Change GDM language in Gnome3 and add a Second Language to the List

Hello Everyone,
I have always used this order in my language list in Gnome or KDE : Portuguese, French, English.
But since the update of Gnome 3.2.1, I have problems defining the language, on my locale.gen I got only those 3 languages activated. But my Gnome3 Language List show me this :
Chinese
Espanish
English
English UK
Portuguese
With no chances of adding french (or it will replace the portuguese language and my system will be in French), If I remove the Portuguese language from the gnome list, then my system will be in chinese, english etc...
Even GDM have the same error, the problem is, GDM only show me the English language with no chances to change it..
How can I change this ?
Thank in Advance,
Luis Da Costa

It's a late answer, but you can put quite whatever you want in /etc/locale.conf, depending on your needs.
As you can see here https://wiki.archlinux.org/index.php/Co … ide_locale, you can only set LANG and the other LC_* variables will be set based on this. But you can also tweak a little bit the LC_* variables if you know what you're doing.
Set [SOLVED] if your problem is fixed

Similar Messages

  • I've got remember passwords activated but have changed one of my passwords and had to remove it from the list. It's not offering the option to remember the password for this site any more. help!

    I've had this happen on a couple of sites where I've changed passwords. It doesn't offer to remember the new password whether I login when that side is still on the list of those with saved passwords, or whether I delete that site from the 'saved passwords' list first. It just...doesn't offer the option to save the password. How can I fix this???

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    *You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    *To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"
    Some sites like PayPal and bank sites use autocomplete="off" to prevent Firefox from saving and filling in the name and the password.
    If a site uses autocomplete="off" then look at this article for a bookmarklet to remove that autocomplete attribute and Firefox will offer to store the name and password.
    * http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
    * http://kb.mozillazine.org/Password_Manager
    * http://en.wikipedia.org/wiki/Bookmarklet

  • I have changed settings on my email account with my provider, but in order to activate the address they instructed me to delete my account and add a new account with the same email address. Will this delete my all my email history? Any advise please?

    I have an OS X 10.6.8 and have had problems with my mail. I have changed my account settings with my mail provider, but they suggest I now delete my account and add a new account with the same email address. Will this delete my email history? Can anyone please advise?

    I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?

  • I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • If I go to PS and add layers can I bring the photo with layers back to Lightroom?

    If I go to PS and add layers can I bring the photo with layers back to Lightroom?

    JoeKostoss wrote:
    This is more complicated than I expected:  I had to go back to LR to check what I did previously. Here is what I found.  I hope this helps to explain what can be done.  You can have both layers and LR adjustments; you just cannot see the layers in LR nor can you see the LR adjustments in PS.  The good news is that they are both there and can be changed as needed.
    I have a photo (Raw) of a blue jay sitting on a branch with the background out of focus.
    I made many of the usual LR edits such as exposure, contrast, whites, blacks, sharpening, etc.
    I wanted to print it as a Birthday Card so I sent it to PSCC 2014 as a smart object.
    In PS, I added a type layer "Happy Birthday"
    Back in LR, I now have a psd Happy Birthday file stacked with the original raw file.
    Fine and as yet, no ADDITIONAL LR edits AFTER rendering right?
    I made some LR adjustments to the psd file such as crop to a different aspect ratio and add a vignette.
    I printed the psd file on a folded card.
    So far so good, you're still in LR. LR can take the new edits made there AND the layers and spit out a print. Nothing new or special here.
    Later I wanted to use that same image as a anniversary card.
    I told LR to edit that same psd file in PSCC 2014, this time not a smart object, but selecting "Edit Original".
    You got your original layered file. Nothing new or special here.
    PS opened with the "Happy Birthday" type layer intact and with the smart object background layer.  Of  course, the LR edits, crop and vignette on the psd file were not visible in PS.
    Because they don't exist there! They will when you render them.
    I clicked the eye of the Happy Birthday to render it invisible.
    I added a new "Happy Anniversary" type layer.
    Saved the new revised psd file and returned to LR.
    In LR, I still have only 1 psd file stacked with the original raw file, but now it says Happy Anniversary. Note: sometimes it may take a few moments for the new PS edits to appear.  By selecting another image and then reselect this psd file tends to speed this rendering of the new image.
    So where in all this is the LR edits you produce AFTER up created the layers after opening the layered doc in PS?
    I now have a new card ready to print just as before with all the LR edits originally made on the birthday card including the LR edits, crop and vignette made on the original psd file.
    And as far as I can tell, all those edits were applied in PS AFTER rendering.
    If I send that psd file a third time to PS, I still have the smart object layer, and both type layers.  I can add a 3rd type layer "Happy Easter" if I so desire and return to LR.
    Again, the crop and vignette are seen in the one psd file in LR.
    So...yes, I can have both layers AND LR adjustments including the original raw adjustments through the smart object background.
    No, you have a layered file and you have instructions but the layered file isn't rendered with those instructions and doing so would flatten the results.

  • I am using photos . I add a camera and make my photos slide in.  How do I add a second behavior to the photo to make it slide out.  I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

    I am using photos in Motion 5.  I add a camera and make my photo slide in.  How do i add a second behavior to the photo to make it slide out?  I want the photo to hold for a few seconds in between sliding in and sliding out.  When I am trying to do this  I am not getting the photo to hold, i am making one continuous motion which I do not want.
    Thanks

    Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

  • Is there a way to save an image file as a jpeg and add -web or -print to the file name?

    I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name.  This way I can easily see which files are lower resolution for web posting or high resolution for printing.

    Jason,
    I helped somebody do a very similar thing about a week ago.
    The trick is to use the Batch command's ability to construct a file name.
    Tell the batch to append, e.g. "-x" without quotes, to the name of each saved file.
    The batch runs an Action which does a save as JPEG, resize image, add logo, save as JPEG, then close document.
    The output is "<document name>-x.jpg" and "<document name>-x-x.jpeg".
    Then use Windows Explorer to rename "*-x-x.jpg" to "*-print.jpg".
    Then rename "*-x.jpg" to "*-web.jpg".
    See http://forums.adobe.com/thread/1038992?start=32
    The name construction that I used there was just an "x" appended to the document name. Use whatever you like. Also juliew subsequently referred to the method as a "double-batch" run, although it is not. One run of the batch will output two JPEGs for each input document.
    I hope the disagreements in that thread don't cause too much disruption.
    If you want, the Batch command itself can be recorded in another Action which would store the parameters of the batch, then you could run that Action anytime without having to set up the details of the batch each time. It would always output to one specific folder, though.

  • I have a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder app. There are also no "calendar" and "add an event" bottons on the Calendar App. Why?

    I just bought a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder App. There are also no  "calendar" and "add an event" buttons on the Calendar App. Why? Is there a way to add either a reminder or an event?

    For the reminders app - just tap on an open space on the ruled paper window under the heading in order to create a new reminder. Or tap on the + sign in the upper right corner of the app. You do not have the + sign on the app?
    For the calendars app to go Settings>iCloud>Calendars>On. Toggle the setting on and off and the + sign should appear in the lower right corner of the calendars app. Tap the + sign to create a new event.

  • I have several folders setup in my Safari.  However, when I try to add a website to them, it never appears.  When I add a folder and add a website to it, the website appears.  Help?

    I have several folders setup in my Safari.  However, when I try to add a website to them, it never appears.  When I add a folder and add a website to it, the website appears.  Help?

    I thank you for the response.  Apple does some assinine things sometimes and this is one of them.  Ask the planet the difference between a movie and a home video and with the exception of Apple, you'd get 100% consenus on the what difference is.  A home video is something that I shoot, like my kids birthday party.  A movie is something I urchased either via download or a DVD that I ripped.  Unbelievable!   The fact that Apple has chosen not to distinguish based upon which folder I tell it is Movies and which folder is Home Videos is really hard to fathom - sounds like something Windows would do. I find it funny that in my iTunes movies sub-section of the movies section, the movie icons have a cloud icon in upper right corner to distinguish it as bought from Apple iTunes versus no cloud icon for movies that I have ripped - so the distintion was already made and clearly visible.  Now - everything just defaults to "home videos" if I try to import a new ripped DVD - why even bother to have this distinction on the iTunes bar?  WOW!
    As for your direction, I do not understand what you are telling me - what Media Kind and what Options tab are you referring to?  I see no Options tab in iTunes.  Right licking on the movie icon does not yield media kind or options as well.  Gping to the source file does not yield these options either.
    Thanks again for your help.
    Clay

  • I need to find all XML elements and add a line break to the text of each of them

    I need to find all XML elements and add a line break to the text of each of them.
    Is this possible with a script?

    I need to go from this ...
    to this...
    but looking for the XML elements (not paragraphs) and then adding text ...
    Thanks for your attention !!!

  • How do I add a new font to the list?

    In "Tools/Options/Content/Advanced" how do I add a new font to the list? I have "Comic Sans MS" listed for one of the options, but the drop-down menu does not contain that option, so I can't select it for another font option.

    Thanks for your reply.
    As to your question: No, of course I wouldn't scroll down, it's in alphabetical order, so why would "C" for Comic Sans MS be anywhere but between B and D on the list?
    Now a question for you: If person or group was going to alphabetize a list and then break it down into sublists, why would he, she, they not include headers for each portion and maybe even indent each font name, so a person might have a chance of getting the drift?
    Also, how do you add new fonts to the list?

  • Question about free down loading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns if I down load Mavericks then what will happen to Bangla

    Question about free downloading Mavericks. On checking Mavericks before downloading that there are no Bangla language in the list. I occasionally use Bangla in my present Mountain Lion. My concerns is, if I download Mavericks then what will happen to Bangla language in mountain lion? Samar Laha

    No reason to be embarassed. You are not alone.
    You will need an external drive. If you have a Time Machine drive without enough disk space you can create the clone there however it's advised that you keep your Time Machine and clone on separate drives. If the drive dies you loose both types of backup.
    Download and install the clone software. Everyone has their favorite. These are the two most common applications used. I prefer SuperDuper because of it's simplicity in setting up. It's also free for the first clone where with CCC you have to give a Credit Card then cancel if you do not want to keep.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html
    Select your drive in the To popup. Click on Copy Now. That's it.
    Yes, it really is that simple....

  • I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

    I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

    You should be able to find Firefox by searching for it in the Android market on the device.

  • Hi I do not want iTunes to open up automatically when I turn on my macbook pro.  I tried going to System Preferences Users and Groups Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop.

    Hi I do not want iTunes to open up automatically when I turn on my macbook pro.  I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?

    Hi r,
    Make sure you close iTunes before shutdown.  And you're quite welcome.

  • How do I transfer my checked songs from one computer to another - tried exporting library playlist etc but no luck! Please help! I have 26,000 songs - 17,000 are selected and I can't run down the list on my new computer and re-check 17,000 songs! Thanks!

    How do I transfer my checked songs from one computer to another - tried exporting library playlist etc but no luck! Please help! I have 26,000 songs - 17,000 are selected and I can't run down the list on my new computer and re-check 17,000 songs! Thanks!

    Make a smart playlist of your whole library but only checked songs - #4 on  http://support.apple.com/kb/ht1801
    Highlight all files in that playlist, then drag to the other drive.  This isn't preserving any playlists or whatever, just copying files from one drive to another.
    You might want to delete the smart playlist this once you are done because it will probably gobble up resources with that many files.

Maybe you are looking for

  • Delete an uploaded file (in custom table) from a report

    Hi, I have a report of uploaded files (the files are saved in my own table, not in APEX_APPLICATION_FILES) - I'd like to add a delete link to each file in my report so that the user can delete a particular file. How do I go about doing this? Thanks.

  • Payment via APP

    Hi Experts: I am doing test in testing server and facing an issue in running F110. My issue is there are 15 invoices for a vendor , when system posts payment for them it makes single payment for them. This is wrong because we have to assign checks in

  • Default class map is dropping all Packets

    Hello I have a Cisco 871 router that used to have Access list based security. now I am trying the ZBFW for the first time.  I thought I had a pretty good program until I found all my traffic was getting dropped. This is my first stab at ZBFWs and I a

  • What tools are needed to create a Flex app?

    Which tool do I need to develop a Flex app? Is the Adobe Flex builder really needed? Are there any freeware products which allow me to implement Flex as well? Peter

  • As a Seller, how can I hold a payment until customer information is verified?

    Hello, I am going to be taking payments from students for software online. I only want to sell to students and need to verify their information before processing their payment. My current order process has me taking payment and the information at the