CCA 3.2.2 Software Pack 8.6.1 and Windows 8

Hi there,
Anyone done this upgrade with Windows 8?  We completed the upgrade successfully and everything updated (it seems), except we cannot connect to the phone system on any vlan at this point.  Cisco told me it was because my laptop i performed the upgrade on was running Windows 8. 
Is this the case?
Thanks,
HelpDesk

Hi Help Desk,
Please be aware that Windows 8 has some very funky security issues, and you will experience this problem... I see it on a daily basis and not just with Cisco equipment, with a wide variety of other vendors equipment.
If you turn of the firewall entirely you should be able to operate as per normal, but how to get it to work with the firewall on is anybody's guess right now.
I am trialing Windows 8 now to see what insane stuff it does, but sadly I have no Cisco equipment anymore to test it on to try and get a better understanding on how it will impact it.
My Suggestion is to only use either Windows XP or Windows 7 with minimal security enabled, especially when working on Cisco appliances.
Cheers,
David Trad.

Similar Messages

  • Software deployment applicable  to Macintosh and Window Computer

    Hi,
    I would like to check if there is any software available to deploy applications to Macintosh and Window computers? Would appreciate if you anyone could help me.
    Thank you!
    Cheers,
    Stephanie

    Hi Stephanie,
    for Mac OSX there is the Apple Remote Desktop http://www.apple.com/remotedesktop/
    For Windows there is the Windows Deployment Service http://msdn.microsoft.com/en-us/library/aa967394(VS.85).aspx
    Regards
    Stefan

  • What Features are provided by Software Packs 8.6.1, 2 and 3

    We have a UC560 customer with Software Pack 8.2 installed and they are wondering what, if any advantages there are if they upgrade to Software Pack 8.6.2.
    I thought there was a good feature Matrix published at one time, but I have been unable to find this. I googled CUE 8.6.5 and Software Pack 8.6.2 but it is as if it vanished from the face of the earth.
    Anybody know where I might come up with this?
    Thanks in advance.

    Hi Paolo,
    I have opened a Cisco TAC case to get this resolved. However it seems that the phone can be seen as a CDP neighbour but it is not getting an IP address and is sitting at the Cisco upgrade splash screen.
    Thanks
    Brian

  • Software Pack 8.1.0 install fails "Phone Firmware Install failed"

    Hello-
    I have a brand new UC540 that I am trying to install the latest software pack on (8.1.0) using CCA 3.0.(1). I have gone straight into Maintenance>Software Upgrade and tried to run the update, but it fails with "Software Pack Installation failed, reason = Phone Firmware Install failed". I try to run the Software Pack install without any phone loads selected and the same thing happens. Also tried wiping the system to factory defaults, but it says the current factory default configuration is missing and I must download the version of the software package.
    Not sure where to go from here, any suggestions?
    Thanks,
    Derek

    Hi
    In addition to David's excellent post make sure you configured the UC's IP Address as default gateway. In my case I had the exactly same problem. After a closer look I noticed that the UC used a different IP address for some tftp requests than the one from the directly connected network.
    Connection received from 10.1.10.2 on port 55103 [30/07 12:04:17.989]
    Read request for file . Mode octet [30/07 12:04:17.989]
    Using local port 65031 [30/07 12:04:17.990]
    Peer returns ERROR -> aborting transfer [30/07 12:04:18.007]
    Vlan1                      unassigned      YES NVRAM  up                    up     
    Vlan100                    unassigned      YES NVRAM  up                    up     
    NVI0                       10.1.10.2       YES unset  up                    up     
    BVI1                       192.168.10.1    YES NVRAM  up                    up     
    BVI100                     10.1.1.1        YES NVRAM  up                    up     
    Loopback0                  10.1.10.2       YES NVRAM  up                    up     
    It looks like the UC used the Loopback0 IP address which was unknown because of the lack of a route/default gw. after i configured the 192.168.10.1 as default gw, the CCA update run trough like a charm

  • Bad Software Update: Creative Media Explorer 6.21.08 Software Pack for

    I've just tried installing the 9 April update for the Zen Vision:M 30GB - the Creative Media Explorer 6.2.08 Software Pack for the Zen Vision:M30 and 60 GB. This is supposed to run under Vista. Well, it launches fine, but someone forgot to put the install dialogue as the top-level window in the installshield. The dialogue is hopelessly trapped behind the snazzy Creative background screen - it's not a separate application, so there's no way to switch it to the front. If you kill off the upgrade in task manager, you can see the dialogue for a few seconds, then it dies as well. Creative - can you please pull this back and repackage it so that it actually works? Thanks!

    Hi,
    I have a similar problem with my 8gb?zen. On installation of the sen media explorer I get the error message "Microsoft(C) Register Server has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Installation completes but media explorer is not installed. As mentioned it doesnt mean the end of the player but it's nice to have full functionality from your new product. The price paid for these players, I think the least we can expect is a working suite of software. Actually, customer service gave up on me and said it is a Vista issue and they have not heard of such a problem before. Hmmmm, unlikely, unless my Vista 32bit (recently installed) configuration is unique.... and you don't exist.?I think they only way to get a solution is if others who have a similar issue post here. Hopefully some genius will figure it out, or Creative will address the issue. Mat

  • Problem installing stuff from software pack N95, m...

    Hi,
    I bought a Nokia N95 few days ago.
    I have success fully installed PC suite.
    But,
    when I try to install stuff from the "Software Pack CD" it gives me error about missing "MSVCR80.dll".
    Can some one tell me how to fix.
    I went back to the shop and got the CD changed, but it didn't help.
    Also please tell me how can I use Navigation on N95. Do I have to buy the liscence from nokia or there is some other way.

    Hi lafanter
    Is your Windows NET 2.0 or 3.0 Framework OK?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to check which software pack I am running on UC560?

    I need to figure out if my UC560 needs a software pack upgrade. The show version on the device console shows following. What software pack does it map to?
    Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Tue 04-Sep-12 20:45 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)XA3, RELEASE SOFTWARE (fc1)
    dcVAST-UC560 uptime is 6 weeks, 3 days, 14 hours, 56 minutes
    System returned to ROM by power-on
    System restarted at 17:32:32 CST Thu Feb 20 2014
    System image file is "flash:/uc500-advipservicesk9-mz.151-4.M5"
    Last reload type: Normal Reload
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected]
    Cisco UC560-T1E1-K9 (MPC8378) processor (revision 0x100) with 497664K/26624K bytes of memory.
    Processor board ID <Removed>
    MPC8378 CPU Rev: Part Number 0x80C4, Revision ID 0x21
    64 User Licenses
    4 Gigabit Ethernet interfaces
    24 Serial interfaces
    2 terminal lines
    1 Channelized T1/PRI port
    1 Virtual Private Network (VPN) Module
    4 Voice FXO interfaces
    4 Voice FXS interfaces
    1 Voice MoH interface
    1 cisco service engine(s)
    256K bytes of non-volatile configuration memory.
    250880K bytes of ATA CompactFlash (Read/Write)

    Refer to this: https://supportforums.cisco.com/document/36746/uc-500-software-packs
    You are one software pack behind up to date.

  • Clean access rules and Windows service pack 3

    I am having a small issue with our Clean Access Manager blocking any Windows XP computer that has service pack 3 installed. The main failure it is giving in the reports is this
    Failed Checks:
    pc_Windows-XP-SP2, Registry Check [\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 2]
    pc_Windows-XP-SP1, Registry Check [\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 1]
    The key that is there when sp3 is installed is this:
    \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDVersion contains Service Pack 3
    I have verified that pc_Windows-XP-SP1 and pc_Windows-XP-SP2 are there as well as created a check for service pack 3 eric_pc_Windows-XP-SP3 and added the check to the rules governing windows updates for XP pro/home and windows media edition. But for some reason they are not taking effect. The CAM is running version 4.1.3.1 and the the CAA is version 4.1.3.2. Any assistance would be greatly appreciated.
    Thank you,
    Eric

    Here is the configuration guide for the Clean Access Manager which will help you :
    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/413/cam/m_instal.html

  • (Deployment) Minimum Software required for BUILD server and IIS WebServer

    We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
    The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
    In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
    The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
    So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
    If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
    What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
    Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
    Thanks in advance for the advice.

    Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
    To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install.  Choose a Custom install.  You'll be presented with a drop down list for the Enterprise components.  Deselect everything and then look for the Developer Components option.  You may have to drill down into one of the levels to find it.  Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK.  Select it to install it.
    Jason

  • Will the new Fire Fox run so well as the actua in my pc? I have an Intel Pentium 4 CPU 2.40 GHz 736 MB RAM and Windows XP Version 2002 Service Pack 2 and Fire Fox 3.6.24 or it will take my pc more ressources than currently?

    I have an Intel Pentium 4 CPU 2.40 GHz 736 MB RAM and Windows XP Version 2002 Service Pack 2 and Fire Fox 3.6.24 or it will take my pc more ressources than currently?

    Pay attention to what rkaufmann87 is saying, because I agree.
    Chrome is very resource intensive.
    It is possible you are running other memory intensive apps.
    You have a lot of 3rd party additions loaded at boot time.  Do you really need all of them?  Even after you get rid of MacCleaner (as suggested by rkaufmann87).
    Do you really need the seagate and WD drive software?  The Mac is fairly good at accessing disks without 3rd party intervention.
    Any of the 3rd party additions listed by EtreCheck that you do not need, you should consider uninstalling.
    That fact that you have
        171.19 GB    Page-ins
    in just about 4 days, says you have about 0.5megabytes per second.  That is a huge load on your disk drive.
    Either cut back on the RAM intensive apps, or get more RAM.  At least 8GB, but if your Mac supports it, 16GB.  Crucial.com and MacSales.com (OWC) are well respected by the long term forum contributes.

  • Software and Windows 8

    Hi there, can somebody PLEASE tell me how i can download the desktop software for my pc. I have a Blackberry 9300 and Windows 8 on my pc!!! URGENT

    I would recommend the most recent Desktop Software, version 7. Download it here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Desktop Software has encountered a problem and needs to close

    When I try to open Blackberry Desktop the message I get is that Blackberry Desktop Software has encountered a problem and needs to close.  I have a Blackberry Bold 9700 and as a result I cannot sync.  Does this mean I need to uninstall and reinstall?  If I reinstall will I lose the update that I have on my phone that has changed the interface?  Will I have to reinstall that as well?
    Thanks for any help or advice you can give me.

    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I bought the new ipad (ipad 3) in July 2012.  what software did it come with and does it have siri?

    i bought the new ipad (ipad 3) in July 2012.  what software did it come with and does it have siri?

    The new iPad comes with iOS 5.1.1.
    To get all new functionality and Siri, you need to update to iOS 6.
    Be aware that if you were a Google Maps App user this has been replaced by version 1.0 of Apple's own new Maps App.
    From the many user reviews, Apple's Map App is still a work in progress.
    You can still access Google Maps from the Safari web browser.
    Also, the YouTube app has, also, made a disappearing act.
    You can use mobile YouTube from Safari to still view YouTube or a YouTube client app called Jasmine or download the Google YouTube App for iPhone. Google is working on a new YouTube App for iPad and isn't available, as yet.

  • I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

    I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

    stuckoncc wrote:
    I updated the latest version of iOS software on my Macbook Pro
    iOS is on iPhones and iPads.
    Are you using an iPhone or iPad?

  • "I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't.  How do I fix?

    I just updated the software on my iphone 4 and prior to updating I could double click and start the camera without logging in, now I can't.  How do I fix?

    Nothing to fix...things have changed...slide the camera icon up now..no more double tap.

Maybe you are looking for