CDR report not working
Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender
Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender
Similar Messages
-
Drill down report not working in 1og report
hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanksHello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards -
IPS event monitor and reports not working
Dear after upgrading my IPS from E3 to E4 the event monitor and reports not working, can you please advice my to solve this issues
Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4 Feb 14 2014 15:33:22 39715 514 IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
hostId: SSM02
appName: sensorApp
appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature: description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
subsigId: 0
sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
attacker:
addr: 172.x.x.x locality=OUT
port: 39715
target:
addr: x.x.x.x locality=OUT
port: 514
os: idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz -
After i install Visual-Studio 2013 crystal-report not working
hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Interactive Reports not working with APEX listener
Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
BaigSorry for late response.
It was a firewall issue -
Discoverer report not working on R12 !
We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
ThanksThanks Srini,
There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
Any pointers? -
Crystal Report not works in JAR File
I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there. -
Dynamic Selection on report not working
Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
NasAlso Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks -
Report not working in my system
Dear All,
I have Developed a ZHR report. But the problem is the it is working only on my ABAPers Terminal(PC) and not on mine.
Not working means the Action that it should trigger in PA40 is not happening.
The Client is same.
The User ID is same.
The User parameters are same.
The GUI Version is same.
The authorizations are the same.
Is there any other setting that i need to check.
Regards,
Saureb Bannerjii
SAP HR Consultanthi,
one possiblity is to check the user profile of your abaper's login and your login. If you are using different login id for checking the reports
Regards
SAmeer. -
Report Not working in the Web Browser
Hi ALL ,
Am working on a item SKU report . The report is running fine in the BIDS but once i try to view the report in the WEB Browser
tried both Mozilla and Internet Explorer no data is shows up .
The report has 2 report filter one is on the service and the other one is the item sku its a multi - parameter that contains
a list of more than 6000 different SKU . Can the filter be the reason for the report not displaying in the web browser.
If yes kindly advice me what the workaround for it .
I tried having the filter in the SQL main query but it was of no use no data it was showing after having the ssrs report filter
at least right information its showing but in the BIDS not in the main web browser.
Kindly Help
PriyaHi Priya,
According to the description, I understand that there are parameters (@SKU and @SKUlist) in the report, and SKUlist parameter is multi-value parameter. When selecting values of the SKU parameter, the parameter SKUlist will display corresponding values. In this
case, you should create cascading parameters, right? And you use parameters to filter the report.
Because the data of the report can be shown in the Business Intelligence Development Studio (BIDS) environment, the issue only occurs after deploying the report to report server. Based on my research, I think it may occur because of web browser issue. I have
known you use Mozilla and Internet Explorer to view the report but there is still no data.
In Reporting Services, not all report functionality is supported by all browsers. In this scenario, I suggest you considering the aspects of the setting or third party add-ons of Internet Explorer (IE). You can refer to the steps below:
1. Click Tools -> Internet options.
2. Switch to the Security tab, click Local intranet, and then select Default level.
3. Switch to the Advanced tab, and click Restore advanced settings.
4. Temporarily disable third party add-ons. For detailed steps, please see the link:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
Reference:http://technet.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
On Demand Sub-Report not working
Hello,
I am using crystal reports xi-r2 I am having trouble getting an on-demand sub-report to work. After much trouble I am able to get the sub-report to work in the designer but as soon as I publish the report and access it from the CRS. It stops working. I can not get the sub-report to come up. Or it opens another window like it is going to show the sub-report but I get the original report again.
My second question is how do I open a trouble ticket now that this has all moved to SAP?
Thanks for your help.
JeffAs this isn't working in CRS you may want to re-post this to: BusinessObjects Enterprise Administration
www.service.sap.com would be a good place to go to get service -
R12 Report customised report not working.
i have developed a report in R12 for purchasing module.
simple quey: select * from po_headers_v where po_number=45;
in Before report trigger.
mo_global.set_policy_context('S',101);
In PC report is working but didn't show any record when i attach it R12.We have had a similar problem in R12 with getting data output from custom reports pulling data from purchasing tables such as PO_VENDORS.
You have to add this in the after parameter form trigger of the Oracle Report:
SRW.USER_EXIT( 'FND SRWINIT');
Do not call it from the before report trigger like I was used to doing under 11i. This user exit sets up various Oracle Report environment info, including initializing Oracle Reports to work with the new multi-org system used by R12.
Don't forget to call this in the after report trigger:
srw.user_exit( 'FND SRWEXIT' );
Also under R12, you need to set the Operating Unit Mode setting on the web based define concurrent program page. Go to (R) System Administration -> (N) Concurrent -> Programs, once you have queried up your concurrent program for your report, click the Request tab. You will find the Operating Unit Mode option there. This Operating Unit Mode option needs to be set to Single for most R12 instances. This mode setting is not available in the Oracle Forms concurrent program define form, so watch out!
Cheers
Daryl -
Crystal report not working on 64 bit machine
Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa KhanAlso, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Report not working on web server iis7
I have just designed a website and added a sap crystal report. The report is working fine when i am running it using VS 2010. But when i am publishing it on iis7, .net framework 4.0, windows server 2008. I have also tried with latest version of crystal report. But it does not showing any thing when i am trying to run it on published server.
The report shows nothing in Mozilla Firfox but in ie it shows an error 'bobj' is undefined. in both browser the cr viewer adder form's post back of dropdownlist not working.But when pressing submit button it's post back happening but no report showing.I have tried with several solution on net but it does not working when i publishing it on server but doing well with vs2010 debugger.
I am using vs 2010 professional, but service pack not installed.
Pls help me in this regardHi,
Top right cornor has a text box. Type "bobj is undefined" & you would find many KBs, forums & blogs.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=bobjisundefined
Thanks,
Saurabh -
Siebel 8117 and BIP Multilingual reports not working.....
Hello,
We went live with Siebel 8113 and BIP. We have Siebel Reports configured in 4 languages and the choosing the language and locale on report generation pick applet worked fine with correct translated report coming out.
We have upgraded Siebel to 8117.
Reports stopped working. Applied 8117 related BIP objects(only repository objects and seed data - ACR 719B) then default language, ENU, reports worked fine. But other languages are still generating ENU reports.
Applied QF0703 in Tools (It has SIEBEL_BIP_8117 Extension SIF) and deployed the SRF.
Only two things from 8117 BIP related items we missed.
a) EIM Table related schema changes. This is of no use for us as we don't use EIM.
b) LMU files were not imported into tools. Each time I tried to import an LMU, it gives an error that site "http://www.oasis-open.org/committees/xliff/DTD" is an invalid site. On checking in browser found that it should be https and changed it in one language XLIFF. Once the transport changed to http, comes an error that the patch is invalid".
Not sure what is the importance of LMU OR how to get around it.
Any suggestions are appreciated.
-Ravi-Can anyone help me on this please?
Maybe you are looking for
-
Java will not work on Firefox 3.6 and 4.0.Why?
After upgrading toFirefox 3.6 and 4.0 cannot get Java to work. Uninstalled several times with both versions,and reinstalled the same.As soon as Iclick on a Java site Firefox freezes and does not respond
-
How to check how this table is populated in PL/SQL
Hi, This is based on assumption that it using a trigger , function or procedure to update this table tbl1 how can i find out how tbl1 is being updated ? do i check thru those "referenced by" ? or it updating another table set off a trigger that updat
-
How to use boolean operator to get count
Hi All, In my query i need to add a field Count which shows number. Meaning, Column A ColumnB ColumnC Count 100 50 0 2 55 60 76 3 79 0 0
-
Create new tax code for Belgium company code.
Dear friends , We are fighting to find a way to create a new tax code for a Belgium company that do the posting below: Credit: Supplier 1000,00- EUR Debit: GL Account X 1105,00 EUR Credit: Ta
-
Inserting Fireworks HTML into a Dreamweaver template
I've created a dreamweaver cs3 template for my website. I've also created a menu in fireworks which has popup menu's. If I create a new page (not from a template) and insert the fireworks html, everything works fine when I try to preview it. However,