CER 7.1.1 install - no NTP server option

Trying to install CER 7.1.1.  When I get to the Network Time Protocol Client Configuration window it prompts me to put in an NTP server IP address.  The install never prompts me to configure an NTP server or not.  The install doc says that I should get prompted to choose NTP or not, just like a CUCM install.  Did I do something wrong?  I tried it several times and get the same thing.  I have a Not For Resale disc and this is in a lab.  Is there something special about that disc? I don't want to use NTP but I configured a Win2K3 server to be the NTP server, it's reachable but the install can never connect to it.  Needless to say, I can't finish the install.  Below is what I get.
Network Time Protocol Client Configuration
NTP  Server 1  ---------
NTP Server 2  ---------
NTP  Server 3 ----------
NTP  Server 4 ----------
NTP  Server 5 ----------
There is no option to choose No NTP.  You either  have to put in an NTP server or you can't move on with the  installation.

Thanks for the replies.  I was using an installation guide, below, that shows the option to choose NTP or not on step 18.  Is the document wrong then?  In any case, I tried the hacks for Windows, no go.  I tried Linux NTP {Ubuntu], no go.  Otherwise, I just have a voice gateway and a 3524 that doesn't do NTP server.   Any suggestions on getting Linux to work with CER NTP?  Thanks.
Step 18 On the Network Time Protocol Client Configuration page, you are asked if you want to set up external Network Time Protocol (NTP) servers.
Note Cisco strongly recommends that you use external NTP servers to ensure that the system time is kept accurate.
If you click Yes, the system displays a second Network Time Protocol Client Configuration page. In the fields provided, enter the IP address or hostname of the external NTP servers, then click OK. The Database Access Security Configuration page displays. Skip to Step 19.
If you click No, the Hardware Clock Configuration page appears. Enter the following information:
• Year [yyyy]
• Month [mm]
• Day [dd]
• Hour [hh]
• Minute [mm]
• Second [ss]
When you have finished entering this information, click OK. The Database Access Security Configuration page appears.
http://www.cisco.com/en/US/docs/voice_ip_comm/cer/7_0/english/administration/guide/e911inst.html

Similar Messages

  • Which IP address to give NTP Server IP in CUCM8 Installation?

    Hello Friends,
    I am installing CUCM8.0(3) in the lab in one of the VMs in the VMware ESXi Server, I got struck in giving NTP Server IP address in the Installation.
    Could you please let me know which IP address I should give during installation?
    I have CUCM71 in the lab , I tried giving this box IP address as NTP but its not supporting.
    If anyone has done this before and know or suggest me, it is very appreciated. Thanks.

    Hi Suryanarayana Chintu,
    You have to install an NTP server on a saperate box, or use the existining NTP servers in your lab if any and provide this ip address to proceed further as part of this installation.
    Hope it helps.
    Anand
    Please rate helpful posts !!

  • Jdk131 of wls 6.1 sp2 on Solaris 7 doesnt support -server option?

    Greetings
    I installed, wls 6.1 sp2 on Solaris 7.
    But it seems the built in jdk131 that installed doesnt support
    -server option.
    i checked the jdk131/jre/bin folder, but i dont see any client, server folders...how
    is this possible?
    how to correct this?

    Yes i tried that, but it says, incorrect option, JVM could not be created.
    any was i cd identify is the install binary was correct?
    like any indication in jdk131/jre/bin folder?
    Kumar Allamraju <[email protected]> wrote:
    i think it does.
    Have you tried to start with java -server weblogic.Server?
    Are you getting any errors?
    Kumar
    vinay wrote:
    Greetings
    I installed, wls 6.1 sp2 on Solaris 7.
    But it seems the built in jdk131 that installed doesnt support
    -server option.
    i checked the jdk131/jre/bin folder, but i dont see any client, serverfolders...how
    is this possible?
    how to correct this?

  • Lms install without dns server and NTP

    I know it sounds weird but ATM the deployment does not include this two cause the network is meant to be totally closed
    and ntp server will be implemented soon
    is there a way to ovecome this?
    how to set time in appliance bios? UTC? localtime?
    domain? (localdomain)?
    dns? (127.0.0.1)?
    thank you in advance

    It can talk NTP and DNS to any device on the network supporting the protocol.
    LMS talks NTP but takes the time from anyone. It doesn't verify the stratum. Any switch/router talking NTP will do.
    You could even run a DNS service on the server it self.
    Cheers,
    Michel

  • How can i check the license file installed on the server CCM 6.1.4

    Hi;
    i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
    how can i check the license file installed on this server???
    thanks.

    Hi Matthew,
    I think your idea should work just fine, but you will need to work with;
    [email protected]
    To put together the proper license file due to this change called the "License MAC"
    Customer Impact from New Licensing Procedures
    Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
    Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
    •Time zone
    •NTP server 1 (or "none")
    •NIC speed (or "auto")
    •Hostname
    •IP Address (or "dhcp")
    •IP Mask (or "dhcp")
    •Gateway Address (or "dhcp")
    •Primary DNS (or "dhcp")
    •SMTP server (or "none")
    •Certificate Information (Organization, Unit, Location, State, Country)
    This hash of these fields is called the LICENSE MAC
    Note : Once there is a change in any of the parameters that creates the License MAC, it will
    give you 30 day grace period to generate a new license file for the CM based on new license
    MAC.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
    Cheers!
    Rob

  • NTP Server IP Address ?

    Hi,
    I have configured a Cisco 6509 core switch as a NTP master and allowed all my access switches to get their time synchronised with the core switch. Now, I want to configure the core switch to get itself synchronised with other public NTP server which would be reliable and genuine as our organisation is serving for healthcare. One of my friend has told me to use these IPs 128.249.1.1 or 128.2.136.71 as a NTP Server in the core switch. Should I use them?
    Is Cisco recommends any Public IP for  NTP Server synchronisation? Please suggest.
    Thanks & Regards,
    Anil K. 

    Disclaimer: I have no affiliation with Cisco in any way except where I work, we use some Cisco products (sw/hw). So take it however you will.
    Personally, I would rather adopt the following approach suggested at http://www.pool.ntp.org/en/use.html, than hardcoding a couple of public NTP servers in a remote region:
    "As pool.ntp.org will assign you timeservers from all over the world, time quality will not be ideal. You get a bit better result if you use the continental zones (For example europe, north-america, oceania or asia.pool.ntp.org), and even better time if you use the country zone (like ch.pool.ntp.org in Switzerland) - for all these zones, you can again use the 0, 1 or 2 prefixes, like 0.ch.pool.ntp.org. Note, however, that the country zone might not exist for your country, or might contain only one or two timeservers. If you know timeservers that are really close to you (measured by network distance, with traceroute or ping), time probably will be even better. "
    Of course, if time sync is REALLY that important, one might consider buying/installing commercial GPS-based NTP appliances. That's not what you're looking for, obviously.

  • NTP Server: receive: aspiring active peer not authenticated

    Hello
    I had Solaris 9 running on our office server which was also the NTP server. Now I installed Solaris 10 and copied over the backup of the files ntp.conf, ntp.keys, ntp.client and ntp.server.
    The NTP server is running OK but every 6 mins I get this message in /var/adm/messages:
    Aug 13 11:36:38 bhsbsc001 xntpd[7221]: [ID 816908 daemon.warning] receive: aspiring active peer not authenticated
    Could you please help and point in the right direction what is going wrong.
    Many Thanks
    pioneer

    First, I appreciate this infomation. The same things happened to me.
    However, I still have basic questions.
    Why did this happen?
    Same configurations on both 8 and 10, warnings showed up on Solaris 10 and nothing happend on Solaris8.
    I know there are many differences between those, such as OS version, xntp version and more.
    but still not clear to me....

  • How to diagnose NTP server problem during boot-up?

    We're having a problem on our campus network where Macs aren't able to use the time.apple.com NTP server to correct the time during boot-up. Once the user logs in, open the Date & Time pref pane causes the time to be corrected.
    I've noticed this problem for quite a while but it's really been just a minor inconvenience. Then some users started using Boot Camp and it became a bigger inconvenience because their Mac time is wrong by 4 hours when they return to OS X from Windows XP. It has now become something that we need to address because we have set up a lab with iMacs all configured with Boot Camp and set up to authenticate off of our Active Directory server, which requires that the time be correct on the iMacs when the user tries to log in.
    We'd like to monitor the network traffic on Mac during boot-up to see if we can figure out why this is happening. My person theory is that something that the network admins have the network configured to do when it first sees a new computer is causing enough of a delay in the DHCP process that the Mac doesn't have a network connection when the NTP server call would normally be made. The college has a DSL line that is not part of our network and NTP server time correction works correctly on it.
    We're looking for the best way to capture the activity on the Mac and the network traffic at boot-up. Here are the things that we're looking into.
    1) Verbose mode - Interesting looking but it goes by pretty quickly and I don't have time to read all of that info. Is this recorded in a log automatically somewhere or is there a way to capture this info?
    2) Single user mode - I haven't been able to determine whether the NTP server call should have occurred by the time I get a prompt in Single User Mode. If so, is there a command I could use here that would give me a dump of activity and network traffic up to this point?
    3) I have Interarchy which will let me record network traffic but as far as I can tell there's isn't a way to use this feature during boot-up. Am I wrong about that?
    4) Someone suggested using Ethereal which appears to require Fink when installed. I can't tell if this will work during boot for if it's an app that I can only run after logging in (like Interarchy). Does anyone know how this works?
    Any suggestions would be welcomed.
    -McD-

    Turns out it was a network timing issue. The DHCP server wasn't providing the IP address quick enough (never figured out why, though).

  • NTP Server Setting

    Hi,
    I have ASA 5520 installed.
    I want to use ntp server for firewall clock setting.
    I found one open-access ntp server (stratum 2) in Los Angeles:
    dmz0.la-archdiocese.net
    209.151.225.100
    Can I use the following command to set ntp server?
    ntp server 209.151.225.100 source outside

    Hello John,
    Not sure, I do not have that information on the top of my head,
    Maybe you can run a quick debug on your ASA and provide us the answer
    regards

  • Cisco 2821 Router as a NTP Server

    We are using a 2821 Router as our boundary router.  It has installed into it a 9 port HWIC for layer 2 switching as well as allowing the router to communicate on the Network Management VLAN.  All of the devices on the Network Management VLAN are segregated from the managed traffic, which unfortunately also doesn't allow them external NTP services.  Can the router be programmed as a NTP server so that all of the network appliances can utilize it for NTP from either it's NM Vlan IP address or from a loopback address?  Thanks in advance for the help.

    What are the commands needed in the router for it to provide time to other appliances?
    If your router has successfully synchronized with an authoritative NTP server?  NOT A THING.
    In my network, only the site's distribution switch is allowed to go out and get NTP.  All other access switch goes to the distribution switch by using the command "ntp server ".  You can have multiple NTP server IP address and if you prefer to have a "favorite" you can append your command with the "prefer" option:  ntp server prefer.
    If you have clients then point their NTP to your router.  For troubleshooting, I prefer the command "sh ntp associate".  If your NTP server IP address starts with a "*" this is good and means that your NTP is synchronized.
    Hope this answers your question.

  • Elm. Change ntp server.

    Hi.
    I have elm and cucm installed on the save virtual host. I want change ntp server address on that host. Do it need to generate net license after tha or not ?

    Hi ,
    No.
    In case of VMWARE, use 8 to 9 parameters to generate a license MAC. Even if you change any one of the parameters, such as NTP Address or the Time Zone, the license MAC will change. Then, you need to procure new licenses. However, with this Enterprise License Manager in place, even if you made those changes you do not have to worry about the licenses. There is a product instance that has already been added to the ELM. Even if you make any changes, it will grab the required license from ELM.
    you can also refer the link
    https://supportforums.cisco.com/docs/DOC-27483
    regds,
    aman

  • Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

    Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
    bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
    bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
    bash-3.00$ ./irca.sh
    Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
    (c) Copyright 2006 Oracle Corporation. All rights reserved.
    ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
    Please verify that the ORACLE_HOME is set correctly.
    bash-3.00$

    Hi Craig,
    Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
    So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
    Section :- Oracle Application Server 10g Release 3 (10.1.3)
    Regards,
    Praaksh.

  • How to install Oracle VM Server 2.2.0 as 32-bit mode on a 64-bit machine.

    Gurus,
    If I am not wrong, the Oracle VM Server 2.2.0 installer for 32-bit and 64-bit are the same file.
    I have AMD 64 bit machine, when I install Oracle VM Server 2.2.0, it installs as 64-bit.
    However due to requirement, I want to install Oracle VM Server in 32-bit mode.
    Will appreciate the steps.
    Regards,
    Krishna

    Krishna,
    Please note that the zip file from the Oracle eDelivery/Linux site contains a single Oracle VM server ISO file; this file is used for both x86 and x86-64 hardware. The Oracle VM server install routine automatically detects the hardware platform and installs the appropriate 32-bit or 64-bit Xen hypervisor. Regardless of the hardware platform, 32-bit or 64-bit, dom0 is 32-bit. Will a 32bit dom0 meet your business requirements?
    Could you please let us know the business requirements re 32bit?
    For details about the installation, sizing and server resource requirements please review http://itnewscast.com/chapter-4-oracle-vm-server-sizing-installation-and-updates
    Respectfully,
    Roddy

  • How to install Small Business Server 2008 in an existing Active Directory domain

    It is shown on this page:
    http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
    Is it possible to do this with SBS2008 ?
    If "YES", are there any published information about the procedure ?

    Yes, it is. Thank you very much.
    But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
    But it is written in the shown article:
    ... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
    Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ?

  • Cannot revert to Windows 8 after installing Hyper-V Server 2012 R2

    I own a laptop with a pre-installed Windows 8. I've installed Hyper-V Server 2012 R2 on top of it by mistake, and now I would like to get rid of it and revert it back to Windows 8. I've tried doing so by a backup USB, though it doesn't seem to work. Is there
    anyway to do this without having to use a disc? I haven't received one when I bought it.
    Thanks for any help in advance.

    Found something for specific computer. Find similat info for your computer:
    Acer Recovery Instructions:
    1) Power on the machine
    2) At the ACER BIOS screen, press and hold the 'Alt' key and the 'F10' key simultaneously to start Acer eRecovery.
    3) Once eRecovery utility is displayed, click 'Restore to Factory Default Settings'.
    4) Click 'OK' to continue
    5) The recovery process restore a fully functional factory image of Windows.
    6) After eRecovery has completed, press 'OK' to reboot the computer.
    Acer Recovery Media Purchase Program:
    https://secure.tx.acer.com/RCDB/Main.aspx?brand=acer
    This site is used for purchasing recovery media for your Acer product. 
    To get started, please enter the serial number or SNID located on your Acer product and click "Next"
    System Information
    Get your system information:
    http://secure3.tx.acer.com/FindSystem/FindSystem.aspx?title=Information%20About%20Your%20System
    Acer Main Support page:
    http://www.acersupport.com/
    Regards
    Milos

Maybe you are looking for