Cell Info Display Problem

Past 2 days , my Nokia N71 cell info display gets stuck only showing one area or doesn't show at all, even though moving to another area doesn't change. To update cell info display i need to restart my phone or i need to go settings then i select cell info display then change to off then again on. But i have also Nokia 5700 XM but it doesn't face the same problem and it is also subscribed to same network as n71.
my N71 fimware is V 2.0642.1.05
Please someone give the solution to the problem.
Best Regards

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

Similar Messages

Nokia X1-01 Cell Info Display Problem

My X1-01 sw version 05.27 ,26-05-11,RM -713, Language: MG
The problem is that it does not display Cell Info display correctly. Only few times it shows, But only for sometime. Is this bug fixed in the latest version 5.44 ???? and it also has the signal problem .. If i put it in my pocket , the whole signal goes away in both sims....

Hi Yogeshwar,
The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

Cell info display on Nokia 701

Hi every body, My Nokia 701 is not displaying cell info i.e name of area or name of tower covering my phone even though I set info display to on in pull down notification menu right from time of purchase. Is this problem specific to my phone. My old phone Nokia X3-00 was showing cell info with 2G sim. Now I am having 3G sim inserted into my phone 701. But cell info display is off either with 2G or 3G coverage.

I jsut checked it on my c3 00 with vodafone and it started showing some special offers on home screen.
But I tried the same on my 701 with aircel and it doesn't show any of that.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Using Cell Info Display in MIDlets

How can I access the " Cell Info Display " provided by GSM service provider from our MIDlets to get some location idea from Nokia Series 40 or 60 Mobile Handsets ?
Without using Locational API's, is their any Native mathods aceesable for this, provided by any Nokia ?

Well, that's a very popular question.
What i have found until today is summarized below.
1-) No, there are no methods for getting Cell ID or Local Area Network. Most provider's don't provide it (intentionally). Some Motorola phones accept a call like System.getProperty("phone.cid") or System.getProperty("Siemens.CID")
2-) I suggest you use C++ if your phone supports symbian. There is not a standar way, but using etelcom Apis you can get the Network information.
Look for more details on official nokia forums.
3-) Good luck, and tell me if you could manage to finish your app.

Cell Info Display option in iPhone

Hi, I am using iPhone 5. I need to know that 'do we have an option to Display Cell Info like we do have in Nokia handsets'. This will display the real time tower location info on the screen. This information should be displayed everytime handsoff occurs and this should work without opening any external installed app. Thanks.

09-Sep-2008 04:21 AM
engshiraj wrote:
Thank you it_is_me!
What you had written is correct, when selected GSM only it displays the cell info.
However, in Sri Lanka, where I live, the operators are using GSM and UMTS in a complementary fashion that when you put on to dual mode the coverage is high.
I am subscribing to two operators, Dialog and Mobitel. In the Dialog network even if you put to dual mode it displays the cell info. This happenedwith Mobitel network only.
Anyway, thank you very much for the information.
You are welcome , also bear in mind that cell info display that can be activated in E71 is not only 3G , it's 3.5G and this could make difference when it comes to network services .
citation needed .

Cell Info Display

Hey. I have an n8. When i turn on the cell info display. Where does it display?

Normally it is displayed at the place where your active Profile is displayed ...
Not sure where are you located..but here in India the Cell Info Displaye just comes on only when the screen is activated from the standby mode..and it remains hardly for a second..then it displays the active Profile..

Cell Broadcast / Cell Info Display is not static i...

Good Afternoon,
I come by this means can try to explain how a situation that saw the Nokias 6210 Navigator.
A customer information to activate the cell and the cell to receive the information by the same operator appears next to the hours over the name of the profile but is not static, or appears and disappears immediately.
In other Nokias I have checked the information of the cell is always static display of the phone does not disappear. I wonder how can get this information to Nokia to the next versions of firmware updates to correct this situation, there are customers who use certain services of the operators such as the case of TMN TMN that has regional and customer needs to see what indicative of the area where you are and thus becomes complicated because you do not see the same information by not being static.
Can perform this experiment with a Nokia 6210 Navigator and a Nokia E65 or 6630 and others in which information is fixed.
It was with considerable difficulties in Spain which could capture information of the cell with Nokia 6210 Navigator, and therefore opted to take pictures with a nokia 6630 and N-Gage.
No other matter of time, support me with high esteem and consideration
Carefully
Examples:
Nokia 6630
Nokia 6210 Navigator
Message Edited by rsaraiva on 23-May-2009 03:51 PM

If it helps, it may be whether operators actually support it, as my nokia x6 from vodafone use to display it but as soon as I unlocked it and siwtched to T Mobile it's stopped. I have now just switched it onto gsm connection only and it doesn't work so it could well be operator support dependent

N 73 ME - cell information display

Dear Sirs
I have N73 ME for two days and I am very satisfied with it.
The product code is 0544952 and I have updated fw from this site to the official version(V 4.0796.3.2.1.).
I have problem with "cell info display" because it is turned on in settings (tools-settings-phone-network) but I can never see that information on display.
Is this "normal" or something else I have to do to obtain this?
Please advice what to do.
With best regards,
Bane

Hi Bane
Go to menu, tools, settings, network, network mode.
Dual mode: phone switches seamlesly between 3G/2G networks as per the availability in your location.
UMTS: Phone only operates in 3G mode. ie if you fall out of 3G coverage the phone will have no signal at all, not even froma 2G beacon.
GSM: Phone shuts down 3G completely and goes into a power saving 2G mode where signal will only be received in a 2G network environment. AS all cell towers started on the technology for 2G, you should never lose signal, have increased battery life, be able to view MCN and arguably better call quality.
Of course the latter would be your choice!
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Nokia 5530 Cell Info - How to enable?

I travel alot and I rely on Cell info to know the place where I am at that moment using my old Nokia phone(6021).
In my new Nokia 5530, I do not see any where to set the Cell Info.
Is it that I am looking at a different place or is there any other utility that gives the Cell Info?
FYI I have not enabled GPRS because I don't require it. I only want the Cell info.

Can't offer any advice on this because I have never tried it. As far as I am concerned Cell Info Display flashes on and off from time to time. For what it is worth, I don't think you can.

Location String Cell info message

Hi all,
i want to get location string cell info display message from j2me application.. Can anybody help?
Umer
http://www.umerrasheed.com/

Umer wrote:
location string cell info display messageWhat would that be? Anyway, whatever it is, you probably won't be able to get it from J2me, and definateny not if you want to have it working on any j2me device.

Mouse Over Info displays immediately at Finder, Mail, Cyberduck etc.

Hi, I have a new Problem with my Mac -
At Finder, Mail, Cyberduck the yellow Info displays by Mouse Over displays immediately while using the Cursor.
Normaly the Infos about a Folder or File appear a few seconds after the mouse is still on it - but in my case it appearing directly.
Can somebody help ?
THX
Henning

Hi
since it's several apps - try the tip at http://hints.macworld.com/article.php?story=20061107125819464 or at least a
defaults read -g NSInitialToolTipDelay
to see if that's the cause
Is a New User Account the same ?

Display problem after RAM Upgrade to MS6712

Hi there,
after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

OK, here's the info on my PSU;
It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

No "purchased by" or "account name" in Get Info display

The first song I purchased from the iTunes
store works fine. When I use "Get Info" to
see the details there appears to be corrent
information for the "Purchased By" and "Account
Name" fields.
Every other song I have purchased since then
does not display anything for "Purchased By"
or "Account Name" in the "Get Info" display.
The header appears to be missing or corrupt
in all of these files. None of them will play
when I click them and press play, I get no
error or sign in prompt, nothing...
I have about had it with the lack of response
I'm gotten from my emails to tech. support.
After 3 days I got a message that said I should
look for the files on the hard disk. Its clear
that they did not read my email and they have
not replied since, that was about 3 days ago...

Hi ailurous,
I run repair permissions all the time without first booting from the install disk. It works fine. On the other hand, attempting to Repair Disk without booting from the install disk will not work.
I'm thinking something other than faulty permissions is causing your problems..
That being said, I'd suggest booting off your install disk, running Disk Utility, and selecting First Aid>Repair Disk.
If it says that it couldn't repair the disk, just keep running it until it gives you the Disk Successfully Repaired message.
Let us know if this helps or if you get some error messages.
Bob

Getting cell info via a J2ME application

Hi All,
I want to get the cell info i.e. Location String of the BTS, that gets displayed on the mobile phone. Is there any method by which I can get this information in to my J2ME application.
Regards,
Ashish

Just a guess, as I didn't try it yet. But I'm interested on the subject myself, and I think you need the Location API. Try googling for "j2me location api" or take a look at this:
http://www.lbszone.com/index2.php?option=com_content&do_pdf=1&id=176

Preview app and retina display problem after installing Maverick

Hi everyone, i upgraded to Maverick yesterday and i now have a problem with the software "Preview 7.0". I've got a macbook pro 13" retina.
Before Maverick i could visualise image in high resolution using Preview, and the 100% view was showing the image full quality. Now my Preview software acts like i'm not on retina and i can only visualise my images with the resolution of a standard monitor.
Does it make sense ? Please help !!!

I'm having the same issue with Preview not displaying images at the correct resolution. If you also look at the info in Preview, there are metadata issues showing up. Under "Creator's Contact Info" this is the info displayed.
Creator's Contact Info: , CiAdrCtry, CiAdrExtadr, CiTelWork, CiUrlWork, CiAdrPcode, CiAdrRegion, CiAdrCity, CiEmailWork
Something is broken with the program.
Macbook pro retina 15" (late 2012)

Cell Info Display Problem

Similar Messages

Maybe you are looking for