Change date/time layout in server.log to show milliseconds

Hi,
I need to debug the JDBC session to find delays in my source.
I used following to get the JDBC debug info:
-Dweblogic.Debug=weblogic.JDBCConn,weblogic.JDBCSQL
My problem is that the layout of the server log file does not show the milliseconds, it shows only the time with seconds.
e.g:
####<Feb 20, 2008 5:33:22 PM CET> <Info> <JDBC> <xxx> <eFlexServer> <main> <<WLS Kernel>> <> <BEA-001132> <Initialized statement cache of size "10" for connection in pool "null".>
What can I do to see also the milliseconds in the server.lof file?
Thanks for help.

Which release of WLS are you using? We had added a timestamp column in the server log from WLS 9.0 onwards that is the raw timestamp of the message in millis.

Similar Messages

How do I get the last changed date & time of a file in app server?

Hi Experts,
How do I get the last changed date & time of a file in app server?
Thanks!
- Anthony -

Hi,
that's what I use...
CALL 'C_DIR_READ_FINISH'.             " just to be sure
CALL 'C_DIR_READ_START' ID 'DIR' FIELD p_path.
IF sy-subrc <> 0.
    EXIT. "Error
ENDIF.
DO.
    CLEAR l_srvfil.
    CALL 'C_DIR_READ_NEXT'
      ID 'TYPE'   FIELD l_srvfil-type
      ID 'NAME'   FIELD l_srvfil-file
      ID 'LEN'    FIELD l_srvfil-size
      ID 'OWNER' FIELD l_srvfil-owner
      ID 'MTIME' FIELD l_mtime
      ID 'MODE'   FIELD l_srvfil-attri.
*    l_srvfil-dir = p_path .
    IF sy-subrc = 1.
      EXIT.
    ENDIF." sy-subrc <> 0.
    PERFORM p_to_date_time_tz
      USING    l_mtime
      CHANGING l_srvfil-mod_time
               l_srvfil-mod_date.
    TRANSLATE l_srvfil-type TO UPPER CASE.               "#EC TRANSLANG
    PERFORM translate_attribute CHANGING l_srvfil-attri.
    CHECK:
      NOT l_srvfil-file = '.',
      l_srvfil-type = 'D' OR
      l_srvfil-type = 'F' .
    APPEND l_srvfil TO lt_srvfil.
ENDDO.
CHECK NOT lt_srvfil IS INITIAL.
pt_srvfil = lt_srvfil.
FORM p_to_date_time_tz USING    p_ptime TYPE p
                        CHANGING p_time   TYPE syuzeit
                                 p_date   TYPE sydatum.
DATA:
    l_abaptstamp TYPE timestamp,
    l_time       TYPE int4,
    l_opcode     TYPE x VALUE 3,
    l_abstamp    TYPE abstamp.
l_time = p_ptime.
CALL 'RstrDateConv'
    ID 'OPCODE' FIELD l_opcode
    ID 'TIMESTAMP' FIELD l_time
    ID 'ABAPSTAMP' FIELD l_abstamp.
l_abaptstamp = l_abstamp.
CONVERT TIME STAMP l_abaptstamp TIME ZONE sy-zonlo INTO DATE p_date
      TIME p_time.
ENDFORM.                    " p_to_date_time_tz
Regards,
Clemens

Changing date/time ...

I have a question about changing date and time ... thanks a lot in advance.
I have .CR2 files and I want to change the "date time original" info ... I want to change this info in the raw file, so I clicked on the "write date or time changes to into proprietary raw files" check box in the catalog settings window ... and then, after changing date/time with the "edit capture time", Lightroom wants to save changes and after clicking the arrow on the thumbnail, it creates a sidecar file. If date/time changes is to write directly into raw file (because of catalog settings indicated above), why does Lightroom create sidecar .xmp file?

There are two things going on here.
1. When you change the capture date/time (Date Time Original), the change is immediately reflected in the EXIF portion of the Metadata panel in the Library module. Because this is a metadata change, the warning arrow appears on the thumbnail (if you have that set to show in the View Options)....and clicking on that arrow brings up the "Metadata changed, do you want to save to disk" dialog. Note that this happens when you do any kind of metadata change, not just changing the date/time. At that point you can either decide to write the metadata to disk, or not.....if you typically write your metadata changes to XMP I guess you'd say "Save", but if you don't then just ignore it. Of course if you say "Save" then Lightroom will do as requested and write the Metadata, if it's a DNG,JPEG,TIFF etc, the Metadata is written to the XMP section of the file header....but if it's a proprietary RAW then it's written to an XMP sidecar.
2. The second thing is that if you have the option set in the Catalog Settings to write date/time changes into proprietary raw files, then the change that you make is reflected in the Raw file.....this is a different change to the XMP update.

Change Date Time format in Iplanet Access logs

Hi,
We are currently using iplanet web server. The default date format in the access logs is dd/mmm/yyyy:HH:MM:SS GMT. How can we change this format to yyyy/mm/dd:HH:MM:SS GMT.

You should not change this format. The default date format complies with the "common log format" which is readable by many log analysis tools.
That said, if you still want to change the date format, you can replace %SYSDATE% with %LOCALEDATE% in your flex-init line. LOCALEDATE will cause the WS to use the date format set by your OS.

Time stamp in server logs

Hi,
I am using WLS 8.1 and 9.2, the defalt time stamp format in server logs contains the following format:-
hh:mm:ss, can we change the time stamp to include milliseconds also, if yes then how?
Thanks in Advace,
TK.

That's only for the access log format, not the server log, and it only controls which additional elements can be displayed. It is possible to add custom fields by adding Java code, but again, that's only for the access log.
As I said before, when you asked this before (I don't know where I saw you ask this before), it's really not practical to alter the server log timestamp format. You're better off writing your own log messages with your millisecond timing.

Change Date Format in iplanet Access logs

Hi,
We are currently using iplanet web server. The default date format in the access logs is dd/mmm/yyyy:HH:MM:SS GMT. How can we change this format to yyyy/mm/dd:HH:MM:SS GMT.
Thanks in advance

Sorry, I don't know enough about web server to answer you.

Change Data Capture in SQL Server

Post Author: rtamanji
CA Forum: Data Integration
I am having primary key constraint problems whenever there is a failure during the data flow from the source to the target, and I have to restart the process. It looks like check points only occurs if the data flows completely ends. How often are these check points initiated ? The AL table keeps track of this value, is there a similarly table to determine the last record read ? Or does DI reads the entire Repcmd table using the last xact_seqno stored ? Thanks for any information.

It is not using triggers. The source is the transaction log.
Related link:
Basics of Change Data Capture
...The source of change data for change data capture is the SQL Server transaction log. As inserts, updates, and deletes are applied to tracked source tables, entries that describe those
changes are added to the log. The log serves as input to the change data capture capture process. This reads the log and adds information about changes to the tracked table’s associated change table. Functions are provided to enumerate
the changes that appear in the change tables over a specified range, returning the information in the form of a filtered result set. The filtered result set is typically used by an application process to update a representation of the source in some external
environment. ...
Kalman Toth, SQL Server & Business Intelligence Training; SQL Server 2008 Training

Changing Date/Time(zone) on ACS5.1

Would love to know where I can change the date/time(zone) within ACS v5.1. Changing it in the BIOS doesn't have a zone option, just date/time. ACS then displays something completely different upon boot. Haven't been able to find any settings for this in the GUI, and the one link I did find in a discussion points to a doc that apparently I'd need special access for.
Attempting to join this to AD, so instructions on setting up the NTP server would also be helpful.
None of these options were available during the clean setup of 5.1.
Thanks much!

Hi Wayne,
This can be done through the command line over a console/SSH connection.
1. To manually set the clock:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1036987
2. To configure an NTP server:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780
3. To configure the time zone:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013028
Hope this helps,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Need to change Date/Time stamp on jpeg file

I combine images into panoramas using PTGUI. The problem is that the output image file is date stamped as the time that I created the image. I really want the date/time stamp to be the same as the images that go into the panorama. I cannot find a way in LR to change this.
Lee

> By the way, Victoria, should you be promoting your url here? It belongs in your profile. It's in the forum rules somewhere and others have been picked up on it before.
>
> Joe
Oh, thanks Joe, I'll change that then. I did go looking for forum
rules, but couldn't find any!
Victoria

How to change the Time Zone in OAM log & audit files

Hi All,
I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
Could any one please tell me how to change the Time according to the place ?
It is an urgent plzzz.
Thanks & Regards,
Vaasu.

could you find how to change the tine zone. i am also getting this problem
thanks

Batch-change date (time)...

I know you can batch-change the date in iPhoto, and there's the option to add X seconds between each photo, but what I need to do is change the time by XX seconds/hours. Basically, this weekend we had two camera shooting a trip we were on. I thought both cameras were synched (clocks) but one camera was off by 12 hours (it was on AM when should have been PM). So, I need to add 12 hours to each photo for the 1 camera. Is there any way to do this via a batch (ie. not manually going through each of the 150+ photos and setting the time) so when I make an album of shots from both camera, sort by date/time, they synch up.
If there's no way to do this in iPhoto, could anyone suggest another application that could do this before importing into iPhoto?
Thanks,
Kristin.

Rather than start a new topic, I'm going to just refer to this one since it's recent and exactly the issue I was trying to solve. My situation is that I bought a new camera in January and still had 2006 on my mind, so all the pictures I've taken this year are off by a year. I used PhotoInfo to change the EXIF data folder by folder in my iPhoto Library folder (by this I mean I had to batch change every folder in Originals/2007 and Modified/2007). 2 folders didn't take the changes, but that's another issue for a different forum.
Most of my pictures now have the correct EXIF data, however iPhoto doesn't show the correct info when I select the menu item Photos>Get Iinfo. Doing some searches here says that the only way to update iPhoto is to reimport the photos with the new EXIF data. My question is how do I do that without screwing everything up? I have originals and modified versions of files that are affected. How do I bring them back in such that if I use the Revert to Original command in the contextual menu that the modified files are still correctly linked to the originals?
A secondary question is whether iPhoto is really the program I want to use. Most of my major changes I make using Photoshop. Recently after making changes in Photoshop as well as a few minor tweaks in iPhoto (I don't remember which order) when I tried to revert to the original it no longer existed. It reverted to a modified file (modified in PS or iPhoto, don't remember which). Since then I've been making a duplicate in iPhoto and then modify that one in PS as well as iPhoto. However, after making modifications in PS I have to save it as a JPG in order to keep it organized with all my photos in iPhoto. It would be nice to keep a PSD copy filed along side it. Should I be using something else besides iPhoto that handles EXIF information and changes seemlessly as well as JPG and PSD (and probably RAW in the future)?
Thanks in advance for any info/tips.

Batch Change Date/Time - same time to full batch, not offset timing?

Is there a way to force Aperture to change the date/time on a batch of photos with ALL images to the same exact date/time?
Right now, I have a bunch of scanned images with the wrong date/time, but of course, scanned at different times (embedded image date/time). When using Aperture 2.1's "Metadata", "Adjust Date and Time..." function, I only have one image with the input desired date/time, then all the other scans have a different date/time based on the timing offset difference from the scanning, which over the course of several scans changes by several days quickly.
Does anyone know of a work around? I'd hate to manually adjust hundreds/thousands of image metadata by hand when Aperture should do this easily.
Thanks!!

Correct, I am referring to the EXIF data. Aperture can change this data using the aforementioned "Metadata", "Adjust Date and Time..." feature, it's only that Aperture can't (as far as I can tell) set a batch of photo to the exact date and time among the entire batch.
Perhaps I'll be able to find or create an Apple Script to do this outside of Aperture?
It's a shame though as I can't possibly be the only one with a large scanned collection from years ago I'm trying to archive in proper date order. This would be a great new added feature Apple, if you are also reading this! (I've already submitted the feature request some weeks ago)

Changing Date & Time Taken

Is there any way possible or a preference to set which will not change the date and time stamps on my photos as I manipulate them in Lightroom?

> In other words, whenever DST starts or stops, the capture times will shift by 1 hour, and if you change your timezone in Windows, the displayed capture time will change to display the date/time the pictures were taken in your current timezone (rather than the capture time from the timezone the pictures were taken in.)
That has been fixed in LR2.
> Is there any way possible or a preference to set which will not change the date and time stamps on my photos as I manipulate them in Lightroom?
Manipulating images in LR cannot modify the date/time taken stored in EXIF. I think you a referring to file modification date as you see it in Explorer/Finder, which is quite a different thing.
If so, it goes like this... For proprietary Raw files (NEF, CR2 etc.) it never changes the timestamp, except when you use the 'Edit Capture Time' command. All metada changes are save in sidecar XMPs for these. For DNG, JPEG, TIFF and PSD they are modified each time you save metadata, since the metada is embedded into the actual file. You have no option to change this bevahiour.
Though, for any format you may choose not to save or embed any metadata, but keep it only inside the LR's catalog. Check (or uncheck) the respective prefs in the Catalog Settings dialog.

Changing date & time under eventlog

Would like to know how to adjust date & time settings in the eventlog view for my Cisco 1400 bridge. Tx!

There are two things going on here.
1. When you change the capture date/time (Date Time Original), the change is immediately reflected in the EXIF portion of the Metadata panel in the Library module. Because this is a metadata change, the warning arrow appears on the thumbnail (if you have that set to show in the View Options)....and clicking on that arrow brings up the "Metadata changed, do you want to save to disk" dialog. Note that this happens when you do any kind of metadata change, not just changing the date/time. At that point you can either decide to write the metadata to disk, or not.....if you typically write your metadata changes to XMP I guess you'd say "Save", but if you don't then just ignore it. Of course if you say "Save" then Lightroom will do as requested and write the Metadata, if it's a DNG,JPEG,TIFF etc, the Metadata is written to the XMP section of the file header....but if it's a proprietary RAW then it's written to an XMP sidecar.
2. The second thing is that if you have the option set in the Catalog Settings to write date/time changes into proprietary raw files, then the change that you make is reflected in the Raw file.....this is a different change to the XMP update.

Changing date/time format

Hi there,
I live in the United States but prefer my dates to be in the dd/mm/yy format as opposed to the US mm/dd/yy format. I also like 24-hour time rather than AM/PM. I System Preferences>Language & Text>Region, I found the tool to modify my preferred date/time formats. However, I notice that the format of the date in my menu bar does not change (it still reads Sep 25 when it should read 26 Sep). All other dates/times appear to function correctly. I briefly switched the Region of the computer to the United Kingdom but quickly switched it back because of how autocorrect handled words like "color."
Ideas?

That did the trick - sometimes the easiest thing to do is hard to see. Seems I have been working too long on a Windows machine (unfortunately, I have to do so at work)...
Thanks for the quick help!

Change date/time layout in server.log to show milliseconds

Similar Messages

Maybe you are looking for