CE 7.1 EHP1 installation questions

Can we install CE 7.1 EHP1 64 bit version with SQL Server standard edition? The PAM says it supports SQL Server 2005 enterprise edition. I am wondering whether it supports SQL Server 2005 standard edition?
Another question is what is the near time future for supporting SQL Server 2008 as PAM doesn't say anything about SQL Server 2008 for CE 7.1 EHP1.
Does CE 7.1 EHP1 support windows 7.0?

Hi,
Exectly I didnt find something but sure these thread will halp you
1.[NWDS 7.1 + Windows Vista Ultimate |/thread/1427240 [original link is broken];
2.[NDWS on Windows 7  |NDWS on Windows 7;
(good question for Next TECHED)
Best  Regards
Satish Kumar

Similar Messages

  • EhP1 installer error (RFC of "SUBST_START_REPORT_IN_BATCH" failed)

    Hi,
    we are trying to upgrade our CRM 7.0 to the EhP1 and the EhP1 installer is blocked with the error:
    Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
    Last error code set: RFC call to SUBST_START_REPORT_IN_BATCH failed with key RFC_ERROR_SYSTEM_FAILURE (SYSTEM_FAILURE): connection closed without message (CM_NO_DATA_RECEIVED)
    Log files report the following errors:
    (altntfi.sav)
    #---- MASKING file ALTNTFI.LOG from G:\usr\sap\CR7\EHPI\abap\log
    #---- TIME: 20111125115607  PHASE: ALTNTAB_FILL
    1 ETQ201 Entering upgrade-phase "ALTNTAB_FILL" ("20111125111509")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '02', GwService = 'sapgw02'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPSR4
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ200 Executing actual phase 'MAIN_SHDRUN/ALTNTAB_FILL'.
    1 ETQ399 Phase arguments:
    2 ETQ399 Arg[0] = '30'
    2 ETQ399 Arg[1] = 'ALTNTFI.ELG'
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '07', GwService = 'sapgw07'
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ010 Date & Time: 20111125111509 
    4 ETQ265 Starting report "RDDNT2MT" with variant "SAP_INIT" in batch
    4 ETQ359 RFC Login to: System="CR7", Nr="07", GwHost="SYSKCRMDEV1", GwService="sapgw07"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
    2EETQ360 RFC of "SUBST_START_REPORT_IN_BATCH" failed:
    2EETQ361 code/exception  : SYSTEM_FAILURE
    2EETQ362 key             : RFC_ERROR_SYSTEM_FAILURE
    2EETQ364 message         :
    2EETQ399 connection closed without message (CM_NO_DATA_RECEIVED)
    4 ETQ359 RFC Login to: System="CR7", Nr="07", GwHost="SYSKCRMDEV1", GwService="sapgw07"
    4 ETQ232 RFC Login succeeded
    2EETG894 Exception "SYSTEM_FAILURE" raised, write variant failed with error code -1
    2EETG890 Exception "SYSTEM_FAILURE" raised, job scheduling failed with error code -1
    2EETQ261 Start of batchjob "RDDNT2MT" failed
    4 ETQ010 Date & Time: 20111125111548
    We have logged through GUI to the shadow instance but we can't test the function module SUBST_START_REPORT_IN_BATCH: the shadow instance continuously dumps (in SE37, ST22, ST11, SU01... with dumps LOAD_PROGRAM_CLASS_MISMATCH, GETWA_WRONG_LENGTH, LOAD_TYPE_VERSION_MISMATCH...). When I don't have a dump (i.e. I try to activate the function module in SE37 without opening it), the GUI closes with the error: "Work process restarted, session terminated " and in the logfile dev_disp shows me:
    Fri Nov 25 11:15:30 2011
    *** ERROR => DpHdlDeadWp: W5 (pid 17996) died (severity=0, status=0) [dpxxwp.c     1522]
    Any help would be greatly appreciated.
    Thanks,
    Davide

    Hi Davide,
    Please try out below mentioned steps
    Set the USER Environment Variable u2018auth_shadow_upgradeu2019 to u20181u2019 for the <SID>adm user (set the variable while logged in as that user)
    Change the Shadow Instance service to run with the <SID>adm account
    Stop the Shadow Instance (you can leave the Central and SCS Instances running)
    Start the Shadow Instance
    Continue the EHPI process from where it left off
    Hope this helps.
    Regards,
    Deepak Kori

  • Problems with SAPUSER Table / ORA-1403 during PI 7.1 EHP1 Installation

    Hello,
    as I have currently problems creating a customer message with the customer provided S-User and I need a solution after the easter weekend, I'll try my luck here...
    We currently perform a SAP Netweaver PI 7.1 EHP1 installation on Windows 2008 (Enterprise)/ Oracle. The installation media were downloaded from SAPNet.
    The Windows Server 2008 is completely udpated, no further patches are available.
    The Windows system is patched according to note 1375494 (new SAP kernel does not work on Win2008 without).
    Oracle 10.2.0.4 was installed previous to the installation.
    During the installation the new independend and db-dependend kernel was provided.
    First steps run smoth until Phase ABAP IMPORT. This one fails according to the logs because access to table SAPUSER is not possible:
         Compiled Jan 15 2010 23:56:22
         E:\usr\sap\PID\SYS\exe\uc\NTAMD64\R3load.exe -testconnect
         DbSl Trace: ORA-1403 when accessing table SAPUSER
         (DB) ERROR: db_connect rc = 256
         DbSl Trace: ORA-1403 when accessing table SAPUSER
         (DB) ERROR: DbSlErrorMsg rc = 99
    I already checked the OPS$ mechanism. Starting SQLPlus /nolog and login with "connect /as sysdba" works as intended.
    i.e. "select owner from dba_tables where table_name = 'SAPUSER';" shows:
         OWNER
         O$HERDER_DOMAIN\PIDADM
    Which is ok, the Domainname and SID is correct.
    "select * from "O$HERDER_DOMAIN\PIDADM".SAPUSER;" show:
         no rows selected
    Comparing this to another recently installed system there should be something like this:
         USERID
         PASSWD
         SAPSR3-CRYPT
         V01/0050ZctvSB67Wv2haiQTDrO5P5c7Ks/kyqpdQ7jDbQ==
    But I'm not really sure, if this entry should be there at this installation phase.
    If so, how is this entry created? Note 50088 describes how to handle this, but with other USERID and without encrypted PASSWD.
    I have no idea, why this happens, I recently installed 2 ECC systems and 1 Solution Manager systems and had no problems installing them.
    I already exchanged the control.xml according to note 1249469.
    I cannot find any note for this situation, so please ... is there anyone out there with an idea?
    Best regards
    Christian Reitz

    Hi,
    thanks for the answer... as I read your answer, I had some doubt, and unfortunately I was right.
    Altering the users PW does not write into the SAPUSER table... why should it? Altering an oracle user does not effekt this SAP table.
    In the meantime I started from scratch. Complete new installation of Win2008, patching, etc.
    ... same issue.
    I don't know, why this happens... I cannot find another hint what happend before, when the user should be added into the table.
    Any ideas? Anyone?
    Thanks for help in advance.
    Christian

  • Photoshop Elements 10 Installation Question

    How can I tell if my software installed properly? The software came with three discs, and it only installed the first disc. I am new to Photoshop, and do not know if my software installed properly? Can anyone help?

    Gautham K,
    Thank you for your quick replies. I have checked,and my OS is indeed 64 bit. I have been using the 32 bit version of Adobe Photoshop Elements 10, since I installed it last evening. I have a few quick questions;
    Will I loose any functionality if I stay with the 32 bit version versus un-installing and installing the 64 bit version from disc 2?
    If I decide to un-install, and re-install from disc 2, will there be any software registration issues (as I have already registered the software)?
    Thanks again for all of your help.
    Jim
    Gautham K <[email protected]> wrote:
    Gautham K http://forums.adobe.com/people/Gautham+K created the discussion
    "Re: Photoshop Elements 10 Installation Question"
    To view the discussion, visit: http://forums.adobe.com/message/4062666#4062666

  • Installation Questions Documaker 12.3 Enterprise Edition

    We are looking to install Documaker 12.3 Enterprise Edition and have the following installation questions:
    When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side.  There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
    Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do.  Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install?  If it’s not possible, can we get a look at the documaker scripts before we run them?
    We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?

    When installing Documaker can we have our own VM in our own OU for the WAS application servers? This will make maintenance easier on our side.  There doesn’t seem to be anything in the documentation saying this is a good or a bad idea.
    The typical installation scenario is to have 3 tiers - application (WAS), application (Documaker), and data. WAS tiers host web applications (Dashboard, Administrator, Interactive) as well as providing database connection pools and JMS queues for messaging - it is expected that the WAS environment is a clustered environment and that the applications are deployed to the cluster members, which can be physical or virtual. For the Documaker application server, these can be physical or virtual as well. It's recommended to install Documaker on single-purposes environments, however there's nothing to prevent you from doing otherwise. The Documaker applications are self-contained JVMs and can be tuned accordingly.
    Our WAS Admins would like to know what the scripts in the Post-Setup documentation actually do.  Is it possible to use our existing scripting environment to build the necessary pieces instead of using scripts from the documaker install?  If it’s not possible, can we get a look at the documaker scripts before we run them?
    The installation process (currently) writes the scripts according to responses provided during the installation process. The scripts can be reviewed/modified prior to execution.
    We would like to know if WAS 8.5 is supported, or if version 7.0.0.27 in the requirements pdf is the only version supported?
    The official supported version of WAS is 7.0.0.27, however WAS 8.5 may be suitable (I believe there might be a fix pack requirement there - would recommend you submit a question to Oracle Support for verification).

  • Apache or Oracle installation questions

    Which discussion group is best for asking Apache or Oracle 8.1.7 installation questions?

    FRED
    Apache is best addressed on the ias 9i forum.

  • X79-gd45 (8d) - Windows 7 Pro x64 installation questions

    Hi,
    I have a MSI X79-GD45(8D) board with i7-3930k processor that I am trying to install Win 7 x64 Pro on.  I have a Sandisk Xtreme 240 SSD that I will be using as a system disk and 2X WD 1TB Black SATA 6GB/s (faex) drives that I will be using in a RAID 1 configuration for storing quickbooks and other data.  This machine will run a quickbooks enterprise server serving 10 people
    I want to get the installation right from the get go so that I can start testing it asap.  Here are the steps that I will be taking to get this going.  Could you folks comment on it so that I can modify it as needed.  Thanks.
    I have already installed the main board, 32GB RAM, Processor, fans etc and have setup the case.  It does post without issues so far.  Now for the installation, I have not partitioned the SSD (intend to make use of the full 240 GB) and leave the WD disks in a Raid 1 taking up the whole disk space (no partitions).
    I am installing Win 7 x64 Pro on the SSD.  Here I have several questions:
    1. Do I set the SATA mode to RAID or should I just leave it at AHCI? I am assuming that this board recognizes drives in AHCI mode and installs Win 7.  I ask this question because I will be using two WD SATA drives in Raid 1 for storing data later.  Will the SATA mode be AHCI irrespective of that fact or should I change it to RAID after installing Win 7?
    2. Should I install Intel RSTe iaAHCI or iaStorA (ver RSTe_Win7_8_64bit_3.5.0.1101_F6) with the F6 option for the setup I mentioned.  I know the F6 installation in Win XP, but a little confused with Win 7.  I ask this because, I have read some discussions of Intel drivers vs Microsoft's version for AHCI.  Raid is confusing though.  Please explain in detail if you can.  Appreciated.
    3 If I do F6 installation, do I install the AHCI/RAID drivers again after Win 7 is installed or does Windows properly load the F6 installation?
    SSD, AHCI are all new to me with this build.  I have tried to educate myself, but have some of the confusions that I listed above.  Please explain how I can properly install it to the spec that I outlined above.
    Your time, patience and help are all appreciated.  Thanks
    t
    core - i7 3930k
    MSI X79-GD45 (8D) MB
    CoolerMaster 212 Evo Directpipe cooler (push pull 2 fans)
    Corsair 500R Case with fans in the front, back, side, top (lots of air movement) - Holding steady at 42 C idle (efi readings)
    32GB Patriot Cas 10 1600MHz XMP certified memory (XMP enabled in efi)
    Gigabyte 6670 HD video card with 1gb ddr3(this machine will be used as a QB server)
    Will install Win 7 x64 pro

    Quote from: tommycat95 on 16-December-12, 12:17:35
    Hi,
    I have a MSI X79-GD45(8D) board with i7-3930k processor that I am trying to install Win 7 x64 Pro on.  I have a Sandisk Xtreme 240 SSD that I will be using as a system disk and 2X WD 1TB Black SATA 6GB/s (faex) drives that I will be using in a RAID 1 configuration for storing quickbooks and other data.  This machine will run a quickbooks enterprise server serving 10 people
    I want to get the installation right from the get go so that I can start testing it asap.  Here are the steps that I will be taking to get this going.  Could you folks comment on it so that I can modify it as needed.  Thanks.
    I have already installed the main board, 32GB RAM, Processor, fans etc and have setup the case.  It does post without issues so far.  Now for the installation, I have not partitioned the SSD (intend to make use of the full 240 GB) and leave the WD disks in a Raid 1 taking up the whole disk space (no partitions).
    I am installing Win 7 x64 Pro on the SSD.  Here I have several questions:
    1. Do I set the SATA mode to RAID or should I just leave it at AHCI? I am assuming that this board recognizes drives in AHCI mode and installs Win 7.  I ask this question because I will be using two WD SATA drives in Raid 1 for storing data later.  Will the SATA mode be AHCI irrespective of that fact or should I change it to RAID after installing Win 7?
    2. Should I install Intel RSTe iaAHCI or iaStorA (ver RSTe_Win7_8_64bit_3.5.0.1101_F6) with the F6 option for the setup I mentioned.  I know the F6 installation in Win XP, but a little confused with Win 7.  I ask this because, I have read some discussions of Intel drivers vs Microsoft's version for AHCI.  Raid is confusing though.  Please explain in detail if you can.  Appreciated.
    3 If I do F6 installation, do I install the AHCI/RAID drivers again after Win 7 is installed or does Windows properly load the F6 installation?
    SSD, AHCI are all new to me with this build.  I have tried to educate myself, but have some of the confusions that I listed above.  Please explain how I can properly install it to the spec that I outlined above.
    Your time, patience and help are all appreciated.  Thanks
    t
    core - i7 3930k
    MSI X79-GD45 (8D) MB
    CoolerMaster 212 Evo Directpipe cooler (push pull 2 fans)
    Corsair 500R Case with fans in the front, back, side, top (lots of air movement) - Holding steady at 42 C idle (efi readings)
    32GB Patriot Cas 10 1600MHz XMP certified memory (XMP enabled in efi)
    Gigabyte 6670 HD video card with 1gb ddr3(this machine will be used as a QB server)
    Will install Win 7 x64 pro
    1.) IF you are going to be using the mainboads raid controller for the data drive. You need to set the mode to raid for the os install as well. Unless you are going to use the extra chipset for the SSD. (Ports 7 &8) You won't be able to enable raid later w/o re-installing the os.
    2.) I put the os(Install) on a usb flash drive, I also include all of the drivers on this flash drive and load the newest versions even if it detects the drive right out of the gate.
    3.)Once inside  the OS, you would install the irst drivers there as well. (They are combined the raid bios / drivers and os drivers)
    If this isn't going to be a very high I/o server, I probably wouln't bother with the SSD but since you have it you would just use it as a non-member drive of the raid. Have a fast drive for the os, isn't going to help the server all that much as most of the I/O will be on the data drive.
    If this is going to be a heavily used server(high i/o) you may want to look at a raid 5 configuration for the os and data drives. As SSD's degrade over time and aren't really optimal for contant use like in a server. Raid 5 requires 3 drives minimum and is striping and mirroring so you get the best of both worlds.
    http://en.wikipedia.org/wiki/Standard_RAID_levels
    However, the board based raid controller isn't really the best for this set up. I am fairly loyal to Adaptec Raid controllers although you need to contact Adaptec (or whoever) in regards to compatiblity as MSI doesn't test server compoents on thier desktop products.
    This is the one I last used:
    http://www.neweggbusiness.com/Product/Product.aspx?Item=N82E16816103220
    Quote
    PMC-Sierra PM8013 Dual Core RAID on Chip (ROC)
    Enclosure management support via LED header and SES2/ SGPIO
    Intelligent Power Management – Reduces power and cooling costs by as much as 70%
    512MB of DDR2 667MHz
    Although it is probably overkill in your situation.
    Also, look into the SAS drives as opposed to the sata drives. (if you use a raid card)
    http://www.techrepublic.com/blog/networking/how-sas-near-line-nl-sas-and-sata-disks-compare/5323
    Also see: http://www.microsoftstore.com/store/msstore/pd/Windows-Server-2012-Essentials/productID.258685800/search.true

  • PI 7.1 with EHP1 installation interruption

    Hi Friends,
    I am trying to install PI 7.1 including EHP1 on Windows 2003 Enterprise Edition x64 and Oracle 10.2 Enterprise Edition.
    I am able to install the ABAP stack without any problems successfully. But during the AS JAVA installation, at the Oracle Database screen in SAPInst, I enter the passwords for SAPSR3 & SAPSR3DB and when I click NEXT, I get
    " The DB Home folder D:\oracle\PI7\102\db_1 has not the correct DB Server version 102. Select a different DB Home folder or install the correct database server software. "
    The message of sapinst.log  - System call failed. Error 1816 (Not enough quota is available to process this command).
    This is a surprise as I have 22 GB of swap space.
    The messages of sapinst_dev.log -
    TRACE      2009-12-21 00:16:54.665
    NWDBora.validateDbHome(start): D:\oracle\PI7\102; 102
    TRACE      2009-12-21 00:16:54.665
    NWDBora.validateDbHome(numRows: 0
    TRACE      2009-12-21 00:16:54.665
    NWDBora.validateDbHome(done): false
    The DB Home folder D:\oracle\PI7\102 has not the correct DB Server version 102. Select a different DB Home folder or install the correct database server software.
    Has anybody experienced this issue ? Can someone provide me a suggestion/advice ?
    Thanks in advance....

    > When I complete the Oracle DB installation through sapserver.cmd, apart from iSQL service, no other service gets installed including the Listener.
    This is correct and expected.
    > Registering the Listener manually doesnt help either. Hence, obviously, there is no connection to the database instance. But this issue doesnt arise when the installation is completed through setup.exe . All 5 services of the Oracle DB gets installed and the database instance is connected.  I wonder why or where I am going wrong !!
    Nothing wrong. Use sapserver.cmd.
    The way is:
    - install the Oracle software delivered on DVD
    - install the latest patch (10.2.0.4)
    - install the latest interim patch for 10.2.0.4
    THEN start sapinst.
    The sapinst installation procedure will install/configure the Oracleservice<SID> and the listener.
    Markus

  • New Challenge in SAP NW BI 7.0 with EHP1 installation, separate stack+MCOD

    Dear all,
    I was working in SAP security but project specific work had switch me to BASIS.
    I have serched all my doc and inst guide....
    Here is the scenirio:
    1. Need to install SAP NW BI 7.0 with EHP1
    2. Database Oracle 10.2.0.4
    3. Oracle in AIX system
    4. SAP instance in Wind 2008
    5. I have completed DB installation.
    6. Run the Prerequsite check in AIX as ABAP system.
    7. Now plan to install SEPARATE stack AS ABAP and AS JAVA as SAP recommends here with BI content ADD on.
    8.Please advice next step by step Guide here WITH mc.od
    I promise to share the doc with screen shot after complete and would submit in forum for next generation.
    Thanks,
    Manas

    Hi Manas,
    I need to install SAP BI 7.0 and am just a beginner.
    Can you please help me through this ?

  • Adobe AIR installation questions

    Hi all,
    I'm looking into the possibility of distributing an application with Adobe AIR and I've a few questions about the Adobe AIR installation process. Just to give you some background on the situation I'm in - if a user wants to use the service I'm working on, they need to install a binary application on their computer. We've a web site which communicates with this binary application. As the user as to install the binary application to begin with, we're beginning to look at AIR as a possible alternative to distributing the web content through a browser.
    1. Adobe AIR installation requests that the user enters their computer password. Is there any way to retrieve this password from a separate installer? The binary application that we ask our users to install asks the user for their password and it would be nice to not ask the user to enter their password twice. Are there any possibilities for sharing this password between our binary application and the Adobe AIR installer?
    2. If I sign up as a re-distributer of AIR, is the Adobe EULA which is displayed at the start of installation still necessary? I'm already displaying one EULA (with the binary application) and I'd prefer not to have to display two.
    3. I'm assuming that there is no way to specify the directory into which I'd like the Adobe AIR runtime to be placed - can you confirm that Adobe AIR is always installed in the /Applications folder on mac and c:/Program Files on Windows?
    This question goes out to Adobe AIR developers - If you have distributed your application with Adobe AIR, have you ever stumbled across the situation where a user has uninstalled the Adobe AIR runtime (either intentionally or unintentionally) and you are now left in a situation where a user cannot access your services because Adobe AIR is not installed on their computer. If so, are you aware of any usable fallbacks other than to tell customers that they have to have Adobe AIR installed to run the application?
    Thanks
    Sean

    1:  We are working on a method to use a local socket to communicate with an installed c# application on the users machine.  The situation is very similar, however we store credentials encrypted and accessible to the installed binary.  If those credentials do not exist the AIR app requests the user to input them and they are sent to the binary.  These credentials are stored either per session, daily or forever per the user's preferences.  We use this method to let AIR be the front end it was designed to be and leave all the heavy lifting OS / processor wise to the binary.  Unsure if this would help but you can read a bit more on using local sockets here: http://help.adobe.com/en_US/AIR/1.5/devappshtml/WS5b3ccc516d4fbf351e63e3d118666ade46-7caf. html
    2:  The EULA is still required as the End User has to accept it.  If there's a way around that, I'm not aware.
    3:  The installation directory can be changed by the user unless you are performing silent installs (available when you sign a redistribution agreement).  I don't recommend relying on the installation directory never changing.
    Try using nativePath to determine where your program location is: (javascript)
    //application directory
    var file = air.File.applicationDirectory.resolvePath("testfile.html");
    air.trace(file.nativePath);
    //application storage directory
    var file = air.File.applicationStorageDirectory.resolvePath("testfile.html");
    air.trace(file.nativePath);
    4:  I've faced the problem where the AIR runtime is not available, but we always fall back on the badge there.  For what it's worth it's pretty handy at detecting requirements and getting them to the user.
    hope that helps

  • ECC 6.0 with EHP1 installation

    Hi Guys,
    Not able find the correct installation guide for ECC6.0 installation (SR3) on AIX/DB2 platform. Can anybody please provide some link for the same ?
    Also my customer has a requirement for latest available EHP i.e. EHP4. I understand that first we have to install EHP1 and then upgrade the system to EHP4. Is there any other alternative ?
    Please provide some inputs if you worked on ECC6.0 installation with EHP1/4. I'm urgently looking for some help on this.
    Thanks

    Hi Mike,
    If this is a fresh installation then you should go with the ERP 6.0 EHP4 READY SR1 Installation. The plus point will be in ehp4 ready, after the installation the netweaver software components are already on ehp1 and kernel is 7.01, while the ecc software components are still in the 600 level.then you can update it to EHP4 using EHPi.But remember  it is MANDATORY that you should proceed with the EHP4 installation using SAPephi, else i think the system will be in a state where SAP will not support and its not advised to use system like that.
    if you go with the normal installation you'll get version 700 and kernel on 700 and then you take it to EHP4.
    I will go with option one.
    Best Regards
    Niraj

  • NW 7 EHP1 Installation problem - unable to find control.xml file

    Hi,
    I'm trying to install NW 7 with EHP1 on AIX/Oracle environment. My installation got to the stage where SAPinst paused to allow the installation of the Oracle database software. After installing the Oracle database software, I closed down the SAP installation GUI in the hope of picking up the installation at a later date. However, when reattempting to pick up where the installation left off, I recieve the following error when starting sapinst after selecting "continue with old installation" option.
    guiengine: 2010-03-29 11:23:24 Login in progress
    guiengine: 2010-03-29 11:23:24 Login successful
    Mar 29, 2010 10:23:25 AM [Info]: GUI started.
    init: retrieving account information for group sapinst...
    init: retrieving account information done.
    ERROR      2010-03-29 11:24:17.681 [sixxcpars.cpp:50]
    FKD-00048  Unable to open URL file:///tmp/sapinst_instdir/NW701/AS-ABAP/ORA/CENTRAL//control.xml.
    Unable to start a service execution.
    Can anybody please advise me how to resolve this issue if possible?
    Thanks.

    Hi Naveed,
    I can't see any sap inst processes running under the root account, however I can see the following two processes running under oraSID user from the date of my original installation attempt:
    /bin/sh /oracle/DB1/102_64/jdk/bin/java -Djava.awt.headless=true -Doracle.oc4j.localhome=/oracle/DB1/10...
    /oracle/DB1/102_64/jdk/bin/java.bin -Dibm.stream.nio=true -Djava.awt.headless=true -Doracle.oc4j.localh...
    Could this be related to the cause of my issue?
    Thanks.

  • PI 7.1 EHP1 installation?

    Hi Guys,
    we are planning to install PI 7.1EHP1 and i was able to find all the related media on the market place with below link but i could not find the installation master.  DVD.  Generally installation master is always available but i dont see one for PI 7.1 EHP1.
    Installations and Upgrades - Entry by Application Group" SAP NetWeaver" SAP NETWEAVER" SAP EHP1 FOR SAP NW PI 7.1
    any help would be really appreciated
    Thanks,
    Srini

    Hi Michal,
    Thanks Michal. I have downloaded all the required media and started the installation as well.
    They have combined the installation master, kernel and terx in to a single DVD and thats reason i could not find the installation master at the first shot.
    IM/Kernel/Trex - DVD title
    Thanks,
    Srini
    Edited by: Srinivas Reddy on Aug 6, 2009 8:37 PM

  • EHP1 installation for PI 7.1

    Dear all,
    we are trying to install the EHP1 in win server with PI 7.1 db2. After downloading and extracting the SAP EHP installer, when executing the "STARTUP.BAT "jce_policy_zip=<policy zip archive>"" the system returns : cannot determine SAP directory.
    Any help?
    Thank you, Dimitrios

    Authority problem

  • New Tiger 10.4.6  installation Questions

    Just installed a new retail version of Tiger 10.4.6 today. I bought it from Apple. It's up and running and I'm using it now, but I have some questions and things I'm not sure about. When I bought the DVD the Apple rep told me it was not compatible with classic the way my old version of OS 10.1 was. He said the only way I could use OS 9 with it was to reboot to it ( I've already tried that and it works).
    Today I installed Tiger using the custom option as I did not want to erase the harddrive. It would appear that Tiger, during the installation, went through what was on the harddrive, picked what would run on Tiger, and left the rest in OS 9.2.2. Yet, when you click on System Preferences there it is: "Classic". Now I wonder if I can use it?
    It did not load any microsoft applications at all. I did find a folder named "previous system" on the harddrive which I assume is the archived 10.1 : It's a 750.4MB file.
    I have not yet udated to 10.4.11 and I wonder if I need to?

    When I bought the DVD the Apple rep told me it was not compatible with classic the way my old version of OS 10.1 was. He said the only way I could use OS 9 with it was to reboot to it ( I've already tried that and it works).
    That applies to Mac OS X 10.5, not 10.4.
    Yet, when you click on System Preferences there it is: "Classic". Now I wonder if I can use it?
    You can. Some components may need to be updated.
    I have not yet udated to 10.4.11 and I wonder if I need to?
    If the new update contains features or fixes useful to you, you should install it.
    (31696)

Maybe you are looking for

  • GPO (as a whole) problem or Folder Redirection Problem?

    Hello everyone, After a couple hours of looking at different TN articles on folder redirection I just can't get it to work properly. I had some major system errors and had to perform a clean install of the OS. My folder redirections from the old inst

  • How to load configuration using Cisco USB port???

    on USB-flush configuration there. I try to download it gives this: Switch#copy usbflash0: 3560-ST Source filename [3560-st]? Destination filename [3560-ST]? %Error opening usbflash0:3560-st (File not found) What is the Problem? flash formatted on mos

  • Replenishment based on Purchase/process order

    Hi, i am working on a client scenario and i want to know the steps and the process that are involved in the requirements or subsequent steps that are driven from the process order for the replenishment and not from the Min/ Max levels set in the PSA.

  • " is missing - FCP can't see file name to reconnect it

    I have moved a large amount of files assuming I could easily reconnect using media manager. It now says " is missing and seems unable to see that I have 100s of named files to import. The only solution I have is going through each file one by one and

  • Problems on saving a binary file

    Hi, I have a String object that I need to save on disk, in binary format, for a database implementation project. I am using the FileOutputStream class, like this: FileOutputStream fos = new FileOutputStream("file.db"); byte[] arrayBytes = new byte[my