CE 7.11 Portal login page issue after SPS4 Update

Hi Guys,
Has anyone worked on SP stack 4 update of SAP Netweaver CE 7.11 system?
I ask this because I did this sometime back and immediately after the update, I realized that the text size, alignment, etc. of the text (Username, Password) on logon page of CE portal (http://host:port/irj) changed a lot. The text size became different and even the alignment of the text on this page changed.
But nothing else got affected inside the portal and even the login pages for NWA, Useradmin, etc. were unchanged.
It seems there was an issue with the stylesheet for that page only.
This issue is dealt with in SAP Note no. 1397747, as per which the solution is to apply the latest J2EE Apps patch on the system. But even after applying the correct patch, the issue is not yet resolved.
Has anyone who has done SPS4 update in CE 7.11 faced this issue as well?
Thanks,
Shitij

Well, after raising an OSS message with SAP, they worked on a new patch file for J2EE Applications (J2EEAPPS SPS4 patch 3) and after deploying this patch, the issue was resolved.
So if anyone else faces the same problem, please deploy the latest J2EE APPS patch file by downloading it from service marketplace.
Closing the thread now.
Regards,
Shitij

Similar Messages

ADF Application and Oracle Portal Login Page

We have developed ADF application and deployed it in Oracle AS 10.1.2 along with the custom JAAS module, which is working fine with the application custom login page. As a next page, I want to use Oracle Portal login page for the authentication and authorization.
How can I accomplished it? Any idea?
Thanks,
AP

Shay,
1. I created blank ADF project
2. I copied myreport.jsp file (this one was generated by Oracle Report Builder) under ..ViewController/public_html directory
3. Created directory 'lib' under ViewController/public_html/WEB-INF/lib
4. Copied reports_tld.jar file under the directory created in 3.
5. Created simple jspx page with the af:link (btw af:goLink does not exists in JDev 12c), set 'destination' to myreport.jsp
After the steps above I could not even compile the application, many problems too many to list here, Basically JDev is trying to build the project with .jsp file generated in Report Builder and is unable to.
So to be sure we are on the same page: I am trying to embed JSP report files generated by Report Builder into ADF project, then create EAR file and deploy on standalone WLS. Finally execute JSP web only report.

Not able to pass portal login page with valid credentials using WebDispatch

Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen

' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm

Redirect to Portal Login page from portlet

We have lots of applications on the portal and many of them need the logged in user information to provide the right display context. For example, "My Notes" where notes are stamped with the user's login id. Our portlet applications show exception messages when the user id is unavailable. Pressing a refresh button takes them to the portal login page.
Does anyone know how to redirect to the portal login page? Here is how I would like it to work: A user has the application up beyond the session timeout period and does something that causes the page to submit. At the application server we look for the logged in user ID which is missing due to session timeout and we send them to the portal login page.
Thanks! Mike

Hi James,
 
 I fear this isn´t possible to do with ADDT, as it will - when using its Restrict Access To Page behaviour - always redirect to the page you specified in the Control Panel.
 
 However you can help yourself with a simple custom PHP redirect script
(place it @ @ line 1 of your document) which checks whether the "kt_login_id" Session Variable is set, and if it´s not set, redirect to a different login page:
 
 <?php if (!isset($_SESSION['kt_login_id'])) { header('Location: http://www.example.com/directory/login.php') ; } ?>
 
 Hint: users who login via a different login page will still be redirected to ADDT´s default login page when logging out
 
 Cheers,
 Günter Schenk
 Adobe Community Expert, Dreamweaver

Dynamic Text in SAP portal login page

Hi All,
I want to display some text information in the SAP Portal login page.Is it possible to display dynamic text in the login page?
Can anybody help in this?
Regards,
V Karthi

Check the following links as well.
[Customizing Portal Login Page;
[Portal Login Page Customization;
Check all 3 weblogs.
Regards
Puneet

How to disable right click on SAP portal login page

Hi,
How to disable right click on SAP portal login page. Our requirement is one should not be able to right click -
>view source. on the portal login page.
Best Regars,
Tushar

Hi Tchanvan,
If you search google with "javascript disable right click" you will get loads of javascript code. This will also help you to gain knowledge.
@Explanation to last post : You need to import standard logon par file in NWDS. Create javascript file to disable right click and then include this file in your logon page. i think login page name is portalLogin.jsp and then deploy this new PAR file.
regards,
Jigar Oza

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Date format Issue after HRSP Update

Hi,
We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
When we look at the out put after the interface has run for the vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
Any pointers on how to further investigate and resolve the issue will be most helpful.
Regards

Hello Iside,
In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
Link: http://www.blackberry.com/btsc/KB11320
Please test the date once the software is reloaded prior to restoring the backup.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

Post in the iPad forum, this one is for OSX

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

XMII Portal Login Page

Hi ,
I am unable to view the login screen for the xMII portal.
I tried to access the login page from the system where the xmII server is installed.
When i type in the url -- http://<server>/Lighthammer/Login.jsp it directs me to the menu page without asking my username and password.
Are there any settings to enable the authentication page??
Please help.
Message was edited by:
 vaishali dhayalan

Hi Shyam,
The configuration below is the trusted server configuration for the system being used
Name -- localhost
Description -- localhost
IP -- 127.0.0.1 (IP address of the system used)
I am unable to delete this configuration since my delete button is disabled even after selecting the server config.How else could i delete it?
Will there be a problem if we delete this server config??
Please help.
Message was edited by:
 vaishali dhayalan
Message was edited by:
 vaishali dhayalan

Not able to access the portal login page and idenetity console page

Hi all.
I installed PS 6.1 on a new Solaris 8 Box. DNS is not configured for this box.
I use netscape browser on the solaris boz to test my installation - everything is fine
issue:
When i tried to access the amconsole or amserver/UI/Login application, it bombs with the following exception.
but i can see the default webserver page (or any static html for that matter).
any clue?
10/28/2003 03:22:22:776 PM EET: Thread[Thread-195,5,main]
ERROR: Exception occured
java.lang.Exception: Service URL not found:session
at com.iplanet.services.naming.WebtopNaming.getServiceURL(WebtopNaming.java:180)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:686)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:668)
at com.iplanet.dpro.session.Session.getSession(Session.java:540)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:73)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:280)
at com.sun.identity.authentication.service.AuthUtils.getOrigLoginURL(AuthUtils.java:1546)
at com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:253)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:783)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:434)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:312)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:282)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)

I am facing the same problem. I am using Custom Authentication module. When I access the login page for this custom authentication module I got this error. I have DNS entry and added the IP Adress in the host file too. Anyone tell us, what could be the problem?

Login "Loop" issue after upgrading to Leopard from Tiger-iBook G4

Hi Guys,
I've the same login "loop" issue as described in *Apple KB article #306965* only on an iBook G4, unfortunately the solution offered in the KB article does not help.
There is one slight variant being that the user desktop appears for a second or two after the blue screen following login before it returns (loops) to the login window. It happens on all (2) user accounts.
The interesting thing is it doesn't occur on either account when booting in 'safe mode'.
Apart from deleting these accounts and saving/transferring the data are there any other ideas, suggestions or solutions?
Regards,
BB

Did a clean install, cloned the HD with SuperDuper and then used Mig. Asst. to restore data back to the original HD. All now OK.
A & I was done in the initial upgrade from Tiger.
Cheers,
BB

Change labels on Portal Login page

Hi community,
We are running Portal 7.00 SP21 version and on Portal Logon page we have enabled Get Support link. Now we want to cutomize labels on page wich is shown through the Get Support Link (not welcome page).
If we unzip the file umelogonbase.jar, we can find under dist\PORTAL-INF\lib - we can find the file "logonLabels_" which contains the language we are using. Also we find the key which is used in the tag (for us it is LAST_NAME) and change the text after the equal sign. Then we save the changed file and create a updated JAR file using a zip program but named umelogonbase.jar, not umelogonbase.zip or umelogonbase.jar.zip. - Put again the JAR file back to dist\PORTAL-INF\lib. Restart server, Portal cache and temp files, we don't get applied this change.
This works ok for Welcome page, where by the same way, we can change labes and after restar/clear, we get applied those changes.
So, how can I change the labels on Get Suppot page??
We can not use NWDS....
Thanks !

Hi,
Thanks a lot for your answers.
First, on umResetPasswordPage.jsp I have found the code where "LAST_NAME" must take a value from other file (Could be from umelogonbase.jar?) so, maybe it is not the right place to change it, isn't it? or did you suggest by other way?? This is the code on the umResetPasswordPage.jsp file:
<td width="161" height="20">
 <label class=urLblStd for="logonlastnamefield">
 <%=logonLocale.get("LAST_NAME")%>
 *
 </label>
 </td>
Second, On Portal Content there is not any Page/Iview wich manage this Support (LogonHelpApp) page openned by "get Support" link on Welcome Portal Page. At this time, I could not find if is it a webdynpro or other component Portal....

CE 7.11 Portal login page issue after SPS4 Update

Similar Messages

Maybe you are looking for