CCMSPING Destination in Solution Manager /.1

How do a install ccmsping agent in solution manager 7.1
I´m creating a new system Solman and need to have ccmsping working as it it is in my older system.
I have exported the custom templates from my old system and created the connection to the system´s to be monitor´d.
Now I need to enable ccmsping destination .

Hi Vioar,
Please check if latest available CCMSPING agent as per note 1453112?
1175058 - Problems with CCMSPING in SAP Solution Manager
1453112 - CCMS agent and kernel patches
1820452 - ON-SYS: no ccmsping data available in detail
For a CCMS agent registration you always will need 2 users, namely one ADMINISTRATOR user for doing the registration and one user who will be used by the agent to communictation with the central system and this user is by default the CSMREG user who does have a very restricted authorization profile.
Please use for example your own user (with administrator'sright ) for the registartion of the agent, this user is only used once in the registration procedure and for this user should have SAP_ALL authorization granted.
I hope above info would help you to continue with the agent registration process.
Also check:
http://help.sap.com/saphelp_nw70/helpdata/en/38/9e3337d7840ffee10000009b3810a5/content.htm
Thanks
Vikram

Similar Messages

Solution Manager 4.0 - Service Desk

When I try to create a support message in the system under help or by double clicking the SAP logo, I get the message "Customizing for feedback functionality missing".
I am testing to see how to create messages and resolve them in Service Desk because I will be using Service Desk for supporting issues, and raising to SAP.
I am unable to create a SAP support messages, so can somebody please help me to resolve this issue.
thank you
Bilaal

hi
Check the RFC destination in you r setallite system ...
SM30 and enter BCOS_CUST in table/view click on maintain ... here you should have RFC destination defined ... LIKE
Appl + Dest + +
OSS_MSG W SM_SS1CLNT120_BACK CUST620 1.0
Where SM_SS1CLNT120_BACK is your RFC destination to Solution manager system.....
Regards
Farooq

Error message in "Check Solution Manager"

I'm running SolMan EHP1 SP6. The BI repository and Solution Manager are running on the same box. The BI repository is loaded in client 001. The System SID is PS4.
I'm performing the "Diagnostic Self Check" in Root Cause Analysis. When I select the "Check Solution Manager" button I'm getting an error message
Text = BI Setup check 'MYSELF_DEST' failed - Reason: ;Incorrect client 300; use BI client 001
Action = The CCMSBISETUP job was not completed successfully. Please run CCMSBISETUP again from the transaction solman_admin and/or adjust the corresponding BI objects in RSA1 if necessary.
In RSA1 the source system is defined as PS4CLNT001. So I'm not sure what the problem is.
It is my understanding that I can configure CCMSBISETUP in solman_workcenter by selecting "System Monitoring", then Setup, then Configure IT Performance Reporting. When I do this the default value for RFC destination from Solution Manager to BI: is set to NONE
The system requires and entry for the RFC destination from BI to Solution Manager - Does anybody know what RFC destination belongs here?

Hi,
The CCMSBISETUP job was not completed successfully. Please run
CCMSBISETUP again from the transaction solman_admin and/or adjust the
corresponding BI objects in RSA1 if necessary.
Alternatively, please perform again Initial and Basic configuration
for SolMan by running transaction solman_setup. This should solve the
issue.
Notice that you must have the latest version (13) of SAP Note 1405878
applied in the solution manager system.
Hope this helps.
Cheers
SH

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

Ccmsping registration problem in Solution manager

hi,
I am installing CCMSPING agent to check "System Availability" from Solution Manager.
In our system ladscape we have multiple systems on sigle host. for eg) TP7 & DW1 on single host cpafisb8.
I have successfully registered the CCMSPING agent in Solman.
I have followed the Availability doc for registeration CCMSPING. Following are the major steps that i have done:
1)Download & extract CCMSAGENT from market place.
2)Configuration of Central Monitoring system.
3)Registration of CCMSPING using command u201Cccmsping -push -Ru201D.
4)Configured Availability Monitoring in Central System (i.e. Solution Manager) in RZ21.
As result i can see the stellite sytem node in RZ20 under " SAP CCMS Monitor Templates-->Availability and Performance Overview".
When i go to transaction "solman_workcenter" in tab "System Landscape management", i can see the staus of system as Green for the system i registered.
Now, the problem i facing in in transaction solman_workcenter is described as follows:
As i mentioned We have multiple systems on single host, for eg) TP7 & DW1 are on the same host "cpafisb8",
hence if CCMSPING has been registered for TP7 the status is green for DW1 too even if DW1 has no entry in RZ21.
Strange thing is DW1 was showing.
I have tried following three options to make the status correct in solman_workcenter:
1) I have maintained hostname for TP7 as "TP7.afis.chevrontexaco.net" which is alias for
hostname cpafisb8 in RZ21 & SMSY & status is correctly showing green for TP7 but still for DW1 which is not defined in RZ21, status is showing green.
2)I have unregistered the CCMSPING fron TP7. TP7 status has been changed to gray but strange thing happeneing was DW1 status was still green even no ccmsping process was running on the DW1 host.
3)I have registered the CCMSPING for TP7 with its central instance profile options using command:
ccmsping -R -push -n31 pf=/usr/chevron/TP7/profile/TP7_DVEBMGS31_cpafisb8
and agin configured TP7 in solution manager & status changed gray to green for TP7, but no change happening in DW1 status.
Can anyone please help on this strange behavior of Solman_workcenter.

Hi,
Thanks for he reply..
But i have already followed the process that you described or CCMSPING registration. and CCMSPING is transfering the data successully from satellite system to solution manger.
And as result of successul registration i can see the status of that satellite system as green in transaction "solman_workcenter".
But as i described earlier we have multiple systems registered on single host.for eg)SY1 & SY2 on host1
Hence even though the CCMSPING is not registred for SY2 & only registered or SY1 on host1 with RZ21 configuration in solution manager for SY1; SY2 status is also shown green in transaction solman_workcenter.
I want that only status of SY1 should be shown as green in solution manger under transaction "solman_workcenter".
I hope you understood the issue.
thanks

No active master Solution Manager destination maintained. [Maintenance Pack

Hi,
I want to activate Automatic Maintenance Certificate Renewal via solution manager system as per SNOTE: 1280660.
SOL MAN: ST400 SP 18
SCM : ST-PI 2008_1_700 SP 01
when i run Maintenance package in my managed (satellite) system i got the log as below.
Updating license data not possible Maintenance Package
No active master Solution Manager destination maintained. Maintenance Package
Updating license data completed from destination Maintenance Package
Maintenance Package completed
when i run Maintenance package in my Solution Manager system i got the log as below.
Refresh sessions from destination SM_KSMCLNT000_BACK started Maintenance Package
error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT000_BACK
Logon not possible (error in license check)
Sessions cannot be refreshed from destination SM_KSMCLNT000_BACK ( KSM , 0020472195 )
Refresh sessions from destination SM_KSMCLNT000_BACK finished Maintenance Package
Refresh sessions from destination SM_KSMCLNT001_BACK started Maintenance Package
error reading function module interface DSWP_API_SESSIONLIST_GET from SM_KSMCLNT001_BACK
Logon not possible (error in license check)
Sessions cannot be refreshed from destination SM_KSMCLNT001_BACK ( KSM , 0020472195 )
Please anyone facing the same or related issue, give me a suggestion..
Thanks,
Manikandan B

HI Paul,
Thanks for ur suggestion. I have resolved this issue. now certificates are automatically updated.
But i got the error from maintenance task... for all system.
"RFC error when trying to report license key status back to Solution Manager System SM_KSMCLNT200_"
on report name "/SDF/SAPLLICENSE_KEY_UPDATE"
Kindly advise me..
Thanks,
Manikandan B

Auto Alerts in Solution Manager!

I am tryting to configure Auto Alerts in Solution Manager 7.0 EHP1. I have configured the system landscape and created the RFC connections to satellite systems.
I want to configure system monitoring in SolMan for Satellite systems with Auto Alerts.
I first configured the system monitoring in SolMan and assigned the processes to be monitored. Then I tried to configure Auto Alerts as following..
1) created the ARM ( Auto Reaction Method in Tx-RZ21) copying the existing one. ex: ccms_onalert_email
2) Assigned the Auto Reaction Method to the MTEs that I want to monitor in satellite system ( in Tx-RZ20)
3) Created the distribution list ( Tx-SO01)
4) Tried to send the message manually from Tx - SO01 and successful
5) I changed the threshold values to check if I get any autoalerts but Failed...:-(
I searched alot for the sap notes but finally confused.....
Please let me know if I am missing anything here...Or gimme your working exprience in steps..
Thanks,
Shai.

Srikishan,
Your article is a very helpful one. I did my configuration as it is in your article. But I do not get any auto alerts email notifications.
When I test the CCMS ping In RZ21. I get the below results.
CCMSPING: Test Results
Available Systems - CCMSPING call successful
Failed CCMSPING Calls
SID      CCMS_SYSTEM_PING_DEST
Agents that are reporting errors
CCMS_SYSTEM_PING_DEST
And in RZ20 I get the below results:
   Node display off
   Availability and Performance Overview
          Availability
              RFC-Destinations
              DDS
                  Availability: DDS
                      Availability                    0 %
                      CCMSPING/Configuration Error    Communication error when attempting to call CCMSPING; see CCMS_SelfMonitoring
For the Connection Data in monitoting and availability systems I did as following: ( ABAP Message server)
System     :          DDS
Description :         Sandbox System
Message Server Host Name : bjrtssap1.ca.shainet.com
IP Service Name            ms.sapDDS_DVEBMGS20
Router String
Please let me know if I am missing any configuration here.
Thanks,
Shai

HOw to schedule ''landscape fetch' job in Solution Manager???

HI,
Can any one please help me in scheduling LAndscape fetch job in solution Manager?
rEgards,
fAisal

Hi Venkatesh,
Thanks for your reply.
I checked by executing SLDCHECK. It opened the SLD page successfully. However, before that in the ABAP screen, it gave me error saying that:
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
The RFC LCRSAPRFC was of type 3 ABAP. It asked me to change it to T (TCP/IP). I did so.
However, now I get this below error:
Properties of RFC destination LCRSAPRFC
RFC host:
program id:
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout dur
I even tested this RFC in SM59. It gave the same error.
CAn you please help me?
REgards,
Faisal

Error opening a Test Script inUFT from Solution Manager

This error is the subject of a call with SAP and HP but I wondered if anyone else has come across this problem.
We work with Solution Manager 7.1 (SP11) and HP's UFT 11.53 to create automated testing. We ustilise the two free seat licences for UFT that are provided via enterprise support. We do not use HP's Quality Centre.
On some occasions when trying to open a test script for editing UFT tries to open and then closes again. The error message below is displayed in solution manager.
“External Test Tool Quick Test Professional Is Busy and Cannot Create a New Test Script”
When this happens the local cache files are wiped. We have managed to salvage some of these scripts by pasting in copies of the cache file from another PC but some we had to recreate from scratch.

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

Error while trying to export data from Solution Manager 3.1

Hello, when trying to export a project via SOLAR_MIGRATION in Solution Manager 3.1, I get the following error when trying to release the transport:
COMMUNICATION_FAILURE for RFC call SCMS_CONT_EXPORT (destination SAPKPROTP): / RfcExecProg: SAP0451.
Error in calling KPro transport server
Has anyone experienced this or have an idea how to reslove it? I opened a message through OSS and received this feedback:
sapkprotp is not available for AS/400.
In your case, sapkprotp must be started on the SAP Content Server.
sapkprotp must then be started via a SAP Gateway connection.
Please change the RFC destination of SAPKPROTP so that
the program must be started on your SAP Gateway on the content server
computer.
We currently don't have a Content Server and I would like to be able to export this project without having to install a new application on a Windows server. I would appreciate any insight you may have into this. Thank you.
~TJ

If you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian

Service desk issue in Solution manager

Dear Friend's
I have configured Service desk in our Solution manager .
Solution manager version is 7.0 , on windows 2003 & oracle 10.2.0.2.0.
I am able create messages in our satilite systems . And sending to solution manager also.
Here issue is , when I click on send button in created message box , then our satilite system will asking password of basis user , which is present in solution manager. If I entered that password then It shows successfully send message with number.
I want's to skip the screen , where it's asking the basis user ,password.
So please give me solution , If you come across this problem.
Thanks in advance,
R.k sindol
Edited by: Raj kumar sindol on Jan 20, 2009 3:30 PM

Hello Raj,
see SAP Note [153743|https://service.sap.com/sap/support/notes/153743] chapter "In the R/3 system of the notifier (customer data entry systems).". Changing that RFC destination should be the solution for your case.
Best regards,
Andreas

Dump (Raise exception) in Solution Manager

Hi experts ,
We are getting dumps from Satellite system into the Solution manager system. And the user respossible for the dump
is ALERT_<SID of Satellite System>. All the RFC have been checked . Central Auto reaction methods are assigned from
Solution manager to Satellite system. And checked that Auto reaction methods are not responsible for dump
SOLMAN_CEN_ALERT Destination is also checked in Satellite system.
Please assist
DUMP Details :
A RAISE statement in the program "CL_ABAP_TYPEDESCR=============CP" raised the
|     exception
|    condition "TYPE_NOT_FOUND".
|    Since the exception was not intercepted by a superior
|    program, processing was terminated.
User and Transaction
|    Client.............. 100
|    User................ "ALERT_SID"
|    Language Key........ "E"
|    Transaction......... " "
|    Transactions ID..... "XXXXXXXXXXXXXXXXXXXXXXX"
|    Program............. "CL_ABAP_TYPEDESCR=============CP"
|    Screen.............. "SAPMSSY1 3004"
|    ScreenLine.........2
|    Information on caller of Remote Function Call (RFC):
|    System.............. "SID"
|    Database Release.... 700
|    Kernel Release...... 700
|    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
|    Call Type........... "synchron and transactional (emode 0, imode 0)"
|    Inbound TID.........." "
|    Inbound Queue Name..." "
|    Outbound TID........." "
|    Outbound Queue Name.." "
|    Client.............. 100
|    User................ "WF-BATCH"
|    Transaction......... " "
|    Call Program........."SAPLSALRT_CREATE_LOCAL"
|    Function Module..... "SALERT_CREATE"
|    Call Destination.... "SOLMAN_CEN_ALERT"
|    Source Server....... "Satellite System hostname"
|    Source IP Address... "XX.XX.XX.XX"
Source Code Extract
|Line |SourceCde
|   53|      read table admin_tab from admin_tab_line into admin_tab_line.
|   54|      if sy-subrc = 0.
|   55|        p_descr_ref ?= admin_tab_line-ref->get( ).
|   56|        if p_descr_ref is bound.
|   57|          return.
|   58|        endif.
|   59|        delete table admin_tab from admin_tab_line.
|   60|      endif.
|   61|*     create new descr object
|   62|      case admin_tab_line-kind.
|   63|        when kind_elem.
|   64|          raise event create_elemdescr
|   65|            exporting xtype = admin_tab_line-xtype.
|   66|        when kind_ref.
|   67|          raise event create_refdescr
|   68|            exporting xtype = admin_tab_line-xtype.
|   69|        when kind_struct.
|   70|          raise event create_structdescr
|   71|            exporting xtype = admin_tab_line-xtype.
|   72|        when kind_table.
|   73|          raise event create_tabledescr
|   74|            exporting xtype = admin_tab_line-xtype.
|   75|        when kind_class.
|   76|          raise event create_classdescr
|   77|            exporting xtype = admin_tab_line-xtype.
|   78|        when kind_intf.
|   79|          raise event create_intfdescr
|   80|            exporting xtype = admin_tab_line-xtype.
|   81|        when others.
|   82|*         all others are erros
|>>>>>|          raise type_not_found.
|   84|      endcase.
|   85| endcase.
86
|   87| create object admin_tab_line-ref exporting oref = returning_ref.
|   88| insert admin_tab_line into table admin_tab.
|   89| p_descr_ref = returning_ref.
|   90| clear returning_ref.
91
|   92|endmethod.
Kamal

Hi Kamal,
I recommend to open a ticket for SAP with the runtime error attached.
Best regards,
Andreas

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

Solution Manager System Monitoring of a CE 7.10

Hi
I am trying to setup a Solution Manager Monitoring Solution for a CE 7.10 Enviroment.
I have already setup CEN in SOLMAN.
I have registered CE Systems with a sapccmsr j2ee agent.
I have setup the JCO RFC Connection in CE.
I have created the TCP/IP Connection to the JCO Connection in Solman.
I have set the TCP/IP Connection in RZ21 as the J2EE Customizing Destination.
The solution involves only 1 Logical Component with 3 CE Systems.
When I go to the solution manager setup and try to configure the MTE Nodes for my solution I cannot get the MTE context while clicking in Activate Monitoring for other Software Components
I choose Java Application Server, choose my server, choose CEn but when i have to choose the context of the MTE i get an empty list.
IF i go Activate Monitoring for Other Servers and choose the server I get the contexts of the remote server, but I can only choose one.
So how can I see the context of the CE servers in the Software component part?
Ty.

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

Solution manager system monitoring configuration

Hi
I am configuring system monitoring in solution manager (Oracle / Solman 7.0 EHP1 / Windows 2008 / VM)
I have added a satellite system to solution manager thru CCMS and CCMSPING agents. These are visible in RZ21 / Technical infrastructure / Overview. This has also been added in SMSY, SMSY when refreshed pulls out data from the satellite system. However I am having trouble with the transaction SOLUTION_MANAGER. This is where I setup system monitoring.
Here I find the solution maanger system however am not able to find the satellite system which I had added.
Thoughts?
thanks
Ravi

Hi,
Have you defined and added corresponding logical systems for the respective satellite systems?
Here is the sequence of steps you've to do:
in SMSY:
1) Define server, DB, Systems
2) Generate READ, TMW, TRUSTED RFCs to the satellite systems
3) define logical systems and assign the satellite system to it
in Solution_Manager:
1) define new solution
2) add the logical system into the solution
If these steps are successful, you should be able to see the satellite system in SYSTEM MONITORING in Solution_Manager.
Have you already done these steps?
After performing these steps:
Solution_Manager>choose relevant solution>operations setup>Solution Monitoring>System monitoring>Activate monitoring> choose the system and activate monitoring.
Your system will then appear.
Does this help any way?

CCMSPING Destination in Solution Manager /.1

Similar Messages

Maybe you are looking for