CE 7.1 on Oracle and Windows 2003 Server

Hello,
We have the need to install SAP Strategy Management which runs on NW CE 7.1 on a Oracle and Windows environment.  Acorring to the PAM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0471c41-da0e-2b10-ceb4-a31636f9c83d it looks like CE on Oracle and Windows is supported could someone please verify this?
Many thanks,
Mike

Hi,
Yes, CE is supported on Oracle since SR5.
Best regards, dido

Similar Messages

  • Oracle and Windows 2003 server

    I installed 10gR1 on a 2003 server. When I restarted the server, Oracle would not start (all services set to start automatically). If I stop and restart it through Windows nothing happens. If I login through SQLPlus as sysdba and use the startup command, everything works fine. Any ideas?

    Check,
    Auto-starting Oracle Services
    http://download-west.oracle.com/docs/cd/B10501_01/win.920/a95491/admin.htm#1005941
    And check if there's any error in your alert.log file

  • Oracle with Windows 2003 server

    Hi all,
    I am using oracle 10g /windows 2003 Server with latest patches, the problem is whenever i restart the server instance does not start automatically , i have to start the instance manually.
    how could i troubleshoot the problem , oracle not generating any error log for this, there is no information in alertlog.
    when i chek the db service in services.msc it said , service started and automatic.
    Thanks in advance
    Salai Thenagan Jayavelu

    go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
    Anil Malkai

  • Oracle Discoverer and Windows 2003 Server

    Did anyone know if Discoverer 4.1 is compatible on windows 2003 server?
    Also if Discoverer 10g is also compatible on windows 2003 server?
    Thanks.

    Hi,
    No, Discoverer 4i is not supported with Windows 2003, see Note 332433.1. 10g is compatible with Windows 2003.
    Rod West

  • Calendar Connector and Windows 2003 Server

    I'm trying to get the connector setup and functioning on a windows 2003 server box with outlook 2003, however the install process generates several failures, and never is able to completely finish. Everything goes fine, until it gets to the point of copying files, at which point I recieve a warning about the uninstaller not functioning properly, so I will be unable to uninstall the application, then the installer generates an application error as soon as it finishes copying files. Below is included the OCSETUP.LOG file, should it provide any more information. Thanks for any help.
    Start setup
    Install time: 1-18-2004 01:43:01
    Searching for MS Outlook installation : OK
    Check install package :
    Version :
    Install date : 200312121427
    Enter CheckRequirements.
    Running : Win 2000
    Exit CheckRequirements
    Check admin rights : OK
    Start FillLangIDList
    LCID: 1033
    LCID: 2052
    LCID: 4100
    LCID: 3076
    LCID: 5124
    LCID: 1028
    LCID: 1030
    LCID: 1043
    LCID: 1035
    LCID: 1036
    LCID: 1031
    LCID: 1032
    LCID: 1038
    LCID: 1040
    LCID: 1041
    LCID: 1042
    LCID: 1044
    LCID: 1046
    LCID: 2070
    LCID: 1034
    LCID: 1053
    LCID: 1055
    End FillLangIDList
    Enter GetInstallMode
    Silent install : FALSE
    Exit GetInstallMode
    Loading install dll : OK
    Check if OL is running
    Check OL running exit
    Enter CheckOutlookVersion
    Outlook version : 11.5510
    Get Outlook service option :
    Exit CheckOutlookVersion
    Enter CheckPreviousVersion
    First time install or the uninstall was here before or old version.
    We're installing over another version
    Try to find an old version
    Old version =
    Result check version : 0
    Exit CheckPreviousVersion
    Enter SetupInstall
    Exit SetupInstall
    Enter SetupScreen
    Exit SetupScreen
    Setup screen
    Enter ShowDlgs
    Check the disk space
    Target dir C:\Program Files\Oracle\Outlook Connector
    Select lang
    Select lang: Chinese (Simplified)
    Copy comp: Lang Chinese Si No
    Select lang: Chinese (Traditional)
    Copy comp: Lang Chinese Tr No
    Select lang: Danish
    Copy comp: Lang Danish No
    Select lang: Dutch
    Copy comp: Lang Dutch-Nl No
    Select lang: Finnish
    Copy comp: Lang Finnish No
    Select lang: French
    Copy comp: Lang French No
    Select lang: German
    Copy comp: Lang German No
    Select lang: Greek
    Copy comp: Lang Greek No
    Select lang: Hungarian
    Copy comp: Lang Hungarian No
    Select lang: Italian
    Copy comp: Lang Italian No
    Select lang: Japanese
    Copy comp: Lang Japanese No
    Select lang: Korean
    Copy comp: Lang Korean No
    Select lang: Norwegian
    Copy comp: Lang Norwegian-Bk No
    Select lang: Portuguese (Brazil)
    Copy comp: Lang Portuguese-Br No
    Select lang: Portuguese (Portugal)
    Copy comp: Lang Portuguese No
    Select lang: Spanish
    Copy comp: Lang Spanish No
    Select lang: Swedish
    Copy comp: Lang Swedish No
    Select lang: Turkish
    Copy comp: Lang Turkish No
    Select lang end
    Exit ShowDlgs
    Enter ProcessBefore...
    Exit ProcessBefore...
    Enter MoveFileData
    Enter HandleMove...
    Exit MoveFileData
    Enter ProcessAfter...
    App path : C:\Program Files\Oracle\Outlook Connector
    Exit ProcessAfter...
    Enter SetupRegistry
    Exit SetupRegistry

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • SCEP on ISE 1.2 and Windows 2003 Server

    Hi there
    has anyone ever be able to get SCEP on ISE 1.2 working with Windows 2003 Server? I know Cisco recommends Windows 2008 Server onwards, but sometimes the server infrastructure is not yet there.
    Thanks in advance and best regards
    Dominic

    Hmm, good question that I would also like to know the answer to. All of my deployments have been either 2008 or 2012. I believe long time ago I got it working in my lab with 2003 but then my 2003 server blew up so when I re-created it I did it with 2008. However, I cannot confirm 100% and even if it was true it was not in a full production environment. So it would be nice if someone else can chime in here. 
    I did come across this though that would suggest that it is supported with some tweaks:
    http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html
    Windows Server 2003, Microsoft SCEP (MSCEP) required a Resource Kit add-on to be installed on the same computer as the CA. In Windows Server 2008, MSCEP support has been renamed NDES and is part of the operating system. NDES may be installed on a different computer than the CA (http://technet.microsoft.com/en-us/library/cc753784%28WS.10%29.aspx).
    Thank you for rating helpful posts!

  • OS 10.3.9 and Windows 2003 Server - Can't get to the network

    My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
    The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
    Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
    Thanks.
    Power Mac G5   Mac OS X (10.3.9)  
    Power Mac G5   Mac OS X (10.3.9)  

    My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
    The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
    Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
    Thanks.
    Power Mac G5   Mac OS X (10.3.9)  
    Power Mac G5   Mac OS X (10.3.9)  

  • WRV54G and VPN and Windows 2003 Server

    Hello. I use Windows 2003 Server on my laptop and trying to establish VPN into my WRV54G. QuickVPN is not compatible with the OS, so that's not an option. I tried the manual setup and I got to a point where I had to enter the destination IP address. I use a DynDNS address and so I won't have a static IP.
    I'm using firmware version 2.39.2.
    Thoughts?
    Thanks!

    First thing i would like you to check is if you are able to "ping" the WAN ip address for the WRV54G.
    Also what are the settings that you have on the WRV ??? typically the remote secure group and remote security gateway should be set at "any".
    In the WRV...under the VPn go to advanced VPN and sset the mode to "agressive" , enable keep-alive and netbios broadcast....
    let me know if this work or let me know a few more details.

  • DLU - Zen3.2sp3 and Windows 2003 Server TS

    Hey guys,
    Im using Windows 2003 Server with TS installed for Citrix 4.0 running
    Netware 5.1 Sp7 with Zen3.2 sp3. Are there any issues with DLU working on
    this setup. At this stage its not working. Using the Novell Client 4.90 Sp2.
    Policy works fine on XP Pro, Windows 2000 server and Pro.
    Any help would be appreciated.
    Thanks
    Rami

    rami,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Software Packager and Windows 2003 Server

    I want to make an installation cd ( with Oracle Software Package 2.2.0.16.0) having my software bundled with Oracle Database 9.2.
    I'm getting the following error log generated each time I try to install my components in windows 2003 Server (OSP action = CopyDllGroup):
    java.io.IOException: The system cannot find the file specified
         at oracle.sysman.oii.oiix.OiixJarClassLoader.updateEntriesList(OiixJarClassLoader.java:263)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.<init>(OiixJarClassLoader.java:209)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:412)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:431)
         at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:444)
         at oracle.sysman.oii.oiis.OiisLibraryLoader.loadLibrary(OiisLibraryLoader.java:161)
         at oracle.sysman.oii.oiis.OiisLibraryLoader.<init>(OiisLibraryLoader.java:103)
         at oracle.sysman.oii.oiis.OiisActionLibLoader.<init>(OiisActionLibLoader.java:40)
         at oracle.sysman.oii.oiic.OiicInstallSession.getLibLoader(OiicInstallSession.java:4633)
         at oracle.sysman.oii.oiic.OiicInstallSession.getActionLibLoader(OiicInstallSession.java:4399)
         at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:1046)
         at oracle.sysman.oii.oiis.OiisCompActions.copyGroupActionInner(OiisCompActions.java:885)
         at oracle.sysman.oii.oiis.OiisCompActions.copyGroupAction(OiisCompActions.java:748)
         at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:546)
         at Components.PBDK.v10_2_0_75_16.CompActions.doAction(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompInstallPhase1.doActionP1copyDllGroup2(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompInstallPhase1.stateChangeActions(Unknown Source)
         at Components.PBDK.v10_2_0_75_16.CompActions.stateChangeActions(Unknown Source)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiilActionThr.run(OiicInstallActionsPhase.java:604)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase.executeProductPhases(OiicInstallActionsPhase.java:2199)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase.doInstalls(OiicInstallActionsPhase.java:2052)
         at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiInstRun.run(OiicInstallActionsPhase.java:2945)
         at java.lang.Thread.run(Unknown Source)
    In Windows 2000 Server this installation finished successefully.

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • Clean Access and Windows 2003 Server

    I am trying to install the Clean Access Client on a VM running Windows 2003 Server. When I connect to our customer's network the VPN client appears to connect properly and I see the Clean Access window. Then it all seems to fall over. My customer tells me I should see a blue window with a red OK button on it but I never see it. As a result I never get completely into the network. Is this because I am running this on Windows 2003 Server or should I be looking at something else? Can this run in a Virtual Environment and on 2003 Server?

    I work it out partially by myself:
    1)
    (excuse me, I meant "kinit and Krb5LoginModule" not "kinit and kinit.exe").
    Krb5LoginModule seems to work now (with TCP). The output is:
    KRBError:sTime is Tue Jun 01 17:13:51 CEST 2004 1086102831000
    suSec is 945761
    error code is 52
    error Message is Response too big for UDP, retry with TCP
    realm is SSOTEST.RTC.CH
    sname is krbtgt/SSOTEST.RTC.CH
    KrbKdcReq send: kdc=rtcnt978.ssotest.rtc.ch TCP:88, timeout=30000, number of retries =3, #bytes=232
    DEBUG: TCPClient reading 1496 bytes
    KrbKdcReq send: #bytes read=1496
    KrbKdcReq send: #bytes read=1496
    EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
    KrbAsRep cons in KrbAsReq.getReply sso_testuserCommit Succeeded
    Which is what I want (it tries first with UDP, then the KDC says the TGT is too big for UDP and the client tries again with TCP)
    2)
    I still have the error :-(

  • RoboHelp X5 and Windows 2003 server

    Does enyone know if I have to change some robohelp settings
    when robohelp is installed on a windows 2003 server?
    I'm working on merged htm help files and since we moved all
    files to a windows 2003 server, I noticed that the index and the
    search function of the newly compliled files don't work anymore.
    The search displays the message 'No topics found' when I perform a
    search action in a newly compiled project
    The index only displays the index keywords of the main
    project and not the index keywords of the linked projects.
    I'm looking forward for any suggestion to fix this
    problem.

    Welcome to the forum.
    I hope you mean when robohelp output is published to a
    server, rather than robohelp itself being installed on a server.
    If that is what you meant, look at Snippet 57 on my
    site.

  • 10g RAC on Oracle VM/Windows 2003 server

    Is there any documentation/thread/blog which describes installation of 10g clusterware on Windows 2003 VM on Oracle VM 2.1.2 using just direct attached storage? I created 2 Windows 2003 VMs. For OCR and Voting disks, I created shared virtual disks. These disks are visible from both VMs. When I try to install clusterware, both VMs blue screen about 50% into install. The error in CRS logs points to OCR disks not being in correct format. I have tested same process with VMWare server and it works fine. Do I need to do something different for Oracle VM?
    BTW this is not my first time installing RAC on Windows 2003. I have done more installations than I care to remember but always on physical servers. I followed the same process as I do for physical servers but it seems that Oracle VM does not like the shared virtual disks.
    Thanks...

    Check out my articles at http://dbasupport.com on 10g R2 RAC Clusterware setup. I was able to do that on my vmware BUT I hope to have the very irritating ASM scenario done before my 4th Article.
    Check it out.

  • Cannot establish a link between MacPro and Windows 2003 Server

    I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
    When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
    When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
    My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
    Can somebody help me out with this issue?

    The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
    http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
    Not sure if that's it, but I hope it helps.

  • DataGuard setup between Windows XP Pro and Windows 2003 Server - possible?

    Oracle 9.2. The documentation says "The hardware and operating system architecture on the primary and standby locations must be the same". I understand that this is recommended setup and it will be much better if it will be setup on EXACTLY same hardware and OS. My questions is - Is it possible to set it up between XP Pro and 2003 Server? Had anyone done it successfully the past?
    Thank you

    Hi,
    between XP Pro and 2003 ServerBoth are Win* releases, both are 32bit. So I can't see why it would not work. But I think that certified combination requies that both computers use same O.S. release (XP pro xor 2k3 server).
    Regards,
    Yoann.

Maybe you are looking for

  • Cash Journal Branch creation concept

    Dear Friends, Can any one please explain about the Petty cash in sap. I did the set up in petty cash like creation of Branch account. Please help me to understand the actual concept of petty cash in sap. how its works in the system. Thanks in advance

  • JMenuItems drawn over by JPanel. How to fix?

    Hi. When i add my menu to the frame the actual menu bar displays fine. but when you open the menu the items are drawn over by my jpanel. I tried a way to work around it by adding the menu to the jpanel. when i did this the menu worked and displayed f

  • : Error message whendownloading excel file

    When we are trying to download report to excel, we are getting following error. Earlier this functionality was working ok, after application of support pack sp10 on portal and reapplying SSO on SAP HR side, we started getting following error.. Any he

  • Setting sans-serif font in TextFormat?

    Is there a way to set a generic sans-serif device font when setting the font property of the TextFormat? Or does the font property have to be a specific font name? For example, it would be nice to set the font property similar to how you set the font

  • IPod says "Connected" but iTunes does not recognize

    I plug in my iPod, it says "connected - eject before disconnecting", but iTunes does not show ANYTHING saying it recognizes or sees my iPod... Anyone know what I need to do? I restarted iTunes already and reconnected my iPod, not working...