CD size is now massive, help

I've been using itunes for a couple of months with no problems but I've just tried to import another cd (I've done about 60 in the last few days without problems)and itunes froze and wouldn't import the cd. I noticed that at the bottom of the screen is was showing the file size as 608MB for a one hour cd. i've tried adjusting all the import settings with no joy and I've even tried uninstalling itunes and reinstalling it. Can anybody help with this???? Oh yeah I've tried lots of different cd's as well and they're all doing exactly the same.

Hi Toonz
itunes hasn't been so bad for the last day or so but I've still got problems. I've manged to import some cd's and I'm a little embarrassed to say that I've realised the cd file size isn't any bigger when it's importing a cd ok. I'm still having problems with about 1 in 5 cd's causing the itunes to freeze and causesing problems with rebooting and shutting down. I managed to run a cd diagnostic after about 4 failed atempts and having to restart the computer before it would work. Here goes:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 3000
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82865G Graphics Controller\Intel(R) 82865G Graphics Controller
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________D108___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 13 songs on CD, playing time 41:59 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:19:10
Track 3, start time 06:27:71
Track 4, start time 11:11:65
Track 5, start time 12:00:71
Track 6, start time 17:16:24
Track 7, start time 21:03:29
Track 8, start time 24:35:66
Track 9, start time 28:02:62
Track 10, start time 30:11:37
Track 11, start time 31:14:37
Track 12, start time 34:53:20
Track 13, start time 37:32:37
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.

Similar Messages

  • Just updated version on itouch via itunes. Icons are now massive - can anyone advise how to revert to normal font size, just updated version on itouch via itunes. Icons are now massive - can anyone advise how to revert to normal font size

    Just updated to version 4.35 via itunes.   My icons are now massive making it almost impossible to do anything, even open up.  Can anyone advise me how I can revert to normal font/icon size.

    Try to double tap with three fingers on the screen to get back to normal size.
    Zoom in or out: Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
    page 204 iPod_touch_iOS4_User_Guide
    Message was edited by: Ingo2711

  • I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

    I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

    The way I resolved this issue was to create a dual boot Mac, so that I am able to boot from either Mountain Lion or Mavericks. Running Vectorworks in a virtual machine just didn’t cut it.
    I had already upgraded to Mavericks, which meant that trying to install OS 10.8.5 as a second operating system produced the error message saying it cannot be installed on this computer.
    First, if you need a copy of Mountain Lion installer and you has previously purchased it, open the App Store app, press the option key and then click on the purchases tab. You will see a list of all downloaded software from Apple and you can download OS 10.8.5 again without paying for it a second time. If you had previously created a boot disk of Mountain Lion, which I had not, you can obviously skip this step and the next.
    You will need a boot disk for Mountain Lion. After downloading the Mountain Lion installer, the easiest way to create a boot disk is to use a slick little app called DiskMaker X, which you can get here: http://liondiskmaker.com  Next you will need a USB flash drive of at least 8GB in size. Install and run DiskMaker X, plug in your flash drive, and follow the prompts. In just a few clicks, your boot drive will be easily created.
    Next, you will need to add a partition on your startup drive on which you will install Mountain Lion. Here is the procedure for creating the new partition: http://macs.about.com/od/applications/ss/diskutilitysize.htm  You can find this at Apple support, but this site gives you additional procedures that may be helpful. I set my new partition at 50 GB, but you can do with less is you don’t have the space.
    With those two operations done, and your OS 10.8.5 boot drive plugged in, restart you Mac and press the option key after you hear the chime. You will be asked which drive you wish to start from- select the boot drive. After your Mac boots up, you will see several options- choose install Mountain Lion (actually I think the option is reinstall Mountain Lion).
    After completing the OS install, install your copy of Vectorworks, copy and move whatever files you need to from Mavericks, and you are in business. To boot from either OS, simply press the option key and select OS 10.8.5 when you need to work in Vectorkorks, or OS 10.9 for all your other tasks. Switching back and forth isn’t as advantageous as otherwise, but it is the best way to run Vectorworks without upgrading for the $1,500 or so that would be required otherwise.

  • [svn] 4693: FxScrollBar min size is now 35 pixels.

    Revision: 4693
    Author: [email protected]
    Date: 2009-01-27 14:25:29 -0800 (Tue, 27 Jan 2009)
    Log Message:
    FxScrollBar min size is now 35 pixels. The thumb is hidden if there isn't enough room to show at its minimum size.
    QE Notes: The new min size for scroll thumbs may require new mustella bitmap baselines.
    Doc Notes: None
    Bugs: SDK-17126, SDK-18039
    Reviewer: Evtim
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17126
    http://bugs.adobe.com/jira/browse/SDK-18039
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxScrollBar.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxHScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxHScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxVScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxVScrollBarThumbSkin.mxml

    Hi Simon,
    my concern was that a small inaccuracy of the input could result in a large inaccuracy of the output, similar to the difference of two nearly equal numbers. The method seems to make use of the perspective distortion of rectangles which sometimes is small, particularly if the distance is large and the patches are small. But I have convinced myself that the problem is academic and nothing to worry about, at least if one keeps to the recommendations of the shooting guide. Nonetheless I think that it is a good idea to check each profile by means of a test image before one uses it routinely. Thank you for your help!
    Helmut

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • I replaced my printer. Now Itunes help wants to print to my old printer. How do i change the printer in Itunes?

    I replaced my printer with an newer printer. Now itunes Help wants to print to my old printer.How do I change Itunes to print to my new printer?

    Sorry, It was not Itunes. My laptop had reverted back to my old printer.

  • Hello, i designed a logo in RGB format,1600 X 900 pixel...i m using this logo in website and also i wanted to print it in broucher...i m cofused for the setting n size...plz help

    i m confused about logo size and format plz help me out...@

    You can design one logo for both purposes. But you cannot save just one file suitable for both. You need to make the design and then make a reduced size JPEG or PNG for your web site. You also need a version for print, but unless you know what is needed you cannot save it. Just keep the original PSD until you hear what your printer or designer needs for the brochure.

  • Just started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

    I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

    Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.

  • Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

    Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

    Sorry, but no help is possible. You can only use the UAE iTunes Store, and Apple can only offer what content they are able to license for sale in that country. You'll have to look elsewhere for content. Whether there are any other download stores able to sell in the UAE I don't know. You may need to purchased CDs and import them into iTunes.
    Regards.

  • Hi ....using iphoto '08, but whenever i export photos to mail, they all come out small size, regardless of which size i choose. please help.

    hi ....using iphoto '08, but whenever i export photos to mail, they all come out small size, regardless of which size i choose. please help.

    After they get into the email go to the small menu at the lower right hand corner of the Mail window and select the size you want:
    Click to view full size

  • How to reduce a PDF file size under Adobe Acrobat Reader DC. The size is now 23MB; I need it to be less than 4MB. thanks

    how to reduce a PDF file size under Adobe Acrobat Reader DC. The size is now 23MB; I need it to be less than 4MB. thanks

    I've found in Pdf's many time when you go to Optimize a PDF and look at the font list there are often up to a 1/2dozen copies of a given font, say Helvetica, then that many Helvetica Bold, or Arial or Ariel Italic
    What I do ie remove from list all but one copy of each different font. often dramatically reduces the size. also something lese is Flattening images will in some cases reduce a file size. I have run into a case where it actually made a PDF Larger.

  • HT4623 i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

    i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

    It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
    If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

  • Early today Alt, Ctr and Click and drag changed the brush size. Now it makes the move tool work. Anyone have this problem. I think Adobe had an update and put a bug in the program.

    Early today Alt, Ctr and Click and drag changed the brush size. Now it makes the move tool work. Anyone have this problem. I think Adobe had an update and put a bug in the program.

    Which version of photoshop and operating system are you using?
    windows:
    Alt + right click + drag left or right
    mac:
    Control + Option + left click + drag left or right

  • I have an iphone and after upgrading it`s system i can not open videos now.Please help me

    I have an iphone and after upgrading it`s system i can not open videos now.Please help me

    Trash the prefs in the preferences folder.
    Important Directories
    Mylenium

  • I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

    I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!

    go to settings
    then to store
    tap your id then click sign out
    then sign back in and you should be fine

Maybe you are looking for

  • Backup to Windows Network Share

    Hello, I want to backup a Oracle Database to a Windows Server via Network-Share. I set backup_root_dir = servername\share. The sidadm and sapservicesid have full access to the share. If I start the backup I get a error message: BR0282E Directory '\\s

  • [Solved] Chromium always in full screen mode

    Does it happen to anyone else? Since yesterday, chromium starts in full screen mode, and, no matter what you do, press f11 or whatever, it does not go back to normal mode... pretty annoying.... I have been looking for info and some people say its bec

  • Epson Photo r200 - won't add, doesn't show up after software install

    I can't get an Epson R200 photo printer to work with the IMAC running OSX10 I have used the included cd to install the drivers, as described in the manual. I have downloaded new drivers from EPSON.com and installed them. I have downloaded all OS upda

  • MEMORY, What is it good for.....

    ...absolutely something. I'm sure of it, but was wondering... I just added 4Gb to my 1.8MHz single G5 I was wishfully thinking it would help speed up things using Archicad. (the min. spec is 1.5 Gb... which I had before upgrading). Did a few tests be

  • Homesharing, updating and syncing issues.

    Me: iPhone 4 Older Macbook OS 10.4.11 iTunes 9.2.1 Husband: iPhone 3GS <1 year old Windows Vista PC iTunes 10.0.1 1 iTunes account between the 2 of us. I recently upgraded from iPhone 3G to iPhone 4 but found out that the 4 is not compatible with the