CCMS Activation for SAP XI

Hi SAP XI experts!
I implemented a simple File to IDOC scenario with SAP XI 7.0 for SAP ECC 6.0 system.
Now I set up Business Process Monitoring within SAP Solution Manager.
There I can monitor the Interface Monitoring.
Here I am able to give Application Monitor, CCMS Monitor, Analyse & Monitoring Tools, Monitoring Activities.
Question:
What are the steps to activate CCMS monitoring for SAP XI?
What is the CCMS path to monitor the XI messages from SXI_MONITOR?
Thank you very much!
regards
Holger Thomasson

Hi!
Many thanks!
I mean how can monitor the following issues?
a) on XI side: tcode SXI_MONITOR
Are there some undelivered messages?
b) on SAP ERB sind: tcode BD87
Are there some IDOC that have the status other than "green"
Thank you!
regards

Similar Messages

Unicode Check Active For SAP Script

How to set Unicode Check Active attribute for SAP Script and Smartform

Hello,
the Unicode Check Active flag is a program attribute. You can set this flag to check the syntax of an ABAP program. It is not available for SAPScript forms or SAP Smartforms. The attached screenshot shows how the flag is set in the attributes of an example program.
Best Regards

Group GL activation for SAP BPC.

Dear all,
In one Company we are implementing Planning, IGAAP consolidation and IFRS consolidation.
In accounts GL grouping, all three tracks will be following different groupings. So if we suggest them to update group GL in SAP, we need clarification on the same.
What are the possible ways?
1. Do separate grouping in SAP ECC (if its possible?)
2. Upload Data from BI 3 times (again, how, if its possible?)
3. Maintain Mapping of GLs in Conversion file (for all 3 tracks i.e Planning, IGAAP Consolidation & IFRS Consolidation)
If not going by best practice suggested by SAP, which is to have planning & consolidation at Group GL level, then it would be with operating GLs !!
What do you suggested, how do we approach this issue ?
Need your inputs from previous client implementation and personal experiences.
If any of you followed Group gl please give us the solution.
Looking forward to your quick reply.
& Thanks for your time in advance.
Satya

Hi
I am working in BPC NW 75 but not able to scope the member based on value
can u clarify in the above script are u scoping based on the value of dimension member
Regards,

Troubleshooting of CCMS Configuration in SAP-PI 7.1

Hi
I have configured the CCMS configuration in PI 7.1 My intention to raise the email alerts if anything goes wrong
I have done it using the below weblogs....
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3187. [original link is broken] [original link is broken] [original link is broken]
I have done the following steps in 000 client
1. activated the central Dispatching job
2. Configured the SCOT
3. created the RFC destination to target client (200 in my case ) .. as per note 0176492
4. Specified the parameters in CCMS_OnAlert_Email_V2 .Sender id existing user in 000 client.
Below are the parameters i have specified in Auto reaction method
SENDER- SAP*
RECIPIENT- mentioned mail address
RECIPIENT-TYPEID- U
Here i do have one doubt on sender id. do we need to specify the dialog user or does SAP* serve our purpose.?
I hope everything as per procedure and now i do see alerts in RZ20 t-code dnt get any email alerts
Can someone through some light on this.. and guide how to troubleshoot my configuration.
Thanks in Advance.
Regards,
Deep

You can use any dialog/system user, the user must have a valid e-mail address populated on the user master though.
Regards
Juan

Cannot download CCMAGENT.SAR to install the SAPCCM4X ccms agent for ABAP

I realize that my CCMS (RZ20) was empty (of data) because there was no agent filling it.
Following the documentation from sap, I have to download and register the SAPCCM4X ccms agent for ABAP (I have a SAP Netweaver 7.0 (2004s) ABAP Trial Version) but it has been impossible. I don't understand what is the error with my Download Manager.
Can somebody send me these files?
ccmagent_18-20000961.sar
CCMAGENT.SAR
I found it under:
Support Packages and Patches>Entry by Application Group>SAP NetWeaver>SAP NETWEAVER>SAP NETWEAVER 7.0>Entry by Component>Application Server ABAP>SAP KERNEL 7.00 32/64-BIT>Windows-->Database Independent.
Or Am I completely wrong in everything?
Regards,
Herman.

Hello Herman,
Graham is right. You don't need an agent, the system should be provide monitoring data at once.
But in your case
> (I have a SAP Netweaver 7.0 (2004s) ABAP Trial Version)
the reason will most probably the deactivated monitoring infrastructure. AFAIK the parameter rdisp/autoabaptime is set to 0 in the Trial Version. Simply delete it from the instance profile so the default value 300 will be activated. Same for the parameter alert/MONI_SEGM_SIZE. If the parameter is set to 0, delete it. After restarting the system you should see values in rz20.
Regards, Michael

Crystal Report for SAP B1 8.8

Hi All !
I can not finish for designing template layout for Sales Quotation by Crystal Report 2008 for SAP 8 8
I have already done for template of sale quotation but when i print preview in SAP for this one, system did not understood and it get all data from Sale quotation in database. I would like to assign specify Sales Quotation Doc number which i want to Print preview on my template.
How can i assign or how can i have to create what parameter.
Thanks!

Hi,
Try this:
For Sales Order
The DocKey@ token is mandatory in a Crystal Reports .rpt file that you want to use as a
layout. The DocKey@ token is used to identify the current active document. SAP Business One
populates its value when you preview or print a layout.
When you apply the DocKey@ token, in the Select Expert window, you need to specify a filter
condition, such as:
{ORDR.DocEntry}={DocKey@}
If the DocKey@ token does not exist, create a new parameter with the following settings:
In the Name field, enter DocKey@
In the Type dropdown list, select Number
In all other fields, leave the default settings
Then Save report as layout to B1
Try previewing this layout as you will notice it will no longer ask for a parameter.
This likely behaves as a standard layout
Try searching forums or channel portal regarding Parameter Tokens
Thanks,
JP

Purpose of RSTXTRAN program for SAP-Script ?? ??

Purpose of RSTXTRAN program for SAP-Script ?? ??
when it is required to run that program ?

Hi sarit,
Purpose of RSTXTRAN program for SAP-Script Transfer of SAP script Texts to a Correction.
The report RSTXTRAN allows a set of SAP script texts (or the text key) to be transferred to a correction or repair of the transport system. The name of the correction/repair can either be transferred as a report parameter, or the correction/repair can be selected later in a selection window. The text key can be qualified generically using the asterisk character (*).
When the report has been executed, the list of selected texts appears. Individual texts can be deselected in this list. When the function "Continue" is executed, the final list of texts which are to be transferred is displayed. The transfer of texts to the correction/repair can now be activated by the appropriate function, and must be confirmed in a dialog box.The requirements for this as follows.
There is a correction/repair in which the selected text keys can be entered, if it is not being processed. The report can only insert text keys in corrections or repairs, not however in transport requests. However, the objects contained in a correction can be transferred to a transport request with the correction and transport system transaction.
It should also be noted that the report selects texts in the current client, but that the transport system generally exports texts from client 000.
When the report has been executed,the output can be a list of the selected texts. Information about whether transfer to the correction/repair was possible is displayed for each text key.
Reasons for failed transfer include
o the correction/repair is currently being processed
o the correction/repair does not exist
For Example
All German standard texts with the ID ST, whose names begin with SAPSCRIPT, are to be entered in the correction B20K009999. The report parameters are then assigned values as follows:
o Correction: B20K009999
o Text object: TEXT
o Text name: SAPSCRIPT*
Thanks,
Usha

Error when creating a business activity in SAP BPC 10.1

Hi Experts,
I am failing to save a new business activity in SAP BPC 10.1 when setting up a new business process flow. I can validate the the activity successfully, however when I try to save the activity i receive the following message " Saving the workspace failed because of a missing root folder; contact your system administrator"
Please can anyone help me with why I am receiving this message?
Thanks so much

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Error in denesting activity for the luggage trading items.

Hello experts,
This has reference to the Denesting activity for the luggage trading items in SAP. There has been an error in the basic configuration for this activity, as the denested stock is being incorrectly valued & consequently a wrong impact is being posted to the P&L. The actual landed cost for the nested item is not flowing to the denested items.
We have been correcting this manually till now through an FI JV. However we need to correct the system urgently as this has a serious implication & the impact is considerably high. E
Procedure for De-nesting:
The procedure for De-nesting is being carried out at BLL location & at branches. Transaction code used for the same is MB1A. Two separate documents are prepared for de-nesting.
In MB1A, first document is being entered for Movement type 201 for depleting Nested item stock (Ref doc no 65489076) & subsequent document entered for movement type 202 for creating de-nested item stock (Ref doc no 6548769659).
The MAP for Nested Item is correctly being updated with each receipt through Mov Type 101. However the MAP for denested item codes is not being updated since the stock creation is through mov type 202. The Old MAP updated at the time of code creation remains stagnant. Thus the denested items are being valuated with an old MAP rate.
In normal condition, the value of both 201 & 202 should match. As a result, the gap between the two kept on increasing & the inventory gets overvalued. The entries are posted to 8765987 (Consum-Intrnl-TMu2013 Dom) GL or 8765988 (Consum-Intrnl-TM-Imp) GL.
Reference Accounting doc no 3025689745 & 1589645896 for above referred material docs.
Please advice on this issue
Thanks,
Ratnam

Activating ML is necessary because in my customer's company sell goods at planed price then revaluate value of inventories and COGS at actual price in the end of each of period. So we decide to use standard price control for trading goods and active Material ledger.
end of period, we run period procedure of ML for trading goods, we expect allocation different amount, revaluate inventories and consumption. Run revaluation step of costing run in ML, we revaluate all ending inventories and consumption transaction except billing transaction. So, we think that we need to run Ke27 to revaluate all line item document in COPA from billing.
so anybody to help me revaluate consumption amount from billing at actual price in end of period?
thanks in advance!

Creation of RFC destination for SAP-Access Connectivity

Hi,
 I want to create a RFC destination for SAP-Access connectivity.
Can I get some help regarding it's connection type,activation type and gateway options required for the same.
Regrads,
Anthony D'souza

Hi
Please see the following:
1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
TABLE DBCON Entry can be like this...depends on your External database..
CON_NAME Raj Logical name for connection
DBMS MSS Microsoft SQL Server
USER_NAME <User name> For SQL Server
PASSWORD <password> " "
CON_ENV MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
DB_RECO Availability type for an open database connect
FUNCTION z_houston_connect.
""Local interface:
EXEC SQL.
CONNECT TO 'RAJ' AS 'V'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'V'
ENDEXEC.
*- Get the data from MS-SQL Server
EXEC SQL.
open C1 for
select
l.loc_id,
l.loc_name,
a.acc_id,
a.acc_name,
d.person
from ho_loc_mast as l
inner join snd_acc_mast as a on l.loc_id = a.loc_id
inner join snd_acc_addr as d on a.loc_id = d.loc_id and
a.acc_id = d.acc_id
where l.loc_id = '001'
ENDEXEC.
DO.
EXEC SQL.
FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
ENDEXEC.
IF sy-subrc = 0.
PERFORM loop_output.
ELSE.
EXIT.
ENDIF.
ENDDO.
EXEC SQL.
CLOSE C1
ENDEXEC.
ENDFUNCTION.
Regards,
Raj

Open Item Management activation for GL accounts in ECC 6.00

Hi Experts,
There is an issue about Open item Management activation for GL line items of FBLL03 for VAT GL code. Unexpectdly do not check the open item management in VAT GL account Master record while created the GL master record in 2007. Now we activated Open item Management in GL master record for same GL to nulify the balances with setoff account and same reversed after activation. Now issue is how it is possible to activate Open item Management for previously posted documents ? Is there any standard SAP Program for ECC 6.00 Release SAP _APPL 600.
Please revert.
Best Rgds
SumaMani

Hi PVC,
I got below mentioned message while execute the suggested program in SAP.Please suggest
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Best Rgds
SumaMani

Crystal Report doesn't prompt for SAP credentials / errors out on refresh

2 Environments tested with same results:

BOE XI 3.1 SP2 & BOE XI 3.1 SP2 FP2.5 
SAP Intg Kit on mirrored SP/FP levels in each environment.

We've been successfully creating Crystal Reports against BEx queries in BW for months now as well as ECC master data. We've also built universes and have WebI reports actively working against similar BEx queries in the same. However, we're getting some curious behavior when we refresh the Crystal Reports against BEx queries in BW. Verified all necessary transports and authorizations have been provided for both authoring, as well as refreshing/viewing on demand, etc.

We've setup all the Crystal Reports we're testing to:

a) Use custom database logon information specified here. 
b) Specify a custom driver, leveraging the crdb_bwmdx driver 
c) Prompt the user for database login

We have not enabled SNC as of yet.

1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.

2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected

However:

3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:

Interactive Viewer: "Error in File %reportname%: Encapsulating Page Failed" 
Java Viewer: "Error in File %reportname%: Database Connection Error"

Nothing glaring in the event logs on the BO servers or in the Crystal logs that I can see, however just because it isn't spitting a specific error in the crystal logs doesn't mean I'm not missing something because I don't know what to look for behavior wise. To reduce the liklihood that it has to do with the way the report was built, we've tried against the same query by building a report using standard methods, as well as the SAP Toolbar using a very plain jane report. Same behavior.

Thoughts?
Edited by: Jay Riddle on Mar 1, 2010 8:55 PM

Hi,
1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.
>> Which authentication are you using to logon to InfoView ? Whats the configuration in the Universe Connection for Authentication ?
2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected
>> The user is using which authentication ? and against which system does he log on ?
However:
3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:
>> The user is using which authentication ? and against which system does he log on ?
>> You mentioned security restrictions and I assume we talk about BI authorizations in form of data level security. If so - does the BW query include the authorization variables ?
Ingo

LiveCache for SAP HCM Idocs ECC6EHP4 on windows/mssql

Hello Gurus,
We am trying to process inbound HR Idoc (message type HRMD_A) from a java system and during the process it stucks in error code 51 and error message says - "Unable to establish connection to LiveCache".
Now we dont have any Livecache setup here but we built the system based upon a system copy and i can see some LiveCache system maintained there in tcode DB59 and DBACOCKPIT but we dont have those systems in our landscape as the system copy was from SAP originally.
Now the question is Do we need LiveCache for SAP HR HCM module specifically to proess HR Idocs (inbound only, outbound process works fine).
I read a lot of stufff on live cache technology but i think that is required only for SAP SCM(Supply chain management).
If i need to install livecache what would be the ideal steps, currently my ECC EHP4 system is on windows 2003 server/ MSSQL 2005.
Do i need to install MAXDB along with MSSQL to support livecache as its only supported on MaxDB(correct me if i am wrong).
Any reply will be highly appreciated.
Mani

Hello Natalia,
Thank you for your reply, but we want to resolve it if possible without SAP support
please find my answers below for your uestion
-> Is your system connected to CRM system?
No
-> Is your system connected to SCM system?
No
-> What connections you saw in /ndb59 on your system?
To a unknown SAP SID which is in red color, that means not active.
-> What SAP components, with SP number, installed on your system?
WE have basically SAP ERP with SAP HR as the main component we are working on this system.
following is the full list of component
S/w component     Release     Level     Highest support Package     S/w Description
SAP_ABA     701     4     SAPKA70104     Cross-Application Component
SAP_BASIS     701     4     SAPKB70104     SAP Basis Component
PI_BASIS     701     4     SAPK-70104INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0          -     SAP Solution Tools Plug-In
SAP_BS_FND     701     1     SAPK-70101INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     2     SAPKW70102     SAP Business Warehouse
LCAPPS     2005_700     5     SAPKIBHD05     LC Applications (LCAPPS) 2005_700
SAP_AP     700     14     SAPKNA7014     SAP Application Platform
WEBCUIF     700     1     SAPK-70001INWEBCUIF     SAP WEBCUIF 700
SAP_APPL     604     1     SAPKH60401     Logistics and Accounting
SAP_HR     604     4     SAPKE60404     Human Resources
SAP_HRCAR     604     4     SAPK-60404INSAPHRCAR     Sub component SAP_HRCAR of SAP_HR
SAP_HRCAT     604     4     SAPK-60404INSAPHRCAT     Sub component SAP_HRCAT of SAP_HR
SAP_HRCAU     604     4     SAPK-60404INSAPHRCAU     Sub component SAP_HRCAU of SAP_HR
SAP_HRCBE     604     4     SAPK-60404INSAPHRCBE     Sub component SAP_HRCBE of SAP_HR
SAP_HRCBR     604     4     SAPK-60404INSAPHRCBR     Sub component SAP_HRCBR of SAP_HR
SAP_HRCCA     604     4     SAPK-60404INSAPHRCCA     Sub component SAP_HRCCA of SAP_HR
SAP_HRCCH     604     4     SAPK-60404INSAPHRCCH     Sub component SAP_HRCCH of SAP_HR
SAP_HRCCL     604     4     SAPK-60404INSAPHRCCL     Sub component SAP_HRCCL of SAP_HR
SAP_HRCCN     604     4     SAPK-60404INSAPHRCCN     Sub component SAP_HRCCN of SAP_HR
SAP_HRCDE     604     4     SAPK-60404INSAPHRCDE     Sub component SAP_HRCDE of SAP_HR
SAP_HRCDK     604     4     SAPK-60404INSAPHRCDK     Sub component SAP_HRCDK of SAP_HR
SAP_HRCES     604     4     SAPK-60404INSAPHRCES     Sub component SAP_HRCES of SAP_HR
SAP_HRCFI     604     4     SAPK-60404INSAPHRCFI     Sub component SAP_HRCFI of SAP_HR
SAP_HRCFR     604     4     SAPK-60404INSAPHRCFR     Sub component SAP_HRCFR of SAP_HR
SAP_HRCGB     604     4     SAPK-60404INSAPHRCGB     Sub component SAP_HRCGB of SAP_HR
SAP_HRCHK     604     4     SAPK-60404INSAPHRCHK     Sub component SAP_HRCHK of SAP_HR
SAP_HRCID     604     4     SAPK-60404INSAPHRCID     Sub component SAP_HRCID of SAP_HR
SAP_HRCIE     604     4     SAPK-60404INSAPHRCIE     Sub component SAP_HRCIE of SAP_HR
SAP_HRCIN     604     4     SAPK-60404INSAPHRCIN     Sub component SAP_HRCIN of SAP_HR
SAP_HRCIT     604     4     SAPK-60404INSAPHRCIT     Sub component SAP_HRCIT of SAP_HR
SAP_HRCJP     604     4     SAPK-60404INSAPHRCJP     Sub component SAP_HRCJP of SAP_HR
SAP_HRCKR     604     4     SAPK-60404INSAPHRCKR     Sub component SAP_HRCKR of SAP_HR
SAP_HRCMX     604     4     SAPK-60404INSAPHRCMX     Sub component SAP_HRCMX of SAP_HR
SAP_HRCMY     604     4     SAPK-60404INSAPHRCMY     Sub component SAP_HRCMY of SAP_HR
SAP_HRCNL     604     4     SAPK-60404INSAPHRCNL     Sub component SAP_HRCNL of SAP_HR
SAP_HRCNO     604     4     SAPK-60404INSAPHRCNO     Sub component SAP_HRCNO of SAP_HR
SAP_HRCNZ     604     4     SAPK-60404INSAPHRCNZ     Sub component SAP_HRCNZ of SAP_HR
SAP_HRCPH     604     4     SAPK-60404INSAPHRCPH     Sub component SAP_HRCPH of SAP_HR
SAP_HRCPT     604     4     SAPK-60404INSAPHRCPT     Sub component SAP_HRCPT of SAP_HR
SAP_HRCRU     604     4     SAPK-60404INSAPHRCRU     Sub component SAP_HRCRU of SAP_HR
SAP_HRCSE     604     4     SAPK-60404INSAPHRCSE     Sub component SAP_HRCSE of SAP_HR
SAP_HRCSG     604     4     SAPK-60404INSAPHRCSG     Sub component SAP_HRCSG of SAP_HR
SAP_HRCTH     604     4     SAPK-60404INSAPHRCTH     Sub component SAP_HRCTH of SAP_HR
SAP_HRCTW     604     4     SAPK-60404INSAPHRCTW     Sub component SAP_HRCTW of SAP_HR
SAP_HRCUS     604     4     SAPK-60404INSAPHRCUS     Sub component SAP_HRCUS of SAP_HR
SAP_HRCVE     604     4     SAPK-60404INSAPHRCVE     Sub component SAP_HRCVE of SAP_HR
SAP_HRCZA     604     4     SAPK-60404INSAPHRCZA     Sub component SAP_HRCZA of SAP_HR
SAP_HRGXX     604     4     SAPK-60404INSAPHRGXX     Sub component SAP_HRGXX of SAP_HR
SAP_HRRXX     604     4     SAPK-60404INSAPHRRXX     Sub component SAP_HRRXX of SAP_HR
EA-IPPE     404     1     SAPK-40401INEAIPPE     SAP iPPE
EA-APPL     604     1     SAPK-60401INEAAPPL     SAP Enterprise Extension PLM, SCM, Finan
EA-DFPS     604     1     SAPK-60401INEADFPS     SAP Enterprise Extension Defense Forces
EA-FINSERV     604     1     SAPK-60401INEAFINSRV     SAP Enterprise Extension Financial Servi
EA-GLTRADE     604     1     SAPK-60401INEAGLTRAD     SAP Enterprise Extension Global Trade
EA-HR     604     4     SAPK-60404INEAHR     SAP Enterprise Extension HR
EA-HRCAR     604     4     SAPK-60404INEAHRCAR     Sub component EA-HRCAR of EA-HR
EA-HRCAT     604     4     SAPK-60404INEAHRCAT     Sub component EA-HRCAT of EA-HR
EA-HRCAU     604     4     SAPK-60404INEAHRCAU     Sub component EA-HRCAU of EA-HR
EA-HRCBE     604     4     SAPK-60404INEAHRCBE     Sub component EA-HRCBE of EA-HR
EA-HRCBR     604     4     SAPK-60404INEAHRCBR     Sub component EA-HRCBR of EA-HR
EA-HRCCA     604     4     SAPK-60404INEAHRCCA     Sub component EA-HRCCA of EA-HR
EA-HRCCH     604     4     SAPK-60404INEAHRCCH     Sub component EA-HRCCH of EA-HR
EA-HRCCN     604     4     SAPK-60404INEAHRCCN     Sub component EA-HRCCN of EA-HR
EA-HRCDE     604     4     SAPK-60404INEAHRCDE     Sub component EA-HRCDE of EA-HR
EA-HRCDK     604     4     SAPK-60404INEAHRCDK     Sub component EA-HRCDK of EA-HR
EA-HRCES     604     4     SAPK-60404INEAHRCES     Sub component EA-HRCES of EA-HR
EA-HRCFI     604     4     SAPK-60404INEAHRCFI     Sub component EA-HRCFI of EA-HR
EA-HRCFR     604     4     SAPK-60404INEAHRCFR     Sub component EA-HRCFR of EA-HR
EA-HRCGB     604     4     SAPK-60404INEAHRCGB     Sub component EA-HRCGB of EA-HR
EA-HRCHK     604     4     SAPK-60404INEAHRCHK     Sub component EA-HRCHK of EA-HR
EA-HRCID     604     4     SAPK-60404INEAHRCID     Sub component EA-HRCID of EA-HR
EA-HRCIE     604     4     SAPK-60404INEAHRCIE     Sub component EA-HRCIE of EA-HR
EA-HRCIN     604     4     SAPK-60404INEAHRCIN     Sub component EA-HRCIN of EA-HR
EA-HRCIT     604     4     SAPK-60404INEAHRCIT     Sub component EA-HRCIT of EA-HR
EA-HRCJP     604     4     SAPK-60404INEAHRCJP     Sub component EA-HRCJP of EA-HR
EA-HRCKR     604     4     SAPK-60404INEAHRCKR     Sub component EA-HRCKR of EA-HR
EA-HRCMX     604     4     SAPK-60404INEAHRCMX     Sub component EA-HRCMX of EA-HR
EA-HRCMY     604     4     SAPK-60404INEAHRCMY     Sub component EA-HRCMY of EA-HR
EA-HRCNL     604     4     SAPK-60404INEAHRCNL     Sub component EA-HRCNL of EA-HR
EA-HRCNO     604     4     SAPK-60404INEAHRCNO     Sub component EA-HRCNO of EA-HR
EA-HRCNZ     604     4     SAPK-60404INEAHRCNZ     Sub component EA-HRCNZ of EA-HR
EA-HRCPH     604     4     SAPK-60404INEAHRCPH     Sub component EA-HRCPH of EA-HR
EA-HRCPT     604     4     SAPK-60404INEAHRCPT     Sub component EA-HRCPT of EA-HR
EA-HRCRU     604     4     SAPK-60404INEAHRCRU     Sub component EA-HRCRU of EA-HR
EA-HRCSE     604     4     SAPK-60404INEAHRCSE     Sub component EA-HRCSE of EA-HR
EA-HRCSG     604     4     SAPK-60404INEAHRCSG     Sub component EA-HRCSG of EA-HR
EA-HRCTH     604     4     SAPK-60404INEAHRCTH     Sub component EA-HRCTH of EA-HR
EA-HRCTW     604     4     SAPK-60404INEAHRCTW     Sub component EA-HRCTW of EA-HR
EA-HRCUS     604     4     SAPK-60404INEAHRCUS     Sub component EA-HRCUS of EA-HR
EA-HRCVE     604     4     SAPK-60404INEAHRCVE     Sub component EA-HRCVE of EA-HR
EA-HRCZA     604     4     SAPK-60404INEAHRCZA     Sub component EA-HRCZA of EA-HR
EA-HRGXX     604     4     SAPK-60404INEAHRGXX     Sub component EA-HRGXX of EA-HR
EA-HRRXX     604     4     SAPK-60404INEAHRRXX     Sub component EA-HRRXX of EA-HR
EA-PS     604     1     SAPK-60401INEAPS     SAP Enterprise Extension Public Services
EA-RETAIL     604     1     SAPK-60401INEARETAIL     SAP Enterprise Extension Retail
FINBASIS     604     1     SAPK-60401INFINBASIS     FINBASIS
C-CEE     110_604     0          -     ECC Core Country Versions for EEM Countr
CPRXRPM     450_700     4     SAPK-45004INCPRXRPM     SAP xRPM/cProjects/cFolders 4.50 (ABAP)
ECC-DIMP     604     1     SAPK-60401INECCDIMP     DIMP
ECC-SE     604     1     SAPK-60401INECCSE     ESA FAST TRACK (ERP) 2005
ERECRUIT     604     1     SAPK-60401INERECRUIT     ERECRUIT
FI-CA     604     1     SAPK-60401INFICA     FI-CA
FI-CAX     604     1     SAPK-60401INFICAX     FI-CA Extended
HR-CEE     110_604     0          -     HR country version for CEE countries
HR-CEECBG     110_604     0          -     Sub component HR-CEECBG of HR-CEE
HR-CEECCO     110_604     0          -     Sub component HR-CEECCO of HR-CEE
HR-CEECCZ     110_604     0          -     Sub component HR-CEECCZ of HR-CEE
HR-CEECHR     110_604     0          -     Sub component HR-CEECHR of HR-CEE
HR-CEECHU     110_604     0          -     Sub component HR-CEECHU of HR-CEE
HR-CEECPL     110_604     0          -     Sub component HR-CEECPL of HR-CEE
HR-CEECRO     110_604     0          -     Sub component HR-CEECRO of HR-CEE
HR-CEECSI     110_604     0          -     Sub component HR-CEECSI of HR-CEE
HR-CEECSK     110_604     0          -     Sub component HR-CEECSK of HR-CEE
HR-CEECTR     110_604     0          -     Sub component HR-CEECTR of HR-CEE
HR-CEECUA     110_604     0          -     Sub component HR-CEECUA of HR-CEE
HR-CEEGXX     110_604     0          -     Sub component HR-CEEGXX of HR-CEE
HR-CEERXX     110_604     0          -     Sub component HR-CEERXX of HR-CEE
INSURANCE     604     1     SAPK-60401ININSURANC     SAP Insurance
IS-CWM     604     1     SAPK-60401INISCWM     Industry Solution Catch Weight Managemen
IS-H     604     1     SAPK-60401INISH     SAP Healthcare
IS-M     604     1     SAPK-60401INISM     SAP MEDIA
IS-OIL     604     1     SAPK-60401INISOIL     IS-OIL
IS-PRA     604     1     SAPK-60401INISPRA     SAP IS-PRA
IS-PS-CA     604     1     SAPK-60401INISPSCA     IS-PS-CA 604 Upgrade
IS-UT     604     1     SAPK-60401INISUT     SAP Utilities/Telecommunication
LSOFE     604     1     SAPK-60401INLSOFE     LSOFE
PLMWUI     700     1     SAPK-70001INPLMWUI     SAP PLM Web UI
RTLWFM     100     3     SAPK-10003INRTLWFM     RTLWFM 100: Add-On Installation
SEM-BW     604     1     SAPK-60401INSEMBW     SEM-BW
SLL-LEG     720     1     SAPK-72001INSAPSLL     SLL-LEG 720 : Add-On Installation
SLL_PI     720_603     1     SAPK-72901INSLLPI     GTS Plug-In
WFMCORE     200     11     SAPK-20011INWFMCORE     WFMCORE 200 Upgrade: Meta-Commandfile (D
GRC_RM_ABP     200     11     SAPK-20011INGRCRMABP     GRC_RM_ABP 200: Add-On Installation
AIN     400     2     SAPK-40002INAIN     AIN 400 : Add-On Supplement
AOFTOOLS     400_700     0          -     Add-On Assembly Kit (AOFTOOLS 400_700)
GRCPCRTA     250_700     5     SAPK-25605INGRCPCRTA     GRCPC 250 RTA for 700
GRCSPC     250     5     SAPK-25005INGRCSPC     GRC Process Control 250
MRSS     610     3     SAPK-61003INMRSS     Multi Resource Service Scheduling
ST-A/PI     01L_ECC600     0          -     Application Servicetools for ECC 600
TDAGBCA     110_600     2     SAPK-26002INTDAGBCA     TechniData Basic Components
VIRSAHR     530_700     3     SAPK-53303INVIRSAHR     SAP GRC Access Controls 5.3 for 700 HR S
VIRSANH     530_700     4     SAPK-53304INVIRSANH     SAP GRC Access Controls 5.3 for 700 HR a
XFT     240_700     0          -     xft business add-on
Thanks
Mani

Siemens Meterial for SAP-XI

Hi,
Could you please provide me Siemens meterial for SAP-XI
Thanks,
RamuV

hi ramu
why you are specifically asking for SIEMENS material,as a lot of information is available in sdn blogs...iam sending you the links pls go thru it ...its a complete xi stuff
SAP XI supports internal company scenarios and cross-company scenarios.
XI has following components:
1) Design and Configuration time components http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
2) Mappings
3) Adapters
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
4) CCBPM
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
5) Central monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Refer all the below links for starter:
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
/thread/143337 [original link is broken]
XI for starters
Help in XI
Hi all, I am learning xi, any body have lifecycle document of xi projec
Regarding XI installation and Learning
1. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I
2. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II
3. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
and once you are through ...follow the following links to weblogs which explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic scenarios.
Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
ABAP Proxies in XI(Client Proxy) - ABAP Proxy to File
FILE to JDBC Adapter using SAP XI 3.0 - File to JDBC
File to R/3 via ABAP Proxy - File to ABAP Proxy
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) - File to File Part 1
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) - File to File Part 2
Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
RFC Scenario using BPM --Starter Kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] - File to Mail
Dynamic File Name using XI 3.0 SP12 Part - I - Dynamic File Name Part 1
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - Dynamic File Name Part 2
The specified item was not found. - Dynamic Mail Address
Understanding message flow in XI - Message Flow in XI
Walkthrough with BPM - Walk through BPM
Schedule Your BPM - Schedule BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] - Use of Synch - Asynch bridge in ccBPM
The specified item was not found. - Maintain RFC destination centrally
Triggering e-Mails to Shared folders of SAP IS-U - Triggering Email from folder
Outbound Idoc's - Work around using "Party"? - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI The specified item was not found. - Testing of integration process
The specified item was not found. - Authorization in XI http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
The specified item was not found. - Alert Configuration
The specified item was not found. - Trouble shoot alert config
Executing Unix shell script using Operating System Command in XI - Call UNIX Shell Script
Overview of Transition from Dev to QA in XI - Transport in XI
Using ABAP XSLT Extensions for XI Mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
XI : Controlling access to Sensitive Interfaces - Controlling access to Sensitive Interfaces
The specified item was not found. - The same filename from a sender to a receiver file adapter - SP14
Payload Based Message Search in XI30 using Trex Engine - Payload Based Message Search in XI30 using Trex Engine XI : Configuring CCMS Monitoring for XI- Part I - XI : Configuring CCMS Monitoring for XI- Part I
The specified item was not found. - XI: HTML e-mails from the receiver mail adapter
XI : FAQ's Provided by SAP (Updated) - XI : FAQ's Provided by SAP thnx chirag
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Which Business Functions should be activated for China? (We have EHP6)

Hi Gurus,
We are in the process of planning SAP Rollout SD/FI/CO to China.
Which Business Functions are typical to be activated for using SAP in China?
(We have SAP ERP with EHP6)
Thanks+Regards
Dieter

Hi Mark,
Looking inside transation SFW5 (inside Enterprise Business Functions folder), my target FSCM components about FSCM are these in yellow:
Now, I see FIN_FSCM_CCD_INTEGRATION_3 has a dependency with FIN_FSCM_CCD_INTEGRATION. That means, just as you say, that I have to switch it on before number 3.
However, I need to raise these two questions:
1. There is no FIN_FSCM_CCD_3 at all inside SWF5, just INTEGRATION, is this important or not?
2. Do I have to switch on FIN_FSCM_INTEGRATION (before FIN_FSCM_CCD_INTEGRATION and FIN_FSCM_CCD_INTEGRATION_3).
I know it is a matter of Basic work, however I need to tell them which component to activate in order to have the latest functionality. And to be honest, I am not sure, mainly because I cannot find the FIN_FSCM_CCD nor FIN_FSCM_CCD_3 component in this installation, only ***INTEGRATION*** components. This is tricky.
Please, be as accurate as you can in your respond.
Thank you so much.
Wilson.

CCMS Activation for SAP XI

Similar Messages

Maybe you are looking for