Change for Unit of measure in condition master

Hi, gurus..
I want to know this is SAP error or not..
I created condition for material H20.
H20     70500 usd per 1 SET
and edited the unit of measure in addtion of material master record.
1 EA - 1EA
1 SET - 6 EA
then I create SO in VA01 with line item
H20   1EA   ...
but condition record showed me a wrong value..
H20    11774 usd per 1EA...
70500 / 6 = 11750 usd..Why 11774...??
So, I changed the condition for more test..
H20 11750 usd per 1EA...
After input line item in VA01.
H20 1 Set...
then condition was 70500 usd per 1 SET ..Right result..
I tried it on other system ( Best Practices 1606) once more but result was same.
This is SAP ERROR ??? or not..
Plz..give me your ideas..

Dear Kim,
this error will come due to conversion factor at sales order level .kindly check in the item level how the conversion factor will take the system and also try to change the Quantity and check once again. this will come rare case , if you want to check the conversion error ,debug at the sales order level . for your reference I am attachment the conversion factor path .
Regards,

Similar Messages

Changing Base Unit Of Measure in Material Master

Dear All,
We need to change the base unit of measure of certain materials who have been assigned inspection plan. We have deleted the material from Inspection Plan and later even the plan. But still the system not allowing to change the BASE UNIT OF MEASURE. The error thrown by the system is : Material is assigned to inspection Plan.
Please guide in this regard as changing the material for us will be a very cumbersome act.
Regards

Hi Rohan,
Please check 'display errors' in MM02 when you are trying to change the BUoM. It will say what prevents you from doing that.
Please check:
http://www.sap-img.com/materials/change-base-unit-of-measure.htm
BR
Csaba

Changing the Unit of Measurement in Material Master

Dear Experts,
Material DF21DENG (fert) was created with KGS (kilogram per second) as its unit of measurement. A material BOM was now created for DF21DENG.
I intend to change the unit of DF21DENG from KGS to KG (kilogram). On doing this in the Basic data view of DF21DENG, i get the message " change is not possible because a BOM exists for this material".
In the BOM of DF21DENG, I set the deletion flag on & tried to change the unit in the Material master again but got the same massage.
Please how can I effect this change?

This response was helpful but was solved the problem was that; from the Edit, i selected Delete from the drop down & then the alternative BOM was deleted.

Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

Report for Units of measurement for Material

Hi
Is there any report to extract the alterante unit of measurements for materials in a plant.
Thanks

Hi,
Please use the below table,
Related to Materials:
MARA - Material Master: General data
MAKT - Material Master: Description
*MARM - Material Master: Unit of Measure*
MAPE - Material master: Export control file
MARC - Material master: Plant data
MARD - Material master: Storage location
MAST - Material link to BOM
MBEW - Material valuation
MLGN u2013 Material Master: WM Inventory
MLGT u2013 Material Master: WM Inventory type
MDIP - Material: MRP profiles (field contents)
MKOP - Consignment price segment (old versions of SAP)
EBEW - Valuation of sales order stock
QBEW - Valuation of project stock
MVER u2013 Material Master: Consumption <Plant>
DVER u2013 Material Master: Consumption <MRP Area>
MVKE u2013 Material Master: Sales <Sales Org, Distr Ch>
MLAN - Material Master: Tax indicator
MARC - Material Master: Plant data
MAPR u2013 Material Master: Forecast
MARD u2013 Material Master: Storage Location
MCH1 u2013 Material Master: X Plant Batches
MCHA u2013 Material Master: Batches
MCHB u2013 Material Master: Batch Stock
MDMA - MRP Area data
DBVM - MRP Planning File Entry: MRP Area
MOFF - Outstanding Material Master Records (Maintenance status)
MARCH - Material Master C Segment: History
MARDH - Material Master Storage Location Segment: History
MBEWH - Material Valuation: History
MCHBH - Batch Stocks: History
MKOLH - Special Stocks from Vendor: History
MSCAH - Sales Order Stock at Vendor: History
MSKAH - Sales Order Stock: History
MSKUH - Special Stocks at Customer: History
MSLBH - Special Stocks at Vendor: History
MSPRH - Project Stock: History
MSSAH - Total Sales Order Stocks: History
MSSQH - Total Project Stocks: History
Regards,
Mohd Ali.

Decimal places for unit of measure

Dear All ,
If i change the Decimal Places for rounding in Customizing for Unit of measure ( CUNI tcode) for KG as 6 from 3 whether it will calculate with the 6 decimal places like 0.004756 ( earlier with 3 decimal places it will calculate any multiplication with 0.004 now i want the same with 0.004756 Kg )
whether it will work ?
and where it will impact

Hi
No it will not work like that. And it depend on the transaction where you enter that. In case of Purchase order quntity field it will be always with 2 decimal places because field MENGE has 2 decimal places only. If your system is already live then it is not advisible to do such changes.
Regards
Antony

Upto 4 decimal point for unit of measure

hi,
We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3, SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
best rgds,

Dear Eric,
To change decimal places of Materials follow this:
IMG - SAP NetWeaver - General Settings - Check Units of Measurement
select Units of Measurement & select required Unit of Measure & set decimal places.
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta

Change BASIC UNIT OF MEASURE

Dear All,
I want to change BASIC UNIT OF MEASURE of fresh material which stock is zero,no pr & po.
Path given by Performance Assistant is not solving the problem.
Please help me out.

hi,
while chnaging the basic uint of measure in mm02 for the material, what is the error message it is giving you.
kindly give me the details for further processing.
Regards,
velu

Conversion fator for Unit of Measure in BI 7.0

Hi Experts,
Cud you pls tell me how Unit of measure conversion works in BI 7.0. I am getting dialog box of UOM conversion in the properties of BEX but not able to convert Conversion for Unit of measure?
Thanks in advance!
Sapna

Hi,
Better define Units of measure in that KF.
Hope it helps.
Regards,
Tulasi

In Adobe Acrobat XI pro how do I change the units of measure from inches to centimetres?

In Adobe Acrobat XI pro how do I change the unit of measurement from inches to centimetres?

Edit > Preferences > Units

3 decimal places for unit of measure KG

Hi,
I would like to create a production order. In the field total quant I would like to give the 3 decimal places of mesure KG.
Error: "Only 2 decimal places are permitted for unit of measure KG"
Where can I customize the system, so that 3 decimal places have been permited.
thanks
Desy

thanks
I've seen the place in Customizing where I will maintain it.
Now I only have display authorization for class SS
I will speak with our Basis for more authorization.
Thanks
Desy

Valuation of characteristics for unit of measure "" causes rounding diff

Dear gurus,
I am facing a problem on Goods Issue and Transfer Posting. My Material is maintained with Batch Specific Unit of Measure.
Base Unit = Kg ,and Batch specific unit of Measure = BAL(Bales).
My unit of Issue = BAL. For every bale at the the time of GR, i m storing the wieght of the Bales in the system. Now at the time of Issue and transfer posting, system is giving the following error message:
"Valuation of characteristic for unit of measure BAL causes rounding diff"
In unit = KG, Decimal places = 7, Decimal places rounding = 7
In Unit = BAL, decimal places = 3, Decimal places rounding = 3.
Kindly help me guys...
Thanks

Dear Johi,
See SAP NOTE 147489 - Error XU033 in goods movement with active ingredient. If you doesn't need to check rounding errors:
"For this use the following path: Logistics -> General -> Batch Management -> Define System Message Attributes (Transaction OCHS)."
Edit the system message XU03 to no errors.
Regards

How to assign a value for Unit of measure (like PC, KG...) in ABAP program?

Hi,
    How to assign a value for Unit of measure (like PC, KG...) in ABAP program?
    I want to assign PC in a field to execute the program, like wa-ENTRY_UOM = 'pc'.
    But the system returen a message that "Unit of measure is not convertible to stockkeeping unit PC"
    Could anyone tell me how to assign the value??
    Thanks!

hi,
first convert the quantity in the same unit ( like in you case ST to PC ) by using FM :    MD_CONVERT_MATERIAL_UNIT
CALL FUNCTION 'MD_CONVERT_MATERIAL_UNIT'
    EXPORTING
      i_matnr                    = matnr
      i_in_me                    = entry_uom
      i_out_me                   = out_uom
      i_menge                    = quantity
   IMPORTING
     E_MENGE                     = fp_l_v_quant
   EXCEPTIONS
     ERROR_IN_APPLICATION       = 1
     ERROR                      = 2
     OTHERS                     = 3.
IF sy-subrc <> 0.
          give error message here
   ENDIF.
bcoz in ur program somewhere the quantities etc are compared and there units may be different... so that is why it is showing such error. so just convert convert the quantity in the same unit .
regards
rahul
Edited by: RAHUL SHARMA on Jun 17, 2009 9:31 AM

Decimal Points for Unit of Measurement

Hi all
For doing service entry in the QTY field can we put the value upto six decimal for any unit.
in customisation for Unit of measurement can we configure this thing putting decimal places - six or is there any other setting is required
Please help
Thanks in advance
Rajesh

Hi,
Yes in customisation for Unit of measurement you can customize it,
but it will be valid whenver you use this UOM in the system.
There is one thing also you can do
The Quantity fields decimal points in service entry is by default 3 digits ,
so to use 1,123456 quantity for lets say price 10 $
you can multiply both sides with 1000
i mean
use 1123,456 for 10000 $
just an idea
Regards
Hope it helps

HELP Make Settings for Units of Measurement for Monitoring of Consumption

Hello All:
I just cant' define an unit of measure to stablish consumption calculation. I know how to make all the other settings, but I just can't stablish the unit of measure to use in there.
Could please somebody gime this explanation ? Step by step ?
I've read that are preconfigured units of measure for examplo MPG miles per gallon US but I will use Kilometers per litre.
I want to know how to create this unit
how to link it with an existing SI group
So I can use it in the step Make Settings for Units of Measurement for Monitoring of Consumption
thanks in advance
Luis Henrique

Dear Luis,
Please use CUNI t code for creating unit of measurement. Please follow any exist Unit of measurement and replicate the same. This is a configuration so will have transport requirement
Regards
Gajesh

Change for Unit of measure in condition master

Similar Messages

Maybe you are looking for