Change of Domain.

Hi I have change one Domain >
           Data type            No. of Characters        Decimal Places
OLD      DEC                       5                                2
New      DEC                       5                                <b><u>4</u></b>
When we transported the domain, it is creating short dump. Is there anything I missed in above change?
This is an urgent issue. Kindly respond.
Thank you.
Ashish

Hi Asish,
Yes, you do need to activate after changes are done.
Usually when you reactivate the domain, system will show the tables(s) and structure(s) which get impact and ask you to reactivate as well.
Regards,
Ferry Lianto

Similar Messages

Interesting Presence issue and changing the domain

I've got an interesting problem that I recently posted about in a different discussion forum.
Basically I've got a presence setup. This is federated with an OCS. The OCS domain is something like company.com This is the same as the email domain, and the SIP uri's are sip:[email protected]
The issue is that when the presence server was set up, the proxy domain was set as something like cmp.local. cmp.local is the domain for the entire internal MS infrastructure. The problem appears to be that this conflicts with the internal domain. So when looking up in the directory instead of getting the OCS domain it gets replaced with the cmp.local. Functionally this results in the jabber client being unable to add federated OCS contacts from the directory as they just get added as internal jabber contacts.
I'm thinking of changing the domain on the presence server to something like jabber-cmp.local, i.e. a domain that doesnt exist. Once we migrate to jabber we'll change the domain again back to company.local so we can federate externally properly. Does anyone have any experience of doing something similar? Any pitfalls anyone can point out?

Federation can only be setup a few ways
- Intra domain (company.com   federated to im.company.com)
- inter domain (company.com federated to abc.com)
- Intra domain partitioned (Company.com federated to company.com)
You need to define this to make any of the with CUPS 8.6.4 (you should run latest and greatest).   Now, depending on which version OCS you have R1 or R2 is important as well.
Put the CUPS server in the domain you want it in. Some of the SIP paramenters can be pushed for Jabber 4 windows XML file IE:
msRTCSIP-PrimaryUserAddress
true
sip:>

Change of Domain name and IP address - Urgent requirement

Hi,
The Oracle internet directory is installed as a separate component and we have a requirement for changing the ipaddress and domain name . Could any one please tell me what steps need to be done or any related documents for changing the domain name of OID.
thanks in advance.
regds,
hussain

Refer following for 10.1.2:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#BABJGDBH
Hope this will help.
Thanks
Shail

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Changed the domain of the server where BO Edge is installed

We changed the domain of the server where BO Edge resided and the domain of our database server. We are not getting the error message "Failed to register with name server. Reason: a server of this name already exists". This occurs whenever we try to start any of the servers from the CCM. What are or did we do wrong?

My understanding is that Edge is the same base code as XI 3.0 and it shouldn't have any errors when changing domain name or hostname. I don't have this version installed but in the CCM is there a CMS (+other services) or a SIA?
I'm not sure what changing the domain on the DB server would do, What type of DB are you using?
Regards,
Tim

Business Catalyst Help | Change the domain name of your site

This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/change-site-domain.html

@minshallcreative - Please reach our direct chat support and provide the site name so they can investigate this ASAP.
http://helpx.adobe.com/contact.html?product=business-catalyst
Kind regards,
-Sidney

Changing a domain on windows 8

Hi can anyone tell me how to change a domain for a system administrator? I bought a laptop and can not do any upgrades to it do to the system administrator blocking it. according to instructions to go to control panel and performance and maintenance the
system however my control panel does not have "performance and maintenance" listed on it... so where do I go to find out how to change the system administrator? thank you for your help

You have posted a question about Windows 8 into a Windows XP forum. Try reposting your question here instead:
https://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w8itprogeneral
Please do not read this sentence. Please ignore the previous sentence.

Anyone Seen this Message Before "Configuration changes for domain saved to the repository."

I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?

This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage?

Change of Domain Name causes loss of podcasts - help please

Hi all
For the past 16 months i've posted monthly podcasts on iTunes. Last month I changed the domain name of the website they were pinged from and (I assume because of this) my podcasts are no longer on iTunes.
What's the best way to get my podcasts back? Do I:
1 - contact iTunes as if this is a brand new podcast and then submit them all?
2 - get iTunes to recognise that they are the same podcasts without having to go through the process for new podcasts (and if so, what is the best way to do that?)
3 - other?
thanks in advance for your help.
Gordon

Refer following for 10.1.2:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/host.htm#BABJGDBH
Hope this will help.
Thanks
Shail

How to change the Domain name of portal

Hi All,
We've developed an application using the WDA(Web Dynpro for ABAP) on BI 7.0 and in this we are displaying the BI reports as well. This whole appliaction works fine when we run this on the BI portal 7.0. But when we run it from the Enterprise Portal 6.0
the reports don't show up and it goes in the never ending loop. After research we found that this is happening because the
Domain names of the BI portal and the Enterprise Portal are not the same. And as per one of the SAP note the prerequisite for the WDA application to run on the EP portal is to have the same domain name on both the portals.
Now we are planning to change the domain name on the BI portal.
Does anyone let me know how and where we need to go and change this Domain name ?
Thanks in advance for your help.
Regards,
Alok Varma

Hi,
first step is to configure your DNS server. There has to be a name resolution for portal.domain.tld to your portal server's IP address.
Right now I don't have access to Visual Administrator, so I cannot check if there is any domain specific configation to be done on the server side.
As for the SSO between your Portal and WDA: you'll have to recreate the portal server certificates and import it into the ABAP system.
The Logon Ticket MYSAPSSO2 has to be issued to the new domain by the portal! If not, your browser won't sent this cookie to the BI system and no SSO data will be transmitted to the BI system.
br,
Tobias

How to change the domain in zee table

hi
how to change the domain in zee table
the domain is activated , i want to change the length.
can anyone help me

Go to SE11.
Give the name of the z-table. Click change.
double click on the data element name and over there again double click on the domain name. So you are in the domain.
There change the length of the domain as per your requirement.

Login problem after change in Domain name of portal

I have installed portal 3.0 Beta on windows 2000. installation has gone fine and everything was working. after this i made change in domain name. for this i ran ssodatan.cmd script (source from metalink).
now i am not able to go by
"http://domain_name/pls/portal30/
it gives the error
"The request for content either timed out, or produced an error, after 0 seconds in the browser"
Still i am able to go by "http://domain_name/pls/portal30_sso/" further if i login as any user, then all user are coming with "login server home page" as initial page.
any idea?
null

Hi Suzette,
I have portal 3.0.6.3.3 Beta i.e apache listener. For this i have not found domain name in registry. i made the following changes in htppd.conf file.
ServerName 194.170.231.141
<VirtualHost 194.170.231.141>
DocumentRoot E:\ORAPOR\Apache\Apache\htdocs
ServerName www.ahi-carrier.co.ae
ServerAlias ahiweb 194.170.231.141
</VirtualHost>
This 194.170.231.141 is my Fixed Internet IP.
my webserver machine name, where the oracle portal is installed is ahiweb(192.168.0.247).
also i have firewall before the web server.
Is these settings are OK for Portal.
I am using apache listener for my developer forms and reports, and they are working fine with these setting on the internet.
can i get white paper for these settings.
Thanks
null

Zombie Changes to Domain/Host Name in Mail Settings Window

For the second time since setting it up, the domain name has changed from "domain.com" to "local", and the host name has changed from "myserver.domain.com" to "myserver.local".
This tends to screw up my mail services.
I cannot determine why this would change, by itself, without any external intervention from anyone.
Suggestions?

Thanks for your reply!
The server is configured with static IP and running DHCP, DNS and mail, connectet to a D-Link router (the router also acting as a firewall). The DNS is configured with forwarder IP-addresses to the ISP and Google. Domain/hostname is changed from server.ljungh.net to server.local in postfix/main.cf (and other config files) and triggered if internet connection is lost by rebooting the router (or if internet connection to ISP is down for some other reason). Everything is working fine as long as the internet is up and running. The server is not acting as a firewall or multiple-network-controller.
Output from changeip -checkhostname:
Primary address = 192.168.0.196
Current HostName = server.ljungh.net
DNS HostName = server.ljungh.net
The names match. There is nothing to change.
dirserv:success = "success"
Output from dig server.ljungh.net:
; <<>> DiG 9.6.0-APPLE-P2 <<>> server.ljungh.net
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61515
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;server.ljungh.net. IN A
;; ANSWER SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; AUTHORITY SECTION:
ljungh.net. 10800 IN NS server.ljungh.net.
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:45:38 2010
;; MSG SIZE rcvd: 65
Output from dig -x 192.168.0.196:
; <<>> DiG 9.6.0-APPLE-P2 <<>> -x 192.168.0.196
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27573
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
;; QUESTION SECTION:
;196.0.168.192.in-addr.arpa. IN PTR
;; ANSWER SECTION:
196.0.168.192.in-addr.arpa. 10800 IN PTR server.ljungh.net.
;; AUTHORITY SECTION:
0.168.192.in-addr.arpa. 10800 IN NS server.ljungh.net.
;; ADDITIONAL SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:46:01 2010
;; MSG SIZE rcvd: 105

How to change (NT)Domain Name after installed ERP?

Hello,
We are planning to change (NT) Domain Name on environment of already installed ERP/BW(WAS 6.40)/SRM/SolMan(NW 7.0).
We know SAP recommend that customer should be Re-install or System-copy SAP-System if the Domain name is changed after installed systems.
However, we do not have enough time and budget for doing that.
Questions:
1). If the (NT) Domain name will be changed, we only need to change the
OS users of service for SAP-System?
(I think that it is needed to change only OS-users of SAP-service. Is there other setting for that?)
2). The method of only changing users of SAP-service is not supported in this case?
(The customer will be not taken the SAP-Official support after doing that?)

Dear
Changing domain name is not supported by SAP if done in a productive environment (after systems have gone live).
You will probably not get support by SAP after you change the domain name once system is live.
There are a bunch of changes you will need to perform as well.
The domain name is probably existing in the RFC's and you cannot change all of those through SM59.
You will need to update those entries at Oracle level.
SAP parameters containing domain name
Java environment where domain name is contained
Reset hostname buffer
Service marketplace
SAP Logon
STMS
Monitoring perhaps, non SAP job scheduling
Please reward points accordingly
Kind regards
Tom

How can i change regulatory domain C to A of access point

Recently my office got an access point - (AIR-CAP2602E-C-K9) which is not synchronizing with controller (AIR-CT2504-5-K9 )as it is in domain A , all other AP also in domain A. Now can i change the domain of access point or what is the possible solution to add new AP with controller ? is it possible to run both domain (A, C) at the same time with one controller ?

Migrating Access Points from the -J Regulatory Domain to the -U Regulatory Domain
The Japanese government has changed its 5-GHz radio spectrum regulations. These regulations allow a field upgrade of 802.11a 5-GHz radios. Japan allows three frequency sets:
•J52 = 34 (5170 MHz), 38 (5190 MHz), 42 (5210 MHz), 46 (5230 MHz)
•W52 = 36 (5180 MHz), 40 (5200 MHz), 44 (5220 MHz), 48 (5240 MHz)
•W53 = 52 (5260 MHz), 56 (5280 MHz), 60 (5300 MHz), 64 (5320 MHz)
Cisco has organized these frequency sets into the following regulatory domains:
•-J regulatory domain = J52
•-P regulatory domain = W52 + W53
•-U regulatory domain = W52
Regulatory domains are used by Cisco to organize the legal frequencies of the world into logical groups. For example, most of the European countries are included in the -E regulatory domain. Cisco access points are configured for a specific regulatory domain at the factory and, with the exception of this migration process, never change. The regulatory domain is assigned per radio, so an access point's 802.11a and 802.11b/g radios may be assigned to different domains.
For more information please refer to the link-
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/321930RN.html#wp111182

Change of Domain.

Similar Messages

Maybe you are looking for