CCMS Alerts in PI 7.1 for adapter engine

Hi Experts,
Looking for a step by step process to configure CCMS alerts for adapter engine in PI 7.1

Hi Shweta,
>>>Looking for a step by step process to configure CCMS alerts.
Please see the belog blogs, it might be helpful to you.
Part u2013 1:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Part - 2:
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Part - 3:
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Mar 22, 2011 12:58 PM

Similar Messages

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Error in gettnig logon data for Adapter Engine

Hi,
We have Http > XI > RFC Scenario. We are getting 401 unauthorized error in "CALL ADAPTER" section. From the trace its clear that the logon data for the adapter engine (there is no value for USER in trace) is not getting poulated. We fixed this issue last evening....i think by doing full cache refresh, but this problem propped up again today. Yesterday when this issue was fixed the USER has "PIISUSER" in the trace.
We haven't changed any config settings since yesterday so all the passwords and other config info is same. Not sure what's causing this issue. Below is the trace. Any help will be highly appreciated.
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.ppi.dac-sapd1</Trace>
<Trace level="3" type="T">URL = http://dac-sapd1.actv2.com:8007/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User =</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> 401 &nbsp Unauthorized</td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23">SAP J2EE Engine/7.00 </td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> Authentication did not succeed.</td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"> Details:</td> <td align="left" valign="top" height="48"><pre> No details available</pre></td> </tr> </body> </html></Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 401</Trace>

Hi,
go to the exchange profile.
there u need to maintain the password for the XIISUSER.
I think u need to restart the J2EE Engine for the changes to take effect.
Regards
Cornelius

Reg Unable to find URL for Adapter Engine Error

Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.

Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay

No_messaging_url_found: Unable to find URL for Adapter Engine

Hi,
I am facing the same problem. I have configured a RFC-File scenario.
I get the error"no_messaging_url_found: Unable to find URL for Adapter Engine af.<SID>.<server>"
and <INTERNAL.AE_DETAILS_GET_ERROR>
I get the error "no_messaging_url_found: Unable to find URL for Adapter Engine" when I execute the Function Module SAI_AE_DETAILS_GET.
This error occured in the line 235( sap_xi_adapter_services = sld_accessor->associators( iref = sap_xi_adapter_framework assocclass = 'SAP_HostedXIAdapterServi) of the FM.
The value is not filled and i get the error mentioned.
I have gone through thread and verified all the points mentioned.
I have checked SXI_CAHCE,there are no locked users in RSUSR200,
SXI_CACHE, Goto->AdapterEngine Cache, I have an entry af.<sid>.<server>
In SLD,Technical Landscape,Exchange Infrastructure I have the entry <SID>.<Server> against the Adapter Engine
But as was mentioned in the thread the line 241 of the Fucntion Module has 'adapterType' and not 'Adaptertype' as in the exchange profile.I did not try changing 'a' to 'A'.
Could you please let me know how to solve the problem.
Thanks in advance.

Hi Vani,
Check the pipeline URL in the SLD
Business System->URL
It should be
http://host:HTTPport/sap/xi/engine?type=entry
Just check this thread- may be useful-
File Adapter - Sender Problem
RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy

Unable to find URL for Adapter Engine af.xid.xidev ?

Hi,
I have scenario.
Abap proxy -
> ccBPM -
> RFC (synchronous).
The error happen for ccBPM -
> RFC
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.xid.xidev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any idea for what happening ?
Cheers
Fernand

Hi.
Have you tried with this
Re: Wrong Adapter Engine on RWB?
Regards
Seshagiri

Unable to find URL for Adapter Engine

Hi,
We have installed the XI 7.0 and I have realized a simple scenario "File > XI > File" in order to validate the installation... and on has a dump around Adapter Framework.
Inside SXMB_MONI, on has the following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xid.bcnssap006</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xid.bcnssap006</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.xid.bcnssap006</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It's probably a problem with aii but which one ?

Hi Mickael,
The problem that you are facing looks like it is unable to connect to the adapter engine itself, please check the following:-
The userid being used must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
*During the configuration of the adapter (From Help documentation):-
Specifications for the Integration Engine
Enter the complete address (URL) of the Integration Engine that you want to send the message to:
XI.TargetURL=http://IntegrationEngineHost:port/pipeline-arguments
This specification is mandatory.
One suggestion:- Please try the following and see if you are still facing the problem, this might help you in decreasing the number of places to verifyconfigurations!
Again, from help:-
The Integration Engine address can also be accessed dynamically from the SAP System Landscape Directory (SLD). The following entry is added to the configuration for this purpose:
XI.SLDConfiguration=SLDaccessor
In this case the URL of the corresponding Integration Server for the system specified with XI.SenderService is read from the SLD and used instead of the value specified under XI.TargetURL. Therefore, specify the following:
XI.TargetURL=<fromSLD>
To be able to access the SLD, the SLDaccessor service must be configured correspondingly and the respective entries must be maintained in the SLD.
Hope this helps!
-Sushumna

Error : Unable to find URL for Adapter Engine

Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
 <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xd2.host-dev</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
sai

Hi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception NO_ADAPTER_ENGINE_FOUND
Message ID: SAI_GLOBAL Message number: 016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

Alert for adapter engine error

Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachi

Moha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish

Abap tables for adapter engine errors

Hello,
Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
Any help is very much appreciated.
Thanks
MLS

Hello,
What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
Any ideas on how to accomplish this?
Thanks
MLS

Cache Refresh for Adapter Engine is not working

Hi,
our adaper engine is not working. At RTW no there are no channels visible and the button "Test Cache Connectivity" leads to a yellow icon for the adapter engine with the error text: "Attempt to fetch cache data from Integration Directory not yet started or still in process".
The error reason is at http://<j2ee host>:<port>/CPACache/history.jsp available: com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Couldn't open Directory URL (http://pixd1.digoff.no:55200/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=C&consumer=af.xd1.dat-dof-xi), due to: HTTP 403: Forbidden
The cache refreh request from adapter engine to directory gets an 403 error. What is strange: No problem, to execute that request in a browser, i get the right message, no fault.
I searched for notes or other threads, i could find only <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373531383536%7d">SAP note 751856</a> , but it is valid for XI 3.0; we are on PI 7.0.
I checked out:
- no user blocked
- all system users have standard authorisations
- reimport of SAP BASIS SWC
- SICF services for XI active
- destination INTEGRATION_DIRECTORY_HMI working
Any idea, how i can get the adapter engine working?
Regards,
Udo

Hi,
There are two ways to display the content of the CPA cache refresh.
1. The Cache-Update Content-XML
Document can be stored in the Adapter Framework database (J2EE schema) for further analysis. Here you have to set the property in the J2EE Visual Administrator tool.
To do so, proceed as follows:
=>J2EE-service SAP XI AF CPA Cache
=> set property trackCacheUpdateXML= true
=> You can now display the cache update XML with the alias CPACache
=> View Cache Update History
=> View Cache Update XML
2. The content of the cache refresh from the Integration Directory intothe CPA cache can be written to an XML file: Here you have to set the property inthe J2EE Visual Administrator tool:
=>J2EE-service SAP XI AF CPA Cache
=> set property J2EE service SAP XI AF CPA Cache cacheUpdateDebugFile = true
=> the CPA cache refresh XML file will be in the server(0) directory search for the following file names:
=> value of the property cacheUpdateDebugFile.deltaif you intend to see the delta refresh accordingly and the value of the property cacheUpdateDebugFile.full if
you intend to see the full cache refresh content
Note: After your analysis, do not forget to reset the properties value to false.
You can delete the XML cache-
refresh table: alias CPACache
=> View Cache Update History
=> Delete History
Also check out the user and its permission.
regards
Aashish Sinha
PS : Reward points if Helpful

Versin iformation for adapter engine is missing in the SLD

Hi,
Just imported my Integration Directory changes into receiving PI System and have come to do the manual activation of the change lists that was asked for. When I do I get the activation cancelling with a message that a communication channel cannot be validated as the version info for the adapter engine is missing in the SLD.
Can anyone tell me what I have to do to get past this problem ?
Many thanks,
Ross

Hello Ross,
It looks compatability problem with the Adapter engine and CC.
Check the system information and apply required patches if require. May be you can go to SAP raising a message.
http://<pihostname>:<port> systeminfo
Regards
Pothana

List of actively addressed adapters for Adapter Engine

There are two different types of adapter for sending data from a sender application
system to the Integration Server:
Adapters that can be actively addressed, for example the ABAP proxy adapter, the plain HTTP adapter, the IDoc adapter
Polling adapters, for example the file/FTP adapter and the mail adapter
Can anyone specify which adapters can be actively addressed? I'm using XI scaling and need to know which adapters I have to point to the adapter engine, versus polling adapters.

Hi George !
It sounds ok.
Here are some links that might be useful:
JDBC Adapter - Connection Pooling
Connection Pooling in JDBC Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e10b4b78-0801-0010-aaba-fb0a5f9c74fc
JDBC Connection pools and clusters (is max connection for entire cluster?)
http://help.sap.com/saphelp_nw04s/helpdata/en/56/1e5d427213d142e10000000a1550b0/frameset.htm
DAtasource and JDBC connection pool configurations
Regards,
Matias.

CCMS Alerts in PI 7.1 for adapter engine

Similar Messages

Maybe you are looking for