Change multiprovider which is assigned to aggregation level

Hi guys,
is there a easy way to change multiprovider which is assigned to aggregation level?
We have already some queries, filters and functions on the aggregation level. So we cant simply delete it and create another one. I just want to change multiprovider definition under the aggregation level as we decided to change naming convention for multiproviders.
Thanks in advance.
Zafer

Hi,
Aggregation levels are built on top of specific multiprovider. And you can not change the technical name of multiprovider.
But you can try following approach,
1) Create copy of current multiprovider, and then create aggregation level on top of that multiprovider.
2) Now try to copy the queries from source aggregation level to target using 'RSZC' transaction.
I am not sure whether this will work or not, but you can just give a try.
Regards,
Durgesh.

Similar Messages

  • MultiCube over IP Aggregation Level Question

    Hi, I have a MultiProvider over an IP Aggregation Level and a Real InfoCube.  This was all handed down to me from previous development.  The Aggregatation Level  has the same level of detail as the planning infocube it is based on.
    Is there any reason for the MultiProvider to be over the Aggregation Level instead of the actual planning infocube?
    I guess I'm reading that a multiprovider over an aggregation level is for planning only and not reporting?  If this is true then do I need a multicube for planning and a separate multicube for reporting using the actual planning infocube?
    Thanks for any clarity you can offer...

    Wouldn't this modeling work as well for planning?  I mean while they are planning values they might want to see actual values as well to help in decision making?
    Thanks!

  • How To Delete Aggregation Level

    Hi Experts,
    When i am installing the business content some  Aggregation Levels installed(because i selected grouping as before and after ), Now i  want to delete the those Aggregation Levels.
    but in my system RSPLAN T-code is not working(after going to RSPLAN when i click on start modeler or wized its showing page cannot be displayed in IE), in my project we doesn't Require IP, so its not configured.
    Please sugget me how can i delete those Aggregation levels.
    Thanks,
    Chandra

    Hi Andrey,
    Thanks for u r information by using this function module i deleted all aggregation levels except two aggregation levels,
    but when i am trying to delete 
    0INM_A05, 0INM_A03  these two aggregation levels its giving dump, i deleted all the queries which are in these aggregation level even though unable to delete these aggregation levels.
    Please sugget solution.
    Thanks,
    Chandra

  • Problems creating aggregation levels over a Multiprovider

    Hi experts,
    When I create a aggregation level over a multiprovider the system returns an error " Infoprovider XX cannot be used for definition". I have read other threads with the same question and its solutions. I have checked my system and all is correct. The multiprovider has linked five infoproviders, one as real time.
    Any Idea?
    Please, it is very urgent to solve this.
    Thanks a lot in advance.

    Hi Mayank and Ravi,
    I have checked the identification of chars and kf. The realtime cube has five chars and a kf. All of them are assigned with all cubes witch are linked with the multiprovider.
    I have tried by removing the realtime cube and the system shows the same error message. I have also tried by reactivating the cubes and multicube.
    Any idea?
    Thanks.

  • Aggregation level on single level basis or multiprovider

    Hello,
    we use IP 7.0 and have a planning cube for CO-PA data, as well as a multiprovider combining the actual cube and the planning cube for COPA data. We need to implement a planning tool in which planning simple planning functions are needed on the single basis (copy, revaluation, multiply,manual planning ...) as well as on the multi-provider (top-down with reference data).
    -> on which level(s) should we define the aggregation level? Do we need to define it on the multiprovider (in order to do the top-down) or can we split it up (single level and multi-provider) and define a workbook with a manual planning function on the single level AND including the top-down based on the multiprovider?
    thanks
    Dries

    I agree with Gregor,
    I think it is more logical to configure your Aggregation Level on top of your Multi-Provider, especially since you already have a need to view ref data from Actuals to perform calculations on your Planned.  You can always restrict your 'simple' functions to the appropriate InfoProvider.
    As for the FOx question, you can always restrict to each InfoProvider when writing your FOx (either inside the FOx code or using the FOx conditions).
    Regards,
    Zane

  • Aggregation Level Vs Multiprovider

    Hi Folks,
    Can some one can explain me what makes to use Aggregation Levels as we have an option of building Read Input Queries on Multiprovider it self?
    Is it a mere performance issue or else thats the only way we need to go build a Input Query.
    Also can some one tell me how I should final Layout after I have designed a RI Query in Bex Designer. So far my understanding is to Execute that Query
    1. Bex Analyzer or else
    2. Go and hook this query by using WAD.
    What difference that really makes me in terms of functionalities between both layouts except for the Visual Feel might be different one in Excel and other on Web. Any major bottle necks here?
    I really appreciate any kind inputs here for my above concerns.
    Points will be assigned.
    Thanks in advance for every input on this.
    BI-IP Guest

    Ravi/Manyak,
    Thanks for your responses. I appreciate that and I understand that we cant build Input Ready Queries on regular Multiprovider.
    How to decide like whether we should go with Multiprovider or Aggr Level for building my Ready Input Queries.
    Ravi saying that it's when we want to do manipulations or else while using Planning Functions.
    I find BPS more easy to understand when seen with IP especially when I built Lay outs. Atleast in BPS we can feel on what we are building. But here in IP Iam getting Confused on how to build Rolling Forecast Layouts and also using Aggregate Levels/ Multiproviders. Iam saying this in general what my situaion is.
    Any comments for Knowledge Transfer will be highly appreciated.
    Thanks,
    BI-IP Guest

  • Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer

    Dear,
    After transport from a dev to prod system I get this message on the planning modeler :
    "System is not set to changeable - objects are not changeable
    Aggregation level ZFI_FINGL is locked by the Change and Transport Organizer"
    Do you know how to fix it ?
    Thanks in advance,
    Thibaut

    Hi,
    By default the planning modeller configuration is added to the standard BEx transport (if it is not saved in $TMP). If there is not one set up then create one in the admin workbench transport connection.
    If you don't use this, then you can add the objects you wish to change manually into a transport before you change them - this also works.
    Cheers
    Mark

  • Aggregation Level on Multiprovider

    Hi All,
    I have a planning function on aggregation level built on multiprovider.
    When I try to Execute the planning function,the report is throwing an error as below-
    *InfoProvider YF2_OTIFA is being used in manual planning or in a planning function. YF2_OTIFA is a MultiProvider or an aggregation level based on a MultiProvider. You are trying to create a data record for InfoProvider YF2MM_C1 but this InfoProvider is not contained in the MultiProvider.
    System Response
    The data record is invalid.
    Procedure
    Correct the entries in manual planning or check the parameterization of the planning function.*
    Any Inputs?
    regards,
    Rajendra

    Hi Einstein,
    Thanks for your valuable answer.
    And sorry for delayed responce.
    Yes you are right.I am using Web as front end and using data binding with query results.
    Can you pls elaborate what you mean by use Infoprovider as a condition in the planning function
    regards,
    Rajendra
    Edited by: Rajendra.Vmath on Jun 1, 2009 8:07 AM

  • Aggregation level  is locked by the Change and Transport Organizer

    Dear All,
                   I have created aggregation level in the planning cube and transported to Production from dev, Once i transported to production i am not able to change the aggregation level in Dev, and also aggregation level is Inactive.  Aggregation level YPNC2 is locked by the Change and Transport Organizer. Please suggest how to activate the aggregation level in Dev.
    Thanks
    Christopher

    Hi,
      Kindly check the following,
    1. Is your aggregation level transported properly to the production system ?
    2. Was your aggregation level active while you were including it in the transport request ?
    3. Did you properly include the aggregation level in the request?
    If you find that the answers of all the above questions is "YES", then there should not be any problem in your aggregation level.
    Hope this solves your issue, if not kindly get back to me.
    Regards,
    Balajee

  • Unable to create Aggregation level on Multiprovider

    Hello Experts,
    I am getting the following error when activating a newly created aggregation level on a certain Multiprovider.
    Error : Aggregation level B2MP01L02: InfoProvider 0COMP_CODE cannot be used for definition.
    0comp_code is a characteristic that I have included in a dimension of the Multiprovider. In the same dimension, i have another characteristic opcomp_code whose reference characteristic is also 0comp_code.
    Could this be the source of the error? There are already many queries built on the Multiprovider, I am reluctant in deleting opcomp_code and check the impact while activating the Agg level.
    Has anyone encountered this issue?
    Any help will be greatly appreciated.
    Thanks,
    Nitish.

    Hi Nitisch,
    it seems that you get message RSPLS192, cf. long text of the message.
    Not all multiproviders can be used as a basis for an aggregation level. The multiprovider has to contain at least one real-time InfoCube and not aggregation levels (aggregation levels cannot be nested).
    Regards,
    Gregor

  • Input-ready query and aggregation level or multiprovider

    Hi,
    is it true that input-ready querys can only be created based on an aggregation level and not a multiprovider?
    thanks.
    regards
    P.Rex

    Hi,
    Input Ready Queries can only be built on aggregation levels.
    If you want to create an input ready query on a multiprovider, first create an aggreagtion level on top of this multiprovider and build your query on this aggregation level.
    If you have any problems in getting the input readiness, you can always revert.
    Regards,
    Srinivas kamireddy.

  • Change Key Fig. on a aggregated level alowed ?

    Hello Gurus,
    is it possible to change Key Figures on a aggregated Level ?
    THNX

    Hi.
    What do you exactly mean ?
    You can add/remove KF from aggregation levels (KF should exist in infocube).
    You cant change KF in aggr level (I mean you can't change length or other properties of IO via aggr level).
    Regards.

  • What are steps followed in aggregation level  in multiprovider

    what are steps followed in aggregation level  in multiprovider

    I am kind of new too. But this site helped me to understand and deploy the example in weblogic.
    Hope it helps you.
    http://e-docs.bea.com/wls/docs81/webserv/example.html#1052582

  • Inactive aggregation levels

    Hi,
    I had to change a multiprovider. I activated it, and now the aggregation levels based on this multiprovider are all inactive. How to activate all in mass ?
    Quick answer appreciated.

    Hi,
    I understood from you post that, u have done some changes to a multi provider and activated it.so the cubes , on which the multiprovider is based are deactivated.
    If this is your question,
    the solution is, check the cubes , on which this multiprovider is built.
    Activate those cubes.
    Assign points if it helps....

  • Activate an Aggregation Level in Production

    Hi,
    Can anyone please assist me in activating an aggregation level in Production?
    Some of our aggregation levels are inactive and we can't transport them at the moment as we are busy with an upgrade in development.
    Your help would really be appreciated, as this is quite high priority at the moment.
    Thank you!
    Regards,
    Tanya

    Hi Shafi,
    We did do the investigation. The MultiProvider on which the Aggregation Level was built, was still active in the morning. We ran two queries from the MultiProvider, and the second one (for some reason) de-activated the one InfoCube in the MultiProvider.
    We did version comparisons to see what might have changed in the InfoCube or MultiProvider, but there was nothing. We re-activated both the InfoCube and MultiProvider with programs that are available in SE38 (RSDG_CUBE_ACTIVATE and RSDG_MPRO_ACTIVATE), but could not find a program to re-activate the aggregation levels (and the function module did not work).
    Thank you!
    Regards,
    Tanya

Maybe you are looking for

  • IPhone 6 is not recognized by AT&T Microcell (older Cisco version)

    I just discovered my new iPhone 6 is not connecting to my existing home AT&T Microcell.  This device worked just fine for the last three years with my old iPhones 4 & 5.  AT&T tech support had no immediate solution.  (The Voice-over-WiFi feature shou

  • My external HD refuses to be erased !!!

    My Lacie external hd refuses to be erased. I have tried ALL of the options in Disk utility - also partitioning, but all i get is " Unknown error: -20 " Erasing with the " 8Way random write format" seems to work; but it will LITERALLY take almost a wh

  • Applescript Ignoring Timeout

    Hi Guys, Long time listener, first time caller. I have cobbled this script together from other posts. It is designed to close all open applications with exceptions and rsync a directory to a removable drive. Unfortunately the script times out after s

  • IPod shutting down by itself on lock screen

    When starting my IPod it plays for a while and shuts down when the screen locks, also when pressing the lock button. I reset the device and updated to the latest version but still doesn't work. THanks.

  • HP DX2450 Microtower slow boot to POST screen.

    Hi all Product Name and Number: HP DX2450 Microtower PC Operating System: Windows 7 Pro 64bit When I power on the PC, it takes the computer roughly 20-30 seconds to get to the POST/HP menu screen.  After that, it boots into Windows 7 pretty quickly a