__CFServiceControllerBeginPBSLoadForLocalizations timed out [Console Error]

Hi All,
First off, the issue I'm posting here has been posted before:
http://discussions.apple.com/thread.jspa?threadID=2152097&tstart=0
This topic has been closed, but the issue doesn't seem to be solved however...
I'm still seeing numerous messages like the one below in the Console. Something is definately not right, and I suspect it's causing the machine to sound an alert every time I use the command key (command-N, command-W, command-C, etc.).
ApplicationXYZ[###] __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs
Does anyone have an idea what's causing this, and — more importantly — how it can be solved?
Regards,
A.

I, too, am having these messages: {Application} __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs
FWIW, the error message first occurred to me yesterday, when I was about to open a file with Vim (MacVim) from the command line (not saying this error is just related to MacVim by any means). In my experience, the result of the error never seems to interrupt or slow down anything; it just appears (in my case) on the prompt a few seconds after opening a file with vim (in my case aliased to MacVim). Looking at the system.log, I can now also see that there are many other apps/processes who's invoked the same error.
I'd very much like to know if this is a known problem and what possible directions there are to circumvent this. (I've checked if if I have any pasteboard-affecting apps running and the only ones I could think of, would be LaunchBar and Keyboard Maestro, both of which I quit (along with their daemon processes), alas no disappearing of the aforementioned error message.

Similar Messages

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • '500 Connection timed out' Error in Sender SOAP Scenario

    Hi mates,
    I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
    I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
    But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
    <i>500 Connection timed out
    Connection timed out (-5)
    Error: -5
    Version: 6040
    Component: ICM
    Date/Time: Thu Jun 15 17:06:10 2006 
    Module: icxxthr_mt.c
    Line: 2551
    Server: hcidx1_DX1_03
    Detail: Connection to partner timed out after 60s</i>
    My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
    But I get timeout after 60 sec. Whats wrong/missing?
    I highly appreciate your inputs.
    thx in adv
    praveen

    Hey Praveen,
    <i>I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
    But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.</i>
    does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
    Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
    best regards
    Vara
    [PLEASE REWARD FOR POSTING]

  • Error: Read timed out&MESSAGE_NOT_FOUND.

    Hi,
    There's a synchronous scenario (File-File). A connection failure occured during a query from buisness-process (BPM). Since then an error (error message) appears constantly in Runtime Workbench-Component Monitoring-Communication Channels.
    Success
    RRB: entering RequestResponseBean
    Success
    RRB: passing through ...
    Success
    RRB: suspending the transaction
    Success
    RRB: leaving RequestResponseBean
    Success
    Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
    Success
    Trying to put the message into the call queue.
    Success
    Message successfully put into the queue.
    Success
    The message was successfully retrieved from the call queue.
    Success
    The message status set to DLNG.
    Error
    Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out ErrorStack: 
    Error
    Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out.
    Error
    Transmitting the message using connection http://*****:8010/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out.
    Error
    The message status set to FAIL.
    Error
    Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out
    Error
    Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out
    Error
    Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
    File removing and the channel rebooting the channel donu2019t help.
    After rebooting the channel:
    Error
      Received XI System Error. ErrorCode: MESSAGE_NOT_FOUND ErrorText:   ErrorStack: XML message not found
    Error
      Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:.
    Error
      Transmitting the message using connection http://*****:8010/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:.
    Error
      The message status set to FAIL.
    Error
      Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:
    Error
      Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:
    Error
      Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
    Any ideas?

    hi,
    try this,
    go to Message Monitoring in RWB, delete all the messages with status system error and onhold.
    it shd solve your problem
    Regards,
    Sukarna.chirumamilla.

  • Cisco Prime and WLC packet capture error - Request Timed Out

    Hello,
    We have a Cisco Prime installation (2.2.0) and a WLC (Cisco 5508)
    I’ve been trying to test the wireless packet capture function, but have now run into problems, a quick rundown of my actions so far:
    Selected a wireless access point in Prime and clicked ‘Packet Capture’
    Did a packet capture saving to the PI, the capture worked fine
    Could not find any way to delete the packet capture
    Selected a wireless access point in Prime and clicked ‘Packet Capture’
    Did a packet capture saving to an FTP server, the capture worked fine
    The 1st capture had finished (10 minute capture) before testing the second
    The 2nd capture has also finished and saved the files to the FTP server as specified
    Now though I cannot capture from any access point as when I click ‘Packet Capture’ I get the error:
    “Request Timed out. Error in getting data from server.”
    The error is ‘instant’ as in no delay indicating something actually timing out.
    So the 2 problems I have are:
    How do I fix the ‘request timed out’ error above
    How do I delete old packet captures from the PI
    I hope someone can help as I can’t find any info on either of the problems.
    Cheers
    Adrian

    I think I've solved (2) by deleting the files from the FTP directory on the prime box through SSH.
    So I'm now just stuck on the timed out error.

  • Application Server Session timed out (-11) (lack of debug in internal ITS)

    Dear Sirs,
    I get the error message below, when I try to run a IAC through internal ITS. The IAC worked for a while (<30 minutes), and then suddenly this error appeared.
    I can see that this error message has been asked about previously, but then in connection with statefull/stateless BSP applications (e.g "Session timed out thread", on this forum May 31 2005).
    In this thread the solution is apparently to alter the 'rdisp/plugin_auto_logout', is this the case for us as well?
    I have read Error handling using the ICM , but not able to actually beeing able to pinpoint the problme.
    All our other IAC are working it is only a problem with one of them. The problem is still valid even if I log on with different user, and the error is still there now even after two hours. The problem transaction is a altered version of the WSTA, and I am able to get the first screen where I enter the store number. 
    Any tips or suggestions to pinpoint the error?
    +400 Session timed out - please log in again
    Application Server Session timed out (-11)
    Error:     -11
    Version:     6040
    Component:     ICM
    Date/Time:     Thu Apr 27 14:13:56 2006
    Module:     icxxthr_mt.c
    Line:     1719
    Server:     xxXXXt_TXX_XX
    Detail:     Session does not exist+
    In SM21 :
    +Transaction Canceled ITS_P 025 ( 0x2103: Interpreter: The input contains errors. )                                                              
    Documentation for system log message D01 :
    The transaction has been terminated.  This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction.  The actual reason for the termination is indicated by the T200 message and the parameters.                         
    Additional documentation for message ITS_P               025 Template interpretation terminated - internal error &1                        
    No documentation exists for message IT025+                                     
    Best regards,
    Jørgen

    Dear Sirs,
    The error has been solved. It was a matter of an illegal input sendt to the RetailHeaderFunction.
    However, this makes way for another question.
    On the standalone ITS, it was possible to get error messages which indicated where the code contained errors, when it was runned.
    How is it possible to make the internal ITS gives better feedback (errors?), and show where the error is?
    Jørgen

  • OpenMarket sms api gives "Connection timed out: connect"

    Hello All,
    I am new to web applications with sms services.
    I am trying to send sms from my java application to mobile device. But I am getting below error.
    Aug 25, 2010 10:55:58 AM com.eha.sms.ema.EMACMMessageSendProxy init
    INFO: Move to send the receiver initialization.
    Destination address = +**********
    Source addres = +*****
    Sending message to Simplewire...
    REQUEST XML ==
    <?xml version="1.0" ?>
    <request version="3.0" protocol="wmp" type="submit">
         <user agent="Java/SMS/2.9.16"/>
         <account id="******************" password="***************"/>
         <option type="production"/>
         <source ton="0" address="+*****"/>
         <destination ton="0" address="+**********"/>
         <message udhi="false" text="Hello World!"/>
    </request>
    protocol: http
    remote host: ******Some site given to us by open market people that opens on browser**********
    remote port: 8080
    remote file: /wmp
    {main} [10:55:58.722] Conn: added module com.simplewire.http.RetryModule
    {main} [10:55:58.725] Conn: added module com.simplewire.http.AuthorizationModule
    {main} [10:55:58.726] Conn: added module com.simplewire.http.DefaultModule
    {main} [10:55:58.747] Conn: Creating Socket: smsc-01.openmarket.com:8080
    {main} [10:56:19.759] Conn: java.net.ConnectException: Connection timed out: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at java.net.Socket.<init>(Unknown Source)
         at com.simplewire.http.HTTPConnection$_A.run(Unknown Source)
    Message was not sent!
    Error Code: 106
    Error Description: A connection could not be established with the Simplewire network. Connection timed out: connect
    Error Resolution:
    The code I am using is as below.
    private void config()
              Properties properties = new Properties();
              InputStream smscmReceiver = EMACMMessageSendProxy.class.getClassLoader().getResourceAsStream("sms.properties");
              try
                   properties.load(smscmReceiver);
                   System.out.println(properties.getProperty("SMS.SubscriberID").trim());
                   System.out.println(properties.getProperty("SMS.Password").trim());
                   System.out.println(properties.getProperty("SMS.DestinationAddress").trim());
                   System.out.println(properties.getProperty("SMS.SourceAddress").trim());
                   SMS sms = new SMS();
                   // subscriber settings
                   sms.setRemoteHost(" ******Some site given to us by open market people that opens on browser**********");
                   sms.setDebugMode(true);
                   sms.setRemotePort(8080);
                   sms.setSubscriberID(properties.getProperty("SMS.SubscriberID").trim());
                   sms.setSubscriberPassword(properties.getProperty("SMS.Password").trim());
                   // Message Settings
                   sms.setDestinationAddr(properties.getProperty("SMS.DestinationAddress").trim());          // recipient of message
                   sms.setSourceAddr(properties.getProperty("SMS.SourceAddress").trim());               // originator of message
                   sms.setMsgText("Hello World!");
                   System.out.println("Sending message to Simplewire...");
                   // submit message and check results
                   if (sms.submit())
                        System.out.println("Message was sent!");
         System.out.println("Ticket ID: " + sms.getMsgTicketID());
                   else
                        System.out.println("Message was not sent!");
                        System.out.println("Error Code: " + sms.getErrorCode());
                        System.out.println("Error Description: " + sms.getErrorDesc());
                        System.out.println("Error Resolution: " + sms.getErrorResolution() + "\n");
              } catch (IOException e)
              log.error("Load profile sms.properties failed to send Move.", e);
    I am using windows 7 and the required info from the java code is picked up from a property file.
    destination address is a "+" sign followed by cell number of client in US and I am in diff country.
    source code I am using is "+" sign followed by a short code given by client.
    I am also not aware what short codes are for.
    I am also not sure whether I am passing correct parameters.
    I just followed a demo code from the api's sample file. (open market api......swsms-2.9.16 is the jar used.).
    would like to know If destination address can be my cell number.
    The open market people have configured the demo short code for our SMS messaging account.
    This feature will allow us to test our platform to send and receive SMS messages
    while we are waiting for our dedicated short code.
    Mobile Originated messages MUST start with our assigned keyword(s) to be routed to you.
    We have a few keywords but don't know how to use them.
    Please help!
    Thanks in advance.
    Edited by: Vish_1x1 on Aug 24, 2010 11:06 PM

    I had a same problem.
    It was definately URL and SOAP Action Problem.
    Also, I didnt configure the Proxy too.
    Please dont waste more time in looking inot other configs.
    Just give a careful look at Target URL and SOAP Action, again and again.
    Sweta , Please make this question Answerd , it will be useful for other users.
    And Bahvesh Deserves good points..
    Thanks ,
    Deo.

  • Timed Out Server

    Hello,
              I have tried SP5, but I still have some problems and
              questions...........could someone pls answer these, so that I know if
              this is some known problem with the product, or some configuration
              issue, or if anyone has seen some similar problems.........
              Q:
              What does the following property mean, and what should a reasonable
              value be for it :
              --> ISSUE 31575: A new multicast property
              ("weblogic.cluster.multicastSendDelay") which handles
              the buffer overflow properties has been added.
              Q:
              What does the time-out in the ClusterManager represent, and is it some
              default value, or can it be configured ? Also, is it related to the
              Timed Out SErver error that I mention below?
              -->ISSUE 30924: Enhanced timeout in ClusterManager and fixed a problem
              with servers not shutting down.
              Q: What is written below is not clear to me....is it saying that now
              there should be a message of the type : "Creating RemoteMemberInfo for"
              + configdetails ??
              I have applied SP5, and also checked it with the weblogic.Admin utility,
              and no SP4 file is there anymore, but I am still getting the older
              "Joined cluster mycluster at address 224.0.0.1:7001"
              message.............
              -->ISSUE 32054:
              Improved log notification when a server is aware of other servers in the
              cluster. The string looks like: "Creating RemoteMemberInfo for" +
              configdetails. In
              general, when using WebLogic Server 4.0.X through 5.1.X, the message of
              "Joined cluster mycluster at address 224.0.0.1:7001", does not
              necessarily mean
              that there is anyone else in the cluster. In 4.5 you could tell when
              there was really another server in the cluster by the server to server
              RJVM messages when
              each node found the others. But, in 5.1 this became no longer possible.
              This change improves the log notification and solves this problem.
              Q: How does one turn on the debug flag with the IIS plug in ? Is it
              mentioned in the iisproxy.ini file ? I couldn't find anything like this
              in the admin docs for plug-in configuration ........
              -->ISSUE 28929: Added the ability to have Debug flags with
              NSAPI/ISAPI/ASAPI plug-ins. Now Debug flags can be turned on in the
              configuration file of the plug-in.
              PROBLEM:
              When both of the servers in the cluster are brought up, and they start
              receiving requests, the following happens for some time on one server,
              till which time apparently both share the load....
              Mo Aug 22 12:32:39 GMT+02:00 2000:<I> <Cluster> memberPresent
              -68329250512188744
              40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
              Mo Aug 22 12:32:46 GMT+02:00 2000:<I> <Cluster> memberPresent
              -68329250512188744
              40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
              Mo Aug 22 12:32:56 GMT+02:00 2000:<I> <ServletContext-General> file:
              init
              Mo Aug 22 12:33:26 GMT+02:00 2000:<I> <Cluster> Timed out server
              then the other server stops taking any load and all requests go to this
              server............However, if this servlet is brought down, the other
              takes over the load...........
              however, bringing up a new server in the cluster, or reviving the one
              brought down, the following happens :
              weblogic.utils.NestedError: Tried to update secondary, but it thought it
              was the primary - with nested exception:
              [weblogic.cluster.replication.BadStatusException: update found
              -1286423340868561093 but it is not the secondary]
              the member present messages appear again for some time, and then again
              there is the Timed Out Server message.......though all of this happens
              pretty randomly at this stage, but the problem is consistent...........
              If someone has any ideas, pls let me know.........
              environment:
              2 servers in a cluster with NT...........IIS proxy..........
              regards,
              farhat
              

    Hello,
              I have tried SP5, but I still have some problems and
              questions...........could someone pls answer these, so that I know if
              this is some known problem with the product, or some configuration
              issue, or if anyone has seen some similar problems.........
              Q:
              What does the following property mean, and what should a reasonable
              value be for it :
              --> ISSUE 31575: A new multicast property
              ("weblogic.cluster.multicastSendDelay") which handles
              the buffer overflow properties has been added.
              Q:
              What does the time-out in the ClusterManager represent, and is it some
              default value, or can it be configured ? Also, is it related to the
              Timed Out SErver error that I mention below?
              -->ISSUE 30924: Enhanced timeout in ClusterManager and fixed a problem
              with servers not shutting down.
              Q: What is written below is not clear to me....is it saying that now
              there should be a message of the type : "Creating RemoteMemberInfo for"
              + configdetails ??
              I have applied SP5, and also checked it with the weblogic.Admin utility,
              and no SP4 file is there anymore, but I am still getting the older
              "Joined cluster mycluster at address 224.0.0.1:7001"
              message.............
              -->ISSUE 32054:
              Improved log notification when a server is aware of other servers in the
              cluster. The string looks like: "Creating RemoteMemberInfo for" +
              configdetails. In
              general, when using WebLogic Server 4.0.X through 5.1.X, the message of
              "Joined cluster mycluster at address 224.0.0.1:7001", does not
              necessarily mean
              that there is anyone else in the cluster. In 4.5 you could tell when
              there was really another server in the cluster by the server to server
              RJVM messages when
              each node found the others. But, in 5.1 this became no longer possible.
              This change improves the log notification and solves this problem.
              Q: How does one turn on the debug flag with the IIS plug in ? Is it
              mentioned in the iisproxy.ini file ? I couldn't find anything like this
              in the admin docs for plug-in configuration ........
              -->ISSUE 28929: Added the ability to have Debug flags with
              NSAPI/ISAPI/ASAPI plug-ins. Now Debug flags can be turned on in the
              configuration file of the plug-in.
              PROBLEM:
              When both of the servers in the cluster are brought up, and they start
              receiving requests, the following happens for some time on one server,
              till which time apparently both share the load....
              Mo Aug 22 12:32:39 GMT+02:00 2000:<I> <Cluster> memberPresent
              -68329250512188744
              40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
              Mo Aug 22 12:32:46 GMT+02:00 2000:<I> <Cluster> memberPresent
              -68329250512188744
              40S134.28.77.101:[7001,7001,7002,7002,7001,-1]
              Mo Aug 22 12:32:56 GMT+02:00 2000:<I> <ServletContext-General> file:
              init
              Mo Aug 22 12:33:26 GMT+02:00 2000:<I> <Cluster> Timed out server
              then the other server stops taking any load and all requests go to this
              server............However, if this servlet is brought down, the other
              takes over the load...........
              however, bringing up a new server in the cluster, or reviving the one
              brought down, the following happens :
              weblogic.utils.NestedError: Tried to update secondary, but it thought it
              was the primary - with nested exception:
              [weblogic.cluster.replication.BadStatusException: update found
              -1286423340868561093 but it is not the secondary]
              the member present messages appear again for some time, and then again
              there is the Timed Out Server message.......though all of this happens
              pretty randomly at this stage, but the problem is consistent...........
              If someone has any ideas, pls let me know.........
              environment:
              2 servers in a cluster with NT...........IIS proxy..........
              regards,
              farhat
              

  • BPM CE 7.2 Get Timed Out calling RFC

    Hi experts
    I am new in BPM with RFC on CE 7.2
    I have created a simple process with Message Start, Message End and an Automated Activity that executes a RFC, but when I perform this process its get time out, log:
    Dynamic client generated from wsdl. WSDL: http://10.1.5.47:50000/bpm/demosapcom/testes/TesteTrigger3?wsdl. The server response timed out.
    Error details: Read timed out
    I am using WebServices Navigator to perform the process, is there another way to do that ? Performing the process like this I can´t debug it.

    Tks Arafat Farooqui
    I have found the log and now I am looking for the way to solve exception below:
    I also try to configure the Destination on "Application Communication: Configuration" because there is a message "No destination selected" but the buttons "Configure" and "Remove Configuration" are disabled, what should I do to enable these buttons ?
    Could not read the destination from ESB Configuration
    [EXCEPTION]
    com.sap.engine.interfaces.sca.config.exception.ESBConfigurationException: Configuration not found for application: demo.sap.com/testes,composite:testes,component:demo.sap.comtestesBPMcomponent,reference:5658e8ab-607d-4ca9-acc0-dfa8964e40d9,bindingType:RFC
    at com.sap.esi.esp.service.server.ESPServiceInterfaceImpl.getConfiguration(ESPServiceInterfaceImpl.java:357)
    at com.sap.sdo.das.jco.JCoInvoker.accept(JCoInvoker.java:157)
    at com.sap.engine.services.sca.plugins.jco.JCoImplementationInstance.accept(JCoImplementationInstance.java:63)
    at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:335)
    at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:117)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:100)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:174)
    at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:530)
    at com.sap.glx.core.kernel.trigger.config.Script$MethodInvocation.execute(Script.java:245)
    at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:791)
    at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:63)
    at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:138)
    at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:127)
    at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:124)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Subject.java:337)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:121)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:299)
    Caused by: com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException: Configuration not found for application: demo.sap.com/testes,composite:testes,component:demo.sap.comtestesBPMcomponent,reference:5658e8ab-607d-4ca9-acc0-dfa8964e40d9,bindingType:RFC
    at com.sap.esi.esp.service.server.esb.ConnectivityConfigurationManagerImpl.readConfiguration(ConnectivityConfigurationManagerImpl.java:276)
    at com.sap.esi.esp.service.server.ESPServiceInterfaceImpl.getConfiguration(ESPServiceInterfaceImpl.java:350)
    ... 21 more
    Caused by: com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException: Configuration not found for application: demo.sap.com/testes,serviceRefId:testes_demo.sap.comtestesBPMcomponent_5658e8ab-607d-4ca9-acc0-dfa8964e40d9_RFC. Please check the configuration details from the NWA. You may have not assigned the Service Group to a Provider System, or the generation of the configuration has failed.
    at com.sap.esi.esp.service.server.esb.ConnectivityConfigurationManagerImpl.readConfiguration(ConnectivityConfigurationManagerImpl.java:334)
    at com.sap.esi.esp.service.server.esb.ConnectivityConfigurationManagerImpl.readConfiguration(ConnectivityConfigurationManagerImpl.java:263)
    ... 22 more
    Exception during JCo plugin processing 
    [EXCEPTION]
    com.sap.engine.interfaces.sca.spi.PluginException: Could not read the destination from ESB Configuration: com.sap.engine.interfaces.sca.config.exception.ESBConfigurationException: Configuration not found for application: demo.sap.com/testes,composite:testes,component:demo.sap.comtestesBPMcomponent,reference:5658e8ab-607d-4ca9-acc0-dfa8964e40d9,bindingType:RFC
    at com.sap.sdo.das.jco.JCoInvoker.accept(JCoInvoker.java:363)
    at com.sap.engine.services.sca.plugins.jco.JCoImplementationInstance.accept(JCoImplementationInstance.java:63)
    at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:335)
    at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:117)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:100)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:174)
    at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:530)
    at com.sap.glx.core.kernel.trigger.config.Script$MethodInvocation.execute(Script.java:245)
    at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:791)
    at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:63)
    at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:138)
    at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:127)
    at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:124)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Subject.java:337)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:121)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:299)
    Error during SCA Processing 
    [EXCEPTION]
    com.sap.engine.interfaces.sca.spi.PluginException: Could not process message for operation ZNMM001 in JCO plugin module.
    at com.sap.sdo.das.jco.JCoInvoker.accept(JCoInvoker.java:369)
    at com.sap.engine.services.sca.plugins.jco.JCoImplementationInstance.accept(JCoImplementationInstance.java:63)
    at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:335)
    at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:117)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:100)
    at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:174)
    at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:530)
    at com.sap.glx.core.kernel.trigger.config.Script$MethodInvocation.execute(Script.java:245)
    at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:791)
    at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:63)
    at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:138)
    at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:127)
    at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:124)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAs(Subject.java:337)
    at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:121)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:299)
    Edited by: Lehcim on Aug 2, 2010 6:39 PM

  • Services has timed out at the startup

    Hi,
    We are running on SAP XI 3.0 SP 21 Windows 2003 with Oracle 10.2.0.2. The problem is that some of the J2EE services cannot be started, at the startup phase, after respecful offline backup. Please find the error, below;
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.xi.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.file.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.mail.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.cpa.svc has timed out > service com.sap.aii.af.cpa.svc start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.ms.svc has timed out > hard reference to service com.sap.aii.af.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.rfc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.bc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service tc~lm~ctc~cul~service_sda has timed out > service tc~lm~ctc~cul~service_sda start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.ispeak.svc has timed out > hard reference to service com.sap.aii.af.ms.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.jdbc.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service rfcengine has timed out > hard reference to service ejb. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.jms.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.security.service has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service ejb has timed out > service ejb start method invoked. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.adapter.marketplace.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , Service com.sap.aii.af.svc has timed out > hard reference to service com.sap.aii.af.cpa.svc. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:062 , 16 services have timed out. , Error , /System/Server , com.sap.engine.core.service630.container.MemoryContainer ,  ,
    06/13/2010 , 22:09:22:015 , Sun Jun 13 22:09:22 EEST 2010 Thread[Thread-1] initiated a full thread dump due to: Timed out services:
    Service com.sap.aii.af.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.adapter.marketplace.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service ejb > service ejb start method invoked.
    Service com.sap.aii.af.security.service > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.adapter.jms.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service rfcengine > hard reference to service ejb.
    Service com.sap.aii.adapter.jdbc.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.af.ispeak.svc > hard reference to service com.sap.aii.af.ms.svc.
    Service tc~lm~ctc~cul~service_sda > service tc~lm~ctc~cul~service_sda start method invoked.
    Service com.sap.aii.adapter.bc.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.adapter.rfc.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.af.ms.svc > hard reference to service com.sap.aii.af.svc.
    Service com.sap.aii.af.cpa.svc > service com.sap.aii.af.cpa.svc start method invoked.
    Service com.sap.aii.adapter.mail.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.adapter.file.svc > hard reference to service com.sap.aii.af.cpa.svc.
    Service com.sap.aii.adapter.xi.svc > hard reference to service com.sap.aii.af.cpa.svc.
    , Error , /System , com.sap.engine.frame.Environment ,  ,
    06/13/2010 , 22:06:16:453 , deploymentListener registered , Info ,  , com.sap.tc.lm.ctc.cul.j2eeengine.CULServiceFrame ,  ,
    06/13/2010 , 22:06:16:437 , entering CulServiceFrame.start , Info ,  , com.sap.tc.lm.ctc.cul.j2eeengine.CULServiceFrame ,  ,
    06/13/2010 , 22:06:15:890 , Configuration util service started successfully. , Info , /System/Server/CTC , com.sap.tc.lm.ctc.confs.service.ServiceFrame ,  ,
    06/13/2010 , 22:06:14:656 , Starting Configuration util service... , Info , /System/Server/CTC , com.sap.tc.lm.ctc.confs.service.ServiceFrame ,  ,
    Consequently, because of those processes were timed out, XI cannot be started, successfully. As a workaround, I am restarting java servers, manually. So, anyone has a suggestion about this problem?
    Thank you

    Hello Orkun
    Ensure that the MaxThreadCount parameter is set to 350 as per note #937159 XI Adapter Engine is stuck. This will help the overall system performance.        
    Regards
    Mark

  • Connection to partner timed out after 60s

    Hi,
    I have a scenario HTTP to RFC. Where the user posts the data using the URL I have provided to get the response back from SAP system.
    Everything is working fine. But today we had a strange problem. When the user tries to post the data to integration server he is getting the response as below,
    SAP Web Application Server
    ==========================
    500 Connection timed out (-5)
    Error: -5
    Version: 6040
    Component: ICM
    Date/Time: Mon Oct 22 05:01:00 2007
    Module: icxxthr_mt.c
    Line: 2603
    Server: ABCD_XWD_11
    Detail: Connection to partner timed out after 60s
    But after some time its working fine (without doing anything) without any problem. I am searching for the root cause of this problem. Any ideas on this?
    Please help me out in this.
    Thanks in advance,
    Prasad Babu.

    The target system might be too busy to accept any new requests and that the reason it gave the error message.
    VJ

  • Failed to run the action: Install Software Updates. CI Version Info timed out?

    Hi,
    I have a task sequence that runs on servers to automatically install the advertised updates in software center. I have one server that is not installing these updates and from the smsts log I see an error about "CI Version times out" Does anyone
    know what this means? TIA
    <![LOG[One or more updates failed to install, hr=0x87d00314]LOG]!><time="06:37:50.387-120" date="04-25-2015" component="InstallSWUpdate" context="" type="3" thread="31312" file="main.cpp:202">
     <![LOG[Process completed with exit code 2278556436]LOG]!><time="06:37:50.387-120" date="04-25-2015" component="TSManager" context="" type="1" thread="26924" file="commandline.cpp:1123">
     <![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="06:37:50.387-120" date="04-25-2015" component="TSManager" context="" type="1"
    thread="26924" file="instruction.cxx:804">
     <![LOG[Failed to run the action: Install Software Updates.
     CI Version Info timed out. (Error: 87D00314; Source: CCM)]LOG]!><time="06:37:50.434-120" date="04-25-2015" component="TSManager" context="" type="3" thread="26924" file="instruction.cxx:895">
     <![LOG[Set authenticator in transport]LOG]!><time="06:37:50.434-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="libsmsmessaging.cpp:7734">
     <![LOG[Set a global environment variable _SMSTSLastActionRetCode=-2016410860]LOG]!><time="06:37:50.636-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924"
    file="executionenv.cxx:668">
     <![LOG[Set a global environment variable _SMSTSLastActionSucceeded=false]LOG]!><time="06:37:50.636-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="executionenv.cxx:668">
     <![LOG[Clear local default environment]LOG]!><time="06:37:50.636-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="executionenv.cxx:807">
     <![LOG[The execution engine ignored the failure of the action (Install Software Updates) and continues execution]LOG]!><time="06:37:50.652-120" date="04-25-2015" component="TSManager" context="" type="2"
    thread="26924" file="instruction.cxx:962">
     <![LOG[Set authenticator in transport]LOG]!><time="06:37:50.652-120" date="04-25-2015" component="TSManager" context="" type="0" thread="26924" file="libsmsmessaging.cpp:7734">

    Please have a look at this similar post:
    https://social.technet.microsoft.com/Forums/en-US/7ebe1966-1417-4e5e-ba29-1aac6b5b0de1/sccm-2012-deployment-of-updates-failes-with-ci-version-info-timed-out?forum=configmanagersecurity
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Synchronization object unnamed timed out.

    Hi All,
    We are using OBIEE 10.1.3.4.
    Database :- 11g
    One report on dashboard taking long time to come and after that is showing below error.... Any idea or log file to look into it.
    View Display Error
    Synchronization object <unnamed> timed out.
    Error Details
    Error Codes: YI8IC529
    Nawneet

    Hi ,
    iam facing similar issue,the report is running outside the dashboard..
    when i checked in manage sessions the report is getiing completed in less than minute but iam not able view the report (pivot view),when i cancelled the report it throws the above error code..
    Thanks in Advance
    Regards
    Abdul Mathin

  • Device gets timed out?

    Hi. I've been having some similar problems as many others but I haven't seen this particular one addressed yet. Each time I try to sync my new iPod touch to iTunes I get this message: "the ipod cannot be synced. the device timed out." Then the second message: "the required disc cannot be found."
    My music plays just fine on iTunes. I was able to sync some photos but cannot sync my music. I've tried different things: switched from usb hub directly to laptop; used a different usb port in my laptop; checked my device manager and it does recognize the Apple Mobile Device USB Driver; tried to only sync a handful of songs instead of my entire list; have some songs on an external hard drive, some on my 'C' drive and some created directly from cd to iTunes. Any suggestions would really help as I'd like to be able to use this awesome new device. Otherwise I see a spot on the far wall with it's name on it. Thanks.

    Hi,
    i have the exact same issue. the library is fine, am running winxp with all updates sp2, am running itunes version 7.6.0.29, the disks are fine, defragged with no errors, there are no errors with the mp3 files. the ipod touch is connected directly with the supplied usb cable. There are no third party aps running in the background.
    itunes refused to upload mp3 files to the ipod with error message:
    "the ipod "ipod name" cannot be synced. The device timed out"
    This error message is displayed twice.
    While browsing google, i find that i am not alone with this issue. The only conclusion that i can find is that apple have shipped a batch of defective ipods but i hope this is not the case as i like my ipod, even tho you cant use it for data storage and itunes wont recognize it without an internet connection which is also annoying. another annoyance, there is no filename display column in itunes, why is this?

  • Read timed out error while opening monitor tab in DataServices

    Hello all,
    Am getting a "Read timed out" error when I try to open the monitor tab in DataServices admin console for a few jobs only. For several jobs, monitor tab opens just fine. But for a few it doesnt and throws the error mentioned above. Mostly this behaviour is noticed with a job having several workflows and dataflows.
    The version of DS used is 12.1.0.0. Tried to gather some info on this issue, but couldnt find any relevant thread. Would really appreciate if anyone could help me with it.
    Regards,
    Prem

    check the following post
    http://www.forumtopics.com/busobj/viewtopic.php?t=148213

Maybe you are looking for

  • How to use the same bean from Jsp and Servlet

    I want to use the same bean instance from both the servlet and jsp. for eg. if a create a bean using the jsp:useBean in servlet and if a modify some values, that values should be reflected while i access the same bean from the servlet. But instead of

  • Mail on external hard drive.

    Is it possible for me to have my "Mail" folder located on an external hard drive so that it can be the same regardless of which of my Macs is plugged into it?

  • (Another) Recent Exchange Upgrade - Slow Speeds

    Since my exchange was upgraded 9 days ago, I have had diabolical (less than 1meg) download speeds. I appreciate the time to settle down can be up to 10 days, but my speed seems to be getting worse, not better. I don't have a Hub, I'm using a d-link D

  • Problem Installing XP

    Hello there, So I was trying to install XP. I have the CD, I launch Boot Camp, I make a partition, then it boots the XP CD and copy the installation files, I select what partition to install it on, and then it reboots the computer and then it take me

  • Moving files with same name, different extension (automator?)

    I'm trying to find a way to move a large number of files in multiple directories (all at once or directory-by-directory, doesn't matter) if they have the same name but different extensions. For example, let's say I have a photo directory with the fol