settings after OS upgrade. I do recall that it's a fairly easy procedure; just don't exactly recall what it is.
BTW, CS 4 runs on Mountain Lion for me. -
I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?
You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme. -
Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep it as my primary.
To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account. To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password. -
I want to upgrade to snow leopard from 10.5.8. Im hesitant to proceed because I'm running iPhoto 7 and word 2004. I want to be sure these programs will still run and I won't lose my photos or the events I have ordered them by. Should i make a partition on my new Iomega external and clone it just in case? I'm running time machine and backing up all the time onto an old LaCie, and right now I have a copy of my iPhoto library on new Iomega, which I recopy every couple of weeks. I got the computer new several years ago and it came with iLife and 10.4 OS I think.
Word 2004 is almost 10 years old, you will not be able to upgrade beyond Snow Leopard with it. IMHO you have gotten your money's worth out of the application and need to upgrade to Office for Mac 2011, this will work just fine and read your old files just fine too. What will not run beyond SL are all PowerPC (PPC) apps such as Word 2004. You will need to update, upgrade or replace any PPC based apps you want to use. I would recommend taking a little time and check for updates to each of your apps. Then open System Profiler (Applications - Utilities - System Profiler) click the Applications link on the left and then look for any PPC based apps, those are the ones that will not run. You can upgrade to SL just fine with the apps you currently have however if you want to go beyond SL (it's already 2 generations behind) you will need to update or upgrade your apps. You can take your time doing it but eventually you're going to have to begin
-
i recently upgraded to maverick and i lost 2 apps i want back they are network utility and mail how can i get them back or where can i find them to download
Hi megamike1969,
I've been losing some apps also in the Dock. As Niel said I think is that you may be able to just drag them back to the Dock, if you can find them.
What I do is open Launchpad and while you're in there, drag the application to the Dock. If you can't locate the apps, then disregard this post.
gl,
kel
Maybe you are looking for
-
FCP Crashes when I try to open a project - just one project.
I even tried going to the Autosave Vault to open the latest saved file. "Finder>Documents>Final Cut Pro Documents>Autosave Vault>Look for the folder with the project's name you are trying to open." Someone else had a similar issue and had success wit
-
HT5557 How do I send an I book as a gift to someone?
How do I send an I book as a gift to someone?
-
OBIEE 11g installation over Oracle Express (XE)
During OBIEE 11g installation we are required to cofigure connection string to DB. We installled Oracle Express (XE) on the same machine with default settings. What should be the connection string in the DB details form? Whether and if so, how should
-
Disk Utility can't verify MBPR Macintosh HD?
I have a 13" Macbook Pro with Retina Display, 2.9 GHz Intel Core i7, 8GB 1600 MHz DDR3, 500 GB storage (of which about 250 GB is free). When I launch Disk Utility, select "Macintosh HD" in the left column and click "Verify Disk," the process begins .
-
Cretaion of new material type in sequence and defining No. range
Dear Pal, Please enlighten with steps for creation of new material type and subsequent configuration and defining No. ranges for the same. thanks v balajee