Cfdirectory thinks directory is a file

I have a utility that allows the user to select a top-level directory, then displays a list of files in the directory as hyperlinks. Any subdirectories are displayed separately and the hyperlink changes the default directory to that subdirectory where the process is repeated. It basically works using <cfdirectory> and using the "type" column in the results to distinguish between files and directories. It works fine in development but when I moved it to a staging location on the same server my top-level subdirectory gets treated as a file rather than a directory. I dumped the cfdirectoy query and sure enough the Type for that directory is "File". Very curious because this directory structure parallels the one on dev which correctly shows the subdirectory with Type = "Dir". The directories are identical with regard to permissions and also the contents are the same (the top-level subdirectory in each case contains two other subdirectories). OS is Linux.
This is my cfdirectory tag:
<cfdirectory directory="#ExpandPath('.')#/#strDirectory#" name="qFiles" sort="type desc,name">
where strDirectory is initially set to the top-level directory selected by the user.
This has me stumped - any ideas?

Thanks for the suggestions. The directory structure is pretty much as you described, but the top-level directories (Folder A) are hard-coded as only certain ones are used by this app. And since I can't drill down into Folder B (as it isn't recognized as a directory) the lower ones (C & D) never show up at all. But I did run some tests and as I expected a cfdirectory of the root shows Folder A correctly as type "Dir" while a cfdirectory of Folder B shows no results at all. I also verified that DirectoryExists() correctly returns "YES" for Folder B on dev but returns "NO" on the site with the problem.
I think my next step is to remove and recreate the directory and replace all the contents. Even if that solves the problem it's kind of scary if I don't know the cause as I won't have the luxury of recreating the directory once it goes into production.

Similar Messages

I have no directory "C:\Program Files (x86)\MSBuild\12.0\bin"

I installed and few times reinstalled Visual Studio 2013 Community Update 4 from ISO and web installer, SHA-1 is correct. However every time installation process didn't create this directory (also its subdirectories and included files):
C:\Program Files (x86)\MSBuild\12.0\bin
In registry I have entries about MSBuild 12.0 including path to mentioned directories (...\bin and ...\bin\_amd64). Also during creation of project I receive errors:
"Unable to read project... The imported project... C:\Program Files (x86)\MSBuild\12.0\bin\Microsoft.Common.targets was not found. Confirm..."
It's understandable, because I have only these files and subdirectories in C:\Program Files (x86)\MSBuild\12.0:
Microsoft.Common.props, Microsoft.VisualStudioVersion.v12.Common.props, Microsoft.Common.Targets (directory and its subdirectory: "ImportAfter" that includes files: Microsoft.VisualStudio.ReleaseManagement.BuildInfo.ImportAfter.Targets, Microsoft.VisualStudio.Silverlight.SDKTools.targets).
I don't have subdirectory: ...\bin and its content.
I tried install Microsoft Build Tools 2013 but without result. Everything I did on Administrator account on Windows 7 x64.
I don't want to reinstall OS, so could anyone send me entire directory: "C:\Program Files (x86)\MSBuild\12.0\bin" (with subdirectories and msbuild.exes (x86, x64))?

Hello starjacker0,
I have a new installed Visual Studio which installed Visual Studio 2013 and I can see the folder you showed. Hence, I think your problem is pending on your installation and I recommend we focus on this installation problem first.(I'm not allowed to send
you these files on the forum.)
Please navigate to your %temp% folder and find the following logs out:
Or you can use http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to OneDrive and share the link for me, I will help you analyze this file. The log can tell us the reason why it cannot create files under
that folder.
If you have collected the logs, please try clear your %temp% folder and restart the MSBuild installation. I suspect VS installer cannot overwrite the %temp% folder which may cause your problem. However, you know, without logs I'm also not sure of the reason.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to install an entire directory structure and files with the LabVIEW installer

I think I may be missing something on how to do this - preserve a file directory structure in the LabVIEW build process.
Is there an easy way to distribute an entire directory structure (multiple directory levels/text files) and have the LabVIEW build process properly preserve and install them? I included a directory in my build specification but it completely flattened the file structure and then so when the installer builds it, the resulting structure in the /data directory is flattened as well. I'd prefer not to go through each file (~100) and setup a specific target location. Is there an easy way to preserve the file structure in the build process/installer process that I am missing (maybe a check box that I didn't see or an option setting somewhere)?
-DC

Hi DC
Sorry for the delay in responding to your question.
You should be able to do this using a 'Source Distribution' as described below:
- Right click on 'Build Specifications' and select 'New' - 'Source Distribution'
- Provide a name
- Add your files to 'Always included' under 'Source Files'
- Under 'Destinations' select 'Preserve disk hierarchy' and ensure that 'Directory' is selected as the 'Destination type'
When building an installer your can then choose to include your source distribution and it will be installed to a location of your choosing.
Hope this helps.
Kind Regards
Chris | Applications Engineer NIUK

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Getting file from directory where class files are

hi i want to load a properties file from the directory where my java program is (the class/jar files)
somebody told me that i could use System.getProperty("user.dir"); but it would only work under windows; under linux it points elsewhere.
how can i determine the directory where my program lies? sounds easy but i failed :(

why to hell put it in the classpath? Because that way you don't have to ask the user where the hell he put the file.
and if i would do so the next question: how can my
program modify the classpath?It can't. And it doesn't need to.
isn't there another way to determine the directory
where the app is started from???If you mean the current, or working, directory, then yes there are several ways to determine that. But that directory need not be where the classes are actually stored. In fact the current directory doesn't even have to be in the classpath.
Now, here's the best way to deal with properties files. (IMHO of course.) Put them in the classpath, in the same directory or jar file as your classes. Then to create a Properties object and load it from your properties file named e.g. "default.properties" you do this:Properties props = new Properties();
props.load(this.getClass().getResourceAsStream("/default.properties"));

Is there a way to open up a directory for static files.

Is there a way to open a specific directory or set of directories up for browsing with WLS 8.1.5 (such as having static .txt,.html files,etc..) without having to deploy some sort of java app to do this.
Basically we need a quick and dirty way to access files sitting on a specific directory on our Web Server machine. Example is there a way to open up just the directory /home/user/files/video for access?
Thanks,
Cash Chitwood

Well in order to host something I can't see you doing it without having to have a web application? So if you do not have a web application you will probably need to do that and deploy the war I guess even if its an empty war. In which case you can set that parameter I posted about earlier to access your folder?
-Jesus

Insert a directory path and file name option

I built a program that runs three tasks when a voltage triggers the data acquisition. I would like now to insert an option/control for two issues: selection of the directory where the data will be saved, and selection of the file name. How can I do this such that after I press 'start' I should be asked which is the directory where I want the data to be saved and then what is the file name?
Another option would be the following: After I press 'Start' I will have a control where I can write or browse for the folder where I want to save the data; then I have another controller where I write the new file name. So in this case I should not be prompted except the case when I am trying to use the same file name.
Where should I con
nect this new subvi in my loop - before the tasksand before the trigger, or after the tasks and before the trigger?
Thank you.

Programming with LabVIEW might be fun but it is quite time consuming�
OK, here is what I want to do.
I have to monitor a machining process. I have to record cutting forces, power consumed, vibrations, and temperature. From each of these sensors I get a voltage as output and I used �Measurement and automation� and NI-DAQmx to program my tasks (I have LabVIEW Express running in Windows XP).
The triggering of DAQ is generated by the input of a 4.5V DC when the CNC program starts; the stop occurs when CNC program ends and the output voltage becomes 0V. I have finished all the connections and now I have to build the vi.
The �small picture� could be described this way:
I want to record the parameters and save them in files that I could process later using specific vi.
The �big picture� would be the following:
I would like to build a stand alone program that will do the following: when I run the program [ i. e. double-click the shortcut (or the file)] a panel should come up in the center of the screen � in this panel I would like to be able to select what process am I going to investigate: grinding, turning, milling, drilling, tapping etc.
Once I selected what process I am going to investigate, the front panel of a vi should come up � In this panel I should be able to select what parameters I am going to record: forces, power, vibrations, and temperature. On the front panel I should be able to see the waveform of the acquired data. A start/stop button and a led green/red for each parameter should show me the status of the acquisition (green is on, red is off). The start/stop button should allow me to �manually� start or stop the program at any time. Additionally, on the front panel I should also have icons with a choice for directory (folder) path, file name, and comments regarding the experiment. The date and time should be recorded in the file that is saved. There should be an option (check box or selection icon) for saving the data in binary or ASCII format.
Similar to any program, the front panel should have a toolbar containing File, Operate and Help options. The File option should contain �Clear graphs�, �Setup DAQ� and �Exit� and the Operate option should contain: Use digital alarm, Use digital trigger, and Write data to disk with the option to be selected or deselected. The main front panel should close when I select File -> Exit.
The File -> Setup DAQ selection should bring up another front panel in which I should be able to see the acquisition control panel (device, channels to get, buffer size, units � English or metric) and the calibration factors (for the tasks, including triggering voltage) including sampling rate.
Well, that�s almost all. I understand I cannot do this all at once. Unfortunately, I have a very close due date in getting the system up and ready. I am hoping that I could get some help setting up a simple program and I could develop the rest step by step later...
Can anybody help me with this program? I have attached a first attempt that would allow automatic triggering and stopping as well as displaying of forces, power and acceleration.
Thank you in advance.
Radu
Attachments:
Acq_Graph_Voltage-Int_Clk-Dig_Start_Ref_TRIAL1.vi ‏201 KB

Source Directory same in FIle to IDOC

Hi Friends
Can we have a same File Name and same Source Directory for 2 different scenarios?
Means in my communication channel i am putting
this
Source Directory : /POS/input/test
File Name: *.DAT
for one let us say ABC file to xyz-iDOC scenario
and same Source directory and same file name for
another scenario say hgf file to uio-iDOC scenario
Will it work or do i have to change the name of the file or something?
Please guide
Thanks

Swarup,
I've some doubts.
>It will definately work provided you have not marked any action such as archive or delete file after processing in sender communication channel.
Ok, I agree to this point. If you give TEST mode then obviously it will work. Provided there is atleast some time gap between these communication channels polling time. For example Channel1 Polling time 60 seconds, Channel2 Polling time 60 seconds. For example if he activate the first channel at 10:00:00 AM, then he need to activate the other channel 10:00:30 AM( hh:mm:ss). But I always need to make sure, re-activating again it's big pain we need to check at what time the first channel is activated based on that u need to re-activate the next.
>If suppose you need to use the file for both scenarios then you could even use the common sender communication channel also.
Is it, are u sure? So u mean the same comm.channel can be assigned to different scenarios also is it? I mean for two diff.O/B Interface you can create two diff.sender agreements with same channele? Can you try this and let me know?
raj.

Dynamic Configuration - Set Directory Path for File Receiver Adapter

Hi Experts,
I have a question regarding the dynamic configuration for the file adapter. Is it possible to set a directory path without a message mapping for the file receiver adapter? the problem is that I want to import a pdf document. this pdf document I want to store in a dynamic directory (depending on the filename). so I have to read the filename out of the dynamic configuration and generate (depending on the filename) a directory for this file. Is that possible without a message mapping? I cannot make a message mapping because the file has the pdf format and should not get changed.
best regards
Christopher Kühn

Hi Gaurav,
I use the ASMA (respectively the filename) for the sender adapter. After the pdf was imported into XI this filename is in the ASMA.
But what then??? How can I get this filename with the help of the variable substitution? and if I have this filename I have to change this filename a bit to generate the name / path of the directory.
Please explain it to me detailled
Thanks and regards
christopher

Setting directory dynamically in File adapter in BPM 11g

Hi,
I am using file adapter in BPM 11g for writing perpose. While configuring, it is required to provide the directory location, which can be either physical path or logical. The location where the new file will be stored/saved is written in a text file. I want to fetch the location from that text file and want to store the new file in that particular location at run time. Please help !!!!

Hi,
You can dynamically set -among others- the outbound directory and outbound file name for a File Adapter. See: http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#CIACICFD. If you need to retrieve the information beforehand from another file, you could use a synchronous read. See: http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#BABDCEBE.
Ronald

Having problems installing firefox error msg says error creating directory c:\programme files (x86)\mozilla firefox\searchplugins

Hi, I have been having problems with Internet Explorer 8 using Windows 7 so wanted to install Firefox but unable to as get a message saying error creating directory c:\programme files (x86)\mozilla firefox\searchplugins

Thank you guig2! Followed your bleepingcomputer.com link above and found the problem was my permissions on C:\Users\Bill\AppData\Local/Temp. It was not "Full Control" for my User or Administrator. Updated the two lines to permit full control for folder, subfolder and files. Ran perfect.

Acrobat Pro "save as" function in the file menu does not show the current directory of the file

I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.

I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ

How to get the path when i select a directory or a file in a JTree

How to get the path when i select a directory or a file in a JTree

import java.lang.*;
import java.io.*;
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.HeadlessException;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.util.Iterator;
* @author Frederic FOURGEOT
* @version 1.0
public class JTreeFolder extends JPanel {
protected DefaultMutableTreeNode racine;
JTree tree;
protected JScrollPane scrollpane;
final static int MAX_LEVEL = 1; // niveau max de descente "direct" dans l'arborescence
* Sous-classe FSNode
* @author Frederic FOURGEOT
* @version 1.0
private class FSNode extends DefaultMutableTreeNode {
File file; // contient le fichier li� au noeud
* Constructeur non visible
private FSNode() {
super();
* Constructeur par initialisation
* @param userObject Object
FSNode(Object userObject) {
super(userObject);
* Constructeur par initialisation
* @param userObject Object
* @param newFile File
FSNode(Object userObject, File newFile) {
super(userObject);
file = newFile;
* Definit le fichier lie au noeud
* @param newFile File
public void setFile(File newFile) {
file = newFile;
* Renvoi le fichier lie au noeud
* @return File
public File getFile() {
return file;
public JTree getJTree(){
     return tree ;
* Constructeur
* @throws HeadlessException
public JTreeFolder() throws HeadlessException {
File[] drive;
tree = new JTree();
// cr�ation du noeud sup�rieur
racine = new DefaultMutableTreeNode("Poste de travail");
// cr�ation d'un noeud pour chaque lecteur
drive = File.listRoots();
for (int i = 0 ; i < drive.length ; i++) {
FSNode node = new FSNode(drive, drive[i]);
addFolder(drive[i], node); // on descend dans l'arborescence du lecteur jusqu'� MAX_LEVEL
racine.add(node);
// Gestion d'evenement sur JTree (on �coute les evenements TreeExpansion)
tree.addTreeExpansionListener(new TreeExpansionListener() {
public void treeExpanded(TreeExpansionEvent e) {
// lorsqu'un noeud est ouvert
// on descend dans l'arborescence du noeud jusqu'� MAX_LEVEL
TreePath path = e.getPath();
FSNode node = (FSNode)path.getLastPathComponent();
addFolder(node);
((DefaultTreeModel)tree.getModel()).reload(node); // on recharche uniquement le noeud
public void treeCollapsed(TreeExpansionEvent e) {
// lorsqu'un noeud est referm�
//RIEN
// alimentation du JTree
DefaultTreeModel model = new DefaultTreeModel(racine);
tree.setModel(model);
     setLayout(null);
// ajout du JTree au formulaire
tree.setBounds(0, 0, 240, 290);
scrollpane = new JScrollPane(tree);
     add(scrollpane);
     scrollpane.setBounds(0, 0, 240, 290);
* Recuperation des sous-elements d'un repertoire
* @param driveOrDir
* @param node
public void addFolder(File driveOrDir, DefaultMutableTreeNode node) {
setCursor(new Cursor(3)); // WAIT_CURSOR est DEPRECATED
addFolder(driveOrDir, node, 0);
setCursor(new Cursor(0)); // DEFAULT_CURSOR est DEPRECATED
* Recuperation des sous-elements d'un repertoire
* (avec niveau pour r�cursivit� et arr�t sur MAX_LEVEL)
* @param driveOrDir File
* @param node DefaultMutableTreeNode
* @param level int
private void addFolder(File driveOrDir, DefaultMutableTreeNode node, int level) {
File[] fileList;
fileList = driveOrDir.listFiles();
if (fileList != null) {
sortFiles(fileList); // on tri les elements
// on ne cherche pas plus loin que le niveau maximal d�finit
if (level > MAX_LEVEL - 1) {return;}
// pour chaque �l�ment
try {
for (int i = 0; i < fileList.length; i++) {
// en fonction du type d'�l�ment
if (fileList[i].isDirectory()) {
// si c'est un r�pertoire on cr�� un nouveau noeud
FSNode dir = new FSNode(fileList[i].getName(), fileList[i]);
node.add(dir);
// on recherche les �l�ments (r�cursivit�)
addFolder(fileList[i], dir, ++level);
if (fileList[i].isFile()) {
// si c'est un fichier on ajoute l'�l�ment au noeud
node.add(new FSNode(fileList[i].getName(), fileList[i]));
catch (NullPointerException e) {
// rien
* Recuperation des sous-elements d'un noeud
* @param node
public void addFolder(FSNode node) {
setCursor(new Cursor(3)); // WAIT_CURSOR est DEPRECATED
for (int i = 0 ; i < node.getChildCount() ; i++) {
addFolder(((FSNode)node.getChildAt(i)).getFile(), (FSNode)node.getChildAt(i));
setCursor(new Cursor(0)); // DEFAULT_CURSOR est DEPRECATED
* Tri une liste de fichier
* @param listFile
public void sortFiles(File[] listFile) {
triRapide(listFile, 0, listFile.length - 1);
* QuickSort : Partition
* @param listFile
* @param deb
* @param fin
* @return
private int partition(File[] listFile, int deb, int fin) {
int compt = deb;
File pivot = listFile[deb];
int i = deb - 1;
int j = fin + 1;
while (true) {
do {
j--;
} while (listFile[j].getName().compareToIgnoreCase(pivot.getName()) > 0);
do {
i++;
} while (listFile[i].getName().compareToIgnoreCase(pivot.getName()) < 0);
if (i < j) {
echanger(listFile, i, j);
} else {
return j;
* Tri rapide : quick sort
* @param listFile
* @param deb
* @param fin
private void triRapide(File[] listFile, int deb, int fin) {
if (deb < fin) {
int positionPivot = partition(listFile, deb, fin);
triRapide(listFile, deb, positionPivot);
triRapide(listFile, positionPivot + 1, fin);
* QuickSort : echanger
* @param listFile
* @param posa
* @param posb
private void echanger(File[] listFile, int posa, int posb) {
File tmpFile = listFile[posa];
listFile[posa] = listFile[posb];
listFile[posb] = tmpFile;

Directory for archiving files with errors

HI ,
My Scenario is file to RFC Asynch.
when ever the PI picks file from the source directory that file need to delete from the path and need to be archived to some other patch.
And if the file has wrong data it need to archive to error archive folder.
For this I used Archive processing in filesender adapter and I also used directory for archiving files with errors(for wrong data files).
Now the files are arching successfully in the given archive folder for successful messages. But the error files (wrong data which are throwing mapping error in MONI) are also archiving in the same archive folder.
But these error files need to archive in error archive folder.
How can I achieve this?
Thanks in Adv..
Vankadoath.

you can use raja's logic ..........in addition in second receiver do a simple mapping UDF to delete the file from the SUCCESS folder. otherwise your file will be archived in both the folder success and errror
see this code.
DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
*File f1 = new File("/usr/sap/XX/"+keyFileName1);*
*boolean success = f1.delete();*
*if (!success){*
*System.out.println("Deletion failed.");*
*System.exit(0);*
*}else{*
*System.out.println("File deleted.");*

Cfdirectory thinks directory is a file

Similar Messages

Maybe you are looking for