Change destination storage during putaway

Folks,
I would need to be able to change the destination storage bin during putaway. I;ve set the indicator in the storage type, however, I am not able to change the destination bin. Any suggestions?
Thx,
MdZ

Hi Csaba,
it was exactly what I read when I have this problem:
"No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units"
As I wrote Continuous inventory upon placement into stock indicator must be unchecked.
Andrzej

Similar Messages

Cannot change destination bin during confirmation

Dear SAP experts,
We are in SAP ECC 5.0. We read that we can change the destination bin during confirmation of TO. We have done the pre-requisite:
1. In relevant storage type (001) we input '1' for dst bin ch during confrm field
2. Untick physical inventory during placement to bin
Then we do GR to PO, which generate TR. We create TR into TO and specifying bin INTERIM in storage type 001. During confirmation in tcode LT12, I cannot change the destination bin. What else do I miss in here?
Best regards,
John

Hello John,
Even though config mentions change of destination bin, there are quite a few limitations.
Have a look at below documentation from SAP
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83e5a4afa11d182b90000e829fbfe/frameset.htm
Snapshot of some imp content.
No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units
Check if your putaway falls in any of the criteria.
Cheers,
Nag

Change storage type during putaway

Hi,
I know it is possible to change the destination bin during putaway.
I set it in storage type and it works.
Is it possible to change also the storage type during putaway by SU (LM02) ?
Thank you
Best regards
Andrea

Hi, thank you for your reply.
The TO is just created.
I want to change the storage type during the confirmation of TO via RF using transaction LM02.
Is it possible?
Thanks

Dest.storag bin change during putaway foreground in LT04

HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes,
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1 allowed ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
james

Hi All
question is
CAN we change destination storage section and storage bin on " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working. my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James

Dest.storag bin change during putaway foreground

HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes,
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1 allowed ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
James
Edited by: Csaba Szommer on Jan 6, 2012 8:10 AM

Hi All
question is
CAN we change destination storage section and storage bin on " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working. my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James

Destination storage unit number on LT03

Hi friends,
When we create a transfer order, we need to fill "Destination storage unit number" (LTAP-NLENR), with a value from delivery (we manage the "Destination storage unit number" with external number range).
Have you any information how to do this?
Please help me
Thanks & Regards
Alessandro

I had the following response from SAP Service:
Unfortunately, the documentation of Enhancement MWMTO01 in SMOD clearly
says:
The user exit in the program is function module EXIT_SAPLL03T_001. In
order to be able to use the user exit, you must create Include ZXLTOU01
and activate the enhancement with transaction CMOD. As parameters, you
can use the TO header (import parameter I_LTAK_VB) and the items (table
parameter T_LTAP_VB). All database changes due to the transfer order
have already been performed. The transfer order is created.
With this user exit, you can update your own tables or trigger follow-upactions. Although changes made to table T_LTAP_VB do not have any
effect, they should still not be made.
Customer enhancement MWMTO003 is available for customer-specific stock
placement strategies though you should check carefully whether it meets
your exact needs. The enhancement is documented in transaction SMOD.
This could be used to determine specific SUs into which addition to
stock should take place but if you want to assign NEW SU numbers during
putaway then this is not possible in the standard.
Sorry I cannot provide you with a better answer. However I hope the
above information is useful to you. If you have no further queries,
kindly confirm the message at your earliest convenience.

Customer function or BADI for Destination storage section (WM)

Hi guru's
I'm looking for a customer function or a badi that allows me to choose the destination storage section (field LTAP-NLBER).
There is something that can help me? I look at EXIT_SAPLL03T_001 and EXIT_SAPML03T_002 but they don't seems to fit my needs.

Hi,
look at this
Exits to change Destination Bin and Storage type during TO creation
Thanks,
Gaurav.

Error - No destination storage bin to be found in storage type

Hi all,
this is my flow -
Create STO PO - ME21n
create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
confirm TO- L_TO_CONFIRM
Using BDC i am doing PGI for VL02n
create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
confirm TO- L_TO_CONFIRM
Create GR - 'BAPI_GOODSMVT_CREATE'
Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
No destination storage bin to be found in storage type 104
I have added 2 lines in the FM at exception part -
error_message = 16
OTHERS = 32.
So my return code for the FM - L_TO_CREATE_DN (_FOR i/b delivery)_is 16
message class : L3
message number : 009
message type : E
No destination storage bin to be found in storage type 104
Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
Pls help me.
Sen

Hi all,
Thanks for your replies.
Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
Storage Bin search Strategy:
(1) By storage section: Not active
(2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
Hope my scenarios are clear. Thanks in advance for your help again.
Best regards
Nagarajan

RF change destination bin

Experts,
I am trying to change the destination bin in RF putaway LM02 transaction.
I hit the F7 NBin go to Change destination screen where i am asked to verify the bin and enter the modified dest bin.When its says verify the bin, should i scan the new bin or scan the old bin ? If scan the new bin in the verify bin field(triggers 'enter' upon scanning) , it takes me back to the previous destination screen with no change of the bin.
If I scan the new bin in the modified dest bin directly , which again takes me back to the destination screen with no change.
What are the actaul steps to perform without having the user manually enter the new bin ?
Thanks for time in advance
Edited by: RKsap193 on Mar 23, 2010 2:51 PM

I tested this practically.Please follow below process
1.Scan the new bin in field ""Verify bin"where you want to do putaway of material .
2.After scan you have to say F7 check. It will automatically display new bin in Modified dest bin field.
3.Say F1 confirm. By this system will bring you to "Destination Information -Single item " screen where you will find the destination bin is changed in destination bin field.
By this in TO display you will see new scannned bin with the putaway & confirmation.
Regards,
Prashant

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

Can i change the storage device for a user on my macbook pro

That basically says it all

It means i want to change the storage device on the computer. I have the drive on the macbook, the one built into it, and i have an external drive. I want to know how i can make the external drive my main source for storage. And if its possible i want it to be for a specific user on the computer

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

Ipod touch 3rd generation is stuck in "waiting for changes to apply" during sync

My iPod touch 3rd generation is stuck at "waiting for changes to apply" during sync. I have the latest update and the latest version of iTunes downloaded. Any suggestions for a remedy to this problem? Thanks!

Here is the link for the downgrade from Apple.
Link: http://support.apple.com/kb/DL1103
Here is the Link before you install Apple 10.3 downgrade Read Oct. 17th the 1st on of the 17th.where I said "A" OKAY
Link: https://discussions.apple.com/message/16500143#16500143
I went into my desktop PC the to Start/My music/iTunes folder.
In my folder there was nothing called ITunes Library.itl., but I had file called iTunes Library, in the center of it labeled "Lib", so I re-named it to "iTunes Library.itl.backup" Then went to the folder from iTunes" Previous iTunes
Library" and copied and pasted mine was iTunes Library 2011-04-02 right into the iTunes main folder.
Close your iTunes folder and then install the previous ver. 10.3 of the Apple link. I did not reboot PC. Did not use Cc cleaner nor add/Remove. then after 10.3 said finished installing 10.3 I clicked on my iTune Icon and iTune came up, iPod not plugged in yet.
Then I clicked on "let iTune to find all my music and install them", said towards bottom of iTunes.
Why we don't have the answer but iTune will put all your music in but you will have duplicates of the songs, so you will have your work cut out for you, takes time. plus some of my Artwork was missing, but I save that too.
I'm not Responsible for this instructions, this is what worked for me.
I think everything here is in order. Lot of my information came from all of you guys.Thank you. took a lot of reading, and trial and errors 2 1/2 day latter.

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

I need to change the storage hard drive for both lightroom and Photoshop from my C drive to F drive

How do I change my storage drive from C to F in both lightroom and photoshop as I am running out of space on my C drive?

Storage Drive ?? Photoshop. What Platform and OS are you running.
I use PC therefore Windows. When I thing about Application like Photoshop I know the are going to be files all over the place. Windows like everything installed on the Boot disk. I gave up the fight many years ago and let windows have it way when application are installed using an installer. However besides the application files you have user files and I break user files down into to categories. Windows User files like applications settings, preferences, cashes, etc and user Data Files, Images, text documents, PDF. Applications like Photoshop also have add-ons an need swap space as well. While all Windows default library reside on the C: drive you can add additional storage to you document, music, picture and video libraries the are not on the c: Most of my user data file are actually on external ESATA drives or USB3 drives. System files, Application Files, Paging, swapping and backup are on internal SSd and Fast Disk drive. Some of the folder that look like they are on C: are actually shortcut links to folders on other drives.

Change destination storage during putaway

Similar Messages

Maybe you are looking for