Change Doc title in Tcode sost when emailing quotation doc

Hi,
Currently, After emailing a quotation, I go to tcode SOST to check the status of the email.
I saw that: the "Doc title" of the email is: Program name/Date/time.
I want to change the "Doc title" to a new value.
Could you please help me with this issue ?
Thanks,

Hi,
I have solved this problem by changing the doc title in corresponding print program
Thanks,

Similar Messages

  • Is there any way to get aperture to include caption and title with a photo when emailing directly from aperture?

    I have been all over and it seems impossible to do... but it also seems impossible that I'm the only one who wants to put a title and description with a photo once, and then have that follow the photo when I email it, rather than having to re-type each little tidbit every single time I email an image. I use aperture for work and am always creating custom batches of images to send to prospective clients. it's crazy having to re-do the information every time.
    Any suggestions for workarounds, plugins... something I'm missing?? iphoto used to do this automatically but it seems it doesn't anymore. even knowing the reason why they aren't allowing it might make me feel less insane
    thanks!

    Thanks both of you!
    I think my iphoto settings must have defaulted back when I migrated to my new computer because sure enough, when I followed your instructions it went back to emailing the descriptions, which is great, and I hadn't ever tried opening the same library in iphoto. That's really convenient. It's too bad (and sort of strange I think) that Aperture doesn't have the same feature but as workarounds go this one is quite lovely.
    The only remaining question is why, when I do open the library in iphoto, the description is intact but there is no title other than the version name?
    For example, in aperture there is the version name, which is something like _DSC1733, the title I added in the "title" bar, which might be "diamond necklace" and then the description which is "18" long, 2carats total weight, platinum, 2013".
    When I open the library in iphoto, the version name is at the top and under it is the decription, and the title is gone.
    Unless there is another button I missed I think I have to go in and add the title into the description, and then just uncheck the version name when emailing so it doesn't show up.
    Any advice? Hope I made the question clear-ish

  • How to include Change Request Title and Description in Approval email

    Trying to figure out how to include the title and description of a Change Request in the email that goes to the managers when they approve it. Below is what we have now in the email template.
    Change request $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Id$: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity'
    SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$, created by $Context/Path[Relationship='WorkItem!System.WorkItemCreatedByUser' TypeConstraint='System!System.User']$?$DisplayName$?, requires your
    approval.
    You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
    Alternatively, you can complete the request by looking up Review Activity $Context/Property[Type='WorkItem!System.WorkItem']/Id$ under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
    This basically translates to:
    Change request CR#: Test Change Request, created by TestUser1, requires your approval.
     You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
    Alternatively, you can complete the request by looking up Review Activity RA# under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
    When I click on Insert, there is a huge list of items and sub-items with all kinds of properties and I don't know what to select.
    The Targeted Class of the template is Activity

    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target'
    TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$
    This translates to the Title of the CR (given that the targeted activity is contained in a CR). Simply replace
    Title with Description.
    Also if the Change Manager can approve a CR just by the description you have bigger issues (or just putting everything in the description). What about a reason? Implementation
    plan, rollback plan, testing, etc.?
    http://codebeaver.blogspot.dk/

  • How to change the paper format in SOST tcode from X_65_80 to X_65_266?

    I got data from OTF in SAPSCRIPT and send by email.
    How to change the paper format in SOST tcode from X_65_80 to X_65_255?
    I need to change it automatically from abap.
    Any suggestion?

    Hi,
           change line size and line count in report.
            By default report line size and line count is taken in printer
           settings
    REgards
    amole

  • Downloaded attachments change title and add numbers when saved

    I've had this problem a very long time ... with my previous G-4 and older Operating Systems.
    Using Thunderbird for my e-mail: Someone sends me an attachment titled, e.g., <In Tray Exercise for Sudan.doc>. When I download and save it, the title becomes <In Tray Exercise for#169769.doc>.
    This is a serious problem when my organization wants to maintain a file naming system.
    How can I stop the file names from changing? Thank you.
    By the way, this does not happen when I use Apple Mail.

    Then perhaps the place to ask the question is at Thunderbird's tech support. This appears to be something related to it.

  • I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

    I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

    I guess you mean one of the resume templates.
    What "format" have you saved your finished resume in?
    The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
    There is no Windows version of Pages.
    Peter

  • HT1311 Have changed my Apple id to a new email address. its all working fine on my pc and also comes up with the new id on my icloud page on my iphone, but when i tryto buy something from i tunes on the phone the sign in box still has the old id. how do i

    Have changed my apple Id to a new email address. its all working fine on my PC and also on come up with the new ID on my  icloud page on my iphone but when i try to buy something from itunes etc on my phone, the log in box still contains the old id.
    how do i change this?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    It doesn't sound like you "changed" your Apple ID, sounds like you created a new one. Bad idea. All content bought with an Apple ID is forever tied to that ID. The ID that bought the content is the only ID that can update the content. Apple does not merge IDs not does Apple transfer content from one ID to another.

  • I have created a form in InDesign, exported to a pdf, created an editable form and saved.  When I open the form and make changes and save, the reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is alway

    I have created a form in InDesign, exported to a pdf, then created an editable form and saved.  When I open the form and make changes and save, then reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is always minus the edits.   ????

    Hi chuck,
    If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
    Can you please send the form to me at [email protected]  so that I can have a look.
    Regards,
    Rave

  • HT5621 My ipad recognizes and old email address for icloud.  When I go to change the address it sends me an email verification email that says click the link THAT DOES NOT EXIST IN THE EMAIL!!   How do I get this changed?

    I cannot get my icloud email address changed, but I no longer have that email address.  So it is sending an email to an address that no longer exists, yet I cannot get it to change to my current email address.  WHen I walk through the process, it sends me an "verificaiton email" that DOES NOT have the link in it to verify.  UGH

    Welcome to the Apple community TMOZINGO.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • How can we change the default site name to custom title in sharepoint desginer from email

    i have a site name human resource
    i am using sharepoint desginer workflow to send alert on a list
    it is giving from email as site Name "Human Resource"
    i want to change from title of it to the some custom name like HR Customer care
    rather then site name
    MCTS,ITIL

    I don't think this's possible OOB but there is a codeplex freeware tool you can install and change Sender address as you wish. 
    Here it's: Change Address
    Hope this helps!

  • Automatic refresh of photo order when changing photo titles in iPhoto 9.6

    I've just moved from an older version of iPhoto to 9.6.
    In the previous version, when you changed the title of a photo (within an event), the sort order of the photos was automatically and immediately updated.  In 9.6 it isn't - I have to do View - Sort Photos then select another sort criteria (e.g. date), then do this again for title, to get the photo order to refresh.
    Does anyone know if I am I stuck with this new (retrograde) behaviour, or if there's a way to get iPhoto 9.6 to automatically refresh the photo order?
    Otherwise, is there a keyboard shortcut for refreshing the photo order, or for changing the view - sort photos criteria?
    Thanks in advance for any help!

    It will resort if you leave the Event (click All Events button) and then go back.  Not a good solution but quicker IMO than using the View ➙ Sort menu method. 
    Be sure to send a bug report to Apple via http://www.apple.com/feedback/iphoto.html.

  • I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

    I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

    See:
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • Changing the name of the form when attached to an email

    Good Day All;
    I am wondering if there is a way to change the name of an attachment when the email button is clicked.
    Let me explain.
    I have designed a form that will be emailed from one are to another and when the email button is clicked the email attachment is named (example)  “_150s2140t32f8b0iu.pdf”. Of course this is a meaningless name. I would like to somehow change this to better represent the name of the form.
    Thanks for any suggestions
    Thanks
    Chomp

    Hi Chomp,
    It sounds like you are clicking the email button when in Preview in LC Designer. When the form is being Previewed it is given a temporary name. If the form is opened in Acrobat directly, does the email button attached the form with the proper/full name?
    If you want the form to be given a named based on user's inputted data, then you will need a trusted function (.js file) on every user's computer. See this discussion: http://forums.adobe.com/message/2266799#2266799.
    Niall

  • Airplay audio streaming from Iphone to ATV crashes when changing randomly title?

    Why does airplay audio streaming from Iphone 4S iOS 7.04 crashes when changing randomly title? The ATV is not connected to a TV, only to an AV Receiver. Anywhere the same problem?
    Thx a lot
    Nolame

    Oops - I messed up the title-
    This is with iOS 7.0.2 and Apple TV 6.0.

  • When emailing from iPhoto, the recipients address comes up incorrect, even though it is correct in both my email accounts.  How do I edit it?  I have changed it, but the next time it appears it contains the same errors.

    When emailing from iphoto with a template, the recipients' address comes up incorrect (a couple of letters are wrong).  The addresses are correct in both my email accounts, including the one I am using for the iphoto email.  I have corrected the address prior to sending the email, but they come up with the same errors the next time I choose them in the iphoto 11 program.  How do I correct thes email addresses?  thank you

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

Maybe you are looking for

  • Can an iPhone be update on a PC if previously updated on a MAC?

    Can an iPhone that has always been updated on a Mac be updated on a PC?

  • Creating documents with SCMS_DOC_URL_CREATE in SAP Content Server

    Hi there, I have a Problem here  with the Knowledge Provider concerning SCMS_DOC_URL_CREATE and hope anyone could help me out. For a SAP Records Management document I am calling BAPI_SRM_DOC_CREATE and get a LOIO and a PHIO ID for my new document. Th

  • Weblogic Service Invocation Error-Urgent help required.

    failed to invoke operation 'searchCustomerDetails' due to an error in the soap layer (SAAJ); nested exception is: Message[ failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on cl

  • Discover more sharepoint 2013 Farm

      Dear all, We have three sharepoint 2013 Farm ( test , staging ,PROD ). I have discovered test Farm after modify microsoft.sharepoint.foundation.library.mp with test server  , after that when i change the test to staging server in config file stagin

  • Multiple addresses for one contact in a Group

    I need to add a work address and a home address for ONE contact in my address book to a group. How can I do this without expanding the group and manually adding the other address? I don't want to have to expand the group. Thanks for any assistance.