Change History of Material master classification data

Dear all.
How can we see the change history of the Material master classification data.
Whether any standard report exists which can give this Change History data or whether we can find from  any tables?
Please let me know your thoughts on this
Regards
Shyam

changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
change history for classification is only stored if you activated this.
if  it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system
it has instruction how to active it.

Similar Messages

  • Change documents of material master classification class type 001 and 300

    Dear guru ,
    I want to see the history of change documents of material master classification using MM02.
    The system allow to see the history only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    I must do some settings or the function for these class type arenu2019t available ?
    Thanks.

    Dear ,
    changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    Thanks.

  • View document in material master, Basic data 2 screen?

    Hello gurus,
    How to view a DIR assigned to material master - basic data 2?
    According to help.sap.com:
    Additional Function for Material Master Record:
    In Customizing for the Material Master, you can define a standard document type by choosing Make Global Settings.
    -  Done this: assigned document type needed, created a DIR with that type and assigned it to a given material
    Documents of this standard document type are displayed in the material master record, in the Basic data 2 view (Extras ® Document data).
    - Information of the DIR can be seen in the main screen, no path Extras --> Document data (I know DIRs are shown behind menu path Additional data --> Documents)
    You can display the original application files of a document (for example, an engineering/design drawing) directly from the object (for example, material) using a display application (viewer).
    PROBLEM starts here: no icon or button to click in order to view the document although the help states so.
    Any idea what should be done? Should I install a software of some sort to view? Assign it somehow with SAP? The document type here is doc (MS Word), so nothing special.
    Any advice is highly appreciated.
    BR,
    Pipsa

    Hello Sam,
    Sorry, I think I described the problem inaccurately.
    I could see the document already but for that I must follow the path Additional data --> Document data.
    My core question was: Is there a means to allow a user to display the document directly in the screen Basic data 2 since system creates a new subscreen called Design documents assigned anyway?
    It seems that the design documents assigned is for information purposes only. It would have been far better with usability to have the display icon in the main data.
    BR,
    Pipsa

  • Material Master Classification view

    Hi all,
    I have some doubt in Material Master Classification view.
    I want to know the Database Table name in which the field Class Number
    is  stored.
    I know that these tables are stored in the stucture ( RMCLF
    )  during creation of material master.
    Thanks in advance

    KLART is for Class Type & not for Class number ...
    also i need the table where i can see it ...
    Thanks in advance

  • Pricing based on Material Master Classification

    Hi Guru's,
    Can we have a pricing based on material master classification.
    Scenario: Material can have few characteristic. If we select few of the classification, this should influence pricing.
    Any idea on this, has anybody worked on this before?
    Thanks,
    Anil

    I am not sure about classification, might work with Variant Config.
    Alternatively, you can use split valuation if you don't have many characteristics.
    Hope this helps-

  • How to change currency in material master

    Could you please tell me multiple way to change currency in material master (mm02/mm02). Currency is under Costing2 tab in material master.
    Thanks..

    Hi,
    In <b>SPRO</b>, u can change the Cuurency.
    The Exchange Rate Type is used to store currency conversion rates for different purposes, in the R/3 System.
    If the R/3 System is to perform exchange rate conversions between a large number of different currencies, it can be simplified by specifying a base currency per particular exchange rate type. Then specify the exchange rates of all currencies in relation to the base currency for the exchange rate type concerned.
    In accordance with legal requirements, the base currency (EUR) must be defined as the From currency for currency conversions within the EMU (European Monetary Union). To do this, set the indicator in the field BCurr = From.
    <b>IMG->SAP Netweaver->General Settings->Currencies->Check Exchange Rate Types.</b>
    Regards,
    Padmam.

  • Inspection Characteristic in the material master (Classification)

    Dear All,
                  Please anyone tell me the cycle for maintaining the characteristics in the material master (classification tab) using batch classification.
    or give me a link for the same.
    regards,
    Rishabh

    Hi Rishab,
    Below links can help you
    http://help.sap.com/saphelp_470/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/content.htm
    http://scn.sap.com/thread/1783839
    http://help.sap.com/saphelp_470/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
    http://scn.sap.com/thread/2046143
    http://help.sap.com/saphelp_46c/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
    below steps will help
    Creation of Batch Class in (CL01)
    Assignment of above created classed characteristic to the Batch Class at the time of class creation. (CL01)
    Assignment of batch class to material master in classification view. (MM01)
    Creation of MIC with reference to above created Class characteristic (QS21)
    Creation of inspection plan with above MIC (QP01)
    Follow your business process cycle for creation of inspection lot
    Result recording and usage decision (QA32)
    You can see in MSC2N that batch characteristic will get updated.
    Best regards,
    Sharat

  • Could sap do mass craete/update for material master classification?

    Hi Expert,
      Now we craeted new classifcaiton for material master. It need be assigned to related many parts. May I query Could sap do mass craete/update for material master classification? How to do this ? 
    Thanks
    Alice

    Hi,
    Another option is using LSMW, please refer to below thread for more details:
    Classification view in MM01 with LSMW
    cheers,

  • VA01 change Delivery and Material Staging/Availability Date when vacation

    Hi Gurus,
    When I create a new order in VA01 for a day my company is on a period of vacation, I would like to change automatically the Material Staging/Availability Date and Delivery date to the last working day before vacations to avoid late deliveries.
    I am trying to find the custo point where to do it, but I don't find it. Do you have any suggestions?
    Thank you in advance.

    Thanks Andy,
    We maintain the factory calendar, so the problem is how the system is calculating this availability date.
    For example, if we have a week of vacation and we get an order for Wednesday, the system calculates the first day after this vacation week as the day we can deliver the product. In our example would be on next Monday.
    What we would like to do is that the system calculates as a delivery date the last working day before the vacation week, in our example would be on the previous Friday. So then we can avoid those late deliveries we are having now.
    I don't know how or where to customize that.
    I accept any suggestions.

  • We can´t change the class in Material Master classification Tab (MM02)

    When i trying to delete the class in the Classification tab in PRD System, it triggers the following message
    'Assignment (# material) (classname) can not be deleted' because If you use classification data for selection of components of the BOM. Or if the material still has lots that are classified.
    But in QAS System it is possible to delete the class from Classification tab.
    Can you explain me, why it works in QAS and not in PRD?

    To delete the batch class  from your material, you will need  to first archive the batch (object MM_SPSTOCK).  Once the
    batch are archived and deleted from the system, you may still have to run program RCCLZUOB.  This program looks for objects which are still incorrectly assigned to classes.  First run the program in Test mode (Delete flag is NOT set).
    Then you can set the Delete flag to delete the assignments.  Once the assignments are deleted, you should be allowed to delete the Class assignment in MM02.  You must save the material and then go back in change mode to make a new class assignment.
    Also review SAP note 113091.

  • Batch Determination in SD - Need for Material Master Classification View

    Hi!
    Is it mandatory to have the classification view of the material maintained to enable expiry date based batch determination at delivery creation?
    I have configured BD for the delivery. When testing with a material for which the classification view is maintained, the batch is determined. When testing with a material for which the classification view is <b>not</b> maintained, the batch is not determined.
    Appreciate that this may seem like a strange question given what the testing shows but I am working with a colleague who is adamant that the classification view on the material master is not required.
    Any casting votes would be much appreciated and rewarded accordingly. Thanks, Duncan

    Classification of batches is mandatory if you want to use the batch determination feature.
    source: http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm

  • Change number in material master required steps to use

    Hi All.
    Thanks in advance sap  mm dudes.
    Need steps in sap mm material master change number.
    creation of change number  and usage  of change number
    Display of list of changes.
    Regards.
    parameshwar

    Dear Parameshwar,
    1.I assume you have created a change number without release key in CC01.
    2.In CC02,for the same change number goto object types and include the check box against material for the first 3 check box and
    save the change number.
    3.Now check in MM02 for any material master changes or I would suggest you to create a new change number with valid from
    date as current date,include the settings for material under object types and then check in MM02.
    Check and revert.
    Regards
    Mangalraj.S

  • Re: Changes in the material master.

    Hi guru's,
    The vendor supplies the material 1 box which consists of 20 pieces, we known that in the material master the unit of measure for alternate UoM is maintained as 10 pieces (in additional data tab). If I make changes as the receipt from vendor as 20 pieces instead of 10 pieces already maintained, what are the consequences I face. its ur pl.
    thanks
    tuljasingh.

    Hi,
    Once you make changes in material master ( from 10 to 20) then when you make the GR then system will make GR for 20 quantities (After makeing changes in MM you have to again change the conversion in PO in quantities tab). 
    So after making GR, quantities & stock value will be updated as per data mentoned in PO conversion.
    If you make any new PO then system will pick bydefaut the conversion in PO from the material master.(i.e. 20 qty for 1 pc)
    Regards,
    Umesh Agrawal
    Edited by: Umesh Agrawal on Dec 8, 2008 10:59 AM

  • Not able to change UOM in material master for a material

    Hi all ,
    I have a issue with changing of the UOM in the material master , IN MMO2  after changing the UOM , in Display error , its showing the error as : The base unit of
                                         The reasons for
                                         Manual  reservation
                                         Reserv.No   , Item - No data
                                         Purchase order  - 30017056  , Item 1 - 1
    There is no stock in the previous as well as current period , and deleted the PR , still i am not able to change
    Please help urgently
    Thanks in Advance
    Neha

    Hi Satyajit,
    Please look at OSS  Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
    Since  Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
    We may have same material in different IMs with different  plants. Therefore changes of the basic view fields are then contained in multiple IMs.  SAP advises to have a larger IM or sequential activation of IMs.
    I hope this will  help you .
    Regards
    Datta

  • Disabling Material Master Classification

    Hello,
    We have a requirement where we will disable the user going into material classification screen while creating or changing the material master based on authorization object. As we know, the material master transaction will switch to classification transactions in this process. We looked into various user exits and enhancement spots where we can put our code, but we were not successful. We anticipate your help on this issue.
    Thanks in advance,
    Christian

    Hi Christian,
    Your requirement is to restrict certain users to change or create the classification in material master. (If i have understood it correctly then...) the solution is to control it through authorizations.
    The Authorization object is M_MATE_STA. If the field STATM in this object has a value C included then those profiles/users will have authorization for Classification view and others wont.
    Your SAP security Admin should be able to hel[p you with this. By doing so you would have no need to control it using User exits or enhancements.
    Regards,
    Kathir

Maybe you are looking for

  • Settings for SCE in CRM 5.0

    Hi I am using CRM 5.0 in our environment. We have made the settings for VMC, and it is now running fine. After this what settings do I need to make for SCE. As per documentation available, RFC connections are not required for SPE, SCE or TTE. But whe

  • To view "Daily ID Administrators Activity" & "Dormant Accounts"

    Dear Hyperion Users, I am looking out for the below ones on Hyperion 9.3.1. 1. Daily ID Administrators Activity [User maintenance, to track any changes on user's access, etc] 2. Dormant Accounts - Account which are not used or which are idle for cert

  • Fonts in textarea

    I have problems changing fonts in my textarea.. I can change the size and change to bold.. Any1 know what to do? I use textArea.append(string); to send strings.

  • Skype Cant Connect! HELP

    Hello, I Do not have and Firewall, or AV programs on my PC I Havent Done anything besides try to uninstall and re-install skype. I keep getting the error "skype cant connect" Anyone got an Idea of what i can do? Windows 7 64x Bit

  • Filetring and Variables in the multiple tab Template result

    Gurus! I have a strange problem in one of my template. I have four queries and four tabs for each in one of my Web Template. I use a jump command in between queries to switch tabs . Its RRI= X, and when I do this the executed result I have a strange