Change In Clock Time

Hello All,
We are working in UK. We have SAP for a system running on ECC6 on AIX with TL07 SP1, and another running on 4.7 on AIX with TL08 SP3. We have to plan to change the clock by this month end. Last time we had an issue for the same and were getting the LARGE TIME DIFFERENCE dumps.
We had to apply SP2 for the 4.7 system as it was running on TL07 SP1. Now, I would like to know if we face any problem in changing the time. Please help.
Thanks,
Nick.S

- your system should not travel backwards in time
- the time should be consistent across your environment
Best practice is to stop the system during the time conversion.
Have a look at these notes:
[102088 - Reducing downtime when changing from summer to winter time|https://service.sap.com/sap/support/notes/102088]
[398374 - Problems when converting summer time <-> winter time|https://service.sap.com/sap/support/notes/398374]
Best regards, Michael

Similar Messages

Random Clock Time and Date Changes

My clock time and date changes randomly. I have reset the iPhone and updated its software but it still changes. Can anyone help?

That just happened to me too! It started yesterday April 27 and did it today too. I think it changes around like 1pm-1:15pm. In order to get it to change back to the right time, I just turn off my phone then turn it back on. But that doesn't fix the problem. I don't know why its doing this! :[

Clock time changes with switch reload

Hi...
I am facing problem of Clock time modifies to 1st March whicle 2900 series or 3500xl switches reloads.My IOS is c2950-c3h2s-mz.120-5.3.WC.1.I need to set the clock again every time it reload or poercycled.We have 173 Switches installed in Campus Area Network.It is difficult to check time & change it for every switch.Kidly suggest me solution.
With regards,
Shailen Mehta

Hi Shailen
Would suggest to go for secured NTP configuration in ur catalyst switches to avoid reentering the time after every reset.
do have a look into this link which will take you to configure NTP in ur boxes
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a008007e8bf.html#xtocid13
regds

Can't change the clock?!

We just received a new HD Set Top Box. After a successful installation, I realized that the clock displayed, as well as the clock for the menu and guide are incorrect. The time is off by 3 hours not just a daylight savings glitch. Anyway all the info I have found says you can not change the clock, and that there is no need to, but I think in this case I need to. Help, suggestions please?!

if the clock display is wrong, then it's not properly activated. you'll want to do chat support so verizon can fix that, or call them. tech support is 24/7

DMP-4400G How can I change the local time

Hi,
Recently I installed DMS 5.0.2 and DMP-4400G for Digital Signage. Now I am running a Flash application that is embedded into a HTML page, but sometimes the DMP does not show the content of the flash, the LCD shows a temporary error; this error never occurs when I use a standard PC with any Internet browser to display the same content. The webmaster says that DMP does not have an updated time and date. Do you know how to change the local time and date of the DMP-4400G.
Thanks for your help.

Jhon,
There are couple of things...
1. The DMP 4400G has a internal clock but at this time there is no way to change the date & time on the DMP 4400G.
What does the date & time have to do with the Flash Content anyway?
2. What version & type of Flash is being used for this embedded Flash content? Is the correct version selected & configured on the DMP?
Cheers!
T.

I can't change my alarm time settings

I own a 5th generation iPod nano and I regularly use the alarm clock and it works fine until now.
When I set a new alarm and choose the exact time I want it to ring, I go back to the alarm main menu only to find out that the time I selected has changed. Every time I go back to the time settings and correct the time I want, the final saved time is different.
I already tried to reset my ipod twice, I even restored it but the issue remains.
What should I do ?

I'm on Mac OSX version 10.5.8. Processor: 2.4GHz Intel Core 2 Duo. Memory: 4GB 667 MHz DDR2 SDRAM
Not sure how to check which version of flash I have but I updated it to the latest 2 nights ago. But the problem was still there prior to that. I thought updating would solve it but apparently not.
Been trying to stream these and others like it. The message usually pops up within the first minute or so:
http://www.tudou.com/programs/view/1DecdNX8v0Y/
http://www.tudou.com/programs/view/YZk2pXmF8wA/
It's also been popping up on Dictionary.com for weeks now, after I finish doing the crossword puzzle on it.
Thanks for trying to help.

Report governor? (CPU time, clock time, # rows, etc?)

Is there any sort of report "governor" function available in the
Reports Server or 9iAS (Portal) interface to the reports server
that would let me stop a report once it had used up a certain
amount of database CPU time or simply ran for too long ("wall
clock time")?
For certain times of the night (during data loads, etc.), I need
to be able to restrict some or all of our users from taking over
the CPU by running too many reports concurrently, reports with
too broad a set of parameters, etc. The SRW.SET_MAXROW
procedure might help a bit, but ideally I'd like to be able to
control this without having to change each report. (Also, I'd
like to be able to control this on a user-by-user, group-by-
group or time-of-day basis.)
TIA for any suggestions anyone can offer!
- Bill

hello,
there is no feature in oracle reports but you might look into
the database features, they might have something like that.
regards,
the oracle reports team --pw

Java Thread.sleep(timeout) is influenced by changes to System time on Linux

Java Thread.sleep(timeout) is influenced by changes to System time on Linux
bugId : 6311057
I encountered this problem in redhat6/ jdk 1.6

890651 wrote:
Java Thread.sleep(timeout) is influenced by changes to System time on Linux
bugId : 6311057
I encountered this problem in redhat6/ jdk 1.6At least half the time I use it, I'd want it to be, the other half I wouldn't care.
What are you doing with it where this might be a problem?
Changing the system clock abruptly can cause all kinds of problems with your system anyway, because various background activities etc. often depend on file dates. Wherever possible use the "skew" method to adjust your system clock, rather than just plonking in a new value, especially if you are setting the clock backwards.

QuickWeb Clock Time

Pavilion G4-1229dx, Windows 7 64 bit
When the Windows clock is set to the correct local time, the QuickWeb time is too hours fast.
To get QuickWeb clock to the same time as the Windows clock, I must set the QuickWeb clock to use a time zone two hours earliert than my local time zone.
This work around does the job but I don't think it should work that way. I've tried changing the Windows internet sync location, tried manually settiing one clock, both clocks, and not manually setting either clock; the Bios time is correct. Nothing helps. I've run out of ideas.
Any suggestions for getting the QuickWeb clock and the Windows clock on the same time zone showing the correct local time?
I looked at some HP laptops on display in stores and they have the same two hour error.
Thanks,
Rich

HP is offering to replace or refund the price paid for the laptop as they are unable to fix the issue nor have any matching replacement....
All those having HP laptops, its a good opportunity to check your Quick web clock time and if it doesnt match Windows clock time (which i am 100% sure will not), then approach HP Support and escalate for replacement / refund....irrespective of how old your machine is this issue is inherent problem in all HP machines for which you should be duly compensated
Dont miss this chance of recovering the value for money paid to HP
Cheers!
Tim

Syncing IPhone changes my clock and timezone

Every time I sync my iPhone with my computer, it will change my clock and the timezone. I re-checked every setting on the iPhone and iTunes and everything seems fine. What can I do so this doesn't happen again? Because it's very annoying to change back the clock every time or use it with the wrong time. Granted, the difference is just one hour forward, but still...

i am having the same problem. iphone 3G 3.1.3 with itunes 10 same problem.. how did you solve this problem?

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

Clock/time incorrect after upgrade to bootcamp 5 running windows 8-64

Since I did the upgrade to bootcamp 5 running windows 8-64, (which solved all the previous problems), the clock/time changes by itself to be off by hours frequently throughout the day.

I'd suggest you upgrade to OSB10.4.0.1.0 release.
Webtool taking ages is probably related to some other OS issue, check /var/log/messages and whatever and check your DNS settings are all correct.
What about obtool commands, are they also slow?
Thanks
Rich

IPhone 4 changes the clock automatically while i was disabling it!!

My iPhone 4 is changing the clock automatically and i adjust it an hour earlier because my country decided not to change the time to summer so i have to make it an hour earlier.. anyway when i adjust it manually it turn back automatically to the original time and i dont know what to do :S:S any help??

Quit out of iTunes
Go to the hosts file. For Mac OS X this is located at: /etc/hosts or /private/etc/hosts and in Windows it is located at: c:\windows\system32\drivers\etc\hosts
Open the hosts file with Administrative privileges so that changes can be made and saved (eg: sudo nano /etc/hosts)
Look for a line that resembles something like this:
74.208.10.249 gs.apple.com
Put a # in front of that to comment it out, making it now look like this:
# 74.208.10.249 gs.apple.com
Save the hosts file
Flush DNS cache and restart iTunes
To flush the DNS cache: Open Terminal and type dscacheutil -flushcache <Return>

My weather doesn't changes according to time

My weather doesn't changes according to time as after 12:00 am it will remain the same day

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Also, the US daylight saving time starts tonight. Sometimes the iOS has problems around DST

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

Change In Clock Time

Similar Messages

Maybe you are looking for