Change name of .xml file.

Can anyone help me?
Being new to podcasing and not realising that I only need one xml file even for multiple episodes I gave my file a specific name relating to the subject of my first episode. Realising my mistake I would like to re-name the .xml file, is that possible now that iTunes have already accepted my podcast?

Sure, just copy your old file over to the new URL.
Then edit the "old" copy and cram this into it:
http://www.apple.com/itunes/store/podcaststechspecs.html#_Toc526931687
So when Apple visits the old one, they find the new one.
You can also do the fancy 301 redirect (not 302) if you know what that means, or want to figure it out. It's an HTTP response code in the HTTP protocol to note that a document has "permanently moved"

Similar Messages

Changes in the xml file AFTER submitting to store

hi,
I recently added a Podcast for BMWGroup.com to the iTunes store, which hasn't been released yet.
What I want to know is, whether changes in the xml file, that i made AFTER submitting it will be taken over when the feeds are going to be released.
For example a different categorie or image..
and if not? how can i change categorie or image later? does it update from the xml?
does anyone know?
thx,
best regards,
oliver
thx,

Oliver:
The simple answer is yes. Any changes you make to your RSS feed file (xml file) will eventually be updated by ITMS. Usually ITMS updates feed changes within 24 hours. However, the most recent changes I made in my feed files took almost 8 days before ITMS refreshed my listing.
One issue is clear. If you make changes to your image file, there is a high probability that when ITMS updates your database record, your listing in ITMS will show the broken link image for awhile. I've changed my image file twice, and each time, my ITMS listing showed the broken link image. Eventually the new image shows up, but it does take a long time for this day and age.
Good luck!

Changing an existing XML-File

Hello everybody,
is there any way to change an existing xml file (adding an xml element, for example), without copy the hole file?
I've found kxml2 which can parse the xml files or build new xml files, but it doesn't support changing...
Thank you
Micha

Pradeep thank you for your response. it was helpful. However, I also found the responses to both my questions.
i. The null pointer exception was due to using a complex query I was using in the LOV query. I tried a simple query and that worked fine.
ii. For modifying the user defined attributes one can consult the following forum post:
OIM 11g - Change UDF Field Type form String to LOV
Thanks

Change MessageType name in xml file

Hi experts,
I have developed a receiver interface that creates an xml file and put it on an external server.
Now other side says that this tag:
<ns0:MT_MexElectronicInvoice_EDICOM xmlns:ns0="urn:Myfirm-EDICOM:MexElectronicInvoice">
is not correct, they want another description:
<ns0:MT_MexElectronicInvoice_myFirm xmlns:ns0="urn:Myfirm-EDICOM:MexElectronicInvoice">
My question is: is possible to change MessageType tag in xml file without changing the message type structure name in Integration Repository?
thanks
fabio

use another mapping which has the target MT as <ns0:MT_MexElectronicInvoice_myFirm xmlns:ns0="urn:Myfirm-EDICOM:MexElectronicInvoice">
Add this mapping after the original mapping in your interface/operation mapping.
This will be the easiest way to handle this requirement as you will only need to do a one to one mapping.
Another option will be to write a java mapping to do a simple replace function for the string <ns0:MT_MexElectronicInvoice_EDICOM xmlns:ns0="urn:Myfirm-EDICOM:MexElectronicInvoice"> to <ns0:MT_MexElectronicInvoice_myFirm xmlns:ns0="urn:Myfirm-EDICOM:MexElectronicInvoice">

Can we change the web.xml file name???????

can we change the name web.xml and struts-config.xml file to other name.....if yes, then how..........

you can change the name of struts-congig.xml file
and change the strut-config file name in web.xml also.
<web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
    <servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>And you also try rename the file web.xml and run the application and check what is happening...

Example of storing a prefix name space xml file in XML DB ?

I have lots of XML file pass to me with prefix name space all over the file. Is there any example of how to stored and retrieved this type of XML file to XML DB?
Example of the XML file:
<?xml version="1.0" encoding="UTF-8"?>
<ddms:Resource xmlns:ddms="http://metadata.dod.mil/mdr/ns/DDMS/1.3/" xmlns:ICISM="http://metadata.dod.mil/mdr/ns/DDMS/1.3"
     xmlns:gml="http://metadata.dod.mil/mdr/ns/DDMS/1.3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://metadata.dod.mil/mdr/ns/DDMS/1.3/ ../DDMS-v1_3_1033.xsd">
<ddms:identifier ddms:qualifier="http://metadata.dod.mil/mdr/ns/MDR/0.1/MDR.owl#URI"
          ddms:value="http://www.whitehouse.gov/news/releases/2005/06/20050621.html"/>
</ddms:Resource>

Hi
What is the error you get if you try to load the file ?
May be you have to change the schema location of the xsd to an absolute path in your exable it is relative
xsi:schemaLocation="http://metadata.dod.mil/mdr/ns/DDMS/1.3/ ../DDMS-v1_3_1033.xsd"
regards Patrick

How to get the column name and table name from xml file

I have one XML file, I generated xsd file from that xml file but the problem is i dont know table name and column name. So my question is how can I retrieve the data from that xml file?

Here's an example using binary XML storage (instead of Object-Relational storage as described in the article).
begin
dbms_xmlschema.registerSchema(
    schemaURL       => 'my_schema.xsd'
, schemaDoc       => xmltype(bfilename('TEST_DIR','my_schema.xsd'), nls_charset_id('AL32UTF8'))
, local           => true
, genTypes        => false
, genTables       => true
, enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS
, options         => dbms_xmlschema.REGISTER_BINARYXML
end;
genTables => true : means that a default schema-based XMLType table will be created during registration.
enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS : indicates that a repository resource conforming to the schema will be automatically stored in the default table.
If the schema is not annotated, the name of the default table is system-generated but derived from the root element name :
SQL> select table_name
2 from user_xml_tables
3 where xmlschema = 'my_schema.xsd'
4 and element_name = 'employee';
TABLE_NAME
employee1121_TAB
(warning : the name is case-sensitive)
To annotate the schema and control the naming, modify the content to :
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb">
<xs:element name="employee" xdb:defaultTable="EMPLOYEE_XML">
    <xs:complexType>
Next step : create a resource, or just directly insert an XML document into the table.
Example of creating a resource :
declare
res boolean;
doc xmltype := xmltype(
'<employee>
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>'
begin
res := dbms_xdb.CreateResource(
           abspath   => '/public/test.xml'
         , data      => doc
         , schemaurl => 'my_schema.xsd'
         , elem      => 'employee'
end;
The resource has to be schema-based so that the default storage mechanism is triggered.
It could also be achieved if the document possesses an xsi:noNamespaceSchemaLocation attribute :
SQL> declare
2
3    res boolean;
4    doc xmltype := xmltype(
5 '<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
6             xsi:noNamespaceSchemaLocation="my_schema.xsd">
7    <details>
8      <emp_id>1</emp_id>
9      <emp_name>SMITH</emp_name>
10      <emp_age>40</emp_age>
11      <emp_dept>10</emp_dept>
12    </details>
13   </employee>'
14   );
15
16 begin
17    res := dbms_xdb.CreateResource(
18             abspath   => '/public/test.xml'
19           , data      => doc
20           );
21 end;
22 /
PL/SQL procedure successfully completed
SQL> set long 5000
SQL> select * from "employee1121_TAB";
SYS_NC_ROWINFO$
<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceS
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>
Then use XMLTABLE to shred the XML into relational format :
SQL> select x.*
2 from "employee1121_TAB" t
3     , xmltable('/employee/details'
4         passing t.object_value
5         columns emp_id   integer      path 'emp_id'
6               , emp_name varchar2(30) path 'emp_name'
7       ) x
8 ;
                                 EMP_ID EMP_NAME
                                      1 SMITH

Wrong path changes in Itunes XML file

hi there,
My Itunes library (9.0.2) is stored locally on my macbook, although actual files are on a network attached storage that I access through AFP. This share is mounted automatically when the mac starts. Everything was working perfectly fine until a few days ago (no major change to the library or mac), when my iphone synchonization started to report impossible to read on the device files.
After a few more investigations, I pinpointed some of the missing files, which were not missing but were replaced by other files (absolutely not linked to my media files).
the <key>Location</key> in the xml file was, for example
<key>Location</key><string>file://localhost/Volumes/David/docs/Me%CC%81dias/src/elodie2.jpg</string>
where it should have been something like
<key>Location</key><string>file://localhost/Volumes/David/media/music/albums/Damien%20Rice/9/09%20-%20Accid ental%20Babies.mp3</string>
Does anyone have a clue about what went wrong and how to circumvent this in the future ?
Thanks in advance

Oliver:
The simple answer is yes. Any changes you make to your RSS feed file (xml file) will eventually be updated by ITMS. Usually ITMS updates feed changes within 24 hours. However, the most recent changes I made in my feed files took almost 8 days before ITMS refreshed my listing.
One issue is clear. If you make changes to your image file, there is a high probability that when ITMS updates your database record, your listing in ITMS will show the broken link image for awhile. I've changed my image file twice, and each time, my ITMS listing showed the broken link image. Eventually the new image shows up, but it does take a long time for this day and age.
Good luck!

Missing slide name in xml file

Before I upgrade from Captivate 5.5 to 7 I need to understand why - When I open the xml file to review the quiz results, I cannot find the slide name. When I give management the test results, I would like to have the slide name, with the rest of the information. Is there a complete tutorial I can review to show me how to.

Hi Lisa,
What I understood from your question is: SAP is generating a file and you want to add few more things to that file in XI.
If we both are on the same page then you can create a xsd or extend the current xsd with the additional fields and then can load the file and send across XI.
If we are not on the same page then can you throw some more light on this?
Regards,
---Satish

How to change name of home file on mac

Hi, not entirely sure of the name of this file. Currently it is "anthonycullinane" which is my fathers name, it was changed when my iMac was taken into an apple store for a service, i don't have a clue why it would've been changed but i'd like to change it back
if you look in the favourites bar in the finder window you'll see what i mean.
I've attempted to "unlock" the file to allow changes to be made but there is no option to rename the file. The text input is grey and doesn't allow change

You cannot rename your user account name easily. You need to do some extra steps and use the root user, so be very careful and make a backup of your files before modifying anything.
Then, follow these steps > http://support.apple.com/kb/ht1428

Assigning Name to XML file

Hi Y'all,
I'd like the XML file name being submitted with "Submit via Email" button be value entered in one of the required text fields.
In current case name of the field is ClubNumber. For xample if user entered 22155 in the field, the XML file would be named 22155.xml.
How can I do that?
Thanks,

You can set the subject line using the ?subject= parameter in the mailto target. For example:
if (SCODAchievementsData.rawValue != null)
var oSubmitTarget = this.resolveNode("#event.#submit").target;
var nLoc = oSubmitTarget.indexOf("?subject=");
if (nLoc > -1)
var target = oSubmitTarget.substring(0, nLoc);
this.resolveNode("#event.#submit").target = target + "?subject=" + SCODAchievementsData.rawValue;

Changing names for compressor files, nothing works yet.

I've read different posts on how people have to change the name of the file before compressor will complete any sort of compression.
Happened to me too constantly. So I'd just change the name once I got that red exclamation mark and then it would just finish compressing just fine.
This time I changed the name before I clicked submit.
The name of the file was Animal Control.
But before clicking submit I named it Animal Control Audio, and Animal Control Video for both files.
And I still got the stall out with the red exclamation mark.
This is no good since I feel like I can now no longer rely on Compressor if I need go go somewhere.
Thanks for any solution to my misunderstanding of the program.

I'm having a hard time understanding your question. When exactly are you getting the exclamation mark warning, before or after submitting?
If you're watching the History window in Compressor after submitting your encoding batch, then QMaster writes a file with the name you specified. In this case, when Compressor is still the front-most app, it will see that new file being written in your destination directory, and will put up the exclamation mark ... this is normal behavior.
Also, have you tried setting a different destination to see if this clears up whatever problem you're having?

Changing /updating an xml file using JAXP(DOM)

Hello,
i am fairly new to xml and am using it in my degree project.I am able to retrieve and read data from a fairly large xml file using JAXP(DOM) and/or XMLBeans.I am having difficulties in updating the xml document. Any updation i believe is ito be saved into a new xml document,but dont know how to proceed with it. Any help would be appreciated.
Following is a snippet of my code using JAXP. Here i am able to retrieve data from the source file.
File document=new File("C:\\tester.xml");
try {
DocumentBuilderFactory factory
= DocumentBuilderFactory.newInstance();
DocumentBuilder parserr = factory.newDocumentBuilder();
Document doc=parserr.parse(document);
System.out.println(document + " is well-formed.");
NodeList n2=doc.getElementsByTagName("Top");
NodeList n3=doc.getElementsByTagName("Base");
int x=n2.getLength();
System.out.println("There are " x "players");
for(int g=0;g<=x;g++)
System.out.println("Top is" + n2.item(g).getFirstChild().getNodeValue()+" Base is" +n3.item(g).getFirstChild().getNodeValue());
--------------------------------------------------------------------------------

Following is my updation code to the dom tree:
NodeList list=doc.getElementsByTagName("Information");
for(int i=0; i<list.getLength();i++){
Node thissampnode=list.item(i);
Node thisNameNode=thissampnode.getFirstChild();
if(thisNameNode==null) continue;
if(thisNameNode.getFirstChild()==null)continue;
// if(thisNameNode.getFirstChild() !(instanceof org.w3c.dom.Text) continue;
String data=thisNameNode.getFirstChild().getNodeValue();
if (! data.equals("0.59")) continue;
Node newsampNode = doc.createElement("Samp");
Node newsampTopNode = doc.createElement("Top");
Text tnNode = doc.createTextNode("0.50");
newsampTopNode.appendChild(tnNode);
Element newsampRef = doc.createElement("Ref");
Text tsr = doc.createTextNode("0");
newsampRef.appendChild(tsr);
Element newsampType = doc.createElement("Type");
Text tt = doc.createTextNode("z");
newsampType.appendChild(tt);
Element newsampbase = doc.createElement("Base");
Text sb = doc.createTextNode("0.55");
newsampbase.appendChild(sb);
newsampNode.appendChild(newsampTopNode);
newsampNode.appendChild(newsampRef);
newsampNode.appendChild(newsampType);
newsampNode.appendChild(newsampbase);
rootNode.insertBefore(newsampNode, thissampnode);
Here i dont see any changes to the original xml source file.

File Adapter Module - Change name of Generated File

Hello all,
My customer has XI v3.0 SP9. For the moment an upgrade is not envisaged.
Since SP14 it is possible to dynamically change filename generated with receiver File adapter. This is done with a manipulation during mapping and a configuration in adapter.
As I am in SP9, is there another solution, by example using a module processor ?
My XML :
<root>
    <lineFile>....</lineFile>
    <lineFile>....</lineFile>
    <lineFile>....</lineFile>
    <filename>
</root>
Thanks a lot,
J.C.

Hi,
AFAIK - as far as I know
>>>>(Too much tests to do on other processes)
it's good this way the customer will learn the need for test tools
like mercury loadrunner - you can store all the tests inside
and when an upgreade comes just execute them...
customers always learn the hard way
Regards,
michal

How to change name of uploaded file

I am using the a multi-part form and the pl/sql gateway to enable users to upload files to portal. The files automatically get stored in the wwdoc_document$ table. The key to the file is a column called "name" which consists of a sequence number and the file type e.g. 4747.gif.. I want to change this name to a different value.
When I change it using the standard sql Update statement, none of the pdk apis work on the record; they all return errors. I am able to change this value as long as I use a unique value, I just can't run any of the wwdoc apis against the row after that.
Does anyone know how to change this value for a given row???
Mike Kleiman

See Upload taglib in Coldtags suite:
http://www.servletsuite.com/servlets/uptag.htm

Change name of .xml file.

Similar Messages

Maybe you are looking for