CHANGE BRUSH SIZE WITH CTRL and alt KEYS

Hello everyone,
i'm on the road with my new macbook and i have a problem with setting up my wacom pen.
At home i use a iMac with CS5 and to change the brush size i press the alt and the ctrl key and move the pen to left/tight up/down to chang size and hardnes of the brush. I find this very handy!
On my new Macbook i have CC and i don't have the option to use this easy key combination, i was loking around and did some google, but i could not find the place to get the same settings on my macbook.
Is there anyone who can help me?
Thank you very much.

When you press and hold Option/Alt  + Control  and Left mouse click and drag nothing happens?
(the button on your pen is set to left click?)
The Option/Alt key should always be the second key to the left of the spacebar
The Control key should always be the third key to the left of the spacebar

Similar Messages

  • Changing brush size with keyboard?

    is there a way to change the size of a brush, like that of the clone stamp without having to drag the slider in the property inspector, but instead with a keyboard short cut like you can do in Photoshop?

    It's possible that there exists an extension for this...
    http://johndunning.com/fireworks/
    http://orangecommands.com/
    Here are a couple of places I'd search for this... Maybe it'll help!

  • Changing brush size with mouse

    how to change size ardness of brush with the mouse on photoshop cc, mac os ? normaly it is ctrl + cliq up/down and left/ right

    Thx a lot kelly !!
    I was clicking and then control option
    Merci beaucoup !!

  • Change brush  sizes using [  ] too slow

    I've recently swapped from Windows to Mac and I'm glad to be on Mac now. But whenever I'm changing brush sizes using the bracket keys the response time is way to slow.. I search the forum but found nothing on this. anyone have a fix for this..
    Running Leopard with OS 10.5.4 three internal harddrives and 10 gigs ram.
    All updates and patches were installed prior to photoshop.
    Machine is one week old.

    I completely remove Photoshop and did a clean install. Before changing anything I opened an image and tried increasing and decreasing my brush size using the bracket keys and everything was fine. The brush changes as soon as you hit the bracket key.
    But as soon as you highlight the info palette top right corner and make it active then come back over the picture and try changing the brush size I'm getting a one second delay. If I hit the bracket key three times quickly the brush completely disapears and then reapears at the appropriate size.
    This is a clean install with no plugins, no new fonts, no new nothing.
    I then downloaded the latest upgrades.. Reset disk permission, ran the chron scripts and I'm getting the exact same reaction from photoshop when attempting to change brush size with the bracket keys.
    Can anybody else reproduce this buy highlighting the info palette??
    I called a buddy who also recently purchased a new Mac Pro and his machine is doing the exact same thing.

  • Both Ctrl and Alt stopped working on T410

    Hi All,
    Today, both Ctrl And Alt keys on my T410 stopped working. I tried updating the drivers, rebooted a few times but no luck. I am using Windows 7 64 bit. There has been no recent changes on my latpop. I can use Fn key as Ctrl key after enabling the swap feature in the bios. I dont know if I can some how use another key for Alt key. I am wondering if it is a key board problem then how come both keys (left and right to the space bar) are not working ? will greatly appreciate any ideas,
    Thanks,
    -NA

    both shift and ctrl doesn't work, so it seems not be hardware issue.
    Assumption is the mother of all f.... Okay, did you make sure? Try burning a LiveCD of popular distro, boot from it and see if the issue persists.
    Before changing any settings, can you hook up an external keyboard (e.g. a USB keyboard). See if it has the same problems.
    After that, fiddle around with keyboard settings an layouts. Perhaps the reconfiguration will help.

  • ACR 7.3 Bug on Adjustment Brush tool - changing brush size problem.

    I update photoshop and using ACR 7.3 and now having big problem when I use Adjustment Brush took. Phe problem is when try to change brush size with holding right mouse button and moving the mouse. Behavior completely changed and its impossible to predict if I move mouse right what will happen.
    Please check solution for it. old behaviour was great. I think this is not new feature, its bug.
    Thanks in advance.

    No need.
    Already bugged and acknowledged: http://feedback.photoshop.com/photoshop_family/topics/bug_crash_adjustment_brush.

  • How can I set the CS5 to Intuos Pro Large for changing brush size and opacity and others?

    How can I set together  to  my PS5 or Ps6 in order to change brush size and opacity at the Intuos Pro Large?
    Nachricht geändert durch Orhan Tarman

    The MTU setting on the interface is the layer 3 packet size. In this case, the MTU is set to 1500, but the largest frame size transmitted on the interface (including layer 2 headers) is 1516. It sounds like you are experiencing another problem at the LES.

  • Mouse Wheel Scroll - Change Brush Size

    Hi
    I use the "Liquify" filter a lot, and I've always wanted to be have the mouse wheel adjust brush size.
    (I'm not that keen on using the left-right bracket to adjust brush size.)
    Thanks.
    Q. Barrie

    I'm not sure, but with the OpenGL features enabled you can use a couple of combinatorial gestures to change brush size, and it gives you very fine control:
    Hold down the Alt key and click the right mouse button down on your image.  While holding it down, if you drag the mouse left, your brush will get smaller, and if you drag right it will get larger.  Drag it up to make it softer, down to make it harder.
    -Noel

  • Changing brush size in camera raw?

    I'm having trouble with changing brush size in the camera raw brush tools.
    What I use for input is a scandinavian keyboard and I have to type in alt gr+8 and alt gr+9 instead of brackets.
    This works great in Photoshop,  but sadly not in Camera Raw.
    Is anyone able to help me?

    That works well, thanks for this.
    Any idea why the brush sizing feature is not similar to Lightroom where you can simply scroll vertically on the Magic Mouse?
    Cheers,

  • Right side CTRL and ALT don't work

    As a southpaw, I'm finding it a bit frustrating to work with my fresh install of CS5 Illustrator.  The CTRL and ALT buttons only behave properly when then left side buttons are used.  I have the mouse in my left hand, so I want to use the CTRL and ALT buttons on that are on the right side of my keyboard.  However, they appear to be ignored by illustrator.  I don't have this problem in photoshop, just illustrator.  The keys are behaving normally in all other applications, and I have not reconfigured any keys in windows.  In fact, it's a fresh windows install.  Any advice will be much appreciated.

    thommango wrote:
    As a southpaw, I'm finding it a bit frustrating to work with my fresh install of CS5 Illustrator.  The CTRL and ALT buttons only behave properly when then left side buttons are used.
    Unfortunately, i don't think my comment will be of much help but in CS4 it's working OK.
    Could it be possible that, without knowing it, you've set some settings somewher? The mouse? Tablet, if you have one... etc.?

  • Inserting bbcode commands with Ctrl or Alt +{letter} commands

    Hi,
    I don't know if I missed it, but I am used to be able to enter commands like <Ctrl>+b (or  <Alt>+b) for inserting [ b] and matching [ /b], or for wrapping the selected text with the appropriate tag, from other forums. Same for i, q, etc. E.g. in xda forums you have that with <Ctrl> and in the gentoo forums with <Alt>. Also they provide buttons so that you can select a text, press the url button (Or type <Ctrl>+u) and enter an url this text should hyperlink at. I find that very useful and speeds up writing while highlighting important parts of the text... Has this already been discussed? I used the search function in the forum discussion area, but didn't find a similar discussion.
    Cheers

    yeah, better than nothing, a bit clumsy, but still something 
    I found "it's all text!" but haven't tried it yet. I also contacted the dev of the FF extension "BBCodextra" which provides right-click context menus for inserting bbcode. I asked if he could add shortcuts to his extension, he liked the idea, but doesn't have time for coding any more... I might do it on my own, but have never coded a FF extension, so it wouldn't be a 30 minute job.

  • In past versions of FireFox there was a view option that allowed a change in size of fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

    In past versions of FireFox there was a view option that allowed a change in size of fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and needs to be added to version 6.

    You can use "Ctrl +" and "Ctrl -" to zoom pages quickly and "Ctr 0" (zero) to reset the page zoom.
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    There are also page zoom buttons in the toolbar palette in the Customize window that you can drag on a toolbar.
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
    *http://kb.mozillazine.org/Toolbar_customization
    *https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

  • How to change flash size with ac3?

    I want to change flash size with xml. Sample config.xml
    <genGenis>300</genGenis>
    <genYuksek>100</genYuksek>
    My flash read xml and change size to 300 * 100
    After working in a flash I want to change the default values. Is this possible?

    Have you worked with XML before? You're going to need to load that XML file and wait for it to complete. After you do that, are you using layout logic based on these values to create your content? Meaning do you have code in place to realize you have (as you said) 500x200 space so your code is able to use the space available effectively? Or do you just expect the content of the SWF to scale automagically?
    As for the loader, you can use a simple URLLoader to load the external XML file. Here's a quick Adobe code snippit and explaination on how to load it:
    http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e6a.html
    Once you have the XML in an XML object you can just access the value via the XML variable name you make (e.g. myXML) with the name of the node while getting its text value. In your case you'll need to convert it to a Number because you may want the flexibility of using fractions (e.g. 1.5, 500.25, etc). So you'd need to case the value to a number. So to get the width it'd be like: var myWidth:Number = Number(myXML.genGenis.text()); and same for height just changing the variable and node name as needed.
    Now that you have your values you can write layout code to use the numbers and handle the content creation yourself.
    If you don't do that, as Andrei1 mentioned you'll need to affect the object embedded directly using ExternalInterface (Flash AS3 talking to the webpages JavaScript) requesting the object be resized to the new size.
    You'll want to make sure your stage.scaleMode = StageScaleMode.EXACT_FIT; or stage.scaleMode = StageScaleMode.NO_BORDER; so your SWF content is "stretched" to the size you request. Exact fit will allow the content to distort if necessary to fill the width and height. No border will scale the content to the size specified but will maintain the aspect ratio. It's up to you whichever you want.
    If you have any specific questions on any of this just ask.

  • TS3048 I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    I have just purchased a new apple cordless keyboard.  The numeric line of keys along the top are not functioning as they should.  For example I am unable to get a question mark or a forward slash.  I have tried holding down both shift and alt keys.

    Thanks for prompt response - I tried what you suggested but I'm afraid it has not helped.  It seems as though the line of number keys along the top aren't actually doing what is printed on them.  Some are OK, but the further towards the right hand side of the keyboard you go, the less predicatable it becomes.  So whilst the second key from the left gives me 1 and ! when holding the shift key, by the time I get to the 6 when I press and hold shift I get ^ rather than & symbol which is what is actually printed on the key.  The & symbol is actually on the next key along - and when I hit the key with 8 I get * rather than the ( which is printed on they key but actually located on the next key along.  Things get even more muddled by the time I am over on the right hand side as rather than a question mark (I have had to type the word as I cannot find the symbol anywhere!) I get this _ and the other symbol marked on the key is a comma, but I get - instead.  It is going to drive me mad if every time I want to type something it is a guessing game....!  What do you suggest - question mark

  • How to change font size in smartform and set layout of smartform

    Dear abapers,
                           I want to change font size in smartform and also set the layout of smart form how can we do this.
                                                 Thank you sir.

    Hi,
    you can do it first you need to goto smartforms tcode there click on radiobutton 'Style'.
    Give any name and click on create. Right sideyou can find character format right click on it and create a node .A pop will raise gve a 2 characterlike z1 or a1 etc click on font tab gve size and font style and click on save and activate. Use this style in your smartform you can apply what ever styles created in styles you can use it in your smartform by that smartstyle name.
    When we create text in output options give your smart style name and click on general attributes . Select your text and apply the style what thse size it should be and what the font style it should be.
    Goto smartforms tcode and select formpainter in application bar set layout according to your requirement.
    Thanks,
    venkat

Maybe you are looking for

  • Leopard volume won't start up all of sudden. Utilities find nothing amiss.

    I have a Leopard partition on the hard drive of my iMac G5 (non-Intel) computer that, all of a sudden, refuses to start-up. When I attempt to start-up the computer via that partition, which is one of four start-up volumes on the iMac G5, all I can ge

  • WiFi or Ethernet do not work!

    I Have a Macbook and the Wi Fi or Ethernet will not work. I renew DHCP lease and the internet works for 10 seconds than I have to renew it again. I have 2 more Macs and they work fine. I have two routers and this computer has the same problem with bo

  • JDBC Adapter stored procedure call

    Hi All, I have a requirement of calling stored procedure through Reciever JDBC Adapter, where in multiple records are to be provided as input at a time, also multiple records should be recieved at a time. Can any one tell me how the structure of data

  • ORABPE-31015: Cannot get Object part 'Responses'. No parts are set message

    Hi All, I facing an issue while sending a email notification. [default/NotificationsBPMProject!1.0*soa_d31bba5a-2fb8-406a-aba3-f338ad25ff87.BPM-NotificationService]:sendEmailNotification Performing outbound request/response interaction.. [2012-07-11T

  • ITunes will not work - QT fails to initialize

    Like many others here, I've had problems ever since downloading itunes 5. When I try to launch iTunes, I get an error stating "QT failed to initialize. Error# -2095. Please make sure QT is properly installed." I've tried removing QT using add/remove