Cell colors not showing up

I opened a excel file I created on a PC using Excel on my iWork 09 Numbers and it all worked except the cells I filled with color on PC wasn't showing up in Numbers. Anyone have an idea?
Thanks

Hi Colin,
Welcome to Apple Discussions and the Numbers '09 forum.
I'm assuming you are expecting results similar to these:
A screenshot of the original file (a NeoOffice spreadsheet, saved as an Excel file) is below. Above it is the result of opening the Excel file in Numbers.
Other than visual scale, the only change I note is in the text colour in column E ("Blue"). As I hadn't set that text to White, I checked it in the NeoOffice version and found that the choice of text colour was "Automatic." Numbers apparently does not recognize that setting.
Regards,
Barry

Similar Messages

Spot colors not showing correctly in acrobat 11

Spot colors not showing correctly in the output preview as well as the page correctly. I have a spot pms
295 on a page in a few different areas of text and backgrounds. The spot color shows on 1 of my backgrounds
and text and a spot color on another background does not. These items are on the same page. Although I
can use the eyedropper to check the color of these items and it states the spot color is present. The page
also prints correctly. Previews not happening.

I included 3 screen shots from Acobat 11 of the test requested. Also, included the last screen shot from Acobat 9 of same file.
Which shows correct preview. To eliminate possible ICC profile issue. I did change profiles to all that were in the profile list
with no change in either test.

Gridlines and alternating row colors not showing!?

I selected the entire spreadsheet & invoked gridlines and alternating colors but there are patches where neither one took hold thus is not showing. Anyone know what other setting is off?

Hi,
Can you post a screenshot? Do you mean you selected one table on a sheet by clicking the "bulls-eye" to the upper left of the table? Or did you select cells within a table? (I don't think it is possible in Numbers to "select the entire spreadsheet.")
SG

Background color not showing up in Firefox

I think I am having a CSS problem, but I am not sure. If you
look at this
link
in Firefow you will see that the background color is not showing
up. I put the background color in that table in the HTML as well as
the CSS, but am not getting any love! On another page I did it is
working fine. Click
here and you
will see it working fine.
Is there some small detail that I missed? Any help is greatly
appreciated!!

In fact a whole heap of files are pointing to your hard
drive...
Jo
"Josie1one" <joleros[nospam]@yahoo.com> wrote in
message
news:e35c9r$4ln$[email protected]..
> On the one not working, the file is pointing to your
hard drive:
> <link href="file:///C|/Documents and Settings/nick/My
Documents/Work
> Files/Clients/RKFA/style.css"
> Jo
>
> "Cloudbrk" <[email protected]> wrote in
message
> news:e35btk$41c$[email protected]..
>>I think I am having a CSS problem, but I am not sure.
If you look at this
>>
http://rebeccakoury.com/spiralstapestries/scrollearthtones.htm
in Firefow
>> you
>> will see that the background color is not showing
up. I put the
>> background
>> color in that table in the HTML as well as the CSS,
but am not getting
>> any
>> love! On another page I did it is working fine.
Click
>>
http://rebeccakoury.com/spiraltapestry.htm
and you will see it working
>> fine.
>>
>> Is there some small detail that I missed? Any help
is greatly
>> appreciated!!
>>
>
>

Div background color not showing in Internet Explorer 8 and before

My Footer div is not showing the background color (supposed to be black...) in Internet Explorer 8 and earlier. It's assuming the body color instead. Also the border color on top of the 'bubbles' that run across the page is wrong (supposed to be blue)    Is this just because Internet Explorer 8 and earlier did not support div background and border colors yet, or is there a work-around?? Or maybe I did something wrong?
The site is:    www.meridianwaterfiltration.com

martcol wrote:
I don't think that IE8 does rgba.
It should be OK with rgb but not rgba.
Martin
No its doesnt
I'd just use a hexidecimal color - black #000 and blue: #03f (see below)
.footer {
position: relative;
    width: 100%;
    padding-top: 0px;
    padding-right: 0;
    padding-bottom: 0px;
    padding-left: 0;
    background-image: none;
    background-repeat: repeat-x;
    margin-top: 0px;
    clear: both;
    height: 350px;
    background-color: #000;
#bubble {
    background-image: url(Images/water drop 0banner.jpg);
    background-repeat: repeat-x;
    width: 100%;
    height: 43px;
    border-top-width: 3px;
    border-top-style: solid;
    border-top-color: #03F;
    margin: 0px;
    padding: 0px;
    background-color: #3FF;

Cell borders not showing

Could someone please take a look at my site:
www.kameli.com/indexNEW.html
I am trying to make a solid white border around each of the
horizontal navigation buttons. But they are not showing up in
either Firefox or IE. (they show in design mode in DW but not when
I preview or upload my document to the web.) Currently I have it
linked to a stylesheet with the following class for each button:
.nav_btns {
border-color:#FFFFFF;
border-top:thin;
border-right:thin;
border-bottom:thin;
i also tried using style tags, that didn't work either. what
am i doing wrong?

BullocksTroy wrote:
> Could someone please take a look at my site:
>
>
http://www.kameli.com/indexNEW.html
Hi,
You need something like this...
.nav_btns {
border: thin solid #FFFFFF;
HTH
chin chin
Sinclair

Colors not showing up in Photoshop. Worked fine the first day, now when I click on a color it comes out in gray tones. Pop up about RAM storage?

Just downloaded Photoshop and there was a pop up box that mentioned my RAM and something about not enough RAM left for certain 3D features, filters, and image/color graphics(?). I continued. Everything was working fine the first time I went to use it, but the next day I opened the program and could not get any colors to show up. How can I fix this?

Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
Benjamin

Colors not showing up and print doubleing and blurry

Some sites colors do not show as they should,in black and white.Print is superimposed over each other and blurry.I never had this problem till I down loaded firefox 4.

Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
Benjamin

Colors not Showing

Everytime I pick a color , black - white is showing up.
If I pick a light color , the color will show grey
if I pick a dark color , the color will show black
if I pick a lighter color , the color will show white.
Any solutions to fix this problem ?
Screenshots :
sorry if its grey/gray , but I cant edit images because black - white is displaying not the real colors T.T

fixed , I have not set up the mode to RGB color .
I just activated it to image->mode->RGB Color

Dreamweaver and Safari - colors not showing up

I am creating a web site in Dreamweaver, and when I preview it in Safari my background colors do not show up at all. They look fine in Firefox and in mobile device previews. Anyone have any ideas on how to correct this? Thanks!

Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
Benjamin

Why would my spot colors not show up under my separations preview?

I just sent a job back to press that has 2 spot colors. I let the rip do the separations and I got 3 plates. Black and my 2 spot colors. There is no black that I'm aware of in the document but when I previewed it at the rip, it showed stuff on the black plate.
So, back at the computer, I checked my elements and they look like they are colored correctly so I was going to do a separations preview in ID. Neither of my spot colors are showing up in there. Any thoughts?
IDCS2

Perhaps add the swatch icon to the sep preview, and use a combo icon, the process sq with the spot circle in the middle. But the swatch would out of necessity be unselectable and grayed, so perhaps that would be sufficent. And then there would be the problem of using with more than 10 spots (not unusual for me, BTW), when the preview would be all grayed.
It would be a great idea to have the indication.
Rats, if I hadn't had such a busy day I could of nipped Bob on this one, which I had figured before I finished the first post (six hours late!). I do a of of packaging with eight spots (we're going to start using a ten unit press soon, that should be fun), and perhaps it helped that I use the ink manager frequently just for this, because a job with eight printing spots could also have another three or four spots related to substrate and construction details, so I keep those converted to process until it's time to send off the printer's file.
Yours
Vern

Code to change JTable cell color not working

My code below is supposed to change the color
of a single JTable cell however its not working.
Could anyone please tell me why?
Here's the code:
import java.awt.*;
import javax.swing.table.*;
import javax.swing.*;
import java.awt.event.*;
public class ColorTable extends JTable {
public ColorTable() {
AbstractTableModel tableModel = new AbstractTableModel() {
public Class getColumnClass(int column) { return Integer.class; }
public int getColumnCount() { return 6; }
public int getRowCount() { return 10;}
public Object getValueAt(int row,int col) { return new Integer(row * col); }
setModel(tableModel);
setDefaultRenderer(Integer.class,new ColorRenderer(Color.cyan));
this.setRowSelectionAllowed(false);
this.setCellSelectionEnabled(true);
addMouseListener(new MouseAdapter() {
private ColorRenderer renderer;
private JColorChooser chooser = new JColorChooser();
public void mousePressed(MouseEvent e) {
if(e.getModifiers() == MouseEvent.BUTTON3_MASK) {
System.out.print("rowAtPoint(e.getPoint())=" +rowAtPoint(e.getPoint()));
System.out.print( "columnAtPoint(e.getPoint()))=" + columnAtPoint(e.getPoint()));
renderer = (ColorRenderer)getCellRenderer(rowAtPoint(e.getPoint()), columnAtPoint(e.getPoint()));
// chooser.setColor(renderer.getColor());
renderer.setColor(chooser.showDialog((Component)e.getSource(),"Choose Cell Color",chooser.getColor()));
class ColorRenderer extends DefaultTableCellRenderer {
private Color cellColor;
public ColorRenderer(Color color) { cellColor = color; }
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
System.out.print("row= " + row + "\n");
System.out.print("column= " + column + "\n");
System.out.print("OBJECT VALUE=" + value.toString());
//Component comp = super.getTableCellRendererComponent(table,value,isSelected,hasFocus,row,column);
super.getTableCellRendererComponent(table,value,isSelected,hasFocus,row,column);
if (isSelected) {
setOpaque(true);
setBackground(cellColor);
else {
setBackground(Color.white);
setForeground(Color.black);
return this;
public void setColor(Color color)
cellColor = color;
ColorTable.this.repaint();
public Color getColor() { return cellColor; }
public static void main(String[] args) {
JFrame frame = new JFrame();
JPanel panel = new JPanel();
ColorTable table = new ColorTable();
panel.add(table);
frame.getContentPane().add(panel);
frame.setSize(500,250);
frame.setVisible(true);

My code below is supposed to change the color
of a single JTable cell however its not working.
Could anyone please tell me why?
Here's the code:
import java.awt.*;
import javax.swing.table.*;
import javax.swing.*;
import java.awt.event.*;
public class ColorTable extends JTable {
public ColorTable() {
AbstractTableModel tableModel = new AbstractTableModel() {
public Class getColumnClass(int column) { return Integer.class; }
public int getColumnCount() { return 6; }
public int getRowCount() { return 10;}
public Object getValueAt(int row,int col) { return new Integer(row * col); }
setModel(tableModel);
setDefaultRenderer(Integer.class,new ColorRenderer(Color.cyan));
this.setRowSelectionAllowed(false);
this.setCellSelectionEnabled(true);
addMouseListener(new MouseAdapter() {
private ColorRenderer renderer;
private JColorChooser chooser = new JColorChooser();
public void mousePressed(MouseEvent e) {
if(e.getModifiers() == MouseEvent.BUTTON3_MASK) {
System.out.print("rowAtPoint(e.getPoint())=" +rowAtPoint(e.getPoint()));
System.out.print( "columnAtPoint(e.getPoint()))=" + columnAtPoint(e.getPoint()));
renderer = (ColorRenderer)getCellRenderer(rowAtPoint(e.getPoint()), columnAtPoint(e.getPoint()));
// chooser.setColor(renderer.getColor());
renderer.setColor(chooser.showDialog((Component)e.getSource(),"Choose Cell Color",chooser.getColor()));
class ColorRenderer extends DefaultTableCellRenderer {
private Color cellColor;
public ColorRenderer(Color color) { cellColor = color; }
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
System.out.print("row= " + row + "\n");
System.out.print("column= " + column + "\n");
System.out.print("OBJECT VALUE=" + value.toString());
//Component comp = super.getTableCellRendererComponent(table,value,isSelected,hasFocus,row,column);
super.getTableCellRendererComponent(table,value,isSelected,hasFocus,row,column);
if (isSelected) {
setOpaque(true);
setBackground(cellColor);
else {
setBackground(Color.white);
setForeground(Color.black);
return this;
public void setColor(Color color)
cellColor = color;
ColorTable.this.repaint();
public Color getColor() { return cellColor; }
public static void main(String[] args) {
JFrame frame = new JFrame();
JPanel panel = new JPanel();
ColorTable table = new ColorTable();
panel.add(table);
frame.getContentPane().add(panel);
frame.setSize(500,250);
frame.setVisible(true);

Problem with PDF viewing Colors not showing correctly (or black and white)

My iMac and my Macbook are both not showing the pictures in a PDF correctly. My collegue who uses a Macbook has no issues.
Im using version 10.7.5 on my macs.
I have tried using the standard ' Preview' as wel as two different free PDF vieuwers from the Appstore.
Also the sender of the document has no issues as wel with the PDF document she made with Indesign.
I'm sure it has to do with my computers, but where do I have to look?
Thanks for helping.
Anything that might be helpfull.

Since InDesign documents are truly PDF compliant I would, were I you, use a truly PDF compliant viewer - Adobe Reader.
To learn how Preview can really screw up a PDF document (and this is just a simple form) see -> http://khkonsulting.com/2013/06/preview-app-killer-of-pdf-files/.
Clinton

WYSIWYG Color not showing in PDF

Output Designer 5.6
Hi , I have two color shaded boxes on my form - a yellow -and- a light blue. When I output to PDF these show as grey :( .
However to test if color is working I included some Blue text in Arial to the form and this prints as Blue ! on the PDF .
What is the secret for color shaded boxes to also appear on PDF?
Thanks in Advance.

I got it to show in color , though looks like it works when you use a solid background and not a mesh.

"background color not showing"

Hi all,
I am back with a new problem..hope u guys will help me out..
I have a very basic prgm where i am trying out the GUI things..
here is my code:import java.lang.* ;
import java.awt.* ;
import java.awt.event.*;
import javax.swing.* ;
class SecTest {
public static void main(String args[])
JFrame MyFrame = new JFrame("MyFrame");
MyFrame.setBackground(Color.pink);
// MyFrame.show();//if i put it only here..it doesnt show me the string
MyFrame.setBounds(100,100,400,400);
MyFrame.addWindowListener(new WindowAdapter()
    public void windowClosing(WindowEvent e)
      System.exit(0);
Toolkit MyTk = Toolkit.getDefaultToolkit();
Image MyImg = MyTk.getImage("not.gif"); // not.gif is in my current directory
MyFrame.setIconImage(MyImg);
Container MyContentPane = MyFrame.getContentPane();
JPanel MyPanel = new JPanel();
MyContentPane.add(MyPanel);
MyContentPane.add(new NewPanel());
MyFrame.show();
// but then if i have .show() at both places..i just get a flash of pink background and again the usual gray one..
class NewPanel extends JPanel {
public void paintComponent(Graphics g)
super.paintComponent(g);
Font f = new Font("SansSerif", Font.BOLD+Font.ITALIC, 20);
g.setFont(f);
g.setColor(new Color(0,128,124));
g.drawString("Hello There..This is my first GUI program",50,50);
};Thanks & Regards,

You want to set the JPanel color pink so it shows, because that's the topmost layer, not the frames. And the reason why if you add show() up there your String doesn't appear, is because you haven't created the JPanel that display that yet. You need to use show() after you've created all your components so they appear. Here's the modified code:
import java.lang.* ;
import java.awt.* ;
import java.awt.event.*;
import javax.swing.* ;
class SecTest {
public static void main(String args[])
JFrame MyFrame = new JFrame("MyFrame");
//MyFrame.setBackground(Color.pink);
// MyFrame.show();//if i put it only here..it doesnt show me the string
MyFrame.setBounds(100,100,400,400);
MyFrame.addWindowListener(new WindowAdapter()
    public void windowClosing(WindowEvent e)
      System.exit(0);
Toolkit MyTk = Toolkit.getDefaultToolkit();
Image MyImg = MyTk.getImage("not.gif"); // not.gif is in my current directory
MyFrame.setIconImage(MyImg);
Container MyContentPane = MyFrame.getContentPane();
JPanel MyPanel = new JPanel();
MyContentPane.add(MyPanel);
MyContentPane.add(new NewPanel());
MyFrame.show();
MyFrame.show();
// but then if i have .show() at both places..i just get a flash of pink background and again the usual gray one..
class NewPanel extends JPanel {
public void paintComponent(Graphics g)
super.paintComponent(g);
setBackground(Color.pink);
Font f = new Font("SansSerif", Font.BOLD+Font.ITALIC, 20);
g.setFont(f);
g.setColor(new Color(0,128,124));
g.drawString("Hello There..This is my first GUI program",50,50);
};

Cell colors not showing up

Similar Messages

Maybe you are looking for