Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

Similar Messages

  • Appended Key figure is not working in Delta reverse record

    Dear All,
    I have enhanced 2LIS_11_VASCL datasource, to pull value from condition record, called Surchage.
    I have set reversal indicator for this field in my datasource. I have written code in CMOD to get this value from KONV table of that sales order.
    Now when value  is changed, delta record for this, automatically creates reversal record, but it shows new value of surcharge as negative, because that code is pulling value which currently exists in table.
    For example for order 350089 , if surchage is $ 100 .  User changes it to $200
    Then I get following record.
    Reversal Record  - $200 (This should be instead -$100 , i.e. previous value)
    New Record - $100.
    Because of this my new value is not getting updated in table.
    I can't use overwrite mode in ODS because some other technical reason.
    How can I solve this problem?
    appended Key figure is not working in Delta reverse record

    LIS have before-after delta. So ODS should be in Overwrite mode. If that is not possible.. try sorting the records in Start Routine such way that the - 100 $ is above the - 200 $ records in Data Package.
    but this is risky as it will affect other key figures for which things maybe fine. I guess you need take Data Package records in an internal table. And then sort this internal table. then you can read the internal table in update routine of this key figure.
    OR (If you are on BI 7.0) you introduce an InfoSource in between DS and DSO with Overwrite mode for this Key Figure.

  • LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

    Hello ,
    I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
    My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
    have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

    Hi Victor,
    The List of values we will assign in universe in order to get filtered data works on universe query panel
    but the same objects when i am using in report(webi report) , the List of values are not working .i.e
    they are not getting displayed in webi report.
    for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
    the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
    please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2  , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
    the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
    but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
    kindly help me with the issue

  • Change Order of key figures

    Hi Gurus,
    We are using BI 7.0. & MS excel 2003 & 2007 both.
    I've designed a query with 10 Key figures.
    After execution, based on Key figures I have Added Local Formula in query.
    Now I want to change the order of Key Figures and bring Newly added Local Formula column at 3rd position.
    I've tried using Select Filter... and changed the order of column as I want, but this doesn't work.
    I can drag the column & drop it at desired position. It's working that way in office 2003.
    But in office 2007, Drag and Drop not working at all. Even for characteristics also.
    Is this problem with BEx Excel Patch? I've installed excel patch for both 2003 & 2007. But still not working properly.
    Please suggest. If you know latest patch available for office 2003 & 2007, please suggest.
    Thanks.

    HI,
    I am on BI7, Excel 2007
    Drag and Drop Functionality for both Char & KF is working fine including the placement of Local Formula.
    seems you need to check with the Basis Team for proper installation of the BEx Excel patch
    Regards
    ReddY A

  • "Execute" is not working in web reports

    Friends,
    " Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
    Joe

    Also check this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
    Hope it Helps
    Chetan
    @CP..

  • List key figures in navigation panel of web report

    Hi,
    I have the standard navigation panel on the left side of my web report that shows a list of the characteristics in rows and a list of free characteristics. Under the heading columns I can see the point key figures.
    Is there any possibility to list all the key figures that are included in the report so that I can use the drag and drop function for adding / removing key figures?

    Philipp,
    Since Key figures is a structure, you cant see all the key figures under that area. What you can do is, you can restrict the keyfigures in the WAD report itself based upon your selection.
    Hope it helps,
    Assign Points
    Thanks,
    Gattu

  • Key figure Attributes not working

    Hi ALL,
    We have an isuue with one of our Planning book. Key figures which are supposed to be open for editing are  showing as output only and key figures which are for output only are showing as open for editing.
    I went to design mode to tried to change in manually , if I chane one row attribute all rows are getting changed.
    I found a macro which assigns Key figure attributes which I tried to activate but still not working. We are using SAP SCM 4.1 Version.
    Can any advice on this?
    Sivarama

    Thanks Problem is now solved. Looks like some has made changes in the design and there are macros which are working and as you said they might be conflicting. I changed the design which was working weired yesterday when I tried to cande one row attribute and all rows are getting applied, this worked fine today. And I deactivated the macro which is working on some row attributes and activated again.
    I am not very clear what went right but working.
    Sivarama

  • Average in Results row in calculation properties for Bex Key figure does not work in Analysis for Office 1.4.7

    We are moving from Bex 3.5 to Bex 7.0 and using Analysis for Office 1.4.7
    We have queries that do an average for the results rows of dynamic calculations and the queries will not open in Analysis for Office 1.4.7 (example is below)
    We get an error message that can be found below
    We were able to open the queries in Analysis 1.4.5 with the correct results.
    We do not understand why it worked in an older version and not the new one.
    Is there something missing in the version 1.4.7 of Analysis for Office that is preventing our queries from running?
    We do not want to move back to 1.4.5 because the performance is better in 1.4.7.
    Help.....

    Hi Patty,
    I just checked 1.4.7 by making "Calculate Results As.." for Key figure and formula to Average(and also tried others as well). No error is coming in Analysis Office. reason might be because of other reason
    Any way, As Tammy Powlas suggested can you check with SP8

  • Key figures are not appearing in the reports ?

    Hi Guys,
    After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

    Hi,
    can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
    Ingo

  • Query Filters not working in webi report.

    Hi all,
    I have a bex query where i have some filters on Key figures but when i run that query on webi report i dont get exact data as in bex...
    There are no other filters i have applied in webi, but i am not able to see the exact data..?
    what may be the issue....

    Thanks for the earliest reply.......
    I am using Business object XI 3.1 SP 1 FP 0.882.
    In webi i can see all the values i.e I have applied filter on key figure TARGET GI QUANITY which brings only that quantity which has missing parts.
    But i get all the quantity in my webi report.
    so what can be the issuse....?

  • Tab not working on ALV report output in Persona

    In normal SAP GUI we can move the cursor position on ALV report output between different column by pressing TAB on keyboard. But in case of persona 2.00, TAB doesn't work and we have to click on each cell of the report output whatever we want to highlight. Is there any settings or SAP note we can implement to so TAB will work on persona.
    Thanks,
    harkamal

    Hi Devendra Singh,
    I think it's not possible to show all field values in another Language (Eg Thai) But it's possible if it's short Text, Long Text etc
    SE63 and follow menu
    Translation
    ABAP Objects
    Short Text / Long Text Etc..
    AND
    Translation
    NON ABAP Objects
    For that also you have to maintain it first in SE63..
    [SAP Help1|http://help.sap.com/erp2005_ehp_04/helpdata/EN/77/5719d2492011d1894a0000e829fbbd/frameset.htm]
    [SAP Help2|http://help.sap.com/erp2005_ehp_04/helpdata/EN/b4/54601d77f38e429ffad9e3e11c1b25/frameset.htm]
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Query level filter not working in Webi report

    Hi All,
    I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
    Can anyone suggest me why problem is coming?
    Regards,

    Hi,
    Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
    1. Select the universe in the list of universes to open the Query Panel.
    2. Drag the Year object to the Result Objects pane.
    3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
    4. Click Combined Query.
    The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
    5. Click on the second query and remove the Year and Number of Guests objects.
    6. Drag the Reservation Year object to the Result Objects pane.
    7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
    8. Click Run Query.
    Best Regards
    Naveen

  • Zero Rows suppression is not working in Webi report.

    Hello Gurus,
    I have created a Web' report on top of BEx query. I am getting the report with Zero values. I want to suppress the rows with Zero values. When I ran the same query in BEx it is suppressing the zeros. (I have the property to suppress the Zero values int he query as active). Why Webi report is not recoginizing the property of the BEx query.
    Please advise.
    Thanks,
    Aruna..

    Hello,
    I am facing the similar problem...I want to suppress 0 values in my report. I am using RDBMS - BOXI 3.1 SP1 (Reporting through Webi)
    I have tried the above mentioned filter at Webi Level, but no luck.
    Description       p1       p2       p3
    Wages              0         0         0
    Exp                   100      25       50
    My requirement is the row, with all the columns with 0 should be suppressed.
    Appreciate your help.
    Thanks,
    Anushka
    Edited by: Anushka Bidesi on Aug 11, 2010 11:38 AM

  • Filter is not working in ALV GRID output using FM 'REUSE_ALV_GRID_DISPLAY'

    Hello Experts,
    I have searched SCN before posting this thread.
    In my report output (by using 'REUSE_ALV_GRID_DISPLAY'), i am trying to filter values which is of type CHAR.
    Unable to filter by char30 field in the report output.
    Tried to filter using the following steps:
    Selected the column which i want to filter-> then selected filter symbol of ALV toolbar.
    Selection screen appeared where select-option of that field displayed.
    Selection screen only allows user to enter 1 character.
    Even though the field contains 30 characters the filed in selection screen appeared with 1char length.
    This is the same for all the fields in that ALV. Please suggest how can i change the field length to original field length.

    In field catalog pass:
    wa_alv_fieldcat-outputlen   = p_len
    Set p_len as 30.
    'FIELD'            text-001   '01' 'X'  '30'  'L'

  • Context Menu not working in Web Reports

    We are on BI 7.0 (ABAP stack only). I am unable to see context menu for 3.X web reports in 7.0 environment when we have "Only Hierarchy Navigation" property checked in web tenplates (WAD 3.X). Where as in production, on 3.0B system (not upgraded) when we have "Only Hierarchy Navigation" property checked in web template i am able to see context menu on header row of the reports. Not sure what i am missing?
    Reposting again to get some attention! Sorry for the duplication.
    Appreciate all your insights.
    Thanks.

    Also check this
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
    Hope it Helps
    Chetan
    @CP..

Maybe you are looking for