CCMS monitoring alerts

Hi Experts,
I need to install and configure CCMS Monitoring alerts.I don't have idea about CCMS, please help me for this and give me any links or docs.
In my Landscape we have 4 SAP systems.
1. SAP CRM7.0 EHP2
2.SAP ECC6 EHP5
3.NET WEAVER 7.3 EHP1
4.SAP SRM7.0 EHP2
Thanks
Jana

Hi Jana,
Please see link:
http://help.sap.com/saphelp_crm700_ehp03/helpdata/en/49/2d927507361903e10000000a42189c/frameset.htm
Normaly CCMS alrts are set as default. If it is not activated please see as well note 1827820 which might have been applied in your system.
Best regards - Christophe

Similar Messages

Configuring HP-Openview to monitor alerts of CCMS in SAP system via SOLMAN

Hi All,
I need to configure CCMS in SOLMAN and then monitor the same alerts via HP-Openview because thats what is used in my company to monitor alerts.I have a few queries regarding the same:
1. Is it possible to configure CCMS in SOLMAN and then monitor the same alerts via HP-Openview.
2. How actually does HP-Openview work regarding picking up monitoring data from CCMS in SAP.
3. Does it work like CCMS would be generating logs of the alerts and stored some where and we could congigure HP-OV to look for a keyword in the logfile by giving HP-OV the path of that logfile and as soon as it comes across that keyword it would generate an alert.
4. Do we need any addon to be downloaded ( also want to know whether its free or cost is involved) and configured in SAP under CCMS that would help Hp-OV to detect alerts.
Regards,
Ashish Robinson
SAP BASIS TEAM

i think so.. i have seen somewhere..
I will get back to you on this.

CCMS agents, alert monitoring, SNMP traps

Hi Guys,
I have a question. There is a requirement about monitoring. Any documenation or links will be really appreciated.
My client needs me to use CCMS agents, alert monitoring for both ABAP and JAVA stacks, SNMP traps, sending SNMP traps, interface CCMS with third party monitoring tools. Mostly, the ,monitoring is done thru RZ20.
Anybody can point me in right direction or material.
Thanks
Venky

Hi,
Check these CCMS Weblogs. Really good ones...
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Feel free to revert back.
--Ragu

Handling error in XI with CCMS and Alert Monitor

Hello,
I have configured the CCMS for handling XI error and use the auto-reaction method CCMS_Send_Alert_to_ALM for sending an alert when i have for exemple a mapping error.
The issues are :
1) When an alert is catched I can send an email or having a notification in the alertinbox but not the both.
2) When an alert is catched in the CCMS, this alert is in an active status and i can't receive a second alert if another error occurs in XI until i have completed manually the first alert. Is it possible to complet this alert automatically or having more than one alert active for the same node in the CCMS ?
Regards,
Vincent.

Gopesh
The alerts are displayed to the recipient in one of the following programs:
.In the Universal Work List (UWL of the Enterprise Portal) as of SAP NetWeaver 04
· In an application that accesses the alerts using an API
· In the Alert Inbox. The Alert Inbox is an application based on Business Server Pages (BSP),which can be called using the transaction ALRTINBOX or the corresponding URL
(http:///sap/bc/bsp/sap/alertinbox).
There are also a number of external communication methods available. You can configure these in SAPconnect (transaction SCOT) and use them in addition to inform the recipient of an alert about the problem: Internet mail, SMS, and fax.
Just to cross check have you configured your alerts using the below urls:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/aeeda66b-0a01-0010-6884-876fac1c4a2d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/be79a16b-0a01-0010-51b8-9b6d1968338d
Regards,
---Satish

Monitoring/Alerting Set up options in SM - System Monitoring

Comrades
When configuring Solution monitoring in SM 4.0 for our lanscape the customised CCMS monitor set (created in RZ20 of Target Sysem) needs to be imported during set-up system monitoring process
1.Is it possible to import the customised CCMS context in solution monitoring during set up?
2.In the current system monitoring configuration certain DB related monitors are not visible (displayed) though they are configured properly is something to be done ?
Also looking on the following alerting options E-mail,SMS and SNMP Traps from the SM 4.0.My understanding is E-mail and SMS are based on Central autoreaction methods on the Alert Monitor.
3.Is it possible to configure E-mail and SMS without CCMS Agents on Target Systems ? and Is there a way of configuring E-mail and SMS other than Central Auto Reaction Methods ?
4.Are there any prerequistes (Agents, Software, packages ) for configuring SNMP Traps from SM ?
I have done some reading and searching on these points and pretty unclear on these aspects.Kindly share your knowledge on this area.
Kindly Respond
Many a Thanks
Gnana

I managed to set up an account manually on the C7 but I had to trick the email application by entering an invalid email address and password. After it could not find my account it then opened up all the settings and permitted me to add the manual IMAP settings, reply to address and other details. After I committed the settings, the phone recognised the account as a gmail account and it locked down all the settings again so I could not go back and change them if wrong.
I was quite chuffed with myself for seemingly resolving all my issues.....but on using the new account settings I could not sync the gmail sent / bin folders. All the other folders synchronised fine and when I send email it has the correct reply to address. Strangely this matches the best results I obtained when connecting using the Mail for Exchange settings so am no further forward. I am a little confused by this as when I let the phone set up the Gmail account on it's own it can sync everything.....but I just can't
I am now hoping that the new software update (PR1.2) gets email working a little better....well when I eventually get it hehe.

Error in CCMS monitoring Batch job SAP_CCMS_MONI_BATCH_DP.

Hi All,
I am using a Sanbox system for CCMS Monitoring activities. I assigned a method CCMS_ONAlert_Email under auto reaction to the MTE class ABAP shortdumps on node System errors. So the requirement is when an alert triggered i have to receive an alert email. I just found there is an error in Batch job created for Alert monitoring, please find the error details mentioned below. Please let me know how to solve this error
Job started
Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID NBKIPXP)
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075617',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1')
: ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTIONin class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/log_dir/NO
: DE0000/') ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
: b2es1/NODE0000/ES1/T0000003/C0000000.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000003/C0000001.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000003/C0000002.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000003/C0000003.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000004/C0000003.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
b2es1/NODE0000/ES1/T0000004/C0000000.UTM') ) ASFS_CONFIG
Database:
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
/exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
on code: "4". SQLSTATE=42724
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
xception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000004/C0000001.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000004/C0000002.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Job finished

Hi Dinesh,
Please check the note is applicable for you [Note 978319 - DB6: Incorrectly cataloged table functions|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=978319]
so please check wheter db2<sid>user has enough permission
Thanks,
Jansi

Regd: CCMS and Alert ?

Hi @,
I have some doubts regd CCMS and Alert :
1.Whether CCMS config is mandatory to use alerts ?I havefound in some places tht it is not required then where will be alert available if i trigger
2.Steps to configure CCMS to include XI as it is not configured in my system?
REgards

1.Whether CCMS config is mandatory to use alerts ?I havefound in some places tht it is not required then where will be alert available if i trigger: AlertInbox
2.Steps to configure CCMS to include XI as it is not configured in my system?
Follow these guidelines:
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

Fwding Alert in CCMS to Alert Management???

Hi,
I'm trying to fwd the alerts coming in CCMS to Alert Management System. Both are in the same machine.I follwed the steps given in the SAp help.But i did not get the result. I was not able to do one step which tells us to
"Specify RFC Destination in SALRT1 in Client 0 of CEN...."
When i try to specify it comes as not modifiable in client 000.
Please do help me out in solving it...
waiting eagerly 4 a soln,
Sundararamaprasad.

Hi Sushumna,
I'm specifically talking about CCMS alert management for XI.
The link where i came across
"Specify RFC Destination in SALRT1 in Client 0 of CEN...."
is http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/frameset.htm
it is "Forwarding Alerts to Alert Management (ALM)" document.
In that under the heading "Setting Up a Destination Between the Central Monitoring System and the Alert Management Framework" third point.
I think this will be of some use to help me out.
waiting eagerly for a solution,
Sundararamaprasad.

CCMS MAIL ALERT FOR STANDBY DATABASE

Hi All,
I've configured the CCMS alert monitor in my entire landscape & I'm successfully getting alert mails from CCMS alert monitor (T-codes involved are RZ20 & RZ21).
I want to activate the same functionality for my standby database. At least I want to configure the CCMS alert monitor for File System Utilization in my Standby database.
Can any one guide me about the configuration setting for file system utilization in Standby Database through CCMS monitor.
Regards,
Neehir Bhatt

Hi,
Highlevel steps:
- Install the sapccm4x agent on the standby host
- Register the agent to the CEN
- In the agent home directory create a file like oscolfilter.ini In this file enter the filesystems you would like to monitor
- Add the oscolfilter.ini file into the sapccmsr.ini file This is also located in the agent home directory
- Create a MTE for filesystem monitoring in your CEN. Add the relevant monitor attribute there.
- Assign autoreaction via RZ21
For more information, see OSS Note 522453 - RZ20: Monitoring operating system data

CCMS Monitoring Sets in SAP Netweaver ABAP 7.01 Trial

Hi community,
I have successfully installed the trial in the subject but I can't see the alerts in transaction rz20 under CCMS Monitoring Templates. If I click on a node the message "No alerts data exists" appears in the status bar
I am not an expert of these functionalities, but I suspect that they have been disabled in this trial edition. Am I right, or I have to do some post actions to activate it?
Thanks, Valerio

Hi,
this is true, but these are disabled (in gray color) and the alert tree is empty, because these graphical icons reflect the status of monitoring alerts.
I found that parameter alert/MONI_SEGM_SIZE was set to 0 in the instance profile
By setting it to 40000000 (minimun value) now I can see the alerts in SAP MMC and the tree of alerts is full.
Unfortunately if I go in transaction RZ20 i see nothing as before...
Regars,
Valerio

CCMS monitor, BPE is red

In CCMS monitoring RZ20, the node XI_system Business Process Engine -> Overall status -> Status of the automatic customizing is red. The text is BPE customizing not fully maintained.
When clicking this text, an information page is shown, and you can go directly to Automatic Workflow Customizing to Perform Automatic Workflow Customizing. Here, all the steps are green! A few days ago I had to manually execute the job scheduling for Packaging and Reorganization. They where grey before I did this. But now, they are all green.
So why is the status red in the CCMS monitoring?
BTW: The nodes Runtime -> Process scheduling -> Status of automatic clean up and Status of container definition buffer are also red!
Anyone with a suggestion of what the problem could be?
Edited by: Rune Johansen on Aug 19, 2008 2:39 PM
Edited by: Rune Johansen on Aug 19, 2008 2:41 PM

Hey Rune, how are you dude... long time no hear.. how are those shoelaces.
Let me just get your issue straight... your issue is in the CCMS monitor itself?
Becuase two things here:
1: I am sure there are two views... as in one with current alerts and one with previous alerts. (Open Alerts and Current Status). Check which one you are in...
2: When an error is solved I think you have to update it manually...
I am just taking a stab at this since it is a while since I last worked with CCMS...
Could any of these be your issue?
Edited by: Alex on Aug 19, 2008 4:05 PM

CCMS monitoring for SAPconnect based on Error Message Numbers

Hi,
We are trying to use the CCMS monitoring to produce alerts for SAPconnect based specific Error Message Numbers for emails for example, however the monitoring function or data collection method for SAPconnect (BCOMAL_SXDS) does not provide that level of granularity. Has anybody faced this same problem and can provide a recommendation for this?
Thanks,
Javier

Hello,
You can see the message details in SE91.
In FI, you can control the message number in OBA5. Normally message numbers are issued like this
AA165
First two digits (alpha) is called application area next digits are called message number.
Sometimes, you may not be able to see the messages in OBA5, in such case you need to go to OBMSG transaction code and include the message number to your application area, then you need to come to back to OBA5 to make it information / warning / switch off / error (as the case may be)
Regards,
Ravi

CCMS Monitor to Pager for Failed Background Jobs

Hello Experts,
I am currently leveraging Central CCMS monitoring to alert us via email whenever a background job fails in production using the MTE Class R3BPServerSpecAbortedJobs.
I am trying to find a way that I can tweak the monitor to alert me ONLY when specific background jobs fail.
We want this alert to notify the oncall pager only when a handful of critical jobs fail. Does anyone know how I can delimit this MTE?
For example, we will be creating jobs that begin with Z_ALERT* that I will tie to an auto-react method that will email a pager.
Thanks in advance.
Bill

Hi Sundara.
From following link, you can download step by step setup information.
So please check following documents.
http://www.service.sap.com/bpm
=>Media Library=>Technical Information
=>1. Business Process Monitoring - Setup Roadmap
=>2. Setup Guide - Business Process Monitoring
Before you start setup, I recommend you to check
SAP Notes 521820 to ensure whether you already fulfill
prerequestions.
Basically what you have to do is following.
1. Describe your business process under following area.
   (T-CD DSWP =>Solution Landscape =>Solution landscape maintenance)
2. Setup BPMon session.
   (T-CD DSWP =>Operation Setup => Solution Monitoring =>
    Business Process Monitoring)
   in BPMon session, select job monitoring. And define background
   job that you want to monitor.
   In BPMon job monitoring, you can monitor, cancel, delay, duration,
   unexpected parallelization, also job log and so on.
I hope this information help you.
Best Regards
Keiji Mishima

CCMS monitoring alerts

Similar Messages

Maybe you are looking for