Change of infoarea hierarchy

Hi,
i transported a quality cube with necessary objecs option.
this created many unnecessary objecs in the system.
it created "Quality Management" infoarea as a sub node under "unassigned" node.
i want this to be one of the parent nodes and not under any other node.
what can i do?
thank u in advance

Hi S B,
The reason for inclusion of your Infoarea under Unassigned Node may be that in the source system, your "Quality Management" might be having some parent Infoarea assigned, which you may not be transporting to target system. You can check the parent Infoarea assignment in the table RSDAREA.
There are two solutions for your problem, if I have understood it correctly:
1) Find its parent node(infoarea) and transport it prior to transporting ur "Quality Management" infoarea.
2) Else, go the the table RSDAREA, manipulate the parent infoarea entry. This option is not fool-proof as the DB tables might have interdependency. You have to experiment.

Similar Messages

  • Problems with InfoArea Hierarchy ( 0INFOPROV - INFOAREAHIER )

    We are securing our BI data using the InfoArea Hierarchy (INFOAREAHIER).  When trying to set up the 0TCAIPROV characteristic in an analysis authorization, we get the following error: 
    System error in program CL_RRHI_INCL_CREATOR_TID and form FINDDOUBLICATES-1- (see long text)
    We get this message when trying to populate the 'Nodes", after the hierarchy has been selected.
    I found an SAP Note (954673) that sounds like it would address the problem but it doesn't.
    Other issues that we have with this Hierarchy:
    The hierarchy is hidden when trying to locate it in RSA1.  All other hierarchies appear under the info object that it pertains to, but this one cannot be located.  This also seems to be fixed in a SAP note (960176) but we are at support pack 17 and still have the problem.
    Any time we make a change to the hierarchy, it appears that the changes are not "activated" until the following day....the new nodes, changes, etc are not available to be used until the next day.  If an info provider is moved from one node to another, the security authorizations treat the info provider  as being in it's old node until the next day.  Our Basis team is not aware of any nightly process that would be causing this.
    Any help with these issues would be greatly appreciated.

    Let's just keep this one alive.  When we try to make changes to the infoarea hierarchy in RSA1, like add a node, our security is ruined and we lose one of the main table entries that controls security in table RSRHIEDIR_OLAP.  We can only maintain the hierarchy in transaction RSA1OLD.
    Anyone know how to get around that?

  • CO-PA Realignment: Changes in Product Hierarchy

    Hello all,
    We have changed the product hierarchy on some of our materials and we want to realign the PA data to reflect the same.
    Our product hierarchy which we have three levels is maintained in KES1. There are no derivation rules. KES1 is updated manually everytime any changes occur.
    For example:
    OLD
    Product: 1-189-01
    Hierarchy 1: 100
    Hierarchy 2:A7300
    Hierarchy3: B56220
    So on the material master the prod hierarchy is 100A7300B56220
    NEW
    Product: 1-189-01
    Hierarchy 1: 125
    Hierarchy 2:A7500
    Hierarchy3: B56120
    I tried using KEND for realignment and this does not change anything. Any help, how to proceed with the realignment is appreciated.

    Hi Anusha,
    Did u also update PH level in KES3 - in specific hierarchy variant ? Also would like to know how did u reset the operating concern
    Thanks,
    Samik (SAP MM)

  • Change the standard hierarchy

    Hi, I want to know the effects that I could have if I change the standard hierarchy of my Cost Center Group.

    Elsa,
    You could change your standard hierarchy but after you will have problem with your analyses.
    you will not be able to compare yours data. The reports are based one the Standard hierarchy.
    But if your can explain the differences to your company ....
    Regards
    Valérie
    Message was edited by: valerie secondy

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregat

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data 0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING , Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ? YES or NO
    2) If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that Aggregate TRT has new values and perfect values for 0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • How to make Attribute Change run alignment & Hierarchy changes in Aggregate

    Hello
    I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
    I posted previously the same question but there were not good answers and i was not able to understand clearly .....
    If there is Process chain XXY which makes Attribute change run for Master Data   0SPELLING ?
    Now there is Aggregate TRT which includes :
    0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
    Now pls answer following question ?
    1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING ,   Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ?         YES or NO
    2)  If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY  completes and finish job ?
    3) If No, then what steps are suppose to be DONE so as to make sure that  Aggregate TRT has new values and perfect values for  0SPELLING ?
    Please answer and coorect if i have any wrong question....

    for e.g.
    u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
    so do ur aggregates on day1 with same values
    now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
    with data load u will load the data with version M of modified and is not available for reporting
    If u do attribute change run then this modified version is activated to A i.e. active version .
    It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
    now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
    if u roll up aggregate before attribute change run , new data is not avaialable for reporting
    if u roll up aggregate after attribute change run, then data is available for reporting
    if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
    this is how it works

  • Changing Activated Article Hierarchy Structure

    Hi Experts,
    Is it possible to change Activated Article Hierarchy in IS Retail ECC 6.0.
    When i try to do in Tcode: WMATGRP02, system is throwing following Error Message.
    "" Only limited changes are possible to active article hierarchies     Message no. RTCMMD058
    Diagnosis
        Every change to an active material hierarchy has a direct impact on the
        applications that use the data of an active hierarchy (for example,
        merchandise planning, assortment planning, reporting, etc.)
        Only limited changes to active material hierarchies are possible.
        Changes are only allowed to the material assignment.
        Node assignments can be displayed. ""
    Any Input is highly appreciated.
    Thanks and Regards,
    Selvakumar. M

    hi Selva, I'm curious on how the above has been resolved. I'm new to Retail and would like to get your inputs on whether an active hierarchy can still be changed and if so, what are the steps (trying to add another level to an existing node, e.g. new sub-department under an existing department). Appreciate your inputs. Thanks!

  • How to change standard PCA hierarchy for Controlling Area?

    Dear all,
    I'd like to change standard PCA hierarchy for Controlling Area. System doesn't allow me to do this with the following message:
    =====================================
    Standard hierarchy CIS for COAr 0700 already contains profit center(s)
    Message no. KM160
    Diagnosis
    You wish to change the standard hierarchy of a controlling area, however, profit centers have already been assigned to the hierarchy. For this reason, you may not change the standard hierarchy for this controlling area.
    =====================================
    How can I change it?

    I will clarify the business requirements behind this request.
    We are currently implementing PCA for a customer. However, technically, PCA was already switched on several years ago and it was used for some not-really-accounting customer functionalities (Z* reports) .
    So, currently the PCA hierarchy is total mess. No logical heirarchy, a lot of weird profit centers... Not posibly to use this for segment reporting at all. And I would like to sort this out for this project.
    Is it possible to reorganize current standard hierarchy? Remove profit centers and profit center groups out of there? Forbid postings?

  • Change Org.unit Hierarchy

    Hi,
    I want to change hierarchy of organization unit X111 immediately after X1.
    Ex:
    Existing
    Root X
            |_X1
                |_X11
                |     |_X111
                |_X12
    Required
    Root X
            |_X1
                |_X11
                |_X111
                |_X12
    Under Org.Unit X111 some employees exist. Live Payroll run at least for 1 year completed.
    Is it preferable to change org. unit report to link from X11 to X1.
    What will be implications ?
    regard,
    Chintan

    Hi Chintan,
    Go to T Code: PPOME
    According to your EX: Select X111, click on it and drag and drop it in X1. So that automatically the link flow over there. Hope there will not be any prob in payroll.
    If found useful awrad points
    Regards,
    Madhu Sudhanan

  • Product description is missing in CRM after change of material hierarchy

    hello everybody
    We have R/3 4.6c and CRM 4.0
    We change material hierarchy in R/3, a Bdoc is created and the product hierarchy is changed but the product description is empty after the change.
    any ideas what might be the problem?
    thanks in abvance

    Hi Nikos,
    you've marked you question as answerd. What was the solution?
    Regards
    Gregor

  • Changing the dimension hierarchy level keys in RPD online mode caused issue

    Hi,
    We tried to correct the dimension hierarchy level keys and remove prefered drill path settings in the business model layer in RPD in online mode. However this caused all the reports and dashboards based off of this subject area to show incorrect, and/or restricted data. The physical query generated by the answers requests were also incorrect.
    Even restarting the server and presentation services could not resolve the issue. Can someone please help us to understand what could have caused this issue?
    Thanks in advance

    Hi,
    I am not sure why the existing reports throw an error when I change the RPD dimension hierarchy level keys. Does anyone know how I resolve this issue.
    This is urgent. Any help will be most appreciated.
    Thanks in advance.

  • Change to dependent hierarchy

    Hi Gurus,
    I would like to know what is the impact of change the hierarchy properties from no time dependent to time dependent hierarchy, at present we are uploading any change from flat files but now we want to change to time dependent hierarchy, the problem...i don't know the impact of this as we have a lot of infocubes that contain this characteristic and queries as well.
    Could anyone please advice
    thanks a lot,
    Victor

    Hi Victor:
       Take a look at the examples on this URL.
    http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a6702e07211d2acb80000e829fbfe/content.htm
    Regards,
    Francisco Milán.

  • Planning getting hanged when i change a member hierarchy

    Hi,
    When i try to change the hierarchy of a member by cutting and pasting it or through outlineload.cmd, planning is getting hanged. I get java heap space error. We have set the intial and max heap size in the registry as
    1. Initial heap size = -Xms1024m
    2. Max heap size = -Xmx1024m
    Even the planning service is not responding. And planning web is not even opening now.
    There is another entry in the registry named JVMOption10 = -Xss256k.
    What has to be done?
    Regards,
    Ragav.
    Edited by: ragavhere on Mar 25, 2011 6:52 PM
    Edited by: ragavhere on Mar 25, 2011 7:01 PM

    Hi John,
    There was workflow enabled for a particular scenario. I've cleared it. Now i am able to delete. Thanks a lot.
    But otherwise when workflow is enabled and if i have to change the hierarchy, how is this scenario managed? Is this the only way?
    Regards,
    Ragav.

  • How profit center node can be change in standard hierarchy

    Hi All,
    Please help me to know, can we make changes to the node of profit center or of a profit center group after activating both, through KCH5N.
    Thanks & Regards,
    Prafful Kansal

    Prafful,
    Yes, you can make changes to the nodes of std hierarchy.
    Please select your std hierarchy of Profit Center in KCH2. Then you select the Profit Center Group or profit center by pressng F9 after putting the cursor on the same. Now, the screen get three new buttons to deselect, insert at same level and insert at lower level. By utilising these buttons to insert the selected PC or PC group to next node at the same level or lower level. You need to put the curson on the Prroft Center Group and select the button according to the requirement. Once, your work is over, you can save. If you made mistake, you can come out without saving. This functionality of select and insert, is same like drag and drop. One time exercise will make you master in this.
    Trust this helps much
    Cheers,

  • How to change back Std Hierarchy layout in OKEON after using object mgr?

    Hi guyz,
    I was using object manager in OKEON to find a certain cost center.
    However, the layout only displaying one sub group instead of overall view of the Standard Hierarchy the way it was (before I use Object Manager function).
    I need to change back the layout to overall view of the Standard Hierarchy consisting of all subgroups and all cost centers.
    How to change it back?
    Need your answers asap...Thanking you

    Solved by clicking cost center group in Object Manager and fill with Standard Hierarchy's name (Top node of the standard hierarchy)

Maybe you are looking for

  • No Bluetooth after install Windows 8.1 - Model: pavilion dv6 6080se

    Hi please help me there is no blutooth driver & software after install windows 8.1 pro 64bit i used all of past ver. drivers, but it says, your bluetooth device not connected i installed hp support asistant, i used windows update and check optional u

  • Using Import Statement

    Hi, I understand that in order to access the methods of a different class, I can "import" it. Here is my question though: Where am I importing it from? I mean, surely if I am importing a class from e.g. the Java.util package, doesn't this package nee

  • Opening Illustrator CS2 docs in CS

    Can you open files made in CS2 with CS without downsaving to CS2? If so, do you lose anything? I need to know this as my work is getting CS for me and CS2 for my coworker and we will be working on the same files. Will everything be completely the sam

  • Unable to get FaceTime working, Unable to get FaceTime working

    Recently purchased a new imac which comes with facetime. Have been attempting to communicate with friends, unfortunately unable to get working, any ideas?

  • Punctuation and comma keys do not respond

    Macbook Air 11" - 2012 running Lion. The period and the comma keys appear to be "dead" - not responding, also not when shift or other keys pressed simultaneous. All other keys appear to function as usual. There was no prior incident - they simply sto