Change segment name for Idoc created through BDBG transaction

hi all,
I have created a BO thru SWO1 transaction and then have used BDBG. Now for one of the segments in the IDoC which got generated automatically,i would like to change the segment name.This object was completed long time back and hence was released. Now we have been asked to get the segment name changed. But, when i try to click on the change button it says "<b>the object has been generated and hence cannot be changed"</b> Is there an work around for this? Pls reply. Thanx
Regards,
Venkat

Hi,
I have the same error. Did you solve it?
Regards,
Lyda

Similar Messages

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix.

Table name for Invoice created with PO ref

hi,
I required Table name for Invoice created with PO ref.
Regards,
Ali

HI,
Check the table RSEG: Document Item: Incoming Invoice
Look for the fields BELNR and EBELN
Regards
KK

TAX ASSESSMENT BASIS MISSING IN SEGMENT E1EDK04 FOR IDOC INVOIC

Hello,
Tax assesment basis is missing in segment E1EDK04 for IDOC INVOIC. In EDI messages,Tax assesment basis has to be sent in TAX segment together with VAT rate. When there is only one VAT rate this is not a problem as tax assessment basis is the total net amount (And we have it in the IDOC). On the other hand when there is more than one VAT rate in the invoice, we don't have in the IDOC the Tax assesment basis of each VAT rate.
Did someone experience this issue ? How did you handle it ?
Regards.
Eric.

Dear Eric
The latest pack available now for these components are (for PI 7.1)
SAP BASIS 7.11 support package 6
SAP HR 6.04 with Support Package 44
If you are in PI 7.0 then I suggest you download the latest patch from marketplace.
Sourabh

CHGRDBDIRE change rdb name for new installation.

In the installation guide, SAP advices us to change the *LOCAL relational database name to match the hostname.
However, currently my system already has an *LOCAL rdb name entry which follows the default machine/serial number name . The command using CHGRDBDIRE advised by SAP doesnt allow changing the name for *LOCAL entry.
The only method to change the name is to delete the default *LOCAL rdb name and recreate a new *LOCAL entry. Is it safe do to so ? IT contains the objects the QGPL and QTEMP schema now.

Hi kikco
no problem with that - I did this several times already ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Reverse MIRO document created through MRRL transaction

Hello
How can we reverse MIRO document created through MRRL transaction.
Document cannot be reversed reason being -Error-Invoice doc. 5105692828/2009 was created via evaluated receipt settlement.
Regards,
Umesh Agrawal

hi,
As ERS doc. is created automatically so the data would be correct...
Why you wanna reverse the ERS doc..
If you have any returns/cancellation in between, make the return/cancellation document from MIGo, then again run the ERS, system will create the credit memo for the same...
Regards
Priyanka.P

Any BAPI or FM for O4G1 - Create Load Confirmation transaction - IS Oil

Hi Experts,
I searched for any BAPI or FM for O4G1 - Create Load Confirmation transaction - IS Oil in SDN/Google, but, i did not find any!!
Do we have any BAPI or FM for O4G1 - Create Load Confirmation transaction - IS Oil? pls let me know
Thank yu

Hi Try searching with keyword confirmation in SE37, finally if you dont find any BAPI satisfying your requirement, its better go for BDC.
Regards
Abhii

Email notification for user created through reconciliation in OIM

Hi..
I have done the following configurations for email notification when user is created through reconciliation in OIM
Configuring IT Resource
Name     Email Server
     Type      Mail Server
     Authentication     FALSE
     Server Name     *.*.*.*
     Username
     Password
Creating email definition with the following values
Name     Create User Email Notification
     Type     Provisioning Related
     Language     en
     Region     US
     Object Name     Xellerate User
     Process name     Xellerate User
     From     User
     User Login     Xelsysadm
     Subject      User Created
Add Email notification in a new process task with name Notify
Process definition     Xellerate User
     Task     Notify
     Disable Manual Insert     Enable
     Required for Completion     Enable
     Allow Cancellation while Pending     Enable
     Handler Name     tcComplete Task
     Assignment Rule     Default
     Target Type     User
     User     Xelsysadm
     Email name     Create User Email Notification
     Send Email     Enable
     Notification Assignee     Enable
     Email      Create User Email Notification
     Status     Completed
Xelsysadm has a valid email id. Now when I am reconciling any user, two mail notifications are being sent. Not able to know from where these two notifications are being triggered.
Am i suppose to make any changes in the configurations?
Edited by: Amruta Agarwal on Sep 28, 2011 4:21 AM

Sorry re-read your issue again. I believe there are two notifications because you have added your notify task in the process definition and OIM OOTB sends a notification when a user is recon'd. Thus remove your task or disable the OOTB notification. The property is Recon.SEND_NOTIFICATION
HTH,
BB
Edited by: bbagaria on Oct 7, 2011 9:13 AM

Change pointer technique for idocs

I have to generate idoc whenever some fields of the sales order changes (Transaction VA02)
I thought of doing this using change documents. There is a standard change document object VERKBELEG   for sales order.
In transaction BD52 for the message type ORDRSP I have mentioned the fields names as below (my idea is to generate the idoc when these fields of the sales order changes).
VERKBELEG          VBAP          ABGRU
VERKBELEG          VBAP          KWMENG
VERKBELEG          VBAP          KZWI1
VERKBELEG          VBAP          KZWI2
VERKBELEG          VBAP          MATNR
VERKBELEG          VBAP          PRCTR
VERKBELEG          VBEP          WMENG
VERKBELEG          VBKD          KDKG3
VERKBELEG          VBPA          PARNR
It seems that the report RBDMIDOC will not support for transaction data.
When I tried to execute the report RBDMIDOC by giving message type    ORDRSP in the selection-screen it gave the following error
Message type ORDRSP cannot be sent with change pointers
Message no. B1157
Diagnosis
You attempted to send message tyoe ORDRSP. Unfortunately you cannot choose data for this message type using change pointers.
System Response
The system does not carry out the action.
Procedure
If message type ORDRSP is for master data, it can be sent directly. If it is for transaction data, the message tyoe is sent automatically via the transaction.
is there a way to generate idoc via the transaction VA02 (sales order change) instead of executing the report
RBDMIDOC

Hi Srinivas,
This can be done but some development would be required.
If you know about requirement routines ( transaction VOFM ) you can create your own requiremnet routine for application V1. For reference see routine 002 for V1 .
( program LV61B002 ). You can create your own req routine say 901 for V1 and then assign it in output procedure in NACE for BA00. Output will be generated only when you pass a SY-SUBRC = 0 from the custom routine that you will create .
But another problem would be how to determine whether the field values you have mentioned has changed or not.
You can use user exit MV5AFZZ , subroutine SAVE_DOCUMENT_PREPARE , to analyze your fields .
Here you have XVBAP[] table with ( user ) changed values in current transaction , YVBAP[] with current database state at runtime. ( same is true for XVBKD & YVBKD ) . You can analyze the values and then set a flag here to say that "Generate Output" or "Supress Output" . This single caharacter flag "X" or space you can pass to ABAP memory , which you can read ( import ) in requirement routine ( VOFM ) and then set SY-SUBRC = 4 or 0 depending on this flag value.
Above solution will not mean any modification to SAP .
Otherwise you can also look at OSS note 395569 wherein its a modification but you can achieve desired results.
( You can use the code given here as refernce and put this same code with the solution I have proposed above with some additional checks. )
If answers were helpful reward and close.
Cheers.

How can I Change Asset names for swapped images in duplicated symbols?

I have what seems to be a bug in edge animate cc2014 in following circumstances:
1. Duplicate a symbol
2. Drag duplicate symbol onto stage.4
3. Rename symbol
4. Click to edit symbol
5. Select an image inside the symbol
6. In properties panel change path to swap the image to be used in this instance of the duplicated symbol ( I need to reuse this symbol many times and not being able to change asset names is a real problem!).
7. The names for the asset in both the timeline and the elements were auto generated at the time of duplication when try to change the names they revert back to the auto generated names.
How can I overcome this problem which is clearly a bug or a poorly thought through bit of programming by an otherwise highly competent adobe edge animate tesm
Thank in advance
David.

Again, incorrect. It's not about how I can address a specific symbol with code - no problems there - it's what the composition loads into the symbol. Try it with some complex component or sub- symbols.
Work-Around for using Duplicated and Revised symbols (symbol variants) in the SAME document. Solution.
Tedious, but easy. Low risk. Edge Animate 2014.1.1
When you duplicate a symbol comprised of symbols itself ("sub-symbols"), only the outermost symbol gets a unique name, not it's component inner symbols. Upon import of additional variants, a unique name is created in the Library/Symbols panel for the inner symbols, yet the references in the outer symbol can't update to use those unique inner-symbol names. Therefore, the composition loads the symbol with the matching name. This will be the first variant to be imported.
Make the Duplicate
Duplicate the symbol in the Library/Symbol Panel. Rename. Export.
Prepping the Symbol
Open a new document, import and place the new symbol.
Select the asset to be switched/replaced. Make the switch in the property panel. Properties/Images/Swap button. (I revised my base or source symbol to have different colored background images. This is how I created 4 color variants.)
Save the new document, of course. "Example1.an"
Export the revised symbol from the Library/Symbol Panel for safe keeping.
Return to Example1.an
Elements Panel: Work through the nested symbols, adding a preceding identifier to all symbols in the heirarchy.
*KEEP IT SIMPLE so you can easily and quickly move through the .js files in the following steps.*
Save Example1.an.
Library/Symbols Panel: Go down the list, renaming all the symbols with the same preceding identifier as was used in the Elements Panel. *I advise to stay parallel with the Elements panel. Change as little as possible.*
Disregard any odd appearance you may see on the stage for now.
Save Example1.an
Revising the Code
In Edge Code, also part of the Creative Cloud suite, or any code editor, open the two .js files for "Example1.an." found in the same folder...Edge.js and ...EdgeActions.js
...Edge.js
find "symbolName" - prepend with the identifier whatever is not already prepended.
at the same time, look for "id" nearby - prepend with the identifier whatever is not already prepended.
Save
...EdgeActions.js
First read the grey comments about not degrading the //Edge Comments.
Search the document for "//Edge symbol" - prepend whatever is not already prepended.
Carefully check all the orange text, prepending the symbol names you find. This same code can be seen in your Code Panel with the "Full Code" button.
Save
Return to Edge Animate
When prompted to Reload, say yes.
Save Example1.an
EXPORT your new top level symbol - now a fully separated asset.Now you have created a fully unique symbol, which can be used in conjunction with other variants in the same document.
Import your new, unique symbol variant it into your real document.
This is the solution if your Symptoms are:
I duplicated symbols to make different variations, but now I can't use the duplicated symbol variants together.
When I try to swap images in a duplicated symbol, it succeeds when used alone, but reverts when used with the original symbol.
My duplicated symbol works properly alone, but not when it is used with the original symbol.
My symbol seems to revert to the original source symbol.

Need billing text field name for IDoc mapping

Hi Friends,
our users use CRM web application to send orders to SAP via IDocs. They want to have billing text (In German it is called Rechnungstext or Faktura text) so that they can enter some text here if they want to enter something. My question is, what is the field name and IDoc segment for billing text? We need this information to map in XI.
Br, Sats.

The solution is:
The standard Idoc text segment can be used for the text in sales order. From SD side the text types have to be customized. This is necessary for the XI mapping.
Regards,
Sats.

Change "Description" name for Hyper-V Core for networks

Hello,
i am creating 3 seperate networks for our Hyper-v Environment :
- Core
- Live Migration
- Production
When a multiple network-cards are teamed, the description of a team is : "Microsoft Network Adapter Multiplexor Driver".
I want to change this name to the network-name like "core".
Is this possbile form Hyper-v Server 2012R2 Core?
Thx

Hi Mvd12345,As far as I know network card device description is created by NIC driver .
I'm afraid you can not do that .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Changing Segment Name

Hi all,
what is the impact of changing a KFF segment name?
thanks in advance,

In my opinion there shouldn't be much of an issue if you change the segment name. The possible issues that I foresee are:
1. If there is a self service personalization on this KFF which refers to this segment name, it might go for a toss. For example, there would be an issue if you have personalized the page to display only 3 out of 5 segments defined for the KFF and the list of displayed segments includes the segment that you are modifying. This is because to personalize the KFF you enter the names of the segments to be displayed.
2. And of course, if there is any custom code which refers to the segment names you'll have to update that too.
However, I am a little curious to know why you need to change the name of the segment because in most cases it should suffice to change the Window prompt only.
Regards,
Manish Kataria

Change Pointer Program for IDOC creation..??

To All
Where does the message type is assigned, which allow that type of IDOC getting created in WPMU...??
Can COND_A be created in Change pointer Program...??
If possible ..How...??
Thanks
Sumeet

3)
RBDMOIND to confirm whether idocs have been successfully
dispatched to the receiver..and v can also use this program to change the status of idoc from 3 to 12....
RSNATED is the program used for triggering IDOC for the output type..where the output medium is 6.
And the subroutine that triggers the IDOC in the program is EDI_PROCESSING.
RSNASTED itself determines the associated IDoc outbound function module, executes it to fill the EDIDx tables and passes the prepared IDoc to the port.
You can call the standard processing routines from any ABAP, by executing the following call to the routine. You only have to make sure that the structure NAST is declared with the tables statement in the calling routine and that you fill the at least the key part and the routing information before.
TABLES NAST.
NAST-MANDT = SY-MANDT.
NAST-KSCHL = 'ZEDIK'.
NAST-KAPPL = 'V1'.
NAST-OBJKY = '0012345678'.
NAST-PARNR = 'D012345678'.
PERFORM einzelnachricht_screen(RSNAST00).
Calling einzelnachricht_screen determines how the message is processed. If you want to force the IDoc-processing you can call it directly:
TNAPR-PROGN = ''.
TNAPR-ROUTN = 'ENTRY'.
PERFORM edi_processing(RSNASTED).
~~Guduri

How to change host name for SLD

Hi All,
How is possible to change host name of SLD configuration?
I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
How can i do it?
Thanks a lot!
Alex

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

Change segment name for Idoc created through BDBG transaction

Similar Messages

Maybe you are looking for